Gebruiksaanwijzing /service van het product SCC-B5368 van de fabrikant Samsung
Ga naar pagina of 35
ENG DIGITAL COLOR DOME CAMERA user manual SCC-B5366 SCC-B5368 SCC-B5366S SCC-B5368S imagine the possibilities Thank you for purchasing this Samsung product.
2 – DIGITAL COLOR DOME CAMERA CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
English – 3 ENG S n t Safety information Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers fi lled with water on top of the camera. Doing so may cause personal injury due to fi re, electric shock, or falling objects.
4 – DIGITAL COLOR DOME CAMERA W 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 9 . 1 0 1 1 1 2 1 3 1 4 FCC Statement This device complies with part 15 of the FCC Rules.
English – 5 ENG Important Safety Instructions WARNING Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
6 – DIGITAL COLOR DOME CAMERA Contents F ❖ ❖ ❖ ❖ ❖ ❖ ❖ ❖ ❖ Introduction Features 7 Product & Accessories 8 Part Names and Functions 9 Installation Before installation 12 Instal.
English – 7 ENG Introduction FEATURES High Resolution This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. Intelligent Motion Detection & Tracking This is an intelligent function that automatically detects a motion of an object.
8 – DIGITAL COLOR DOME CAMERA Introduction Product & Accessories ❖ Accessories • Test Monitor Cable Tab screw User’s Manual Main Product • Camera P ❖ Coaxial Cable Communication This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the control signal.
English – 9 ENG Introduction PART NAMES AND FUNCTIONS Components of your camera ❖ 렌즈 전원 커넥터 비디오 커넥터 테스트 모니터 출력 Lens Power connector Video connector a T es.
10 – DIGITAL COLOR DOME CAMERA Introduction ❖ No Name Brief description 1 Cover dome Covers the inner cover, lens, and main body to protect them. 2 Inner cover Covers the main body to protect it. 3 Wing locker Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover.
English – 11 ENG Introduction Setting switches ❖ . t h SETUP Switch This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears. ef (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value.
12 – DIGITAL COLOR DOME CAMERA BEFORE INSTALLATION Before installing your camera, you have to read the following cautions. You have to check whether the location (ceiling or wall) can bear fi ve times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged.
English – 13 ENG Installation ❶ Press the Locker button on the bottom of your camera and remove the Cover dome from the Main body using the other hand. The Main body and Inner cover will be exposed to you. ❷ To install and adjust your camera, you have to fi rst remove the Inner cover.
14 – DIGITAL COLOR DOME CAMERA Installation ADJUSTING THE CAMERA DIRECTION When the camera is fi xed on the ceiling, you can adjust the camera viewing angle. You can rotate your camera leftward or rightward (Panning), and can change the slope of your camera upward or downward (Tilting).
English – 15 ENG a e e h e USING ICONS IN THE MENU (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. (RET) Returns to the previous menu. (HOME) Returns to the main menu.
16 – DIGITAL COLOR DOME CAMERA How to use OSD Menu PROFILE e PROFILE f à STANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM In the PROFILE menu, you can confi gure the following camera settings at once.
English – 17 ENG How to use OSD Menu CAMERA SET Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Previous Menu Sub-menus WHITE BAL DAY DAY/NIGHT DAY DAY/NIGHT DAY D A Y -- --- MODE ATW2 ATW1 ATW1 ATW1 A.
18 – DIGITAL COLOR DOME CAMERA How to use OSD Menu CAMERA SETUP e CAMERA SET f CAMERA ID OFF IRIS ALC MOTION (F.FAST)--- DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS OFF XDR MID d c D.
English – 19 ENG How to use OSD Menu . n - ALC LEVEL [00]----I---- BACKLIGHT OFF The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. ② If you set the BACKLIGHT option to BLC , you will see a menu where you can set the BLC area.
20 – DIGITAL COLOR DOME CAMERA How to use OSD Menu AGC FIX LEVEL [01] If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen. As a fi xed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fi xing it.
English – 21 ENG How to use OSD Menu e n. O s 0) . O Note : If the SENS-UP function is set to AUTO , only items of OFF and AUTO are available in the SHUTTER menu. If the SENS-UP mode is set to FIX , the SHUTTER menu will be deactivated. If the FLICKERLESS function is set to ON , the SHUTTER menu will be deactivated.
22 – DIGITAL COLOR DOME CAMERA How to use OSD Menu If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON . If BURST is set to ON , the Burst signal will output together with the black-and-white composite video signal.
English – 23 ENG How to use OSD Menu r o r o You can specify MASK 1 and 2 simultaneously. The MASK is only for determining the mode switching, and any excessive bright area at night will be excluded by the confi gured MASK. Note : If BACKLIGHT is set to BLC , the MASK AREA function will be deactivated.
24 – DIGITAL COLOR DOME CAMERA How to use OSD Menu ATW1 (Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to the ambient conditions. The color temperature ranges from approx. 2500K to 9300K.
English – 25 ENG How to use OSD Menu a n a l a l . e AGC COLOR SUP [LOW , MID, HIGH] Adjust the color scheme according to the AGC value. REVERSE [OFF, H, V, H/V] Mirrors video signals horizontally, vertically, or both. POSI/NEGA [+, -] Output as it is or mirror the video brightness signal.
26 – DIGITAL COLOR DOME CAMERA How to use OSD Menu FENCE This is to detect if a moving object passes through the specifi ed LINE or AREA . In a condition where a moving object is detected in an ana.
English – 27 ENG How to use OSD Menu E o n a f d n . e f y n - How to set the area AREA PIXEL LEVEL [4] <SIZE> <LOCATION> ① If you press the SETUP switch with the AREA option set to ON , you can specify the position and size of the area.
28 – DIGITAL COLOR DOME CAMERA How to use OSD Menu DISPLAY [ON, OFF] With the DISPLAY option set to ON , a motion or a set ADVANCED function will be displayed on the screen, if detected. SENSITIVITY [1~7] Set the sensitivity of the motion detection.
English – 29 ENG How to use OSD Menu L - How to set the point You can set each position of the 4 points. ① If you press the SETUP switch in <POINT> , you will see the points available in the PRIVACY ZONE . Each time you press the SETUP switch, the points available will move.
30 – DIGITAL COLOR DOME CAMERA How to use OSD Menu SYSTEM INFORMATION e SYSTEM INFO f TYPE 3_VAR_NOR_N SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 You can check the system information such as SERIAL NO and CAMERA VER.
English – 31 ENG Specifi cations SPECIFICATIONS Items Sub-items SCC-B5366N/SCC-B5366SN/SCC-B5368N/SCC-B5368SN Camera Type CCTV Camera Image Device 1/3” Super-HAD IT CCD Pixels Total 811 x 508 Eff.
32 – DIGITAL COLOR DOME CAMERA Specifi cations Items Sub-items SCC-B5366N/SCC-B5366SN/SCC-B5368N/SCC-B5368SN AGC Off/On (Max.Level Setting) Line Lock Off/On (Phase Control) Camera ID Off/On (Max.
English – 33 ENG N Specifi cations Items Sub-items SCC-B5366P/SCC-B5366SP/SCC-B5368P/SCC-B5368SP Camera Type CCTV Camera Image Device 1/3” Super-HAD IT CCD Pixels Total 795 x 596 Effective 752 x .
34 – DIGITAL COLOR DOME CAMERA Specifi cations Items Sub-items SCC-B5366P/SCC-B5366SP/SCC-B5368P/SCC-B5368SP AGC Off/On (Max.Level Setting) Line Lock Off/On (Phase Control) Camera ID Off/On (Max.
P.
Een belangrijk punt na aankoop van elk apparaat Samsung SCC-B5368 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung SCC-B5368 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung SCC-B5368 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung SCC-B5368 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung SCC-B5368 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung SCC-B5368 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung SCC-B5368 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung SCC-B5368 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
