Gebruiksaanwijzing /service van het product MXP124FX van de fabrikant Samson
Ga naar pagina of 24
MXP124/MXP124FX STEREO MIXERS OWNER’S MANUAL.
Copyright 2014 v1.3 Samson T echnologies Corp. 45 Gilpin Avenue Hauppauge, New Y ork 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www .
Important Safety Information W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) AS THERE ARE NO USER-SERVICEABLE P AR TS INSIDE.
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manu- facturer’ s instructions.
5 T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Adding Digital Effects (MXP124FX Only) . . . . . . . . . . . . . . 8 USB Connectivity (MXP124FX Only) .
6 Congratulations on your purchase of the Samson MixPad MXP124 or MXP124FX mixer! The MXP124 and MXP124FX are 12-channel mixers, with four mic/line channels with low-noise, microphone preamps, as well as four stacked-stereo line input channels.
7 Basic Operation The following section explains the basic setup and operation of the MixPad MXP124 and MXP124FX. 1. Before connecting any microphones or instruments, make sure that the power of all your systems components including the MixPad mixer is turned off.
8 Adding Digital Effects (MXP124FX Only) The MXP124FX features built-in, high quality , 24-bit Multi Effect Processors, offering 100 studio grade effects presets. The DIGIT AL EFFECTS section features clean Delays, lush Reverbs and multi-effects like Delay + Reverb.
9 The MXP124FX has a built-in stereo USB audio interface allowing you to record and playback from a computer using virtually any digital recording software. Setting up your mixer with a computer is a simple procedure that takes just a few minutes. The following section describes how to connect and setup the MXP124FX with a computer .
10 Features The Samson MixPad mixers are comprehensive, all-in-one solution for live sound, recording, fixed installation and post production applications.
11 T op Panel Controls Mono Input Channel Section The following section details four mono input channels. 1. MIC Inputs - Use these balanced XLR inputs to connect low Impedance microphones and low level signals from direct boxes. The MIC inputs feature +48V phantom power , allowing you to use condenser microphones.
12 T op Panel Controls 7. FX Auxiliary Control (MXP124FX) - The channel’ s FX knob controls the amount of signal that is sent to the effects bus. The signal of the FX bus in the MXP124FX is routed to the Digital Effects section for on-board signal processing.
13 Stereo Input Channel Section The following section details four stacked stereo input channels. 11. Stereo ¼ ” Input Jacks - Use the ¼” jacks for connecting stereo line level sources. For stereo inputs use the LINE L to connect the left channel and the LINE R to connect the right channel.
14 T op Panel Controls Digital Effects Section (MXP124FX only) The following section describes the features control of the on- board 24-bit digital Multi-effects section. 16. PROGRAM Effects Display - The mixer’ s multi-effects processors feature a dual digit, seven-segment numerical display for showing the effects PROGRAM number from 00 - 99.
15 Master Section This following section details the master section of the mixer . 21. T APE IN (RCA jacks) - Stereo line level input, on RCA connectors, for connecting the output of devices such as MP3, CD, computer sound-card, or any other line level device.
16 T op Panel Controls 29. PHANTOM Power Switch and Indicator - The mixer features an on-board, 48-V olt Phantom power supply to operate condenser microphones. When the switch is engaged, the LED will illuminate indicating that phantom power is now available at the microphone preamps.
17 This following section details the rear panel connections. A. AC ADAPTER INLET - Connect the supplied external AC power supply here. B. POWER - Switches on the MXP124 and MXP124FX main power . C. USB Port (MXP124FX Only) - Connect the MixPad mixer to a computer using standard USB cable here.
18 There are several ways to interface the MXP mixer to support a variety of appli- cations. Follow the cable diagrams below for connecting your mixer .
19 Frequency Response (T rim @ Min, unity gain ± 3 dB) Mic to Main 20Hz~30KHz Line to Main 20Hz~30KHz Aux Return to Main 20Hz~30KHz Line to Aux Send 20Hz~30KHz T .H.D. (T rim @ Min, +4dBu output, unity gain, 1 kHz w/30 kHz LPF) Mic/Line to Main (Mono Ch) <0.
Phantom Power 48V±3V Power Requirement AC18V 1000mA Power Consumption <18W Dimensions (W x D x H) 12.9” x 11.7” x 3” 327 mm x 298 mm x 75 mm W eight 5.
21 Number Effect Parameter 00-09 Echo Delay T ime: 145~205ms 10-19 Echo + V erb Delay T ime: 208~650ms Decay T ime: 1.7~2.1s 20-29 T remelo Rate: 0.6~5Hz 30-39 Plate Decay T ime: 0.9~3.6s 40-49 Chorus Rate: 0.92~1.72Hz 50-59 V ocal Reverb Decay T ime: 0.
22 Microphone Stand Mounting Accessory (Sold Separately) The MixPad MXP124 and MXP124FX can be mounted to a microphone stand using the optional Mic Stand Mount accessory kit. The following steps describe how to mount the MixPad mixer to a microphone stand.
23 Block Diagram MONO INPUT CHANNELS (1-2) 2 1 3 MIC IN PEAK LEFT -BUS RIGHT -BUS AUX-BUS RIGHT -BUS LEFT -BUS AUX-BUS STEREO INPUT CHANNELS ( 5-12 ) AUX SEND MAIN OUT LEFT -BUS MXP124FX Only RIGHT -B.
Samson T echnologies Corp. 45 Gilpin Avenue Hauppauge, New Y ork 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www .samsontech.com.
Een belangrijk punt na aankoop van elk apparaat Samson MXP124FX (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samson MXP124FX heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samson MXP124FX vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samson MXP124FX leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samson MXP124FX krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samson MXP124FX bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samson MXP124FX kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samson MXP124FX . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
