Gebruiksaanwijzing /service van het product 400TSN2 van de fabrikant Samsung
Ga naar pagina of 128
SyncMaster 400TSn-2/460TSn-2 LCD Monitor User Manual.
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.
Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet.
Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the in- ternal temperature.
When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. • Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it softly with a dry cloth.
If thunder or lightening is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.
If you continually move closer to the product screen, your eye- sight may be failing. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces the weariness of your eyes. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations.
The batteries (and rechargeable batteries) are not ordinary re- fuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.
Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Note This stand is not for the Floor Standing Type.
Others Remote Control Batteries (AAA X 2) (Not available in all loca- tions) HDD Cover Sold separately DVI Cable Wall Mount KIT LAN Cable Semi Stand KIT TV tuner box Note • You can purchase and connect a separate network box or TV tuner box. For information on how to use these, refer to their respective user manuals.
Moves from one menu item to another vertically or adjusts selected menu values. Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu item to another horizontally or adjusts selected menu values. When OSD is not on the screen, push the button to adjust volume.
POWER S/W ON [ │ ] / OFF [O] Switches the LCD Display On/Off. POWER IN The power cord plugs into the LCD Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) P.
Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC) DC OUT [5V/1.5A] Connect this to the POWER connector of a TV tuner box or network box. AV IN [VIDEO] (VIDEO Connection Ter- minal) Connect the [ VIDEO ] terminal of your mon- itor to the video output terminal of the exter- nal device using a VIDEO cable.
Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustra- tion depending on the manufacturer.
POWER OFF Number Buttons DEL button + VOL - MUTE TV/DTV MENU INFO COLOR BUTTONS TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS MagicInfo P.MODE DUAL/MTS PIP SWAP 1. POWER Turns the product On.
5. + VOL - Adjusts the audio volume. 6. MUTE Pauses (mutes) the audio output temporarily. This is dis- played on the lower left corner of the screen. The audio resumes if MUTE or - VOL + is pressed in the Mute mode. 7. TV/DTV Selects the TV and DTV mode directly.
23. RETURN Returns to the previous menu. 24. Up-Down Left-Right but- tons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 25. EXIT Exits from the menu screen. 26. SRS Selects SRS TruSurround XT mode. 27.MagicInfo MagicInfo Quick Launch Button.
Mechanical Layout (400TSn-2) Mechanical Layout Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order.
Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer.
1. Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. There are two hinges(left and right).
To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger.
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket.
Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Mechanical Layout (460TSn-2) Mechanical Layout Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards.
Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer.
There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct.
To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger.
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket.
Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Introduction.
Connections Connecting a Computer Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the AC power in advance.
Connect the audio cable for your LCD Display to the audio port on the back of your computer. Note • Turn on both your computer and the LCD Display. • The DVI cable is optional. • Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .
Connecting Using a DVI to HDMI Cable Note • Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable.
Note Connect the LAN cable. Connecting a USB device Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the AC power in advance.
Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD- ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the oper- ating system you have.
Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft ® Windows Vista™‚ Operating System 1.
If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage.
9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.
1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
7. Click the "Browse" button then choose A:(D:Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.
10. Monitor driver installation is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window.
4. Select the "Monitor" tab. 5. Click the "Change" button in the "Monitor Type" area. 6. Choose "Specify the location of the driver". 7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.
10. You have finished setting up your monitor. Execute X-Window after setting other re- quested hardware. IRTOUCH IRTouch Screen Control Panel Double click the mark on the tabletop (as the following i.
2. Select the touchscreen you want in the list and Click [Calibrate]. After calibration, the item "Calibrated" will show "Yes". Calibration compromising of steps: select a touchscreen in the information list, then click "calibrate" button when the calibration window shows up.
Modes Setting 1. Click on touch Mouse single click event happens immediately at the point when the finger contact the touchscreen, not for dragging objects. In this mode the touchscreen responds fastest, it's usually used for big button applications.
the pop-up time is either fast or slow. Notice: the higher the value, the slower the pop- up time. "Delay" unit is "millisecond". The "area" is used for adjusting the jitter-range of the touch surface within limit of error (unit: pixel).
2. Click [Change Port] to set and change setting of the selected Serial Port. Attachment The general setting of touchscreen Select "Mouse Emulation" mode, then choose "Enable Touch" Send Right ClickEnable Dou- bleClick.
Installment 1. Send Right Click : To enable right-click function (default). Click and press on any area on the screen for two second, the right-click menu will pop-up. Right-click is only available in Mouse Emulation mode. The “Delay” value is 1000(1second); The “Area” value is set to 32px at optimum.
Specification 1. Each value should be gradually set in "Delay Touch Settings" after fulfillment of "Enable Delay Touch". "Delay" is set to 40 and "Area" to 16. 2. Enter count : It means how many times you click to approach the setting value within 3 seconds.
I ntr od ucti on A Multip le Displ ay Con trol (MDC ) is an appli cat io n a llowin g vario us di splay s to be easily and s imul taneou sly operated on a PC. RS-232C, a standard of ser ial communication, is used for the communication between a PC and a displa y.
Ma i n Ico n s Select Button Re mo co n Info Gr id Sa fe ty L o ck Dis p lay Sel ec tio n Por t S el ect io n Co n tr o l T o o ls 1. Use the main ic ons to swit ch into e ac h scre en. 2. Allows you t o ena ble or d is able the rem ote co nt rol sign al re cei ving f un ctio n of the dis pla y unit .
1. The Mult iple Display C ontro l is origin ally s et to COM1. 2. If any port othe r tha n CO M1 is use d, C OM1 thro ugh COM 4 ca n be se l ecte d in the Por t Se lec tion Me nu. 3. If the exac t port name th at is conn ect ed to the LCD Disp lay using a seria l ca ble is not sele cted, commu nic at ion will be unav ail able .
Info Grid shows some basic i nformation nece ssary to P ower Control. 1) (Power S tatus) 2) Input 3) Im age Siz e 4) On Timer 5) Off Tim er 2. Use the Sele ct All butto n or C heck Bo x to c ho os e a display to con tr o l. Power Cont rol all ows cont rollin g some of the fun ct ions of th e select ed di s play .
- T urns the p ow er of th e s el e cted dis p la y On/Off. 2) Volu me - Control s the volum e leve l of the se lec te d displa y. It receiv es th e volume value of the sel ect ed displa y from t he se ts and dis pla ys it in th e slide r.
Info Grid shows some basic i nformation necessary t o Input Source Con trol. 1) PC - Cha nges t he I np ut S our ce of the se lect ed di spl a y to P C. 2) BNC - Cha nges t he I np ut S our ce of the se lect ed di spl a y to B NC. 3) DVI - Cha nges t he I np ut S our ce of the se lect ed di spl a y to DV I .
Info Grid shows some basic i nformation necessary t o Image Size C ontrol. 1) ( P ower Status) - Show s the po wer st at us o f the cur ren t dis p lay . 2) I m ag e Size - Sh ows the cur r ent I mag e S iz e o f t he di splay i n us e. 3) Input - Show s t he cur r en t In pu t So u rce of t he dis p la y in u s e.
Info Grid shows some basic i nformation necessary t o Image Size C ontrol. 1) C lic k the Video So u rce tab to ad just I mage Size for TV, A V , S-V ideo , C om po nent , DVI (H DCP ), H DMI , DT V. Click Sele ct All or u se Chec k B ox to sel ect a displ ay to cont rol.
Info Grid shows some basic i nformation necessary t o Time Control. 1) Curre nt T ime - Set the cu rren t t ime fo r t he se lec ted dis pla y (PC Tim e).
Info Grid shows som e basic information necessary t o PIP Size Con trol. 1) PIP S ize - Show s the curren t PIP Size of the di sp lay in use . 2) OFF - Turns off the PIP of the se lected displ ay. 3) Large - Tu rns on the PIP of th e sel ec t ed d ispla y an d ch anges the s iz e to L arg e.
Info Grid shows some basic i nformation necessary t o PIP Source Con trol. 1) PIP Source - PIP Sourc e ca n be cont rolle d with tu rnin g o n th e LCD Display powe r. 2) PC - Changes the sou rce of t he PIP of the select ed display to PC. 3) BNC - Changes the sou rce of t he PIP of the select ed display to BNC.
Info Grid shows som e basic information necessary t o Settings C ontrol. Whe n ea ch fu nct io n i s sel ect ed , th e s e t va lue of t he s e lec ted fu nc ti o n i s dis p l a ye d i n th e s l i d e.W hen s el e ct ed, eac h func tio n fe tc he s the val ue f o r t he se t an d d is pl ay s it o n th e s l id e bar .
1. Click Set tin gs of the m ain icons a nd the Se tt ing s Con trol sc ree n ap pea rs. Info Grid shows some basic i nformation nece ssary to Sett ings Contr ol. When e ach function is se lected, the set v alue of the selec ted f unc tion is dis pla yed in t he slid e.
Setti n g s Audio 1. Click Set tin gs of the m ain icons a nd the Se tt ing s Con trol sc ree n ap pea rs. Info Grid shows some basic i nformation nece ssary to Sett ings Contr ol. When e ach function is se lected, the set v alue of the selec ted f unc tion is dis pla yed in t he slid e.
Info Grid shows some basic i nformation necessary t o Settings C ontrol. 1) Image Lock - Available only f or PC, BNC. 2) Coarse - Adjusts Coarse of the sele cted displ ay. 3) Fine - Adj ust s F i ne o f t he se lec te d d is play. 4) Position - Adjusts Position of the se lected d isplay.
An "Info Grid" sh owing sever al basic da ta items appe ars. 1) Ma int ena nce - A llo w s the Main tenan ce Con trol fu nctio n fo r al l in p ut sou rces . 2) Auto Lamp C o nt rol - Automa tic ally adju sts th e ba ckligh t of the s ele cte d dis p lay at a sp eci fied time.
1) Scroll - This function i s used t o remove the a fteri mages that oc cur when a st ill scre en is di splayed on the selected displa y for a l o n g t i m e . 2) Pixel Shif t - This allows t he screen to be move d finely at the specifi ed time interval.
1) Video Wall - A Video Wall is a set of video screen s that ar e connected to gether, so that each screen show s a part of the whole picture or so tha t the sam e pic tu re is re peate d on ea ch sc ree n. 2) Video Wall (Screen divider) - The scree n c an be div ided int o.
- Check the d isplays to see if any of t he other displays c onnected h ave the same I D. If m ore than one displays have the same ID, those displa ys ar e not prope rly det ec ted by t he pr ogra m due to dat a c onflic t. - Check if the D isplay Set ID is a numb er bet ween 0 and 25 .
Adjusting the LCD Display Input Available Modes • PC / DVI • AV • HDMI • MagicInfo Note The TV menu is available when a TV tuner box is installed. Source List MENU → ENTER → [ Input ] → ENTER → [ Source List ] → , → ENTER Use to select PC , DVI or other external input sources connected to the LCD Display.
→ , → ENTER Name the input device connected to the input jacks to make your input source selection easier. 1. PC 2. DVI 3. AV 4. HDMI Picture [ PC / DVI / MagicInfo Mode] Available Modes • PC / DVI • AV • HDMI • MagicInfo Note The TV menu is available when a TV tuner box is installed.
(Not available in Dynamic Contrast mode of On .) 1. Entertain High brightness For watching motion pictures such as a DVD or VCR. 2. Internet Medium brightness For working with a mixture of images such as texts and graphics. 3. Text Normal brightness For documents or works involving heavy text.
Sharpness MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → → → ENTER → [ Sharpness ] → , → ENTER Adjusts the Sharpness. Color Tone MENU → → ENTER → [ Picture ] → → → ENTER → [ Color Tone ] → , → ENTER The color tones can be changed.
Red MENU → → ENTER → [ Picture ] → → → → ENTER → [ Color Control ] → ENTER → [ Red ] → , → ENTER Green MENU → → ENTER → [ Picture ] → → → → ENTER → [ Color Cont.
Coarse MENU → → ENTER → [ Picture ] → → → → → ENTER → [ Image Lock ] → ENTER → [ Coarse ] → , → ENTER Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.
(Not available in Dynamic Contrast mode of On .) Note The direct button on the remote control is the 'AUTO' button. Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable.
3. B-Gain MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Signal Balance ] → ENTER → → [ Signal Control ] → → → ENTER → [ B-Gain ] → , → ENTER 4.
1. 16:9 2. 4:3 Dynamic Contrast MENU → → ENTER → [ Picture ] → → → → → → → → → ENTER → [ Dynamic Contrast ] → , → ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.
The LCD Display has four automatic picture settings (" Dynamic ", " Standard ", " Movie " and " Custom ") that are preset at the factory. Dynamic , Standard , Movie , or Custom can be activated. (Not available in Dynamic Contrast mode of On .
Color MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → → → → ENTER → [ Color ] → , → ENTER Adjusts the picture Color. Tint MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → → → → → ENTER → [ Tint ] → , → ENTER Adds a natural tone to the display.
Color Temp. MENU → → ENTER → [ Picture ] → → → → ENTER → [ Color Temp. ] → , → ENTER Color temp is a measure of the 'warmth' of the image colors. (Not available in Dynamic Contrast mode of On .) Note This function is only enabled if the Color Tone is set to Off .
→ , → ENTER Turns the Digital Noise Reduction feature Off / On . The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On Film Mode MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Film Mode ] → , → ENTER The Film Mode feature offers you a theater-quality viewing experience.
Sound Available Modes • PC / DVI • AV • HDMI • MagicInfo Note The TV menu is available when a TV tuner box is installed. Mode MENU → → → ENTER → [ Sound ] → ENTER → [ Mode ] → , → ENTER The LCD Display has a built-in high fidelity stereo amplifier.
Note • You can hear the sound even when sound value is set to 0. • If you adjust sound using Custom function, Mode will turn to Custom mode. Bass MENU → → → ENTER → [ Sound ] → → ENTER → [ Custom ] → ENTER → [ Bass ] → , → ENTER Emphasizes low frequency audio.
SRS TS XT MENU → → → ENTER → [ Sound ] →→→→ ENTER → [ SRS TS XT ] → , → ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5.
You can choose one of 13 languages. Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Time Selects from one of 4 time settings, Clock Set , Sleep Timer , On Timer , and Off Timer .
5. 120 6. 150 7. 180 On Timer MENU → → → → ENTER → [ Setup ] → → ENTER → [ Time ] → → → ENTER → [ On Timer ] → , / , → ENTER Turns the LCD Display on automatically at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically.
Change the transparency of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock PIN MENU → → → → ENTER → [ Setup ] → → → → ENTER → [ Safety Lock PIN ] → [0∼9, 0∼9, 0∼9, 0∼9] → [0∼9, 0∼9, 0∼9, 0∼9] → [0∼9, 0∼9, 0∼9, 0∼9] The password can be changed.
→ , → ENTER When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI black level .
→ , → ENTER The Format can be selected to see a divided screen. 1. Full Provides a full screen without any margins. 2. Natural Displays a natural image with the original aspect ratio intact.
The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. • Select a mode in Screen Divider. • Select a display in Display Selection. • The selection will be set up by pressing a number in the selected mode.
Horizontal Dot MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] → ENTER → [ Pixel Shift ] → → ENTER → [ Horizontal Dot ] → , → ENTER Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4.
You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish.
Time MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] → → ENTER → [ Timer ] → → → → ENTER → [ Time ] → , → ENTER Within the set period of time specify a time for execution.
Eraser MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] → → → → → ENTER → [ Eraser ] This function prevents after-images on the screen by moving a rectangular pattern.
→ , → ENTER Adjusts the Power On time for the screen. Caution: Set the Power On time to be longer to avoid overvoltage. Side Gray MENU → → → → ENTER → [ Setup ] → → → → → → → → → → → ENTER → [ Side Gray ] → , → ENTER Select the brightness of the grey for the screen background.
Note Available in PC mode only Note The Reset function is not available when Video Wall is On . Color Reset MENU → → → → ENTER → [ Setup ] → → → → → → → → → → → → ENT.
Multi Control Available Modes • PC / DVI • AV • HDMI • MagicInfo Multi Control Assigns an individual ID to the SET. MENU → → → → → ENTER → [ Multi Control ] → ENTER → , → [0~9] • ID Setup Assigns distinctive IDs to the SET.
• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop. If you do unplug the cable, restart the system. • Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program (MagicInfo) may stop.
1. Select MagicInfo in the Source List menu. 2. The MUISetup screen appears. Select the language you want to use. 3. Press the Install button. If you select Do not show again and click the Install button, the Scheduler screen is displayed after rebooting.
Note To finish the MagicInfo , press ALT + F12. Photo The JPEG, BMP file format are supported. Auto Automatically fits the image to the window. Original Shows the properties of the original file.
Slide Show Displays the properties of the original file as they are. Interval Controls the time intervals between image files for a slide show. (5 Sec , 10 Sec , 20 Sec , 30 Sec , 60 Sec ) Adjusting t.
Rotation Displays an image file by turning it clockwise by 90 degrees. Zoom Displays a reduced picture. Adjusting the LCD Display.
Close Closes the image control Menu. Music The MP3 file format is supported. Movie The MPEG1, WMV file format are supported. Adjusting the LCD Display.
Play Plays a movie file. Full Size Plays a movie file in full screen. Adjusting the LCD Display.
OFFICE / HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. Note • Install the proper viewer(freeware) program to see the MS Office(Word, Excel, Power Point) or PDF doucuments. Internet Connects to the Internet Setup Sets various functions in MagicInfo mode.
Schedule View Displays a schedule. TCP/IP Changes the TCP/IP settings. Adjusting the LCD Display.
Connection Modifies the network settings. Password The password can be changed. • The password should be between 6 and 12 characters in numeric format.
• If you forget the password, enter Info, 8, 2 and 4 on the remote control to initialize the password. This will reset the previous settings of Setup mode. File Local : You can delete or copy files on both local and removable disks. Play Option You can set the repeat play and screen settings.
• File Repeat - Select Repeat File to play a movie or tune in the list repeatedly. • List Repeat - Select Repeat List to play movies or tunes in the list in sequence repeatedly. Rotation - Sets the picture orientation. • Landscape - Sets the screen resolution to 1366x768 pixels.
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display.
• Do not use benzene, thinner or other flammable sub- stances, or a wet cloth. • We recommend that a SAMSUNG cleansing agent is used to prevent damage to the screen. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly.
A: Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off.
Q: The screen color is inconsistent. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color image is distorted by dark shadows. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color white is poor. A: Adjust color using Custom under OSD Color Adjustment menu.
A: Check the polarities (+/-) of the batteries. A: Check if the batteries are empty. A: Check if the power is on. A: Check if the power cord is securely connected. A: Check if a special fluorescent or neon lamp is on in the vicinity. Problems related to MagicInfo Note Making a Bootable USB Flash Disk.
Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel → Display → Screen Saver.
Specifications General General Model Name SyncMaster 400TSn-2, 460TSn-2 LCD Panel Size SyncMaster 400TSn-2 40 " Diagonal (101 cm) SyncMaster 460TSn-2 46 " Diagonal (116 cm) Display area SyncMaster 400TSn-2 885.6 mm (H) X 498.15 mm (V) SyncMaster 460TSn-2 1018.
Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz Signal Cable 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (W x H x D) / Weight SyncMaster 400TSn-2 973.2 x 584.4 x 128.1 mm / 38.3 x 23.0 x 5.0 inch (Without Stand) 973.
MagicInfo - Client Item Specification Remarks LAN 1 Gbps USB Keyboard/Mouse, Mass Storage Device Compati- ble USB removable storage can be supported. Contents Photo Supported File Format : BMP/JPEG 22.
Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT- LCD.
Power Off, Screen Saver, or Power Save Mode • Turn the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended.
• Avoid using a combination of characters and background color with large dif- ference in luminance. Avoid using Grey colors, which can cause Image retention easily. Avoid: Colors with big difference in luminance (Black & White, Grey) Change the characters color periodically • Use Bright colors with little difference in luminance.
Note ( Please check CD's User Guide at "OSD Function", some model's will not availa- ble ) Apply the Screen Pixel function on Product • Apply the Screen Pixel function - Symptom: Dot with Black Color move up and down.
- Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Eraser • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) No.
Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.
Europe BELGIUM 02 201 2418 http://www.samsung.com/be (Dutch) http://www.samsung.com/ be_fr(French) CZECH REPUBLIC 800 - SAMSUNG (800-726786) http://www.samsung.com/cz DENMARK 8 - SAMSUNG (7267864) http://www.samsung.com/dk EIRE 0818 717 100 http://www.
Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 800-810-5858 400-810-5858 010-6475 1880 http://www.samsung.com/cn HONG KONG:3698 - 4698 http://www.samsung.com/hk INDIA 3030 8282 1-800-3000-8282 1800 110011 http://www.samsung.com/in INDONESIA 0800-112-8888 http://www.
Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Interlace and Non-Interlace Methods Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method.
Correct disposal of batteries in this product - Europe only ( Applicable in the European Union and other Euro- pean countries with separate battery return sys- tems.) This marking on the battery, manual or packaging in- dicates that the batteries in this product should not be disposed of with other household waste at the end of their working life.
Een belangrijk punt na aankoop van elk apparaat Samsung 400TSN2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung 400TSN2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung 400TSN2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung 400TSN2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung 400TSN2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung 400TSN2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung 400TSN2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung 400TSN2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
