Gebruiksaanwijzing /service van het product ST2-XM2 van de fabrikant Russound
Ga naar pagina of 36
800.967.2346 2.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL.
T ABLE OF CONTENTS Pr oduct Introduction ..........................................................................................................4-5 Component Guide ST2-XM2 Front Panel ................................................................
4 INTRODUCTION DESCRIPTION Thank you for choosing the Russound ST2-XM2 Dual Smart T uner . Whether you are adding satel- lite radio to an existing system, expanding a CAi Series system or taking advantage of the CAV6.6’ s robust RNET ® communication link, the ST2-XM2 T uner is designed to meet your needs.
5 INTRODUCTION Before using the ST2-XM2 tuner with the CAV6.6 or CAM6.6, you must assign sour ce numbers to T uner 1 and 2 in the ST2 Setup Menu AND complete the CAV6.6 and CAM6.6’ s Source Setup pr ocedure to identi- fy the tuner as a “Peripheral“ device and assign Source Numbers.
6 COMPONENT GUIDE ST2-XM2 FRONT P ANEL XM1 XM2 XM1 64 : The Groove 64 : The Groove XM2 MAIN POWER SWITCH - T urns power on and off POWER ON/OFF LED - Indicates power on or off REMOVABLE COVER LENS - C.
7 RS-232 INTERFACE I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYP AD P ORTS Serial# MADE IN KOREA T UNER 1 IR LR A UDIO O UTPUT IR LR A UDIO O UTPUT T UNER 2 A NTENNA A NTENNA 12VDC 1.
8 TUNE TUNE FAV 1 SEEK ST/ MONO LOC/ DX SEEK TUNE TUNER 1 TUNER 2 4 M E M B A N K 123 56 789 0 PWR MEM TUNE AM/FM FAV 2 OK POWER - Puts the tuner in/out of standby mode TUNER CONTROL - Select TUNER 1 .
9 ST2-XM2 SETUP AND CONNECTIONS BASIC CONNECTIONS Power T o power the tuner , connect the 12VDC external power supply by inserting the power supply jack into the power supply connection on the tuner’ s rear panel. Audio Output Connect one end of a dual RCA audio cable to the T uner 1 Audio Output connection.
10 ST2 T uner CA V6.6 UNO-S2 keypads RCA Cable 64:The Groove 45:XM Cafe 1.25A Source Connections with CA V6.6 Contr oller/Amplifier (RNET System) The diagram depicts a typical setup using the ST2-XM2 T uner with a CAV6.6 amplifier . Each tuner in the ST2 unit must be connected as a separate source for audio inputs.
ST2-XM2 SETUP AND CONNECTIONS CAi SERIES AND ST2-KP CONNECTIONS RS-232 INTERFACE 12VDC 1.25A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS Serial# MADE IN KOREA T UNER 1 IR LR A UDIO O UTPUT IR LR A UDIO O UTPUT T UNER 2 A NTENNA 1 R L 2 1 R L 2 34 CA6.
12 ST2-XM2 SETUP AND CONNECTIONS ANTENNA CONNECTIONS A NTENNA ST2-XM2 T uner 12VDC 1.25A XM Antenna Connect the included XM antenna for XM recep- tion to the back panel of the XM module. The antenna comes with 20 feet of cable. If this length is not sufficient, there ar e aftermarket antenna kits available for custom lengths.
13 XM Radio Activation XM Radio is over 100 channels of radio broadcasts with the signal deliver ed by satellite and (depend- ing on location) transferred by terr estrial antennas. The radio is a subscription-based service with a monthly provider fee and an activation char ge.
14 ST2-XM2 OPERA TION XM RADIO MODES XM Radio Modes There ar e four user “modes” for selecting music and viewing music information on the XM T uner: Preset (default or normal) Category Search Now Playing Display Prefer ences . These modes are accessed thr ough cer tain button and key presses fr om the tuner panel, remote controls and keypads.
15 ST2-XM2 OPERA TION XM RADIO MODES ST2-XM ST2-RC ST2-KP UNO-S2 UNO-S1 UNO-LRC1 Preset Mode Next Preset MEM Previous Pr eset MEM Next Bank Hold Hold Hold Previous Bank Hold Hold Hold Channel Up TUNE Hold Channel Down TUNE Hold Preset (default) Mode This is the normal operating mode of the XM tuner .
16 Category Search Mode ( 1 1 . . C C A A T T S S E E A A R R C C H H ) XM Radio is or ganized by Channel Category (e.g., Rock, Country, News ). W ithin each category is a series of channels (e.g., T op T racks, Bluegrass Junction, XM Classics). Channel selection in this mode is refined to scr olling only those channels in the selected category .
17 ST2-XM ST2-RC ST2-KP UNO-S2 UNO-S1 UNO-LRC1 Display Prefer ence Mode OK Next Display Prefer ence TUNE MEM MEM Previous Display Prefer ence TUNE MEM MEM ST2-XM2 OPERA TION XM RADIO MODES Now Playing Mode ( 2 2 . . N N O O W W P P L L A A Y Y N N G G ) This mode displays information about the current XM selection.
18 Fr ont Panel Operation T urning the unit on T o turn the unit on, push the On/Off button up on the front panel. Pushing the On/Off button down turns the tuner off. Selecting the desired tuner From the fr ont panel, use to toggle between the XM tuners.
19 ST2-XM2 OPERA TION ST2-RC REMOTE CONTROL ST2-RC Remote Contr ol Operation The ST2-RC remote contr ol is the only means of remote operation of the ST2-XM2 in a non--RNET sys- tem. The ST2-XM2 front panel displays information for the tuner that is receiving commands fr om the ST2- RC.
20 ST2-XM2 OPERA TION ST2-KP KEYP AD CONTROLS ST2-KP Keypad Operation T urning the keypad on/of f T o activate the ST2-KP , press . Press to power down the keypad display . The keypad remains powered until the ST2-XM2 T uner is turned off. Selecting the desired tuner T o select a different tuner , press and hold .
21 ST2-XM2 OPERA TION UNO-S2 KEYP AD CONTROLS WITH CAV6.6/CAM6.6 CA V6.6-UNO-S2 Keypad Operation NOTE: T o control the ST2 T uner through the UNO-S2 keypad, the tuner must be configured as a source using the CA V6.6/CAM6.6 program- ming steps. T urning the unit on The tuner is power managed by the CAV6.
22 ST2-XM2 OPERA TION UNO-S2 KEYP AD CONTROLS WITH CAV6.6/CAM6.6 TUNER SELECTION - Select source number assigned to TUNER 1 (XM1) or TUNER 2 (XM2) TUNE UP/DOWN - Used for manual channel selection SELE.
23 UNO-LRC1 Remote Contr ol Operation T urning the unit on The tuner is power managed by the CAV6.6 or other RNET -enabled controller . If the tuner is in standby mode, any button press of the UNO- LRC1 will bring the tuner out of standby mode when used with the UNO keypad.
24 ST2-XM2 OPERA TION UNO-LRC1 REMOTE CONTROL WITH CA V6.6/CAM6.6 POWER - Power managed by CAV6.6/CAM6.6 NUMERIC INPUT - Number buttons for direct input of frequency , channel, preset, bank ENTER - XM.
ST2-XM2 T uner Setup Menus Note: The Setup Menu procedur es must be per formed from the ST2-XM2 T uner front panel. The ST2-XM2 T uner Setup Menus provide setup and naming pr ocedures for the ST2-XM2 main chas- sis and the XM tuner modules.
26 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Update Firmware (Chassis) The Update Firmware pr ocedure allows the ST2 tuner’ s OS firmware to be updated. The pr oce- dure is performed using a DB9 serial cable with one end connected to the RS-232 port on the back of the tuner and the other connected to a PC or laptop.
27 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU TNR SEL Press and Hold TNR SEL button ST2 Chassis Setup Proc edures TNR SEL TNR SEL This Procedure returns the ST2 T uner to its F actor y settings SO.
T uner Setup Menu for XM Memory Name A memory preset must be created and saved before it can be named (see page 18). Once it is saved, the preset’ s T uner #, Bank # and Memory # must be entered in the following pr ocedure. 1. Enter the Setup Menu by pressing and holding the TNR SEL button.
29 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU 2. TUNER SETUP appears. Press BAND again. 3. MEMORY NAME appears on the tuner . 4. Press BAND. 5. Bank # appears. 6. Press the T une Up/Down buttons to select the Bank #. 7. Press BAND to advance. Memory # appears.
30 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Bank Name A custom name can be assigned to each of the six banks of T uner 1 (XM). 1. Enter the Setup Menu by pressing and holding the TNR SEL button. 2. TUNER SETUP appears. Press BAND. 3. MEMORY NAME appears.
31 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Press TNR SEL button to select XM T uner XM Setup Menu C ontroller , Diagnostics, F actor y Initialization and Sy stem Info Proc edures TNR SEL TNR SE.
32 NOTE: The CAV6.6 firmwar e must be version 2.00.01 or higher , and UNO-S2 firmwar e must be version 3.00.01 or higher to control the ST2-XM2 T uner . Use the System Info Menu of the CAV6.6 to check the firmwar e version. If the firmware is not the pr oper revision as noted her e, visit the Document Center at www .
NOTE: The CAM6.6 firmwar e must be version 1.00.11 or higher and UNO-S1 firmwar e must be version 1.00.21 or higher to control the ST2-XM2 T uner . Use the System Info Menu of the CAM6.6 to check the firmwar e version. If the firmwar e is not the proper r evision as noted here, visit the Document Center at www .
34 ST2-XM2 Smart T uner Dimensions: 17"W x 8"D x 1.8"H (43 x 20.3 x 4.4 cm) Weight: 7 lbs. (3.2kg) Power Supply: 12VDC 1.25A XM Band: 2332.
35 WARRANTY & REP AIR The Russound ST2-XM2 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will replace any defective parts and correct any defect in workmanship without char ge for either par ts or labor .
Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www .russound.com E. & O.E. Copyright © 2005 Russound ® All rights reserved.
Een belangrijk punt na aankoop van elk apparaat Russound ST2-XM2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Russound ST2-XM2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Russound ST2-XM2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Russound ST2-XM2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Russound ST2-XM2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Russound ST2-XM2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Russound ST2-XM2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Russound ST2-XM2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
