Gebruiksaanwijzing /service van het product SHC-730N/P van de fabrikant Samsung
Ga naar pagina of 24
SAMSUNG CCD CAMERA SHC-730N/P HIGH SENSITIVITY COLOR CAMERA INSTRUCTION MANUAL About this manual Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. P/No. : Z6806-0541-01A VAN 04. 12 • SAMSUNG TECHWIN CO.
This installation should be made by a qualified service person and should conform to all local codes. The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert .
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 5 4 Features War ning Fine Picture in Ultra Low illumination. SSNR(Samsung Super Noise Reduction) SHC-730 has powerful DSP that can remove image noise efficiently and it shows clean and obvious image in low luminance.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 7 6 Contents Front Side Bottom Back Lens • Installing Auto Iris Lens • Installing C/CS-Mount Lens Connecting to Monitor Connecting.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 9 8 Precautions Do not install the camera in extreme temperature conditions. Only use the camera under conditions where temperatures are between -10 ˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 11 10 Composition Front C-Mount Lens Adapter Used to attach C-mount lens. Back Focus Adjustment Lever Used to adjust back focal length Name and Function of Each Section Tripod Mounting Bracket Screw Hole Used to fix the Tripod mounting bracket on the top of the camera.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 13 12 Name and Function of Each Section Bottom Tripod Mounting Bracket Tripod Mounting Hole Used to install the camera on an optional tripod. The tripod must be equipped with the screw specified as shown below.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 15 14 LENS The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. 1. Peel approximately 8mm from the end of the lens cable outer cover.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 17 16 Connection Before mounting a lens, please check whether it is a C-mount or CS-mount lens. The back focus is set for the CS-mount lens at the factory. • Mounting a CS-Mount lens After removing the protecting cap, attach the lens into the camera by turning clockwise.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 19 18 Connection Connecting to Monitor Connect the VIDEO Out jack to the monitor VIDEO In jack. • As the connecting method varies with the instruments, refer to the manual supplied with the instrument.
COLOR CCD CAMERA User’s Manual 21 COLOR CCD CAMERA User’s Manual 20 Connection Connecting to Power Configuration of The Menu Operating Y our Camera Each model has different power specification. Please check the name of the model and power specification before connecting to power source.
COLOR CCD CAMERA User’s Manual 23 COLOR CCD CAMERA User’s Manual 22 Operating Y our Camera Setting Up The Menu COLOR CCD CAMERA User’s Manual 23 COLOR CCD CAMERA User’s Manual 22 Use the five Setup Menu buttons on side of the camera. 1. Press the SET button to access the setup mode.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 25 COLOR CCD CAMERA User’s Manual 24 3. Press SET button. 4. You can enter up to 15 characters. Move the cursor to character-enter location by using the LEFT or RIGHT button. Select the desired character by using LEFT, RIGHT,UP or DOWN button.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 27 COLOR CCD CAMERA User’s Manual 26 SV-III DSP chip built-in provides intelligent light level control to overcome the severe Backlight conditions. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘Backlight’ using the UP or DOWN button.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 29 COLOR CCD CAMERA User’s Manual 28 Motion Detection Press SET button. Select the two kinds of ZONE NUMBER(1 or 2), ZONE 1 covers larger area than 2. Turn on ZONE STATE, then MD starts to be activated.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 31 COLOR CCD CAMERA User’s Manual 30 Tips on Using the Motion Detection Feature • After selecting zone and sensitivity, perform a test operation to make sure it works properly. • If the lighting flickers, the motion detection feature might not work properly.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 33 COLOR CCD CAMERA User’s Manual 32 You can control brightness of the screen by the shutter speed. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘Shutter’ using the UP or DOWN button.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 35 COLOR CCD CAMERA User’s Manual 34 • If you press the set button on ‘Auto’ mode. You can adjust brightness by increasing or decreasing the shutter speed. (EX. x2,...., x32, x64, ...., x128) • If you increase the number of shutter speed, moving object gets an more afterimage.
COLOR CCD CAMERA User’s Manual 37 COLOR CCD CAMERA User’s Manual 36 Operating Y our Camera SSNR (Samsung Super Noise Reduction) To reduce the noise on the screen. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SSNR’ using the UP or DOWN button.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 39 COLOR CCD CAMERA User’s Manual 38 PRIVACY: To mask area which you want to mask - OFF: Deactivation - ON: Privacy mode activated · Press the SET button. · 4 AREAS are selectable. Select the area you want(AREA1, AREA2, AREA3, AREA4) · Set AREA STATE ‘ON’ using LEFT or RIGHT button.
COLOR CCD CAMERA User’s Manual 41 COLOR CCD CAMERA User’s Manual 40 1. RS-232C Communication Setting. • Mode : Serial • Data Bit : 8 • Bit/sec : 9600bps • Stop Bit : 2 • Port : Com1 • Parity : None • Flow Control : XON/XOFF 2. Setup menu Command.
COLOR CCD CAMERA User’s Manual 43 COLOR CCD CAMERA User’s Manual 42 Problem Motion Detection function is not active. The color of the picture is not matched. The image on the screen flickers. L/L mode isn’t able to be selected. L/L is not operating properly.
DECLARA TION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO.
MEMO MEMO.
Een belangrijk punt na aankoop van elk apparaat Samsung SHC-730N/P (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung SHC-730N/P heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung SHC-730N/P vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung SHC-730N/P leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung SHC-730N/P krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung SHC-730N/P bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung SHC-730N/P kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung SHC-730N/P . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
