Gebruiksaanwijzing /service van het product SCD6040 van de fabrikant Samsung
Ga naar pagina of 169
ENGLISH Digital V ideo Camcorder Owner ’ s Instruction Book Before operating the unit, please read this Instruction Book thoroughly , and retain it for future reference.
ENGLISH Notices and Safety Instructions Notices and Safety Instructions 1. READ INSTRUCTIONS: All the safety and operating instructions should be read before the CAMCORDER is operated. 2. RET AIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference.
ENGLISH Notices and Safety Instructions 9. VENTILA TION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating.
ENGLISH 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and power-line surges.
ENGLISH 22. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. 23. If this power supply is used at 240V AC, a suitable plug adapter should be used.
ENGLISH Contents 2 2 Precautions on Camcorder Care ................................................................................................................................................................................. 8 Quick Start ........
ENGLISH Contents 3 3 Setting the Power Switch ...................................................................................................... ..................................................................................... 31 Using the 5-W ay Button .
ENGLISH 4 4 Programmed Automatic Exposure Modes (PROGRAM AE) ............................................................................. ...................................................... 52 Setting the PROGRAM AE ...............................
Frame Advance – Frame by Frame Playback ..................................................................................................................................................... 75 Searching Still Images .................................
V iewing Still Images ............................................................................................................................................................................................100 V iewing a Single Still Image .......
Using the Digital Zoom ...............................................................................................................................................................................................128 Rotating a Stored Picture .......
ENGLISH Start 8 8 Precautions on Camcorder Care ✤ Please note the following precautions for use: ✤ Please keep this device in a safe place. The device contains a lens that can be damaged by shock. Keep away from the reach of the children. Do not place your device in a wet place.
✤ This device is a Camcorder and a Digital Still Camera in one system and provides a variety of functions. Please read this manual in its entirety . ✤ Before using the device, install the accessories in the following order: 1. Install the battery pack.
ENGLISH Notes and Safety Instructions 10 10 Notes Regarding the Rotation of the LCD Screen ✤ Do not apply excessive force on the moving parts while adjusting the monitor . ✤ Over rotation or excessive force may damage the hinge connecting the LCD monitor to the Camcorder .
✤ T elevision programs, movie video tapes, DVD titles, films and other program materials may be copyrighted. Unauthorized recording of copyrighted materials may infringe on the rights of the Copyright owners and is contrary to copyright laws.
ENGLISH Notes and Safety Instructions 12 12 Notes Regarding the Battery Pack ✤ Make sure the battery pack is fully charged before starting to record.
ENGLISH Notes and Safety Instructions 13 13 ✤ To ensure normal recording and a clear picture, clean the video heads regularly . If a square block-shaped distorts playback, or only a blue screen is displayed, the video heads may be dirty . If this happens, clean the video heads with a dry type cleaning cassette.
ENGLISH Notes and Safety Instructions 14 14 Notes Regarding the Hand Strap ✤ To ensure a steady picture during filming, make sure that the hand strap is properly adjusted.
ENGLISH 15 15 ● Supports IEEE 1394 Digital Data T ransfer By incorporating the IEEE 1394 (i.LINK TM : i.LINK is a serial data transfer protocol and inter-connectivity system, used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produce or edit various images.
ENGLISH 16 16 ✤ Make sure that the following basic accessories are supplied with your digital camcorder . 1. Lithium Ion Battery Pack 2. AC Power Adapter 3. AC Power Cord 4. Multi-A V Cable 5. Instruction Book 6. Lithium battery for Remote Control and Clock 7.
ENGLISH 17 17 Getting to Know Y our Device Front & Left View 1 Built-in MIC 2 Built-in Flash 3 Camcorder Lens 4 Camera Lens 5 Focus Button MF/AF 6 Camera Mode Dial 7D isplay Button 8 5-way Button 9 Menu Button 10 EasyQ Button 11 LCD Open 12 Remote Signal Receiver 13 Charge Indicator 14 Navigation Wheel (Quick Menu / Focus / V olume) 1.
ENGLISH 18 18 Getting to Know Y our Device Rear & Left View 1 PLA Y/STILL (F ADE) 2S TOP (BLC) 3 REW 4 Multiple Display 5 Delete 6F F 7 Built-in Speaker 8U SB Cable Jack 9 DV Cable Jack 10 Multi-A V Cable Jack 11 DC Power in Jack 12 Viewfinder 13 Battery Release 11 .
ENGLISH 19 19 Getting to Know Y our Device Rear & Right View 1 PHOTO 2 FOCUS ADJUST 3 Power Switch 4S T ART/STOP 5 Hand Strap Ring 6 SLOW SHUTTER 7 NITE PIX 8 ZOOM LEVER 9 External MIC input jack 10 Memory Card Slot 11 Hand Strap 1. PHOTO 2. FOCUS ADJUST 3.
ENGLISH 20 20 Getting to Know Y our Device Rear & Bottom View 1 Shoulder Strap Hook 2 Battery Release 3T ripod Receptacle 4T ape Eject Slide Button 5 Lithium Battery Holder 6 Hand Strap Ring 7 Hand Strap Hook 1. Shoulder Strap Hook 2. Battery Release 3.
ENGLISH 21 21 Getting to Know Y our Device Remote Control 1 PHOTO 2S T ART/STOP 3 SELF TIMER 4 ZERO MEMOR Y 5 PHOTO SEARCH 6 A.DUB 7 (FF) 8 (REW) 9 (PLA Y) 10 DIRECTION( , ) 11 F .ADV 12 (STOP) 13 (STILL) 14 (SLOW) 15 DA TE/TIME 16 X2 17 ZOOM 18 DISPLA Y 1.
ENGLISH 22 22 Getting to Know Y our Device OSD (On Screen Display in REC / PLA Y Modes) 1. Battery Level (refer to page 30) 2. EasyQ Mode (refer to page 44) 3. Slow Shutter (refer to page 63) 4. DSE (Digital Special Effects) Mode (refer to page 57) 5.
ENGLISH 23 23 Getting to Know Y our Device OSD (On Screen Display) in (Camera) Modes OSD in CAMERA mode OSD in CAMERA PLA Y mode 2272 16 3 23 1 2 17 15 19 18 20 21 22 4 5 6 7 8 13 10 1 1 9 14 12 30 31 29 27 28 24 25 26 1. Battery Level Display (refer to page 30) 2.
● T urning the OSD on / off 1. Press the DISPLA Y button. Each press of the button toggles the OSD function on and off. 2. When you turn the OSD off, In REC mode : The STBY , REC, EASYQ modes are always displayed on the LCD monitor even when the OSD is turned of f and key input is displayed for 3 seconds before disappearing.
ENGLISH 25 25 The Camcorder : Preparation How to Use the Remote Control ✤ Y ou need to insert or replace the Lithium battery when: ✓ Y ou purchase the camcorder ✓ The remote control does not work ✤ Ensure that you insert the Lithium battery cell correctly , matching the + and — markings.
ENGLISH 26 26 The Camcorder : Preparation Adjusting the Hand Strap ✤ It is very important to ensure that the Hand Strap has been correctly adjusted before you begin your recording. The Hand Strap enables you to: - Hold the camcorder in a stable, comfortable position.
ENGLISH 27 27 The Camcorder : Preparation Connecting a Power Source There are two types of power source that can be connected to your camcorder . - The AC Power Adapter and the AC Power Cord: used for indoor recordings. - The Battery Pack: used for outdoor recordings.
ENGLISH 28 28 The Camcorder : Preparation Using the Lithium Ion Battery Pack 1. Attach the Battery Pack to the device. 2. Connect the AC Power Adapter to the AC Power Cord and connect the AC Power Cord to a wall outlet. 3. Connect the DC cable to the DC jack on the device.
ENGLISH 29 29 The Camcorder : Preparation ✤ When you close the LCD monitor , it turns off and the viewfinder automatically turns on. ✤ The continuous recording times given in the table are approximations. Actual recording time depends on usage. ✤ The Battery Pack should be recharged in an environment between 32¡F (0¡C) and 104¡F (40¡C).
ENGLISH 30 30 The Camcorder : Preparation The Battery Level Display shows the amount of battery power remaining in the Battery Pack. a. Fully Charged b. 20 ~ 40% used c. 40 ~ 80% used d. 80 ~ 95% used e. Exhausted (flickers) (The device will soon turn off.
ENGLISH 31 31 The Camcorder : Preparation Setting the Power Switch ✤ Use the Power Switch to select the working mode of the device. 1. OFF mode: T urn the device off. T o recharge the Battery Pack attached, connect the AC Power Adapter and cables while the Power Switch is set to OFF .
ENGLISH 32 32 The Camcorder : Preparation ✤ The 5-way button is used to make a selection, and to move the cursor left, right, up and down. Using the 5-way button, you can easily make your selection and navigate the menu. ✤ The 5-way button works both in camcorder and camera modes.
ENGLISH 33 33 The Camcorder : Preparation Adjusting the LCD Monitor ✤ Y our camcorder is equipped with a 2.5 inch color Liquid Crystal Display monitor , which enables you to view directly what you are recording or playing back.
ENGLISH 34 34 The Camcorder : Preparation Using the Viewfinder ✤ The Viewfinder will not work when the LCD monitor is open. The FOCUS ADJUST on the viewfinder enables individuals with vision problems to see clearer images. 1. Close the LCD monitor and pull out the Viewfinder .
ENGLISH 35 35 The Camcorder : Preparation Controlling the Sound from the Built-In Speaker ✤ The Built-In Speaker works only in PLA Y mode. ✤ When you use the LCD monitor for playback, you can hear the recorded sound through the Built- In Speaker .
ENGLISH 36 36 The Camcorder : Preparation Using the MENU ✤ Use the MENU button to change or select recording settings and hardware functions. ✤ MENU instructions are displayed both on the LCD monitor and the viewfinder . It is easier to operate the unit using the LCD monitor .
ENGLISH 37 37 The Camcorder : Preparation ✤ A vailable menu items according to the current mode are shown below . MENU SUB MENU REC Mode A vailable Modes PLA Y Mode INITIAL CLOCK SET ✓ ✓✓ ✓ ✓ ✓ (only without a tape) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ CAMERA A/V VIEWER REC PLA Y WL.
ENGLISH 38 38 The Camcorder : Functions ✤ CLOCK SET Menu of your camcorder works in both REC and PLA Y modes. ✤ The DA TE/TIME information is automatically recorded onto the tape. 1. Press the MENU button. The top menu including INITIAL is displayed.
ENGLISH 39 39 The Camcorder : Functions ✤ Displays the DA TE / TIME on the LCD monitor while recording or playing a tape. ✤ The DA TE / TIME setting works in both REC and PLA Y modes. 1. T urn on your camcorder by setting the Power Switch to REC mode.
ENGLISH 40 40 The Camcorder : Functions ✤ The WL.REMOTE menu works in both REC and PLA Y modes. ✤ The WL.REMOTE option allows the user to enable or disable the remote control for use in Camcorder modes. 1. Press the MENU button. The top menu including INITIAL is displayed.
ENGLISH The Camcorder : Functions 41 41 ✤ The Beep Sound function works in Camcorder modes. 1. Press the MENU button. The top menu including INITIAL is displayed. 2. Press the OK button to select INITIAL . The submenu including BEEP SOUND displays. 3.
ENGLISH The Camcorder : Functions 42 42 ✤ The Demonstration automatically guides you through the major functions of your camcorder so that you may more easily take advantage of all the features provided. ✤ The DEMONSTRA TION is only available in Camcorder s REC mode (when no tape is inserted).
ENGLISH The Camcorder : Functions 43 43 ✤ The TV DISPLA Y function works in both REC and PLA Y modes. ✤ Y ou can select the output path for the OSD (On Screen Display). OFF: The OSD appears only on the LCD monitor and the V iewfinder . ON: The OSD appears on the LCD screen, the V iewfinder and the TV screen.
ENGLISH 44 44 The Camcorder : Functions Using EASYQ Mode ✤ EASYQ mode only works in REC mode. ✤ EASYQ allows the user to easily make quality recordings. 1. T urn on your camcorder and set the Power Switch to REC mode. 2. Press the EASYQ button to enter EASYQ mode.
ENGLISH 45 45 The Camcorder : Functions Manual Focus / Auto Focus (MF/AF) ✤ MF/AF mode only works in REC mode. ✤ In most situations, you will obtain the best results using AF (Auto Focus). ✤ Manual Focus may not be the optimum setting for everyday filming.
ENGLISH 46 46 The Camcorder : Functions Zooming In and Out with the Digital Zoom ✤ Y our camcorder supports 10x optical and digital zooming that can produce 900x zooming in total. Zooming is a technique that lets you change the size of the subject captured in a scene.
ENGLISH 47 47 The Camcorder : Basic Recording Inserting and Ejecting a Cassette ✤ Do not apply excessive force when inserting a cassette or closing the cassette holder , as it may damage the moving parts. ✤ Do not use any tapes other than MiniDV cassettes.
ENGLISH 48 48 The Camcorder : Basic Recording ✤ When you have recorded something that you wish to keep, you can protect from being accidentally erased . a. Protecting a Cassette: Push the Write Protect T ab on the cassette so that the hole is uncovered.
ENGLISH 49 49 The Camcorder : Basic Recording Making Y our First Recording Before you begin! - Insert the Lithium Ion Battery (refer to page 28) - Charge your battery (refer to page 28) - Set the Clock (refer to page 38) - Insert a cassette tape (refer to page 47) 1.
ENGLISH 50 50 The Camcorder : Basic Recording ✤ Y ou can view a recording using the REC SEARCH +, — function while in STBY mode. REC SEARCH — enables you to play the recording backwards and REC SEARCH + enables you to play it forwards, for as long as you keep either button pressed down.
ENGLISH 51 51 The Camcorder : Basic Recording Playing Back a T ape Y ou Have Recorded Using the LCD Monitor ✤ Y ou can monitor the recorded image on the LCD monitor . 1. T urn on your camcorder and set the Power Switch to PLA Y mode. 2. Insert the tape you want to playback (refer to page 47).
ENGLISH 52 52 The Camcorder : Advanced Recording Programmed Automatic Exposure Modes (PROGRAM AE) ✤ The Program AE function works only in REC mode. ✤ It allows you to adjust the shutter speed and aperture setting to suit different recording conditions as well as allowing creative control over the depth of field.
ENGLISH 53 53 The Camcorder : Advanced Recording 1. T urn on your camcorder and set the Power Switch to the REC mode. 2. Press the MENU button. The top menu including CAMERA is displayed. 3. Press the DOWN button to select CAMERA , then press the OK button.
ENGLISH 54 54 The Camcorder : Advanced Recording Setting the White Balance for Camcorder Use (WHT .BALANCE) ✤ The CCD (Charge Coupled Device) determines color using color temperature, White Balance is a tool used to adapt video equipment to the color temperature of the dominant light source in a given scene/environment.
ENGLISH 55 55 The Camcorder : Advanced Recording Setting the Digital Zoom for Camcorder Use (D. ZOOM) ✤ Y our camcorder provides a 10x optical zoom. Zooming more than 10x is achieved digitally , up to 900x when combined with the optical zoom. 1. T urn on your camcorder and set the Power Switch to REC mode.
ENGLISH 56 56 The Camcorder : Advanced Recording Setting the Digital Image Stabilizer (DIS) ✤ The Digital Image Stabilizer works only in REC mode. ✤ DIS is a function that, within reasonable limits, compensates for shaking movements produced when filming hand-held.
ENGLISH 57 57 The Camcorder : Advanced Recording Applying Digital Special Effects to Y our Recording (DSE) ✤ The Digital Special Effect function works only in REC mode. ✤ Y ou can select various special effects using the Digital Special Ef fects menu.
ENGLISH 58 58 The Camcorder : Advanced Recording Selecting a Digital Special Effect in Camcorder Mode 1. T urn your camcorder on by setting the Power Switch to REC mode. 2. Press the MENU button. The top menu including CAMERA is displayed. 3. Press the DOWN button to select CAMERA , then press the OK button.
ENGLISH 59 59 The Camcorder : Advanced Recording Selecting the Record Mode for Camcorder Use ✤ Y ou can select the Recording mode in the REC and PLA Y (DV IN) modes of your camcorder . ✤ This camcorder records and plays back in SP (Standard Play) and LP (Long Play) modes.
ENGLISH 60 60 The Camcorder : Advanced Recording Selecting the Audio Mode for Camcorder Use ✤ Y ou can select the Audio recording mode in REC mode. ✤ This camcorder records audio signals in two ways. - 12bit: Y ou can record two 12bit stereo sound tracks along with the tape.
ENGLISH 61 61 The Camcorder : Advanced Recording Cutting Off Wind Noise (WIND CUT) ✤ The WIND CUT function works only in Camcorder (REC and PLA Y) modes. ✤ To reduce microphone wind noise, use the Wind Cut function. ✤ Use the Wind Cut function when recording in a windy place such as on the beach, in the mountains or near buildings.
✤ The Back Light Compensation function works only in REC mode. The Back Light Compensation function helps to make the subject brighter when the light source is behind the subject, throwing their features into shadow , or when the subject is in the shade but the background is brightly lit.
ENGLISH 63 63 The Camcorder : Advanced Recording Setting the Slow Shutter Speed ✤ The Slow Shutter function works only in REC mode. ✤ The Slow Shutter allows the user to record dark subjects or in darker areas, making them even brighter than they would be under good natural lighting.
ENGLISH 64 64 The Camcorder : Advanced Recording NITE PIX ✤ The NITE PIX function works only in REC mode. ✤ The NITE PIX enables you to record subjects in dark lighting conditions. 1. T urn your camcorder on by setting the Power Switch to REC mode.
ENGLISH 65 65 The Camcorder : Advanced Recording POWER NITE PIX ✤ The POWER NITE PIX function works only in REC mode. ✤ With its maximum sensitivity , POWER NITE PIX enables you to make dark subjects and areas brighter . POWER NITE PIX works with the Slow Shutter function to produce brighter recordings under extremely dark lighting conditions.
ENGLISH 66 66 The Camcorder : Advanced Recording Setting the Shutter Speed and Exposure ✤ Shutter Speed function works only in REC mode. ✤ Adjusting the exposure and shutter speed helps the user to control the image to be recorded. Greater exposure results in a brighter image while shorter shutter speeds make the image darker .
ENGLISH 67 67 The Camcorder : Advanced Recording Using the Fade In / Out Function ✤ The Fade In / Out function works only in REC mode. ✤ Y ou can give your recordings more professional look by using special effects such as fading in at the beginning and fading out at the end of a sequence.
ENGLISH 68 68 The Camcorder : Advanced Recording Setting Up and Using the Quick Menu ✤ The Quick Menu is only available in REC mode. ✤ Quick Menu is used to access camcorder functions by simply using the Navigation Wheel. Quick Menu provides easier access to the frequently used menus without using the MENU button.
ENGLISH 69 69 The Camcorder : Advanced Recording - Provides a quick way to access the Digital Special Effects. - Using the Navigation Wheel, you can quickly set and release the special effect for your filming. Pressing the Navigation Wheel while DSE is highlighted will toggle the DSE between OFF and the selected DSE mode.
ENGLISH 70 70 The Camcorder : Advanced Recording - Provides a quick way to access the SHUTTER Speed Settings. 1. T urn the Navigation Wheel (Quick Menu) to select the Navigator icon ( ). 2. Press the Navigation Wheel (Quick Menu) to select SHUTTER . The adjustable Shutter Speed control bar appears on the screen.
ENGLISH 71 71 The Camcorder : Advanced Recording T aking Photos ✤ Y ou may take still images while in REC mode and store the images on tape. This function is useful when you want to take a snapshot of a subject while you are using the Camcorder . ✤ If you want to take a higher resolution still image, switch to (CAMERA) mode (refer to page 99).
ENGLISH 72 72 The Camcorder : Advanced Recording V arious Recording T echniques ✤ In some situations, different recording techniques may be required for more dramatic results. Suitable for most recording situations. Make a recording while viewing the LCD monitor from above.
ENGLISH 73 73 The Camcorder : Playback Playing Back a Recorded T ape ✤ The tape playback functions work only in PLA Y mode. ✤ It is handy and practical to view a tape using the LCD monitor almost anywhere (i.
ENGLISH 74 74 The Camcorder : Playback V arious Functions in PLA Y modes ✤ The (PLA Y/STILL), ( ST OP), (FF) , (REW) buttons are located both on the Camcorder and the Remote Control. ✤ The F .ADV (Frame advance), ( SLOW) buttons are located only on the Remote Control.
ENGLISH 75 75 The Camcorder : Playback ✤ Y ou can playback your recording at 2x normal speed using the X2 button on the remote control. ✤ Forward X2 Playback Press the X2 button on the Remote Control during Playback. To resume normal playback, press the (PLA Y/STILL) button.
ENGLISH 76 76 The Camcorder : Playback Searching Still Images ✤ Searching the Still Images recorded on a tape works only in PLA Y mode. ✤ Recorded Still Images are played back using stop-motion. 1. T urn your camcorder on by setting the Power Switch to PLA Y mode.
ENGLISH 77 77 The Camcorder : Playback Dubbing an Additional Sound T rack to Y our Recording ✤ Audio Dubbing works only in PLA Y mode. ✤ Y ou can dub additional audio to your recordings using the remote control. Dubbing is supported only when the recorded image has been recorded in SP (Standard Play) mode using the 12-bit settings for audio.
ENGLISH 78 78 The Camcorder : Playback Playing Dubbed Sound Y ou may select the audio track to be played back. 1. T urn your camcorder on by setting the Power Switch to PLA Y mode. 2. Move to the position of recorded video that has dubbed audio track by using the (REW), (FF) or (PLA Y/STILL) buttons.
ENGLISH 79 79 The Camcorder : Playback Setting the Zero Memory on the T ape (Ending Position) ✤ The ZERO MEMORY function works in both REC and PLA Y modes.
ENGLISH 80 80 The Camcorder : Playback PB DSE - Applying Digital Special Effects to Y our Recording During Playback ✤ The PB DSE function works only in PLA Y mode. ✤ The PB DSE function allows the user to apply digital effects to recorded video and still pictures.
ENGLISH 81 81 The Camcorder : Playback PB ZOOM- Zooming During Playback ✤ The PB ZOOM function works only in PLA Y mode. ✤ The PB ZOOM function allows the user to zoom in or out on recorded image and still pictures. ✤ The Zooming Range for PLA Y mode: 1.
ENGLISH 82 82 The Camera : Preparation ✤ T urn the Mode Dial to select a Camera mode by setting the selector as illustrated. ✤ A vailable Camera Modes are: (PROGRAM): Sets aperture and shutter spe.
1. Open the Memory Slot lid. 2. Insert the Memory Card into the Slot until it softly clicks. 3. Close the Memory Slot. 1. Open the Memory Slot lid. 2. Slightly push the memory card inwards to pop it out. 3. Pull the Memory Card out of the slot and close the lid.
ENGLISH 84 84 The Camera : Preparation ✤ Y ou can use the FORMA T function to completely delete all still images/motion clips and options on the Memory Card, including protected still images/motion clips. ✤ The format function restores the Memory Card to its initial state.
Size TIFF SUPER FINE FINE NORMAL SIZE 30fps 15fps 2272x1704 Approx. 1 Approx. 7 Approx. 15 Approx. 23 320 x 240 Approx. 2min Approx. 3min 2048x1536 Approx. 1 Approx. 9 Approx. 19 Approx. 28 1600x1200 Approx. 2 Approx. 15 Approx. 31 Approx. 47 1024x768 Approx.
ENGLISH 86 86 The Camera : Functions Numbering Stored Pictures ✤ File numbers will be automatically given, in the order they were recorded, to pictures taken and stored in the Memory Card. By default, pictures are stored on the memory card in a folder labeled 100SSDVC, with four-digit file numbers, starting from DCAM0001.
ENGLISH 87 87 The Camera : Functions Setting the Picture Quality ✤ Set the level of picture quality for the still images before you begin. The number of stored images varies depending on the memory card capacity , picture size and quality . 1. T urn your camera on by setting the Power Switch to (CAMERA) mode.
ENGLISH 88 88 The Camera : Functions Setting the Picture Size ✤ Set the picture size for still images before you begin. The number of stored images varies depending on the memory card capacity , picture size and quality . 1. T urn your camera on by setting the Power Switch to (CAMERA) mode.
ENGLISH 89 89 The Camera : Functions Setting the Menu Language ✤ Y ou can choose a language for the OSD (On-screen Display) menu. ✤ Menus and messages can be displayed in English, Spanish, French, German, and Italian. 1. T urn your camera on by setting the Power Switch to (CAMERA) mode.
ENGLISH 90 90 The Camera : Functions Setting the LCD Brightness ✤ Y ou can adjust the brightness of the LCD monitor for Camera use. 1. T urn your camera on by setting the Power Switch to (CAMERA) mode. 2. Press the MENU button. The top menu including (SET) is displayed.
ENGLISH 91 91 The Camera : Functions Setting the Clock ✤ A built-in clock for Camera mode creates the T ime Stamp. For further information on T ime Stamp Imprinting, refer to the next page. 1. T urn your Camera on by setting the Power Switch to (CAMERA) mode.
ENGLISH 92 92 The Camera : Functions Setting the IMPRINT Option ✤ IMPRINT allows the user to place a date stamp on a picture. Y our camera has a built-in clock that maintains the date and time in a 24-hour format. The camera clock needs to be set if you plan to use the date stamp to imprint the date and time on your picture.
✤ Y ou can enable or disable the Wireless Remote Control for use in Camera mode. ✤ Using the Wireless Remote Control, you can easily and remotely manipulate your camera.
ENGLISH 94 94 The Camera : Functions Setting the Beep Sound Setting the Shutter Sound ✤ Y ou can turn on or off the beep sound for each press of a button for Camera use. 1. T urn your Camera on by setting the Power Switch to (CAMERA) mode. 2. Press the MENU button.
ENGLISH 95 95 The Camera : Functions MENU MYCAM SUB MENU 1 SUB MENU 2 Functions Page Mode FILE LANGUAGE FORMA T LCD USB DA TE&TIME IMPRINT WL.REMOTE BEEP SOUND SHUTTER SOUND Q.
MENU SUB MENU 1 SUB MENU 2 Functions Page Mode 2272 X 1704 2048 X 1536 1600 X 1200 1024 X 768 640 X 480 320 X 240 TIFF SUPER FINE FINE NORMAL MUL TI SPOT NORMAL B & W SEPIA NEGA TIVE SOFT NORMAL V.
MENU SUB MENU 1 SUB MENU 2 Functions Page Mode MYSET1 MYSET2 MYSET3 NIGHT PORTRAIT CHILDREN LANDSCAPE CLOSE-UP SUNSET DA WN BACKLIGHT FIREWORKS BEACH&SNOW 30fps 15fps ST ANDARD INDEX PRINT SIZE CA.
ENGLISH 98 98 ✤ Pressing the DISPLA Y button while the menu is displayed on the LCD monitor helps to read the menu screen by changing the background into black.
ENGLISH 99 99 The Camera : Basic Picture T aking T aking and Viewing Y our First Photo 1. Insert the memory card (refer to page 83) and connect a power source (refer to page 27). 2. T urn your camera on by setting the Power Switch to (CAMERA) mode and turn the Mode Dial to select (PROGRAM) mode.
ENGLISH 100 100 ✤ Y ou can playback and view still images stored on the Memory Card. ✤ Still images stored on the memory card are all displayed in the same size despite their original resolution using the LCD monitor or viewfinder .
ENGLISH 101 101 The Camera : Basic Picture T aking 1. T urn your camera on by setting the Power Switch to (CAMERA) mode. 2. T urn the Mode Dial to set to ( PLA Y) mode. A stored picture is displayed on the LCD monitor . 3. Press the MENU button. The top menu including (SLIDE) is displayed.
ENGLISH 102 102 The Camera : Basic Picture T aking ✤ After taking a picture, your camera automatically shows just taken still image shortly and then returns to recording mode after few seconds. Y ou can set the Q.V iew duration using this menu. ✤ The Q.
ENGLISH 103 103 The Camera : Basic Picture T aking 1. Load a memory card that has previously stored pictures (refer to page 83). 2. T urn your camera on by setting the Power Switch to (CAMERA) mode. 3. T urn the Mode Dial to set the (PLA Y) mode. A stored picture is displayed on the LCD monitor .
ENGLISH 104 104 The Camera : Basic Picture T aking 1. T urn your camera on by setting the Power Switch to (CAMERA) mode. 2. T urn the Mode Dial to set to ( PLA Y) mode. A stored picture is displayed on the LCD monitor . 3. Press the MENU button. The top menu including (DELETE) is displayed.
ENGLISH 105 105 The Camera : Basic Picture T aking Delayed Recording – Self Timer ✤ Using the remote control, delaying the shutter release (in order to take self-photography and various other camera uses) is available. 1. T urn your camera on by setting the Power Switch to (CAMERA) mode.
ENGLISH 106 106 The Camera : Basic Picture T aking T aking Motion Clips (MPEG) Using the Camera ✤ Y ou can record movies using the (MOVIE) mode. 1. T urn your camera on by setting the Power Switch to (CAMERA) mode. 2. Set the Mode Dial to (MOVIE). The indicator appears on the LCD monitor .
ENGLISH 107 107 The Camera : Basic Picture T aking ✤ Y ou can record movies using the (MOVIE) mode. ✤ Before recording a motion clip, insert a Memory Card (refer to page 83). 1. T urn your camera on by setting the Power Switch to (CAMERA) mode. 2.
ENGLISH 108 108 The Camera : Basic Picture T aking 1. T urn your camera on by setting the Power Switch to (CAMERA) mode. 2. T urn the Mode Dial to (PLA Y) mode. A stored picture or movie is displayed. 3. Press the LEFT or RIGHT button to locate the motion clip to be played back.
ENGLISH 109 109 The Camera : Advanced T echniques Setting the Focus ✤ In Camera modes, the automatic focus will not engage unless the PHOTO button is pressed halfway down. ✤ To get good image quality , please verify the focus is set properly before fully depressing the PHOTO button.
ENGLISH 110 110 The Camera : Advanced T echniques Using the Built-In Flash ✤ The Flash works in (CAMERA) modes and allows the user to take brighter pictures in dark locations (i.e. nighttime shooting, indoors and in shaded areas). ✤ Auto Flash, Red-Eye Reduction, Fill-In Flash, Slow Sync and Flash Cancel modes are available.
ENGLISH 111 111 The Camera : Advanced T echniques A vailable Flash Modes by Camera Mode PROGRAM O O O O O A Aperture Priority X X O X O S S. Speed Priority X X O X O M Manual X X O X O EASYQ X O X X O.
ENGLISH 112 112 Setting the Focus Modes ✤ Choose a focus mode to suit your subject and composition. Auto focusing, Continuous Auto focusing, Manual focusing, and Macro focusing modes are available. ✤ Focus will be automatically set near the center of the frame.
ENGLISH 113 113 The Camera : Advanced T echniques ✤ Allows the user to focus rapidly , whereas the single auto focus gives a less rapid response but saves battery power . ✤ When Continuous Auto Focus mode is selected, [CAF] is displayed on the LCD monitor .
ENGLISH 114 114 The Camera : Advanced T echniques ✤ The Macro Focusing mode allows the user to take a close-up picture of a detailed subject. ✤ Y our camera can focus on subjects as close as 4cm (about 1.57 inches). ✤ The Macro mode works only in (CAMERA) modes.
ENGLISH 115 115 The Camera : Advanced T echniques Setting the Exposure Exposure, shutter speed and ISO sensitivity affects picture brightness and overall picture quality . Longer exposure, slower shutter speed and higher ISO sensitivity brighten the picture.
ENGLISH 116 116 The Camera : Advanced T echniques ✤ MUL TI and SPOT AE modes work only in (CAMERA) mode. ✤ Use this function to adjust the exposure of the subject to obtain better results. ✤ MUL TI AE meters the lighting condition of the overall image by metering the exposure on multiple points.
ENGLISH 117 117 ✤ Preset SCENE modes are provided to assist the user in taking pictures under various lighting conditions. ✤ The SCENE modes direct the camera to automatically adjust the aperture, shutter speed and white balance according to the lighting conditions and preset settings.
ENGLISH 118 118 The Camera : Advanced T echniques ✤ If the image in the LCD monitor is too bright, choose a negative value for exposure compensation. ✤ If the image in the LCD monitor is too dark, choose a positive value for exposure compensation.
ENGLISH 119 119 The Camera : Advanced T echniques ✤ By controlling the aperture, the user may adjust the overall picture brightness. ✤ Large apertures require more lighting and soften the background details. ✤ Smaller apertures will increase the depth of field, bringing the main subject and the background into focus.
ENGLISH 120 120 The Camera : Advanced T echniques ✤ By controlling the shutter speed and aperture, you may adjust the overall brightness of the picture. ✤ Slower shutter speeds require more lighting. Faster shutter speeds require less lighting. ✤ For fast moving subjects, a slow shutter setting will produce a motion blurring effect.
ENGLISH 121 121 The Camera : Advanced T echniques ✤ Digital Cameras capture an image using a CCD (Charge Coupled Device) that takes in lighting information and detects the color . ✤ The color balance may vary depending on the lighting conditions; white balance is used to preserve natural colors under different lighting conditions.
ENGLISH 122 122 ✤ Y ou can set the white balance in (MOVIE), (PROGRAM), A, S, and M modes. 1. Set the White Balance Mode to (MANUAL), following steps 1 ~ 4 on the previous page. 2. Frame your camera on a white area (such as a wall), filling the LCD monitor (or viewfinder) with white.
ENGLISH 123 123 The Camera : Advanced T echniques ✤ Sensitivity is a measure of how rapidly the camera reacts to a light source. The higher the sensitivity , the brighter the picture is under the same exposure condition. ✤ Allowing the flash to fire will help brighten the picture.
ENGLISH 124 124 The Camera : Advanced T echniques Using Digital Special Effects ✤ The DSE (Digital Special Effects) function works only in Camera modes. ✤ Digital Special Effects allow the user to create professional looking ef fects on their pictures.
ENGLISH 125 125 The Camera : Advanced T echniques T aking Multiple Images Using Auto Exposure Bracketing ✤ From time to time, determining the best exposure setting for a picture may be difficult and you may not have time to check the results and try again.
ENGLISH 126 126 Precautions on Camcorder Care The Camera : Advanced T echniques T aking Multiple Images using Continuous Shot ✤ Continuous Shot allows the user to take consecutive pictures of a moving object. ✤ Continuous recording will occur while the PHOTO button is being pressed.
ENGLISH 127 127 Quick Start The Camera : Advanced T echniques Setting the Sharpness ✤ This option allows the user to obtain sharper images by processing the picture after it is shot. 1. T urn your camera on by setting the Power Switch to (CAMERA) mode.
ENGLISH 128 128 Precautions on Camcorder Care The Camera : Advanced T echniques Using the Digital Zoom ✤ A 3x optical zoom and 12x digital zoom are available. The Zoom indicator shows the current zooming status. A divider indicates the border between optical and digital zooming.
ENGLISH 129 129 Quick Start The Camera : Advanced T echniques Rotating a Stored Picture ✤ This function works only in the Camera (PLA Y) mode. ✤ This function works only for still images recorded onto the memory card. ✤ Y ou can rotate a stored picture while viewing it.
ENGLISH 130 130 Precautions on Camcorder Care The Camera : Advanced T echniques Resizing a Stored Picture ✤ This function works only in the Camera (PLA Y) mode. ✤ This function works only for still images recorded onto the memory card. ✤ Only downsizing is available.
ENGLISH 131 131 Quick Start The Camera : Advanced T echniques Customizing Y our Camera – MySET Menu ✤ MySET menu works only in (CAMERA) Modes. ✤ Customize your camera to memorize frequently accessed settings for easier use. MySET allows the user to recall memorized settings to ready the camera in seconds.
ENGLISH 132 132 The Camera : Advanced T echniques ✤ After saving your MySET configurations as instructed in the previous page, follow these steps to recall your MySET configuration at a later time: 1. T urn your camcorder on by setting the Power Switch to (CAMERA) mode.
ENGLISH 133 133 The Camera : Advanced T echniques Notes ✤ This function works in (CAMERA) mode. ✤ This function changes the starting image that is displayed when the camera is turned on. ✤ Y ou can select and resize a still image to appear as your new start-up image.
ENGLISH 134 134 Precautions on Camcorder Care The Camera : Advanced T echniques Zooming & T rimming Recorded Pictures (Playback ZOOM) While Viewing ✤ This function allows the user to have a more detailed view of the picture using the LCD monitor .
ENGLISH 135 135 Quick Start The Camera : Advanced T echniques Protecting Stored Pictures ✤ Selecting PROTECT from the MENU saves valuable images from accidental deletion. ✤ Y ou can set or cancel the protection on your pictures in (PLA Y) mode. ✤ Y ou may set a picture to LOCK to protect it, or UNLOCK to cancel the protection.
✤ To Select Pictures to be Protected ✓ Select SELECT . 1. Press the DOWN or UP button to select SELECT , then press the OK button. The multiple pictures screen appears. 2. T o move the cursor , use the LEFT , RIGHT , DOWN or UP buttons then press the MENU button to lock the selected picture.
✤ By connecting the camera to printers with PictBridge support (sold separately), you can send images from the memory card directly to the printer with a few simple operations using the camera buttons. ✤ With the PictBridge Support, you can control the printer directly through your camera in order to print out stored pictures.
ENGLISH 138 138 Miscellaneous Information ✤ To select images, select SELECT menu. 1. In the PictBridge settings menu, press the DOWN button to select SELECT . 2. Press the RIGHT button. The available options are listed: ONE PIC and ALL PICs. 3. Select an option using the DOWN or UP button, then press the OK button.
ENGLISH 139 139 Miscellaneous Information ✤ To customize your print options such as P APER SIZE, LA YOUT , P APER TYPE, PRINT QUALITY, DA TE PRINT , and FILE NAME imprint options, select the PRINTER SETUP menu. 1. In the PictBridge settings menu, press the DOWN button to select PRINTER SETUP .
ENGLISH 140 140 Miscellaneous Information ✤ After selecting images and the PRINTER SETUP settings, print your pictures by choosing the PRINT menu. 1. In the PictBridge settings menu, press the DOWN button to select PRINT . The available options are listed: ST ANDARD and INDEX.
ENGLISH 141 141 Miscellaneous Information ✤ DPOF PRINT requires at least one DPOF marked image on the memory card. 1. Set the DPOF settings as described in page 142. 2. Connect your camera and the printer as described in page 137. The PictBridge settings menu is displayed.
ENGLISH 142 142 Precautions on Camcorder Care ENGLISH Miscellaneous Information Printing Y our Pictures – Using the DPOF (Digital Print Order Format) ✤ Mark your images with DPOF (Digital Print Order Format) marking to utilize automatic printing. ✤ DPOF menu only works in (CAMERA) s PLA Y mode.
ENGLISH 143 143 1. Press the MENU button, then select (DPOF) by using the LEFT and RIGHT button. Submenu including INDEX is displayed. 2. Press the DOWN or UP button to select INDEX , then press the RIGHT button. The available options of NO and YES are displayed.
ENGLISH 144 144 5. Press the OK button to set your choice and exit the multiple pictures screen If ALL PICs is selected, print size setting menu is displayed. Press the UP or DOWN button to set the print size. T o exit the multiple pictures screen, press the OK button.
ENGLISH 145 145 Quick Start Miscellaneous Information Connecting to Other Devices – TV and VCR ✤ Y ou can connect your device to a TV set directly or through a VCR to view your recordings and pictures on the TV screen, using the Multi-A V cable.
ENGLISH 146 146 Miscellaneous Information ✤ If there are no input terminals for external devices on your TV set and a VCR is connected to your TV set using a coaxial cable, you can utilize the VCR to connect your camcorder to the TV set. To Connect to a VCR that is Connected to Y our TV Set 1.
ENGLISH 147 147 Miscellaneous Information ✤ Y ou can set the OSD (On-Screen Display) menu so it does not display on the TV . ✤ In the camcorder’s VIEWER menu, you can turn the TV DISPLA Y on or of f. ✤ T urning the TV DISPLA Y off does not af fect the video transfer to the TV .
ENGLISH 148 148 Miscellaneous Information ✤ Y ou can copy your recordings to a regular blank video tape or DVD. ✤ Insert a blank cassette in your VCR or a blank DVD in your DVD Recorder to copy your camcorder recordings. ✤ Insert your recorded cassette in your camcorder .
ENGLISH 149 149 Quick Start Miscellaneous Information Connecting to Other Devices – PC ✤ Y ou can connect your camcorder to a PC for copying or editing recorded video. ✤ DV and USB connections are supported. ✤ This function works only in the Camera (PLA Y) mode.
ENGLISH 150 150 Miscellaneous Information To connect your Camcorder to a PC using DV cable 1. T urn your camcorder on by setting the Power Switch to PLA Y mode. 2. Connect the DV cable to your camcorder s DV terminal which is located on the bottom left side.
ENGLISH 151 151 Miscellaneous Information ✤ Using the USB cable, you can connect your Camcorder to a PC that supports USB connections. Use the provided USB cable for connection to a PC. ✤ A USB cable for USB connection is provided with the product.
ENGLISH 152 152 Miscellaneous Information ✤ DVC Media Software CD includes the driver and software for connecting and utilizing Samsung DVC Camera to the PC. ✤ During the use of PC, if the program is deleted or error message comes out, you can reinstall it with this CD.
ENGLISH 153 153 Miscellaneous Information To Copy Still Images Using a USB Connection ✓ Set your camera to (CAMERA) mode. Copying still images only works in (CAMERA) mode. ✓ The PC will recognize your camera as a removable mass storage device. ✓ Use your Windows Explorer or other file browser to locate your stored images.
ENGLISH 154 154 Precautions on Camcorder Care Maintenance Cleaning and Maintaining the Camcorder ✤ For prolonged use of your device, read following instructions carefully . For the safekeeping of your device, follow these steps. ✓ Remove the cassette (refer to page 47).
ENGLISH 155 155 To Clean the Exterior of Y our Device ✓ To clean the exterior , use a soft dry cloth. Wipe the body gently . Do not apply excessive force when cleaning, gently rub the surface. ✓ The LCD monitor surface should not be pressed. Use a soft dry cloth to clean the surface.
ENGLISH 156 156 Precautions on Camcorder Care Maintenance Using Y our Camcorder Abroad ✤ Each country or region has its own electric and color systems.
ENGLISH 157 157 Quick Start T roubleshooting ✤ If your device fails to function as expected, please check the following before contacting service personnel.
ENGLISH 158 158 Tr oubleshooting ✤ If these instructions do not solve your problem, contact your nearest Samsung dealer or authorized service center/personnel.
Symptom Possible Causes Measure Digital zoom does not work Files stored in the memory card cannot be deleted Images on the LCD monitor appear dark Rear of the LCD monitor is hot Play , rewind and fast.
ENGLISH 160 160 Precautions on Camcorder Care Specifications Specifications Model Name Camcorder System Vi deo Signal V ideo Recording System Audio Recording System Usable Cassette T ape Speed T ape R.
ENGLISH 161 161 Lens CAMCORDER CAMERA Optical Zoom Ratio Digital Zoom Ratio Focal Length (f) F. No (Wide / T ele) Zooming Speed Filter Diameter 0 Lux Recording Macro CCD Size Pixel (Max / Effective) S.
ENGLISH 162 162 Index Audio dubbing ............................................................................................ 77 AUDIO MODE ............................................................................................ 60 BLC ........
ENGLISH 163 163 Index REC MODE ................................................................................................ 31 Remote Control ........................................................................................... 25 Search ...
ENGLISH 164 164 W arranty (SEA users only) SAMSUNG LIMITED W ARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship.
ENGLISH ELECTRONICS *Samsung Electronics’ Internet Home Page http://www .samsungusa.com AD68-00779B REV .01 THIS CAMCORDER IS MANUF ACTURED BY : SERVICE DIVISION 400 V alley Road, Suite 201, Mt.
Een belangrijk punt na aankoop van elk apparaat Samsung SCD6040 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung SCD6040 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung SCD6040 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung SCD6040 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung SCD6040 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung SCD6040 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung SCD6040 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung SCD6040 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.