Gebruiksaanwijzing /service van het product 56c van de fabrikant Acer
Ga naar pagina of 23
AcerView 56c Color Monitor 15” (38cm) CRT Size, 13.7” (34.8cm) Max. Viewable Area User’s Manual.
ii Copyright Copyright © 1998 by Acer Peripherals, Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translat.
iii Safety Instructions The AC plug isolates this equipment from the AC supply. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Slots and openings in the cabinet and the back or bottom are provided for ventilation.
iv FCC Class B Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
v CE Declaration This monitor, AcerView 56c, complies with 72/23/EEC and 89/336/EEC modified by 92/31/ECC. These directives refer to EMC. Canadian Department of Communications Regulatory Statement Thi.
vi Table of Contents Table of Contents ......................................................................................... vi Chapter 1 Introduction ..................................................................................... 1- 1 Unpacking the Package .
1- 1 Introduction Introduction Unpacking the Package Check following items. If they are missing or damaged, consult your place of purchase immediately. ü Color monitor ü Swivel base ü ü User’s manual ü ü Power cord ü Locate the model name and the serial number labeled on the back of your monitor.
1- 2 Introduction ü Flicker-free Image The monitor supports high refresh rates up to 85Hz at 1024x768 resolution with VESA’s best recommendation. ü Larger Viewable Size With its 13.7” viewable size, it offers a larger screen than other 15” monitors.
2- 1 Getting Started Getting Started Installing the Swivel Base Place the monitor on its side. Locate the arrow and the four slots at the bottom of the monitor. As directed by the arrow inscribed on the swivel base, insert the four pegs on the base into the slots at the bottom of the monitor.
2- 2 Getting Started Push the swivel base gently toward the front of the monitor until it is locked. Place the monitor back to its normal position..
2- 3 Getting Started Installing the Monitor This monitor is equipped with an autosensing power supply for voltage ranges 90~264V AC, 47~63Hz. Make sure that the system power is turned off. Plug the signal cable into the video signal port of your computer and fix it with the two screws.
.
3- 1 Adjusting the Monitor Adjusting the Monitor A Look at the Control Panel Adjusting the Monitor You can adjust the monitor with the On-Screen Display (OSD) menus. Press the following four keys on the control panel , , , to make necessary settings. Panel key introduction Page switches between function control pages.
3- 2 Adjusting the Monitor Selecting page and making adjustments Grouped by functions, the OSD offers three pages for making adjustments: Display Control, Color Weighting, and User Mode display. Following describes the contents of each page and how you can make adjustments.
3- 3 Adjusting the Monitor H. Position adjusts the horizontal position of the display. Trapezoid makes the vertical edges of the display parallel. H. Size adjusts the display width. Parallelogram corrects image distortions. V. Position adjusts the vertical position of the display.
3- 4 Adjusting the Monitor Following is the setting of each factory default: Factory Default Color Temperature C1 9300K C2 6500K C3 5500K C4 7100K C5 11500K Page 3 User Mode Display This page shows the current resolution, horizontal and vertical frequency status.
3- 5 Adjusting the Monitor F To set the timing and the refresh rate, see the user’s guide of your video card. Reset to Defaults Press and simultaneously to reset the monitor to the default factory settings. Factory Preset Timings Mode Resolution Vertical Frequency (Hz) Horizontal Frequency ( KHz) VGA 640 x 400 70 31.
.
4- 1 Troubleshooting and Useful Hints Troubleshooting and Useful Hints Troubleshooting Make sure that your monitor is properly installed if you have encountered any trouble using this product (For hardware installation, see Chapter 2, Getting Started ) .
4- 2 Troubleshooting and Useful Hints ü Colors are impure. q Check signal cable connector pins. If there are bent or missing pins, consult your place of purchase. Maintenance û Do not expose the monitor to direct sunlight or heat. û Do not spill liquid on the monitor.
4- 3 Troubleshooting and Useful Hints Need More Help? If your problems remain after checking this manual, please contact your place of purchase or e-mail us at: stevenleung@api.
5- 4 Specifications Specifications Picture Tube Size Type Dot pitch Surface coating 15” (38cm) diagonal Mini-neck 0.28mm dot pitch AG, AS coating Maximum Viewable Size 13.7” (34.8cm) diagonal Power Supply (Universal) Input voltage Power consumption 90~264 V AC, 47~63 Hz 75 W max.
5- 5 Specifications Ambient Temperature Operating Storage +5 ° C ~ +40 ° C / +41 ° F ~ +104 ° F -20 ° C ~ +60 ° C / -4 ° F ~ +140 ° F Humidity Operating Storage 20% ~ 90% 10% ~ 90% Dimensions (W x H x D) 376 mm (W) x 373 mm (H) x 385 mm (D) Weight (net) 12.
Een belangrijk punt na aankoop van elk apparaat Acer 56c (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Acer 56c heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Acer 56c vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Acer 56c leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Acer 56c krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Acer 56c bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Acer 56c kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Acer 56c . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
