Gebruiksaanwijzing /service van het product SNO-5080R van de fabrikant Samsung
Ga naar pagina of 94
NETWORK CAMERA User Manual SNO-5080R.
Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company.
English _3 ● OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
overview 4_ overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.
English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location.
overview 6_ overview Please read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near conductive material.
English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Features 9 Recomended PC Specifications 10 What’s Included 11 At a Glance INSTALLATION & CONNECTION 13 13 To.
overview 8_ overview SETUP SCREEN 34 34 Setup 34 Video Setup 42 Network Setup 48 Event Setup 55 System Setup APPENDIX 60 60 Specification 64 Product Overview 66 Troubleshooting 68 Open Source Announce.
English _9 ● OVERVIEW PRODUCT FEATURES HD Video Quality Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. M However, MPEG-4 video can not be played on a web page. Use CMS software if you want to play the video on a web page.
overview 10_ overview WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description User Manual, Installer S/W DVD, C.
English _11 ● OVERVIEW AT A GLANCE Front Side Item Description Sunshield It protects the camera from the direct sunlight. b Sunshield Hold It fixes the sunshield with the camera. c Video Output Port Connected to the monitor so that you can check the video from the camera.
overview 12_ overview Rear Side Item Description Power Port Used to plug the power cable. b Network Port Used to connect a PoE or LAN cable. c I/O Port ARM-OUT WHITE : Used to connect the alarm output signal. ARM-IN BLUE : Used to connect the alarm input signal.
English _13 ● INSTALLATION & CONNECTION TO ADJUST THE ZOOM FACTOR OR FOCUS Loosen the front cover as shown. Loosen the zoom/focus lever slightly. Position the zoom/focus lever to WIDE (NEAR) or TELE (FAR) as appropriate. Then, tighten the zoom/focus lever to fix the adjusted position.
installation & connection 14_ installation & connection CONNECTING WITH OTHER DEVICE Connecting to the monitor Use the test monitor cable to connect the video output port of the camera with the video input port of the monitor.
English _15 ● INSTALLATION & CONNECTION Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera.
16_ network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN Launch an Internet browser on the local PC.
English _17 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM Use the cross LAN cable to connect the network cable directly to your PC. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.
18_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM Use the cross LAN cable to connect the network cable directly to your PC. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.
English _19 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops.
20_ network connection and setup network connection and setup BUTTONS USED IN IP INSTALLER Item Description Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search.
English _21 ● NETWORK CONNECTION AND SETUP Item Description URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed. IPv4 Scans for cameras with the IPv4 setting.
22_ network connection and setup network connection and setup In the < Address > pane, provide the necessary information. MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually.
English _23 ● NETWORK CONNECTION AND SETUP Click [ OK ]. Manual network setup will be completed. When the manual setup including IP is completed, the camera will restart. If the Broadband Router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other.
24_ network connection and setup network connection and setup Enter the password. This is the login password for the “ admin ” user who accesses the camera.
English _25 ● NETWORK CONNECTION AND SETUP PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it.
26_ network connection and setup network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera.
English _27 ● NETWORK CONNECTION AND SETUP CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC Run the IP Installer. It will scan for connected cameras and display them as a list. Double-click a camera to access. The Internet browser starts and connects to the camera.
28_ web viewer web viewer CONNECTING TO THE CAMERA Normally, you would Launch the Internet browser. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100 http://192.168.1.100 - the Login dialog should appear.
English _29 ● WEB VIEWER To check the DDNS address If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server.
30_ web viewer web viewer This network camera uses Microsoft Silverlight for displaying the video. INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer.
English _31 ● WEB VIEWER When done, click < Close >. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen.
32_ web viewer web viewer USING THE LIVE SCREEN Item Description Monitoring Move to the monitoring screen. b Setup Move to the Setup screen. c Viewer Screen Displays the Live video on the screen. Alarm Output Activate the Alarm Out port. Hide the alarm indicator Hides the alarm indicator near the border of the viewer screen.
English _33 ● WEB VIEWER Item Description Capture Saves the snapshot as an image file in the .bmp format. Video Format You can select a profile type in < Video profile > under the < Video > setup menu. If the “Invalid codec” message is displayed, select a profile type from the profile list again.
setup screen 34_ setup screen SETUP You can configure the video, network, event and system settings of the camera via the network. In the Live screen, click [ Setup ( ) ]. The Setup screen appears. VIDEO SETUP Video profile From the Setup menu, select the < Video ( ) > tab.
English _35 ● SETUP SCREEN To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. Select a profile number. Provide the name and select a codec. Specify the conditions under which the codec will be applied.
setup screen 36_ setup screen Video setup From the Setup menu, select the < Video ( ) > tab. Click < Video setup >. Select a < Video source > mode. Flip mode : Turn upside down the image that is captured by the camera. Mirror mode : Flip horizontal the image that is captured by the camera.
English _37 ● SETUP SCREEN Camera setup You can change the camera settings according to the environment where the camera is located. From the Setup menu, select the < Video ( ) > tab.
setup screen 38_ setup screen Manual : You can adjust the red and blue gains of the camera video manually. AWC : Corrects the colors of the camera video to be optimized to the current lighting condition and screen mode. You may need readjustment if the lighting condition is changed.
English _39 ● SETUP SCREEN At night operation, this function will be activated only if the incoming highlight exceeds a certain area in a low contrast environment. At night, HLC will not function if the scene is either too bright or too dark. The backlight function is not available while in IR mode.
setup screen 40_ setup screen Special Setup Select < Special >. Select each item and set it properly. Day & night : You can switch the mode to adjust the black and white level as well as the colors. Color : Always displays the video in colors.
English _41 ● SETUP SCREEN OSD Setup Select < OSD >. Select each item and set it properly. Camera title : Use alphanumeric characters in the list and enter a desired title in the bottom input line. You can enter up to 15 characters for the title.
setup screen 42_ setup screen NETWORK SETUP Interface From the Setup menu, select the < Network ( ) > tab. Click < Interface >. Set the < Interface > and < IPv6 setup > as necessary. IP type : Select an IP connection type. Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
English _43 ● SETUP SCREEN Port From the Setup menu, select the < Network ( ) > tab. Click < Port >. Type in each item in the Port menu as necessary. Neither the port range between 0 and 1023 nor port 3702 is available. HTTP port : HTTP port used to access the camera via the web browser.
setup screen 44_ setup screen DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. From the Setup menu, select the < Network ( ) > tab.
English _45 ● SETUP SCREEN From the top menu bar, select < DDNS SERVICE > - < MY DDNS >. Click [ PRODUCT REGISTRATION ]. Enter the product domain. You must perform the duplicate check for the domain that you entered. Select a < CLASSIFICATION > and specify the < MODEL NUMBER >.
setup screen 46_ setup screen Configuring public DDNS in Camera Settings Open the DDNS settings page and select < Public DDNS > for < DDNS >. Enter the corresponding site’s host name, user name and password. Click [ Apply ( ) ] button. If the connection properly establishes, < (Success) > appears.
English _47 ● SETUP SCREEN SSL You can select a secure connection system or install the public certificate for this purpose. From the Setup menu, select the < Network ( ) > tab.
setup screen 48_ setup screen EVENT SETUP FTP / E-mail You can configure the FTP/E-mail server settings so that you can transfer the images stored in the camera to your PC if an event occurs. From the Setup menu, select the < Event ( ) > tab. Click < FTP / E-mail >.
English _49 ● SETUP SCREEN Sender : Enter the address of the email sender. If the sender address is incorrect, the email from the sender may be classified as SPAM by the email server and thus may not be sent. Subject : Enter a subject for your email.
setup screen 50_ setup screen Video analysis From the Setup menu, select the < Event ( ) > tab. Click < Video analysis >. To set the Motion Detection Select a motion detection mode. Specify the use of motion detection. Select a sensitivity level of the motion detection.
English _51 ● SETUP SCREEN To set the Intelligent Video Analysis Select an Intelligent Video Analysis mode. Set whether to use the Intelligent Video Analysis function. Specify the event rules. You can set a total of 3 rules including the virtual line and the specified area.
setup screen 52_ setup screen Two or more objects overlap or one object divides in multiple portions. Too fast object (for a proper detection, one object should be found overlapping between contiguous frames). Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp.
English _53 ● SETUP SCREEN Select a desired < Defined Area Based Rules >. You can specify up to 3 defined area event rules. Entering : An event where a moving object passes through the defined area and enters inside will be detected. Exiting : An event where a moving object passes through the defined area and exits outside will be detected.
setup screen 54_ setup screen Time schedule You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event. From the Setup menu, select the < Event ( ) > tab. Click < Time schedule >. To set the timer event Set < Timer event setup > to < Enable >.
English _55 ● SETUP SCREEN SYSTEM SETUP Product information From the Setup menu, select the < System ( ) > tab. Click < Product information >. Check the camera information, or provide details according to your network environment. Device name : Provide a device name that will be displayed on the Live screen.
setup screen 56_ setup screen System time setup : Specify the time and date that will be applied to your system. Manual : Specify the time manually. Synchronize with NTP server : Sync with the time of the specified server address. Synchronize with PC viewer : Synchronize the time with the connected PC.
English _57 ● SETUP SCREEN Upgrade / Reboot From the Setup menu, select the < System ( ) > tab. Click < Upgrade / Reboot >. Select a desired item and set it appropriately. Upgrade : Performs upgrading the system. Factory default : Resets the system to the factory default.
setup screen 58_ setup screen To save the current settings and restore the backup settings Click [ Backup ]. The Save As dialog should appear. Specify the backup path with a proper file name, and click [ Save ]. The backup file will be saved to the specified path in the format of “ .
English _59 ● SETUP SCREEN Log You can check the system log or event log. From the Setup menu, select the < System ( ) > tab. Click < Log >. Select a log type. Syslog : You can check the system logs where any system changes are recorded including the time information.
appendix 60_ appendix appendix SPECIFICATION Items Description Video Imaging Device 1/3" 1.3M PS CMOS Total Pixels 1,384(H) x 1,076(V) Effective Pixels 1,329(H) x 1,049(V) Scanning System Progressive Min. Illumination Color : 0.3 Lux (F1.2, 50IRE), 0.
English _61 ● APPENDIX Items Description Operational IR LED 31 ea Viewable Length 30m Camera Title Off / On (Displayed up to 15 characters) Day & Night Auto (ICR) / Color / B/W Backlight Compens.
appendix 62_ appendix Items Description Network Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264, MPEG-4, MJPEG Resolution 1280x1024, 1280x720P(HD), 1024x768, 800x600, 640x480, 320x240 Max. Framerate 22fps (1280x1024), 30fps (720P HD) Video Quality Adjustment H.
English _63 ● APPENDIX Items Description Network Memory Slot - ONVIF Conformance Yes Webpage Language English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, .
appendix 64_ appendix PRODUCT OVERVIEW 246.8 216 262.8 Ø86 Ø77.
English _65 ● APPENDIX 316.8 332.8 86 86.1.
appendix 66_ appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. Check to make sure that the camera’s Network settings are appropriate.
English _67 ● APPENDIX PROBLEM SOLUTION No JPEG file is transferred via e-mail on occurrence of intelligent video analysis event of camera even when the <IV analysis function> is set to <Enable>. Verify the settings in the following sequence: A.
OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate source code covered under the BSD license as follows. Component Name License License URL lighttpd 1.4.25 librtp 1.20 BSD 2.0 BSD 1.0 http://www.opensource.org/licenses/bsd-license.
Copyright (c) 1998-2001 University College London All rights reserved. Redistribution and use in source and binary forms, with or without modifi cation, is permitted provided that the following conditions are met : 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
GPL/LGPL SOFTWARE LICENSE The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.
original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary.
based on the Program is not required to print an announcement.) These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from the Program, an.
However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
WARRANTY ; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program ; if not, write to the Free Software Foundation, Inc.
or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others.
An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, an.
3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfi lling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.
model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium cust.
or installed by the recipient, or for the User Product in which it has been modifi ed or installed. Access to a network may be denied when the modifi cation itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network.
or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.
work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such.
USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the fi rst released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.
Public License therefore permits such linking only if the entire combination fi ts its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.
is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.
it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine readable “ work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modifi ed executable containing the modifi ed Library.
it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc.
Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@ cryptsoft. com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft. com). The implementation was written so as to conform with Netscapes SSL.
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc.
Een belangrijk punt na aankoop van elk apparaat Samsung SNO-5080R (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung SNO-5080R heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung SNO-5080R vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung SNO-5080R leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung SNO-5080R krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung SNO-5080R bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung SNO-5080R kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung SNO-5080R . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
