Gebruiksaanwijzing /service van het product SGS395X van de fabrikant Roper
Ga naar pagina of 16
Thank you for choosing a Roper appliance. This Use and Care Guide will help you operate and maintain your new, quafity- built Roper range. Keep this Use and Care Guide in a safe place for future reference. Complete and mail the Product Registration Card.
Important Safety Instructions Gas ranges have been thoroughly tested for safe and efficient operation. However, as with any appliance, there are specific mstallatlon and safety precautions which must be followed to ensure safe and satisfactory operation.
16. Grease is flammable and should be handled carefully. Let fat cool before attempting to handle it. DO NOT allow grease to mllect around cooktop or in vents. Wipe spill-overs immediately. 17. DO NOT use water on grease fires. Never pick up a flaming pan.
Using Your Range Oven indicator Left front Electronic clocWTv¶inute Surface burner Clean indicator Setting the electronic clock The electronic clock is a digital clock with a Minute Timer and automatic control cooking cycle. Time-of-day, Minute Timer times and cook times are set by pushing command buttons on either side of the display.
Using the oven Baking 1. Position the rack(s) properly before turning on the oven. To change rack position, pull rack out to stop, raise front edge and lift out.
Using the Cook Timer The automatic Cook Timer is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven such as meats and casseroles. Do not use the automatic cycle for cakes, cookies, etc.
The storage drawer The storage drawer IS for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti- tip bracket(s). Use care when handling the drawer. Removing the storage drawer: I---w Lever 1.
Caring For Your Range Bum, Electrical Shock, Fire And Explosion Hazard l Make sure all controls are OFF and the range is cool before cleaning. m Do not use oven cleaners, bleach 01 rust removers. m Do not use gasoline or other flammable liquids or vapors to clean this or any other appliance.
‘Using the Self-Cleaning cycle The Self-Cleaning cycle uses very high heat to burn away ~011. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before you start Hand clean bame Hand clean door around edge I Do not hand clean seal 1.
Setting the controls To start the Self-Cleaning cycle immediately: 1. Set the Oven Selector to CLEAN. 2. Make sure the clock has the correct time-of-day. (See “Setting the electronic clock” on page 4.) 3. Move the Lock Lever all the way to the right - the Clean position.
PART Exterior surfaces WHAT TO USE Warm, soapy water and a soft cloth. Non-abrasive plastic scouring pad for heavily-soiled areas. HOW TO CLEAN l Wipe off regularly when range is cool. ADO not allow food containing acids (such as vinegar, tomato or lemon juice) to remain on surface.
The oven light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel.
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM Nothing operates. Oven will not operate. CHECK IF . Range is properly connected to gas and electrical supplies.
Lf the Self-Cleaning cycle will not operate. Cooking results a.re not what you expected. The oven temperature seems too low or too high. CHECK IF .YOU pushed in knob(s) before trying to turn. . The Oven Selector is set to CLEAN. . A delay start time is set.
THIS PAGE INTENTIONALLY LEFT BLANK.
LIMITED WARRANTY - Home Appliances LENGTH OF WARRANTY (From date of purchase) FULL ONE YEAR WARRANTY PRODUCTS COVERED All Roper Appliances FULL FIVE YEAR WARRANTY Refrigerators Freezers Air Conditione.
Een belangrijk punt na aankoop van elk apparaat Roper SGS395X (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Roper SGS395X heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Roper SGS395X vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Roper SGS395X leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Roper SGS395X krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Roper SGS395X bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Roper SGS395X kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Roper SGS395X . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
