Gebruiksaanwijzing /service van het product SHR-5082 van de fabrikant Samsung
Ga naar pagina of 93
Real Time DVR user manual Thank you for purchasing a Samsung product. To receive a more complete service, p l e a s e register your product at www.samsung.
key features of your DVR The Digital Video Recorder (DVR) compresses the acquired images of 8/16 video channels from cameras using MPEG-4 technologies, and compresses the 4 channel audio inputs into ADPCM audio file in real time to record them on the hard disk or retrieve them from the hard disk simultaneously.
safety regulations Please be sure to keep the following in mind for the right use of the product to prevent proprietary risk or damage. Do not use multiple plugs at once. This may cause abnormal heat generation or fire Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you.
before start This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: SEC retains the copyright on this manual.
contents _01 INTRODUCING YOUR REAL TIME DVR 03 INSTALLATION 08 CONNECTING WITH OTHER DEVICES 12 LIVE 15 MENU SETUP 20 BACKUP PTZ CAMERA CONTROL 36 RECORDING 39 03 Controls on the DVR 05 Rear panel jac.
02 _ contents SEARCH AND PLAY 40 Smart Viewer 44 APPENDIX 68 40 Before use 40 Calendar search 40 Event search 41 Date time search 41 Go to first search 42 Go to last search 42 Backup search 42 Playbac.
01 INTRODUCING introducing _03 CONTROLS ON THE DVR introducing your real time DVR 1. ALARM LED Lights when an event occurs. HDD LED Lights when the hard disk is operating. When the HDD is accessed, LED repeatedly blinks. NETWORK LED Lights when the data is transferred through the network.
04 _ introducing 3. REC Button Starts or ends the recording (Fast/Step Rewind) Button - Step Rewind: Used for backward scene-by-scene search while at pause. - Fast Rewind: Used for quick backward search while in play. (-x2, -x4, -x8, -x16, -x32, -x64) (STOP) Button Ends search while in play.
01 INTRODUCING introducing _05 REAR P ANEL JACKS 5082 REAR 5162 REAR 9 10 11 12 1 2 4 3 5 6 8 7 1 VIDEO OUT Composite video output port (BNC type connector) 2 AUDIO OUT Audio output port (RCA jack) 3 .
06 _ introducing REMOTE CONTROL RECORD Starts or ends the recording. OPEN/CLOSE Used to open and close the DVD-RW tray. 0~9 Selects a single channel while in live mode. Used for inputting numeric values. REC LOCK Locks the record function. AUDIO Toggles Audio On and Off.
01 INTRODUCING introducing _07 REMOTE CONTROL RECORD Starts or ends the recording. OPEN/CLOSE Used to open and close the DVD-RW tray. 0~9 Selects a single channel while in live mode. Used for inputting numeric values. REC LOCK Locks the record function.
Figure 1 One Year: 24HR X 365 DAY =8,760 HR Temperature Unit: ºC Life (Unit: HOURS) Figure 2 08 _ installation installation You should pay attention to the following before you use the product. Do not use it outdoor. Do not place water or liquid near the connection part or the prod uct.
02 INST ALLA TION installation _ 09 CAUTION [Checking HDD Data] Please, pay attention to Following information to minimize the chance of losing HDD data.
BRACKET- HDD(A) BRACKET- HDD(B) BRACKET-HDD(A) SCREW-SPECIAL Screwdriver Screwdriver 10 _ installation 3. There are brackets (Bracket-HDD) mounted on the right and left sides where you can mount HDDs. Remove the screws holding each bracket to mount an HDD onto.
BRACKET-HDD(B) Secondary HDD IDE Connector Primary HDD IDE Connector 02 INST ALLA TION installation _ 11 6. To add another hard disk after adding a hard disk completes, remove the Bracket-HDD(B) on the DVD-RW driver. 7. Fix the hard disk to the Bracket using 4 (B)SCREW-MACHINE (6-32UNC, L4.
CONNECTING THE NETWORK Connecting to Internet through Ethernet (10/100BaseT) 12 _ connecting connecting with other devices The illustrations are described based on SHR-5162.
03 CONNECTING connecting _ 13 Connecting to Internet through ADSL CONNECTING THE USB 1. There are two USB connecting ports on the front and rear panels of the product. 2. USB Hard Disk, USB CD/DVD, and USB Memory can be connected through any of those ports.
14 _ connecting CONNECTING THE RS-485 DEVICE You can connect an RS-485 device through a rear port of the product. For example, you can c onnect and co ntrol PTZ cameras supporting the RS-485 communication. You can also adopt either Half Duplex or Full Duplex method for exchanging data.
CAM_01 CAM_01 V .Loss 04 LIVE live _ 15 live OPERA TING THE SYSTEM Turn on the power and the following Samsung logo appears. Upon completion of initializing procedure, the live screen appears with a beep sound. (It takes about one minute until a live screen comes up.
16 _ live : PTZ icon Thi s icon appe ars wh en se tting the PT Z dev ice and it ch anges to ye llow w hen o perati ng th e PTZ. : Audio icon This icon represents the ON/OFF status of audio and it changes to yellow when the audio is set to ON. It does not appear in Video mode or when the audio is disabled.
04 LIVE live _ 17 Full Screen (Single) mode: Displays the selected channel in full screen. 4, 6, 7, 8, and 9 Split mode: Displays 4, 6, 7, 8, 9 channels in each split screen. You can select channel numbers on your own using the MODE button on the front panel or remote control.
18 _ live Audio On/Off setting in 4, 6, 7, 8, and 9-split modes and PIP mode As in 16-split mode, when pressing the ENTER button in 4, 6, 7, 8, and 9-split modes and PIP mode, the selection cursor appears for you to select a channel. After selecting a channel, you can set the Audio to On or Off using the AUDIO button.
04 LIVE live _ 19 SPOT -OUT MONITORING Spot-out monitoring has nothing to do with the live screen output. It monitors a specific channel in full screen. After selecting Monitoring on the MENU, you can select a channel for monitoring in Spot Out Channel .
MENU MENU SETUP System Camera Monitoring Record Mode Event Record Schedule Backup Network Date/Time/Language Password Load Factory Default System Log Event Log System Information and Setup Storage Set.
Admin Password New Password Confirm Password Lock On Record Lock On User Password User Setup User1 New Password Confirm .
First Prev Next Last Exit No. Event Log List Date/Time 339 Video Loss CH[4] 2007-03-10 10:00:29 338 Video Loss CH[6] 2007-03-10 10:00:29 337 Video Loss CH[7] 2007-03-10 10:00:29 336 Alarm Detection CH.
System Information Software Version B3.07-K1.40-V2.17_0702101326 Broadcast Format NTSC Mac Address 00:00:FO:54:FF:FF OK Cancel System Information and Setup USB S/W Upgrade Version 83.07-K1.40-V2.17C_0703141732 Device Information Device No Used/Total Erase Usage ATA 1 295.
Export the Configurations to USB Memory Mode Export File Name 07011000 Include N/W Settings Cancel Export/Import the Configuration Apply Device None Cancel Remote Control Device OK Remocon On ID:00 ID.
MENU MENU SETUP System Camera Monitoring Record Mode Event Record Schedule Backup Network Camera Configuration PTZ Device Screen Setup Move/Control Select Exit Cancel OK 9-16 Camera Config Cam Video A.
Cancel OK 9-16 PTZ Device Cam ID Protocol Baudrate Parity Data Stop 1 000 n Samsung 38400 None 8 1 2 001 Vic. 38400 None 8 1 3 002 Pan. 19200 None 8 1 4 003 Dia.
MENU Cancel OK Record Quality & Auto Deletion Cam Normal Event Cam Normal Event 1 Level4 Level4 9 Level4 Level4 2 Level4 Level4 10 Level4 Level4 3 Level4 Level4 11 Level4 Level4 4 Level4 Level4 12.
28 _ menu setup Record Quality You can set the recording picture quality selecting of Level8(High) ~ Level1(Low). Auto Deletion If you select On , you can set the number of days for access restriction. If it is set to 3, you cannot search the data recorded at the time less than 3 days before.
05 MENU SETUP menu setup _ 29 EVENT RECORD MODE The detailed list for event mode settings is as follows: Alarm Detection Setup Sensor State - Off: Sensor does not operate. - N.O (Normal Open): Sensor remains open all the time. But if it gets closed, an alarm is issued.
30 _ menu setup Sensitivity This is used to set the sensitivity for motion detection. Available values are Low, Medium, and Very High. Alarm-Out It is used to set the Alarm-Out location when any alarm occurs. Currently 5 Alarm Outs are available.
05 MENU SETUP menu setup _ 31 In case of SHR-5082, only 8 channels are displayed. Alarm Out Schedule You can schedule the automatic output for alarms. The scheduling is enabled by selecting alarms, days and time blocks. The default setting is Event Driven.
32 _ menu setup IP Set the IP address for the main body of the product for connecting to the network. If the connection mode is set to Static IP, type the IP address. If the connection mode is Dynamic IP or ADSL(PPPoE), the IP address allocated by the DHCP server or ADSL company automatically appears.
If you set up the public DDNS (dyndns. c om, no-ip .com, or cha ngeip.c om), i t will take approximately 30 to 60 seconds to get the IP address for the host name (URL) to be updated in the DNS. To connect this product to an IP router, you have to designate a port for this product in the setup menu of the router.
34 _ menu setup CONFIGURING NETWORK Port configuration for connecting Smart Viewer To set the TCP port for DVR registration into Smart Viewer, the value should be the same as that of this product. To use the IP router, you must forward the activated ports.
backup _ 35 06 BACKUP If there is a predefined device connected, the window displays the device information like the free space and such. You can also use the BACKUP button on the front of your DVR. T o configur e the related settings 1. Set the start date and time using the Direction buttons and the ENTER button.
36 _ PTZ camera control PTZ CAMERA CONTROL MODE You have to check that proper PTZ camera settings are allocated for PTZ device setup in the Camera menu. In case of SHR-5082, only 8 channels are displayed. W hen the PTZ c onfiguration is complete, th e PTZ sign ( PTZ ) appears on the live screen.
PTZ camera control _ 37 07 PTZ camera control PAN Use the LEFT/RIGHT buttons on the front panel or remote control in PTZ Camera Control Mode to control the camera horizontally. TILT Use the UP/DOWN buttons on the front panel o r remote control in PTZ Came ra Control Mode to control the camera vertically.
38 _ PTZ camera control PRESET VIEW The preset setup allows you to move to a preset position using the PTZ camera. Press the VIEW button on the front panel or remote control in Single Screen PTZ Camera Control Mode to select Preset .
recor ding _ 39 08 RECORDING REC (NORMAL RECORDING) Pressing the RECORD button starts recording as set in the Record Mode. Then the REC LED lights and the Recording icon appears on the screen. While recording on HDD is in progress, the HDD LED blinks.
search & play _ 41 40 _ search & play 09 SEARCH & PLA Y search & play _ 41 40 _ search & play 09 SEARCH & PLA Y BEFORE USE When you press the SEARCH button, the Search window appears after user validation checkup.
search & play _ 41 40 _ search & play 09 SEARCH & PLA Y search & play _ 41 40 _ search & play 09 SEARCH & PLA Y T o perform an event sear ch 1. Use the UP/DOWN direction buttons to place the cursor to the wanted channel and press the ENTER button.
search & play _ 43 42 _ search & play 09 SEARCH & PLA Y search & play _ 43 42 _ search & play 09 SEARCH & PLA Y GO TO LAST SEARCH In case of SHR-5082, only 8 channels are displayed. T o perform this function 1. Use the UP/DOWN direction buttons to place the cursor to the wanted camera and press the ENTER button.
search & play _ 43 42 _ search & play 09 SEARCH & PLA Y search & play _ 43 42 _ search & play 09 SEARCH & PLA Y Playback mode You can change the screen display method using the MODE button and NUMERIC buttons as shown in the figure.
44 _ Smart Viewer INTRODUCTION Smart Viewer is a program to be installed on your PC. Using this program, you can monitor the video and audio data in real time through the network environment without accessing the site where the product is installed. MAIN FEA TURES MPEG-4 Video Compression: It provides good video quality.
Smart Viewer _45 10 Smart Viewer 5. After reading the license agreement, click Yes to proceed to next step. 6. Set the destination folder to install the Smart Viewer program and click Next . 7. The installation process proceeds with setup file installation and system setup.
46 _ Smart Viewer Smart Viewer INITIAL SCREEN 1 2 3 4 6 11 14 13 12 8 9 5 7 10 1. This screen shows the monitoring sites. 2. Using these buttons, you can enter the Search mode in which you can search and play the remote video file that has been recorded on your DVR and enter the Monitoring mode for real-time monitoring.
Smart Viewer _47 10 Smart Viewer 1. These buttons enable you to select setup items for DVR Setup, Viewer Setup, Site Setup, and S/W Version. 2. In this box, you can set the details on each setup item. 3. Using this button, you can exit from the current window.
48 _ Smart Viewer For more details, see Chapter 5, “Menu Setup.” - Admin Password You can change the Admin password related settings for control of DVR. - User Password You can change the user password related settings for control of DVR. CAUTION For the system password, you can input numeric values only up to 8 digits.
Smart Viewer _49 10 Smart Viewer - Storage Setup It displays the information of the HDD that is contained in your DVR. Also you can d etermine whether or not to repeat recording and make a beep sound when any disk failure happens. - Remote Control Device You can configure the settings for the remote control that is installed in the DVR system.
50 _ Smart Viewer The Delete key and key combinations like CTRL+C and CTRL+V in the keyboard are not supported for input of camera title. For deletion of any input value, use the BACKSPACE key. - PTZ Device You can configure the settings for PTZ cameras, which include camera ID, protocol, baud rate, parity, data bit, and stop bit.
Smart Viewer _51 10 Smart Viewer - Alarm Detection Setup It configures the settings for alarm recording. More than one camera should be selected to apply the alarm. - Motion Detection Setup It configures the settings for recording through motion detection.
52 _ Smart Viewer Network Y ou can configu re the network-related sett ings. For more d etails, see Chapte r 5, “Menu Setup.” - Network Password You can set both Admin password and user password for connecting to the DVR system through the network using Smart Viewer.
Smart Viewer _53 10 Smart Viewer Viewer Setup Click Viewer Setup for configuring the Smart Viewer related settings. This Viewer Setup consists of 5 different items: Video Recording, File Converting, Sequence Time, OSD Display, and Auto Connection. 1 2 3 5 4 6 8 7 1.
54 _ Smart Viewer Language You can set the language to be displayed on Smart Viewer. Site Setup Click Site Setup for configuring the site-related settings. Smart Viewer connects to the DVR or site that has been registered here. A site can have multiple DVRs.
Smart Viewer _55 10 Smart Viewer If you have selected Use DDNS in the Network Settings menu of DVR or used an IP splitter to register a URL using DDNS, you can connect through the designated URL. I f you want to connect through the URL, select URL in Address Type and enter the URL set in URL .
56 _ Smart Viewer The site name can be input in both English and Korean up to maximum 10 letters. To delete an existing site or DVR, use Delete . After selecting a site or DVR and click Delete , the following message appears. Click OK to confirm it. After this action, the DVR name is deleted but the information of DVR is not removed.
Smart Viewer _57 10 Smart Viewer If a DVR is not connected to Smart Viewer, it is displayed in gray and “Not Connected” appears in the Status column. For software upgrade, click the following button to open the DVR firmware file. 5162/5082 5162/5082 After selecting a firmware file, click Open and select Upgrade .
58 _ Smart Viewer If the network password of a DVR differs from the connection password set in Smart Viewer, a login message appears to let you input the correct password manually.
Smart Viewer _59 10 Smart Viewer 3. When audio signal is available, the audio mark appears. 4. It displays whether the PTZ controls are active. 5. The current channel alarm status is displayed. 6. The name and IP address of the connected DVR are displayed.
60 _ Smart Viewer Camera Connection Indication Window The window displays the connection state of DVR and the connected cameras. Yellow: When Smart Viewer is successfully connected to a DVR. When the camera is connected for monitoring. Black: When Smart Viewer cannot be connected to a DVR.
Smart Viewer _61 10 Smart Viewer NEXT Button When this button is clicked, next screen follows. In Single Mode, the channel numbers are sequentially switched from 1 to 16.
62 _ Smart Viewer Audio V olume Control Button You can adjust the audio volume level (0 to 10) of a channel or mute it. Video Brightness/Contrast Contr ol Button After selecting a channel, you can adjust the brightness and contrast levels (0 to 10) of video image using the control buttons (+,-).
Smart Viewer _63 10 Smart Viewer The preset function is supported by all cameras. You can set up to 20 presets. But an active directory (AD) protocol camera can have 7 presets. The names of 2 , 3 , and 4 may vary depending on the camera vendor. And those functions may not be supported by some product.
64 _ Smart Viewer 1. The screen shows the playback channels. 2. Click this to move to the Search mode for searching and playing the video files recorded. 3. Click this to move to the Remote mode for playing back the recorded DVR video images remotely.
Smart Viewer _65 10 Smart Viewer Remote Mode This mode transfers the video data recorded on DVR through the network for playback. Up to 4 channels are allowed for simultaneous search and playback. The video data is played at the position where the time bar is located.
66 _ Smart Viewer 2. File Conversion button When this button is clicked, the system converts a DVR file into JPEG or AVI format. To perform this function a. Click Open to select a DVR file to be converted. b. Select JPEG Frame or AVI Video. c. Click Start to convert the file.
Smart Viewer _67 10 Smart Viewer 6. Time Line It displays the recorded video data status on DVR after a date is selected. The normal mode displays the time ranging from 0 to 24 O’clock while the extension mode displays the time every 2 hours.
68 _ appendix appendix PRODUCT SPECIFICA TION Specs Details Notes Operating System Embedded OS Broadcasting NTSC / PAL System Input Voltage AC 100 ~ 230V (PAL) AC 110 ~ 220V (NTSC) Power Usage 60W Video Video Input Composite 16(8) Channel - 1.
11 APPENDIX appendix _ 69 Specs Details Notes Recording Compression Method Video : MPEG4 Audio : ADPCM Resolution & Recording Specs Resolution Recording Specs (Picture quality) Highest Image Recor.
70 _ appendix Specs Details Notes Display Mode Single 1Channel Decoding 16 split (played cameras10-16) 9 split (played cameras 5-9) 4 split (played cameras 2-4) PIP 1 Channel Decoding + 1Chann.
11 APPENDIX appendix _ 71 OUTLINE DRA WINGS 5082 Outline Drawings SHR-5162_Eng.indb 71 2007-06-18 ｿﾀﾀ・11:50:31.
72 _ appendix 5162 Outline Drawings SHR-5162_Eng.indb 72 2007-06-18 ｿﾀﾀ・11:50:38.
11 APPENDIX appendix _ 73 F ACTOR Y DEF AUL T This returns the factory default settings. The settings are made as follows; Use System/Load Factory Default in MENU In Live mode, press and hold down MODE and then PTZ on the fro nt panel for 6 seconds to reset the settings.
74 _ appendix Classification Detailed Items Factory Setup Monitoring Event Monitoring Duration Off Date On Time On Title On Status On Spot Out Channel CH1 Spot Out Event Monitor Off Monitor Out Dual O.
11 APPENDIX appendix _ 75 Classification Detailed Items Factory Setup Network IP Settings Connection Mode Static IP Bandwidth 2Mbps Admin Password 4321 User Password 4321 IP 192.168.001.200 Gateway 192.168.001.001 Subnet Mask 255.255.255.000 DNS 168.126.
76 _ appendix TROUBLESHOOTING (F AQ) PROBLEM SOLUTION The system power is dead and LEDs on the front of the set do not operate at all. Please check the power connection. Check the power voltage. I f all your e fforts as above end up wi th nothing, check or exchange the power supply.
11 APPENDIX appendix _ 77 PROBLEM SOLUTION Alarms keep continuously issued so you cannot cancel using the ALARM button. Press the MENU button and do the following: 1) To cancel Event Monitoring: Monitoring > Event Monitoring Duration Off 2) To cancel Buzzer: Event Record > Alarm (Motion Detection/Video Loss) > Alarm-Out .
78 _ appendix PROBLEM SOLUTION The Audio icon of Smart Viewer is left deactivated in Live mode. Setting Audio to On in the Camera menu of your DVR will make no difference. If your PC has no Audio driver or has some problem with Audio play by an Audio driver, the Audio icon will be deactivated.
11 APPENDIX appendix _ 79 OPEN SOURCE LICENSE REPORT ON THE PRODUCT This product uses software provided under the name of GPL and LGPL. You can receive the following GPL and LGPL source codes by email request to www.
80 _ appendix constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.
11 APPENDIX appendix _ 81 otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
82 _ appendix REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBU TE THE PROG.
11 APPENDIX appendix _ 83 and change free software to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software p ackag es--typical ly librarie s--of the F ree Software Foundation and other authors who decide to use it.
84 _ appendix a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public L icense (also called “this L icense”).
11 APPENDIX appendix _ 85 of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code.
86 _ appendix executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.
11 APPENDIX appendix _ 87 Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission.
88 _ appendix OpenSSL LICENSE * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1.
11 APPENDIX appendix _ 89 * “This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)” * The word ‘cryptographic’ can be left out if the rouines from the library * being used are not cryptographic related :-). * 4.
Een belangrijk punt na aankoop van elk apparaat Samsung SHR-5082 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung SHR-5082 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung SHR-5082 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung SHR-5082 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung SHR-5082 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung SHR-5082 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung SHR-5082 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung SHR-5082 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
