Gebruiksaanwijzing /service van het product EB4401 van de fabrikant RedMax
Ga naar pagina of 28
The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. WARNING OWNER / OPERA T OR MANUAL BACKP ACK BLOWER 848L3A93A0 (309) EB4401 Thank you for purchasing a RedMax product.
Read this manual carefully to understand all safety precautions, controls, proper operation and maintenance of your RedMax blower . Failure to do so could result in serious injury .
CONTENTS SAFETY PRECAUTIONS·······························································4 OPERA T OR USE OF BLOWER FUEL WORKING CONDITI.
• Read this Blower Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury. • Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.
• To reduce the risk of injury associated with contacting rotating parts, stop the engine before installing or removing attachments. Do not operate without net in place . Always disconnect the spark plug before performing maintenance or accessing movable parts.
• Avoid using the blower where stable footing and balance are not assured. • Never to touch the spark plug or plug cord while the engine is in operation.
7 (1) Read owner's manual before operating this machine. (2) Wear head, eye and ear protection. (3) Handling this machine improperly could result in accidents causing serious injury or death. Read this manual carefully and practice using the blower until you are fully acquainted with all operations and have learned to use it correctly.
8 For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.
MODEL EB4401 Dimensions ( L x W x H ) mm ( in ) 480 x 535 x 495 (189 x 211 x 195) Dry Weight kg ( lbs ) 8.8 (19.3) Fuel Tank Capacity liter ( fl. oz ) 2.0 (67.6) Engine Type Air cooled 2-cycle gasoline engine Piston Displacement cc ( cu. in ) 41.5 (2.
Fuel 10 ■ RECOMMENDED MIXING RATIO GASOLINE 50:OIL 1 • Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion.
Fuel 11 again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary for the engine to last long. Be careful that, if the agitation is insufficient, there is an increased danger of early piston seizing due to abnormally lean mixture.
12 ■ CONTROL ARM 1.Hold the upper end of the control arm in hand and, while pulling it away from the unit, rotate arm forward (anti-clockwise as the arrow direction) until it clicks. (The first position) And if you want, you can rotate arm more forward until it clicks.
Operation the choke if it was set closed, and let the engine run at idle speed for a minute to warm it up. • When the engine fails to start after several attempts due to overchoking, open the choke and repeat pulling the rope. ■ ADJUSTING IDLE SPEED • The idling speed is set for 2000 rpm at the factory.
14 ■ FUEL FILTER •A clogged fuel filter may cause poor acceleration of the engine. Check periodically to see if the filter is clogged with dirt. The filter can be taken out of the fueling port using a small wire hook. Disconnect the filter assembly from the fuel pipe and unhook the retainer to disassemble it.
■ MUFFLER • Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, do not use the blower and have it repaired immediately. • Note that failing to do so may result in the engine catching on fire.
Storage BEFORE STORING THE BLOWER: 1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel. 2.Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider.
17 Parts List NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.
18 Parts List : EB4401 Fig.1 BLOWER GROUP (S/N 310001 and up).
19 EB4401 Fig.1 BLOWER GROUP (S/N 310001 and up) Key# Part Number Description Q'ty 1 2750-31111 VOLUTE CASE 1 2 2750-31212 VOLUTE COVER 1 3 2750-31150 SCREW M5x25 9 4 3490-11150 ELBOW 1 5.
20 Parts List : EB4401 Fig.2 ENGINE GROUP (S/N 310001 and up).
21 EB4401 Fig.2 ENGINE GROUP (S/N 310001 and up) Key# Part Number Description Q'ty 1 1490-12114 Cylinder 1 2 2756-12210 Gasket, base 1 3 1850-12130 Bolt M5x20 4 4 1484-13161 Insulator 1 5.
22 Parts List : EB4401 Fig.3 CARBURETOR COMPONENTS (S/N 310001 and up) Key# Part Number Description Q'ty 1 1850-81450 Body ass’y 1 2 ————— Screen 1 3 ————— Valve 1 4.
23 Parts List : EB4401 Fig.4 LEVER SET (S/N 310001 and up) Key# Part Number Description Q'ty 1 T4012-25001 LEVER SET 1 2 T4012-25100 • LEVER 1 3 3310-53331 • NUT M5 1 4 01642-20508 .
The California Air Resources Board and KOMATSU ZENOAH are pleased to explain the emission control system warranty on your 1995 and later small off-road engine. In California, new small off-road engines must be designed, built and equipped to meet the state’s stringent anti-smog standards.
EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT, KOMATSU ZENOAH AMERICA INC. (THE COMPANY), THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.
Pièces en rapport avec les émissions de gaz d'échappement : KOMATSU ZENOAH AMERICA INC., par l'intermédiaire de n'importe quel revendeur RedMax, réparera gratuitement ou remplacera.
.
KOMA TSU ZENOAH AMERICA INC. 4344 Shackleford Road Suite 500 Norcross, Georgia 30093.
Een belangrijk punt na aankoop van elk apparaat RedMax EB4401 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen RedMax EB4401 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens RedMax EB4401 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding RedMax EB4401 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over RedMax EB4401 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van RedMax EB4401 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de RedMax EB4401 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met RedMax EB4401 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
