Gebruiksaanwijzing /service van het product CB-21N112T van de fabrikant Samsung
Ga naar pagina of 36
COLOUR TELEVISION Owner’ s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS TELETEXT FUNCTION (depending.
2 ENG S afety Instructions Caution CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 ENG Contents ◆ PREPARING YOUR TELEVISION ■ Safety Instructions ......................................................................................... 2 ■ Caution ..............................................................................
4 ENG Front Panel Controls (depending on the model) ➣ Buttons and markings are subject to change. Using the Buttons on the Front Panel If your remote control no longer works or you have lost it, you can use the controls on the front panel of the television to: ◆ Switch on the television when it is in Standby mode and select channels ( or C/P.
5 ENG Connection Panels ➢ The actual configuration on your TV may be different, depending on your model. Rear of TV A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR B) 75 Ω COAXIAL CONNECTOR FOR AERIAL.
6 ENG Infrared Remote Control (All Functions Except Teletext) ➣ Operation of remote control may be affected by bright artificial light near to the TV set.
7 ENG Infrared Remote Control (Teletext Functions) ➣ Buttons and markings are subject to change. TELETEXT HOLD FASTEXT TOPIC SELECTION TELETEXT NEXT PAGE TELETEXT PREVIOUS PAGE TELETEXT DISPLAY/MIX .
8 ENG You must insert or replace the batteries in the remote control when you : ◆ Purchase the television. ◆ Find that the remote control is no longer operating correctly. 1 Remove the cover of the remote control by pressing the symbol () and pulling the cover in the direction of the arrow.
9 ENG The mains lead is attached to the rear of the television. ☛ If you have purchased this television in the United Kingdom, refer to page 35 for further instructions on plug wiring. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.
10 ENG Plug & Play Feature (depending on the model) When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. 1 If the television is in Standby mode, press the POWER () button on the remote control.
11 ENG Choosing Your Language When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Function .
12 ENG Storing the Channels Automatically Selecting a Channel Numbered Ten or Over When using the numeric buttons to select a channel stored at programme position ten or higher, follow the instructions below. 1 Press the -/-- button. Result: The “ -- ” symbol is displayed.
13 ENG When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found. ◆ The number by which you wish to identify each stored channel. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Channel and press the œ or √ button.
You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
15 ENG If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine- tune the channel manually. 1 Press the MENU () button.
You can exchange the numbers of two channels, in order to: ◆ Modify the numeric order in which the channels have been automatically stored. ◆ Give easily remembered numbers to the channels that you watch most often. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Channel and press the œ or √ button.
17 ENG You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available in the order given: ◆ Custom, Standard, Sports, Natural, Mild. 1 Press the MENU () button. Result: The Picture menu is displayed.
18 ENG Adjusting the Picture Settings Your television has several settings which allow you to control picture quality: ◆ Color Tone, Contrast, Brightness, Sharpness, Color, Tint (NTSC only) 1 Press the MENU () button. Result: The Picture menu is displayed.
You can select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available in the order given: ◆ Custom, Standard, Music, Movie, Speech. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Sound and press the œ or √ button.
20 ENG Adjusting the Sound Settings (depending on the model) The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Sound and press the œ or √ button. 3 Press the ▲ or ▼ button to select the Adjust and press the œ or √ button.
21 ENG Extra Sound Settings (depending on the model) The following sound settings can be adjusted to suit your personal preferences. ◆ Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
22 ENG The “DUAL I-II ” button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is automatically preset to either “Dual- I ” or “STEREO”, depending on the current transmission.
23 ENG You can switch the sound off temporarily, for example you may wish to answer the telephone. 1 Press the MUTE () b u t t on. Result: The sound is switched off and “ ” is displayed. 2 When you wish to turn the sound back on at the same volume as before, press the MUTE () button again (or either of the volume buttons).
24 ENG Setting the Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode by pressing the “SLEEP ( )” button. 1 Press the SLEEP () button on the remote control. Result: If the sleep timer is.
You can set the television’s clock so that the current time is displayed when you press the “INFO ( )” button. You must also set the time if you wish to use the automatic On/Off timers. ➣ The clock setting will be re-activated when pressing the “” (ON/OFF) button on the front panel.
26 ENG Switching the Television On and Off Automatically (depending on the model) You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your.
27 ENG You can restrict viewing by locking the channels of your choice. Example : You can prevent your children from watching unsuitable programmes. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Function and press the œ or √ button.
28 ENG Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen mode to Off .
29 ENG Most television channels carry “teletext,” pages of written information that provide information such as: ◆ Television programme times ◆ News bulletins ◆ Weather forecasts ◆ Sports results ◆ Subtitles for the hard of hearing The teletext pages are organized according to six categories: Part Contents A Selected page number.
30 ENG Selecting a Specific Teletext Page (depending on the model) Press the number buttons on the remote control to enter the page number directly: 1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons.
31 ENG Using FLOF to Select a Teletext Page (depending on the model) The various topics included in the teletext pages are color-coded, and can be selected by pressing the colored buttons on the remote control. 1 Display the teletext contents page by pressing the TTX/MIX () b u tton.
32 ENG Storing Teletext Pages (depending on the model) Up to four teletext pages can be stored. 1 Select the LIST mode. Result: Four 3-digit numbers are displayed in different colors at the bottom of the screen. 2 Press the colored button corresponding to the page that will be replaced.
33 ENG Connecting to the Audio/Video Input/Outputs ➢ The actual configuration on your TV may be different, depending on your model. ➢ The Audio/Video connector on the rear of the television is used for equipment with an RGB output.
34 ENG Automatic Degaussing to Remove Color Patches Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.
35 ENG Wiring the Mains Power Supply Plug (UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
Een belangrijk punt na aankoop van elk apparaat Samsung CB-21N112T (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung CB-21N112T heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung CB-21N112T vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung CB-21N112T leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung CB-21N112T krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung CB-21N112T bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung CB-21N112T kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung CB-21N112T . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
