Gebruiksaanwijzing /service van het product R9958 van de fabrikant Roberts
Ga naar pagina of 24
MW/FM PLL Synthesised Splash Proof Radio Please read this manual before use ROBER TS Sound for Generations R9958.
Controls ........................................................................... 2-4 Battery operation .................................................................5 Operation via AC adaptor (not supplied) .............................6 Using the fi xing brackets .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Controls (Front) 10 8 1 1. On/Of f/Auto off button 2. Band/time set button 3. T uning up button 4. T uning down button 5. V olume up button 6. V olume down button 7.
Controls 1 1. Battery compartment 12. Battery compartment door 13. FM wire aerial compartment 13 11 12 14 15 14. DC input socket 15. Bracket holders x 2 16.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) a ce d f g a. Battery power status b. V olume level indicator c. Auto Off indicator d. Nap timer indicator e. Memory number and seconds indicator f. Time and frequency indicator g.
Battery operation 1. Release the catch securing the rear battery compartment door of your radio and lift up the battery compartment cover . 2. Insert two LR20 (D size) batteries into the spaces in the compartment. T ake care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Operation via an AC adaptor (not supplied) The AC adaptor for use with the R9958 should provide 3 volts DC output at 300 mA centre pin positive. 1. Insert the adaptor plug into the DC in socket on the left hand side of your radio.
Using the fi xing brackets The radio is supplied with a mounting bracket to allow wall mounting (for example in a bathroom). 1. Use the bracket as a template to mark the hole positions before drill- ing. T ake care to ensure that there are no cables or pipes in the wall near the hole locations.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Swivel hanger/handle Using the multi-purpose handle, you may hang or carry the radio when not used in a bathroom.
Setting the clock 1. The clock will start running when the batteries are installed or when the radio is connected to the mains supply . The display will show " -:--" .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Operating your radio Y our radio is equipped with three tuning methods:- Manual tuning, Auto scan tuning and Memory preset tuning. Auto scan tuning 1. Press the On/Off button to switch on your radio.
Manual tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band but- ton. For the FM waveband fully extend the wire aerial and position for optimum reception. For MW reception there is a built in ferrite aerial.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Storing stations in preset memories There are 5 memory presets for each waveband. 1. Press the On/Off button to switch on your radio. 2. Tune to the required station using one of the methods previously described.
Recalling preset stations 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band but- ton. 3. Momentarily press the required Preset button , the preset number and station frequency will appear in the display .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Adjustable sleep timer Y our radio can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted between 10 and 60 minutes in 10 minute increments.
Adjustable Nap timer The nap timer facility allows you to set the radio to wake you after a pre- determined interval - (up to 2 hours). 1. The nap timer can be set with your radio switched on or off. 2. Press the Nap timer button the current nap time will fl ash.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Recalling preset nap timer settings Y our radio has fi ve nap timer settings stored in memory .
Recalling selected nap timer settings in preset memories 1. Press and release the Nap timer button . 2. Momentarily press the required Preset button , the preset number and nap timer setting will appear in the display 3. Press the Nap timer button again to complete the setting.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) T uning step size In Europe and other parts of the world MW tuning steps are 9kHz, in America the MW tuning step size is 10kHz. On FM tuning steps can be set to either 50 or 100kHz.
Poolside alarm Y our radio has a built in alarm buzzer for emergencies. The alarm is to be used if you require help. 1. Press the Poolside alarm button to activate the buzzer . 2. Press the Alarm button again to stop the buzzer . • The poolside alarm can be used with the radio in the on or of f posi- tion.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Carrying strap Y our radio is supplied with a carrying strap. 1. The strap is fi tted as shown in the diagram below . 2. Ensure that the free end of the strap is completely through the buckle before using the strap to carry the radio.
Display backlight 1. The display backlight will be switched on for approximately 15 seconds when any button is pressed. General Do not allow this radio to be exposed to water (but see splash proof above), steam or sand.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Circuit Features Loudspeaker 76mm 8ohm full range Output Power 500mW Aerial System FM Wire aerial MW Ferrite Rod Specifi cations Power Requirements Mains DC 3 V olts 300mA mains power adaptor centre pin positive (+).
ROBERTS RADIO TECHNICAL SER VICES 97-99 Worton Road Isleworth Middlesex TW7 6EG T echnical Helpline :- 020 8758 0338 (Mon-Fri during offi ce hours) Website: http://www .
Een belangrijk punt na aankoop van elk apparaat Roberts R9958 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Roberts R9958 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Roberts R9958 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Roberts R9958 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Roberts R9958 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Roberts R9958 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Roberts R9958 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Roberts R9958 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
