Gebruiksaanwijzing /service van het product VE926 van de fabrikant Audiovox
Ga naar pagina of 33
VE926 UNDER THE COUNTER 9” TV , AM/FM RADIO, TELEPHONE & D VD PLA YER OWNER’S and INST ALL MANU AL 0 • Slot-in DVD Player & 9” T FT LCD Monitor • Multi-function Remote Control • Bu.
INTRODUCTION W ARNING – T o prevent fire or shock hazard, do not expose this unit to moisture. CAUTION CAUT ION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMOVE CO VER (OR BACK).
INFORMA TION Installation of this equipment shall be in strict acco rdance with the manufacture’s instructions. Failure to follow these instructions may cause or result in the reception of unwanted interference.
IMPORT ANT SAFETY INFORMA TION 1. Read Instructions – All the safe ty and operating instructions should be read b efore the product is operated. 2. Ret ain Inst ructions – The saf ety and operating instructions should be retained for future reference.
4 13. Power-Cord Protection – Route the po wer supply cord in a manner that protects it from being stepped on or pinched by items placed on it. Pay particular attention to the power cord’s plug, and the point where the power cord exits from the product.
21. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement part s specified by the manufacture r or that ha ve the same characteristics as the original part. Unauthorized subs titutions may result in fire, el ectric shock or other hazards.
TABLE OF CONTENTS Before You Begin Installation Remote Control Functions Modes of Operation Using the DVD Loader Technical Specifications Troubleshooting Check List Introduction 1 Important Safety Inf.
CONTENTS OF P ACKAGE 7 1. VE926 re bag g screws (4) (4) (4) 3. Re er (4) 2. Hardwa A. 2” Mountin B. 2-1/2” Mounting screws C. 3”Mounting screws (4) D. Foot (4) E. Hole cap mote Control 4. Multi Height Sp ac 5. Ba t t er y (AAA) nna Adaptor le T emplate al 6.
UNDER CABINET INST ALLA TION 1) Choose an ap propriate mounting lo cation underneath a c abinet or shelf. Clos e proximity to an electri cal outlet, TV antenn a or cable connection a nd telephone jack will fa cilitate a neat, e asy installation. Do not mount the VE 926 above a rang e or oven.
COUNTERTOP/DESKT O P INST ALLA TION NOTE: Use cauti on to avoid damaging the LCD screen and the main unit when co nverting this unit from an under-counter unit to a countertop unit. Leav e the protective plastic on the screen until this procedure is completed.
FRONT P ANEL CONTROLS 1) ON/OFF BUTTON – Power ON/OFF and S tandby Condition(T ime Display). 2) SET BUTTON – Press this button to set the TIME, ALARM, TV Mode or S peaker Mode. 3) TE L BUT TON – Selects the Hands-free speakerphone function. 4) SOURCE BUTTON – Select s the TV , FM, AM, A V1, A V2 and DVD functional modes.
14) VOLUME UP ( X ) BUTTON – Press this button to raise the volume. 15) VOLUME DO WN ( W ) BUTTON – Press this button to lower the volume. 16) SEEK BUTT ONS ( TS -Right Side) – Press these buttons to g o to next available channel with sufficient signal strength.
12 1. MENU Button – When pressed, the LCD control MENU is displayed. m to be changed using 3. item in upward 4. rolls downward through menu items; also adjusts selected item; in NO ttings to the factory settings, highlight RESET and press the LCD Control Functions 2.
9) BA TTER Y INST ALLA TION 13 (Rear View , Battery Size AAA).
REMOTE CONTROL FUNCTIONS (1) EJECT (2) DVD (3) TV (4) SETUP (5) SEEK DN, SEEKUP (6) MENU (7) FR( WW ) (8) STOP( ■ ) (9) PREV (I WW ) (10) Digit 0-9 Select (11) TITLE (12) DISPLA Y (13) SUB TITLE (14.
15 cha DVD REMOTE FUNCTION (1) EJECT : Press this button to Eject and Load the disc tray . (2) DVD: Press this button to select DVD mode of operation. (4) SETUP : Displays setup menu for initial user settings. (5) SEEK DN/UP (21) CH+/- : For selecting item on menu.
16 ban TV REMOTE FUNCTION (3) TV : Press this button to select TV mode of operation. (5) SEEK DN/UP : Use these buttons to advance to the next higher or lower station. (10) 0~9 : Use these buttons to make a direct channel selection (15) SCREEN : Press this button to change Display Mode.
OPERA TION INITIAL SETUP This unit defaults to cable TV mode. When the unit is first powered on, it will detect the cable sy stem and auto-program the TV tuner to the available stat ions. Please wait while the unit auto-programs before attempting to operat e the unit.
18 SETTING and ACTIV A TING the ALA RM NOTE: The VE926 must be turned “OFF” when performing the following procedure. 1) Press the SET button twice to enter the alarm mode, press the P3 button to toggle between the active and deactivated mode. NOTE : If a series of dashes appear (--: --), the Alarm is DEACTIVA TED.
19 * I SETTING THE CABLE TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) CABLE or AIR will appear on the display . 3) Press the SEEK button to select Cable mode. 4) Press the CH UP/DOWN button(s) to select the desired cable mode (STD/IRC/HRC).
USING THE DVD PLA YER Inserting and Ejecting the Disc 1. Set the unit to DVD mode (press sour ce button unt il (-----------) appear s on the display . 2. Insert the disc with the label facing up. 3. The disc will begin playing automatically . If this is a DVD it will go to the DVD menu.
21 Repetitive Play back –T o Repeat a Specific Section 1. Press the REPEA T button once to enable the REPEA T selection screen, follow by pressing the REPEA T button till REPEA T CHAPTER is displa yed, the current chapter or track will be replayed repetitively (CHPTER REPEA T ON).
22 * Th Viewing Different A ngles Angle indicator appears on the upper part of the LCD display . When the Angle indicator appears, press the ANGLE button to view the screen from various angles. * This function may not be incorporated in some titles. Viewing the Main Disc Menu A DVD is divided into sections called titles and ch apters.
During playback press DISPLA Y to display the cu rrent disc playback information. Press display again to remove the display . 1. The type of disc. 12. The number of current subtitle language. 2. The number of current title. 13. The speed at w hich the disc is being read.
PLA Y ING A UDIO CDS When playing an audio CD the display will automatic ally display the disc play back information. The options below show you what information is displayed. Press the ‘DISPLA Y’ button to remove the display . 1. The current track.
25 to choose a folder from the folder list on the left side of the screen. folder ted. een, make sure that the disc is paused and press ENTER. Use EVIOUS ( I WW ) button to ove to the previous song.
YING A JPEG FILE PLA 1. Insert the JPEG Disc into tray . e by pressing the “UP/DOWN” button. y pressing “Play” or “ENTER”. that direction. ontally by pressing the “Up” SETUP he setup menu allows the user to select the play mo de settings.
2. Press ENTER, the following screen will appear . 3. Use the f or g buttons to highlight the desired menu item. 4. Press ENTER button to display the sub-menu. 5. Each sub-menu item provides a number of option items to it s right. Use the f or g buttons to highlight the desired option item for selection.
VIDEO Menu 1. Press the SETUP button to display the main menu (see sample screen under LANGUAGE Menu) 2. Press the d button to highlight Vid eo and press ENTER one time. Use the following screen to select screen aspect ratio. 28 scree scree scree * 4:3 PS : When the player is connected to a normal TV , and a wide picture is shown on the full n.
Rating Menu Press the SETUP button to display the ma in menu (see sample screen under LANGUAGE Menu). Use to select parent al Rating: 1 Kid Safe. 2 G. 3 PG . 4 PG-13. 5 PG-R. 6 R. 7 NC-17. 8 Adult. CHANGE P A SSWORD & RA TING 1. Select Rating by h or d buttons and press ENTER to enter the Rating setup page 2.
TECHNICAL SPECIFICA TIONS GENERAL Power Supply : AC100-240V ~50/60Hz 40watts Operating T emperature : 0 ° ~40 ° C / 32 ° ~104 ° F Operating Humidity : 10% ~ 75% Body Size : 400 X 280 X 56mm / 15.8” x 1 1.0” x 3.25”Inches Weight : 3.5 Kg / 7.
Problem Solution Power does not turn on • Check if the power cord is securely plugged into the wa ll • Check if the batteries of the remote control unit are not depleted. Disc fails to play • Check if the disc is inserted properly into player (Label Side Up).
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products A U D I O V O X E L E C T R O N I C S C O R P . (the Company) warrants to the origina l retail purchase r of this produc t that should this p.
Een belangrijk punt na aankoop van elk apparaat Audiovox VE926 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Audiovox VE926 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Audiovox VE926 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Audiovox VE926 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Audiovox VE926 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Audiovox VE926 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Audiovox VE926 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Audiovox VE926 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
