Gebruiksaanwijzing /service van het product Audio Processor SL-20 van de fabrikant Roland
Ga naar pagina of 28
Thank you, and congratulations on your choice of the BOSS SL-20 Audio Pattern Processor. Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet). These sections provide important information concerning the proper operation of the unit.
2 Contents Main Features .......................... 1 Panel Descriptions .................... 3 Front Panel .......................................... 3 Rear Panel ........................................... 5 Installing Batteries ....................
3 Front Panel Panel Descriptions BANK Knob Turn to switch the slice pattern variation. EFFECT LEVEL Knob Adjusts the volume of the effect sound. The volume of the effect sound increases as the knob is turned to the right. TEMPO Indicator This flashes in sync with the tempo.
4 Panel Descriptions POWER Indicator This indicator shows whether the power is on or off, and also functions as a battery-check indicator. * When the indicator starts to dim or fails to light, the batteries are exhausted. When this occurs, install new batteries.
5 Panel Descriptions Rear Panel INPUT Jacks (INPUT R/MONO, L) These input jacks are used for connecting electric guitars, bass guitars, other instruments, and effects processors. If using monaural input, connect only to the R/MONO jack. “Making the Connections” (p.
6 Installing Batteries Insert the batteries as shown below, being careful to orient the batteries correctly. fig.010 • When turning the unit upside-down, get a bunch of newspapers or magazines, and place them under the four corners or at both ends to prevent damage to the buttons and knobs.
7 Making the Connections • When using an AC adaptor, be sure to use only the specified type (PSA series; optional). Using an adaptor other than the specified type may cause the unit to malfunction, or cause damage to the unit.
8 Making the Connections Mono Input Connection ■ Guitar or Bass fig.020 This works well when used in combination with distortion and modulation effects processors. ■ Keyboard fig.030 Guitar (Bass) AC Adaptor PSA series (optional) Guitar Amp (Bass Amp) AC Adaptor PSA series (optional) MTR Mixer Keyboard SL-20_e.
9 Making the Connections Stereo Input Connection ■ Guitar or Bass fig.060 ■ Keyboard fig.070 Guitar (Bass) AC Adaptor PSA series (optional) Guitar Amp (Bass Amp) Effector AC Adaptor PSA series (optional) MTR Mixer Keyboard SL-20_e.
10 Operating the SL-20 Basic Operation 1. Set the knobs as shown in the figure above. 2. Press the START/STOP pedal to switch the effect on (the START/STOP indicator lights). 3. Turn the EFFECT LEVEL knob to adjust the volume of the effect. 4. Turn the TEMPO knob to adjust the tempo.
11 Operating the SL-20 Panel Operation Setting the Tempo Turn the TEMPO knob to the right to increase the tempo; to slow the tempo down, turn the knob to the left. You can adjust the tempo more precisely by turning the knob slowly. * The tempo setting is stored in memory.
12 Operating the SL-20 Using the TAP Pedal to Cue the Slice Pattern You can jump back to the beginning of the current slice pattern by pressing the TAP pedal while the TAP indicator is off. * The slice pattern is not played when the effect is switched off.
13 Operating the SL-20 Recording/Loop Playback The SL-20 lets you record up to forty seconds of sounds played with slice patterns. After the recording is completed, loop playback of the sound begins. This allows you to perform with backing from the recorded sound.
14 Operating the SL-20 3. Press the START/STOP pedal to stop recording. The PLAY indicator lights up; loop playback of the recorded phrase begins. * Pressing the TAP pedal during loop playback of a phrase causes the SL-20 to return the phrase to the beginning and play it back from that point.
15 Operating the SL-20 Controlling Functions with an Expression Pedal You can connect an expression pedal (such as the Roland EV-5; optional) to the EXP jack and use the pedal to control a variety of functions.
16 Operating the SL-20 Setting the Tempo Response When Slice Patterns Are Switched When switching slice patterns, you can have all the patterns play at a set tempo, without the tempos switching to the ones set in each individual pattern. 1. While holding down the PEDAL MODE button, turn on the power to the SL-20.
17 Operating the SL-20 Setting the Output Mode You can have the output mode stereo effect (p. 3) applied to the direct sound when the effect is switched on. 1. While holding down the PEDAL MODE button, turn on the power to the SL-20. The upper part of the TEMPO indicator lights in green.
18 Operating the SL-20 Synchronizing Performances with External MIDI Devices MIDI (Musical Instrument Digital Interface) is a universal standard that allows for the exchange of performance data and other information among electronic musical instruments and computers.
19 Operating the SL-20 Setting the Retrigger Mode The Retrigger Mode setting determines whether or not the slice pattern will be cued to the beginning when the START/STOP pedal is pressed during reception of MIDI Clock. 1. While holding down the PEDAL MODE button, turn on the power to the SL-20.
20 Returning Settings to Their Factory Defaults You can return the following settings to their original factory defaults. • Slice Pattern tempos • Expression Pedal Function setting (p. 15) • The tempo response when slice patterns are switched (p.
21 Troubleshooting Power doesn’t come on ❍ Is the guitar or keyboard connected correctly to the INPUT R/MONO jack? → Check the connections again (p. 7–p.9). * The power will not turn on without a plug connected to the INPUT R/MONO jack. ❍ Have the batteries run down? → Replace them with new batteries (p.
22 Setting Memo SL-20_e.book 22 ページ ２００８年３月２８日 金曜日 午前８時２８分.
23 Setting Memo SL-20_e.book 23 ページ ２００８年３月２８日 金曜日 午前８時２８分.
24 Main Specifications SL-20: Audio Pattern Processor Nominal Input Level -20 dBu Input Impedance 1 M Ω Nominal Output Level -20 dBu Output Impedance 1 k Ω Recommended Load Impedance 10 k Ω or grea.
25 MEMO SL-20_e.book 25 ページ ２００８年３月２８日 金曜日 午前８時２８分.
26 MEMO SL-20_e.book 26 ページ ２００８年３月２８日 金曜日 午前８時２８分.
GR SK CZ SI LV LT EE PL HU FI SE NO DK NL PT ES IT DE FR UK For EU Countries SL-20_e.book 27 ページ ２００８年３月２８日 金曜日 午前８時２８分.
*G6027131-01* G6027131R0 1RTC This product complies with the requirements of EMC Directive 2004/108/EC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Een belangrijk punt na aankoop van elk apparaat Roland Audio Processor SL-20 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Roland Audio Processor SL-20 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Roland Audio Processor SL-20 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Roland Audio Processor SL-20 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Roland Audio Processor SL-20 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Roland Audio Processor SL-20 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Roland Audio Processor SL-20 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Roland Audio Processor SL-20 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
