Gebruiksaanwijzing /service van het product DVE-560 van de fabrikant Sampo
Ga naar pagina of 31
1 D D V V D D P P l l a a y y e e r r U U s s e e r r M M a a n n u u a a l l.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION :TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTION READ THE SAFETY AND OPERATING INSTRUCTION before operating your DVD player FOLLOW INSTRUCTIONS AND HEED ALL WARNINGS on your DVD player in this manual . 1. Save these instructions for later use 2. Unplug this product from the wa ll outlet before cleaning.
2 FEATURES p Compatible with Video CD, CD, Super VCD, and CVD as well as DVD - video This DVD player can playback not only the Video CD, CD, and DVD - video but also the super VCD and CVD, which are popular in China. In addition, it also can playback the MP3 audio recorded in CD - ROM.
3 INDEX FEATURES .................................................................................. 1 PACKAGE CONTENTS ............................................................ 2 INDEX ...............................................................
4 Precautions Please read the followings carefully so that this DVD player can be used correctly and safely. p Power supply Make sure that the correct power outlet is used (AC100~240V) p Power cord 1 Do not put any heavy objects on top of the power cord to avoid fires or current leaks caused by the cord damage.
5 p Disc usage 1 Please hold all discs by their edges or the center opening as shown below. Do not touch the shiny signal surface of the discs. 1 Do not stick labels or tapes on the discs, and do not scratch or damage the discs. 1 The unit spins the disc at high speed during playback.
6 BACKGROUND INFORMATION This DVD player can play the following types of discs Disc type/Logo Dimension/s ide/layer Max. playback time(storage capacity) DVD 12 cm/single sided/single layer 12 cm/single sided/double layer 12 cm/double sided/single layer 12 cm/double sided/double layer MPEG2 TYPE 133 min.
7 Front p anel/Display window p Front panel 1. Headphone volume level control Adjust the volume level of the headphone 2. Headphone jack Connect the headphone 3. Display window Display the operation information 4. Disc tray 5. OPEN/CLOSE button Open/close th e disc tray 6.
8 p Display window 1. CD/VCD indicator 2. PBC indicator for VCD disc 3. DVD indicator 4. Operation status indicator - playback 5. Operation status indicator – pause or stop 6. Title number indicator 7. Chapter/track number indicator 8. Elapsed playback time / remaining playback time indicator 9.
9 Remote Control Unit In order to use the remote control unit to operate the DVD player, please insert two R6 batteries (size AA) into the remote control unit. Make sure that the + and – ends of the batteries are matched to the +/ - marks inside the battery compartment.
10 POWER button Turn on/off the DVD player unit 2. SETUP button Customize the settings. Refer to p. 12 3. DISPLAY button Display the operation status 4. OPEN/CLOSE button Open or close disc tray 5. SE ARCH button Title search, chapter search, and time search.
11 REAR PANEL AND CONNECTIONS p Rear panel There are the following AV output terminals in the rear panel 1 Video output terminals including ü 0ne Y/Cb/Cr Component - video terminal Œ ü One S - video terminal • ü One composite video terminal.
12 p Video Connectio n 1 Y/Cb/Cr component video output terminal can be connected to the TV set equipped with a component video input terminal for the best possible picture quality Π. i Whenever the component video output terminal is equipped for display, please set the VIDEO OUT setting to Y/CR/CB in the initial setting (Refer to p.
13 INITIAL SETTING Press the SETUP button on the remote control into the initial setting, while the OSD for initial setting will be displayed as follows, Four items are available in initial setting, which are 1. General Setup : general function setting for this unit 2.
14 OSD Language There are three OSD languages, which can be selected in this DVD player. They are ENGLISH, FRANCH, and GERMAN Audio Output Two audio output modes can be set 1 Analog : Analog audio is output from Dolby AC3 5.1audio terminal and stereo audio terminal.
15 Screen Saver When this DVD player is idle such as stop, stay at setup menu, or no disc inserted, t he screen saver can be triggered to prolong the TV life - time. p Speaker Setup This setting is only available for the models with analog Dolby AC3 5.
16 Center De lay This unit supports the center time delay range of 0 to 5 ms in 1ms steps. Rear Delay This unit supports the surround time delay range of 0 to 15 ms in 3ms steps. p Digital Audio Out This setting concerns the audio output form at from the unit ’s optical/coaxial digital audio output terminal.
17 Audio This unit supports five audio selections, as shown below , for your preferred default audio. Subtitle This unit supports five subtitle selections, as shown below, for your preferred default subtitle. When “OFF” is selected, there will be no subtitle to display default.
18 Defaults When you select “RESET ’ , all the initial setting will be reset to the default setting. -- PREFERENCESPAGE – AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULTS RESET 3 MAIN PAGE LO.
19 ON - SCREEN DISPLAY (OSD) p DVD OSD modes Whenever the DISPLAY button is pressed, the OSD mode changes among the following modes: Mode 1 Only the status of pressed button and some special playback messages are displayed. The OSD message lasts only three seconds.
20 BASIC OPERATION Preparation: 1 If you use a television set, turn on its power and set the TV/Video switch to “Video”. 1 If a sound system is used, the amplifier must be turned on first and make sure that its outputs are set properly. p Start playback ¬ Press the POWER button to turn on the DVD player.
21 p Slow - motion forward/r everse playback Press the SLOW button can trigger the slow - motion forward/reverse playback. 1 DVD Whenever the SLOW button is pressed, the slow - motion playback is triggered and the speed changes in circles of fwd 1/2 Õ fwd 1/4 Õ fwd 1/8 Õ rev 1/2 Õ rev 1/4 Õ rev 1/8 Õ normal Õ fwd 1/2.
22 Advanced Operation p Repeated playback Whenever the 1/ALL button is pressed, the repeated playback is triggered and the message OSD is changed in circles of “ 1”, “ ALL”, and “ OFF”. 1 “ 1” ü Trigger the repeated playback of a chapter for a DVD disc.
23 Start/Cancel the program playback 1 Press the PLAY button to start the program playback in order that you program. 1 Press the STOP button to cancel the program playback and the program order is reset.
24 p T itle Menu (DVD only) Some of DVD discs has a title menu recorded on it used to select title for playback. The operation details for the title menu depends on the disc. 1 Press the TITLE button during playback to title menu. Pressing the TITLE button agai n resumes the playback of the scene when the TITLE button was first pressed.
25 p Changing subtitle during playback During playback of a DVD disc with more than two subtitle languages, you can change the subtitle or disable the subtitle by press the SUBTITLE button. 1 Press the SUBTITLE button and the subtitle OSD message will appear to show the current subtitle number.
26 p VCD ’ s playback control (PBC) This function is only available for the playback of a Video - CD Ver. 2.0 or more. The PBC op eration may be different by disc.
27 TROUBLESHOOTING Before requesting service for this unit, please check the following chart for a possible cause of the problem you are experiencing. Some sim ple checks or minor adjustment on your AV system may eliminate the problem and resume proper operation.
28 SPECIFICATION Power requirement AC 100~240 V, 50/60 Hz Power consumption 26 W ( approx. 6W at standby mode) Weight 4.2Kg Dimensions (W x D x H) 430x310x86 (mm) Operating temperature range +5 to 40 .
29 Region Management Information This DVD player is designed and manufactured to respond to the Region Management Information reco rded on a DVD disc. If the region number described on the DVD disc do.
Een belangrijk punt na aankoop van elk apparaat Sampo DVE-560 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sampo DVE-560 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sampo DVE-560 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sampo DVE-560 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sampo DVE-560 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sampo DVE-560 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sampo DVE-560 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sampo DVE-560 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
