Gebruiksaanwijzing /service van het product SNV-6084R van de fabrikant Samsung
Ga naar pagina of 166
NETWORK CAMERA User Manual SND-6084R/ SNO-6084R/SNV-6084R.
Copyright ©2013 Samsung T echwin Co., Ltd. All rights reserved. T rademark is the r egis tere d log o of Sa msung Tech win C o., Ltd . The n ame of t his pr oduc t is th e regi ster ed tra dema rk of S ams ung Techw in Co., L td. Oth er tr adem ark s ment ione d in thi s manu al are t he regi ster ed tr adem ark of t heir r espe cti ve co mpany.
English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions.
over view 4_ overview W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.
English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
over view 6_ overview Please read the following recommended safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to dir ect sunlight, near heating equipment or heavy cold area.
English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Featur es 11 Recommended PC Specifications 12 Recommended Micro SD/ SDHC/SDXC Memory Card Specifications 12 What.
over view 8_ overview SETUP SCREEN 81 81 Setup 81 Video & Audio Setup 96 Network Setup 107 Event Setup 123 System Setup APPENDIX 130 130 Specification 135 Product Overview 138 T roubleshooting 140.
English _9 ● OVERVIEW PRODUCT FEA TURES • Dustpr oof/Waterpr oof (IP66) (SNO-6084R/SNV -6084R) The dustproof and waterpr oof design makes you feel at ease when installing the product outdoors or exposing it to rain.
over view 10_ overview • Alarm If an event occurs, the event-related video will be transferr ed to the FTP/email specified by the user or saved to the Micro SD memory , or the event signal will be sent to the Alarm Out port. • Built-in SD Memory (SNO-6084R) This product is equipped with an internal 4GB memory card (SDHC).
English _11 ● OVERVIEW RECOMMENDED PC SPECIFICA TIONS • CPU : Intel Core 2 Duo 2.4 GHz or higher (for using 1920x1080 30 fps) Intel Core i7 2.8 GHz or higher (for using 1920x1080 60 fps) ` Web Plug-in is optimized to SSE 4.
over view 12_ overview RECOMMENDED MICRO SD/SDHC/SDXC MEMOR Y CARD SPECIFICA TIONS • 4GB ~ 64GB • For your camera, we recommend you use a memory car d from the following manufacturers: Micro SD/SD.
English _13 ● OVERVIEW Appearance Item Name Quantity Description Model Name Quick Guide (Optional) 1 SND-6084R/ SNO-6084R/ SNV-6084R Warranty card (Optional) 1 SND-6084R/ SNO-6084R/ SNV-6084R Cable .
over view 14_ overview Appearance Item Name Quantity Description Model Name Sunshield 1 It protects the camera from the direct sunlight. SNO-6084R Sunshield Hold 1 It fixes the sunshield with the camera. SNO-6084R CAUTION: Be w are of the Rated Voltage and Po larit y of the power connec tion.
English _15 ● OVERVIEW A T A GLANCE (SND-6084R) Appearance Item Description a Dome cover Case cover used to protect the lens and the main unit. b Camera Case Housing part that covers the camera body.
over view 16_ overview Components a b cd i f g h e k l m n j.
English _17 ● OVERVIEW Item Description a Internal Cover It is a cover to protect the main body. b Illumination Sensor Detects incoming light to control the IR LED. c Lens Lens for the camera. d IR LED These infrared LED’s are controlled by the illumination sensor.
over view 18_ overview Item Description j Micro SD Memory Card Compartment Compartment for the Micro SD memory card. k Audio Out Jack Used to connect to speakers. l Audio In Jack Used to connect to a microphone. m Network Port Used to connect the PoE or Ethernet cable for network connection.
English _19 ● OVERVIEW A T A GLANCE (SNO-6084R) Appearance Item Description a Sunshield It protects the camera from the direct sunlight. b Sunshield Hold It fixes the sunshield with the camera. c Reset Button The button restores all camera settings to the factory default.
over view 20_ overview Item Description d Zoom/Focus Control Button T Zoom in (Tele) W Zoom out (Wide) N Focusing on a near object (Near) F Focusing on a far object (Far) Focus Control Press this button for automatic focus control. e Test Monitor Out Output port for test monitoring the video output.
English _21 ● OVERVIEW Components Item Description a Power Port Used to plug the power cable. b Alarm I/O Port ARM-IN Used to connect the alarm input sensor or external day/ night sensor. GND Common port for alarm output signal. ARM-OUT Used to connect the alarm output signal.
over view 22_ overview Item Description d Audio Out Jack Used to connect to speakers. e Audio In Jack Used to connect to a microphone. f IR LED These infrared LED’s are controlled by the illumination sensor. g Illumination Sensor Detects incoming light to control the IR LED.
English _23 ● OVERVIEW A T A GLANCE (SNV -6084R) Appearance Item Description a Dome cover Case cover used to protect the lens and the main unit. b Camera Case Housing part that covers the camera body.
over view 24_ overview Components AC 24V / DC 12V RESET VID EO F W AF T N + - b d c e fg h i k j a.
English _25 ● OVERVIEW Item Description a Internal Cover It is a cover to protect the main body. b Illumination Sensor Detects incoming light to control the IR LED. c Lens Lens for the camera. d IR LED These infrared LED’s are controlled by the illumination sensor.
26_ installation & connection installation & connection Precautions befor e installation Ensure you read out the following instructions before installing the camera: • It must be installed on the ar ea (ceiling or wall) that can withstand 5 times the weight of the camera including the installation bracket.
English _27 ● INST ALLA TION & CONNECTION Installation 1. Attach the installation template to the selected area and punch 3 holes as shown in the figure. 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. ` Set the < FRONT TOP > mark imprinted on the camera to face the direction of camera monitoring.
installation & connection 28_ installation & connection INST ALLA TION (SNO-6084R) J ` This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.
English _29 ● INST ALLA TION & CONNECTION INST ALLA TION (SNV -6084R) J ` This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.
installation & connection 30_ installation & connection Installation 1. Drill a hole (diameter : 6mm, depth : min 55mm) of the case bottom and insert the provided plastic anchor to the end. 2. Fit the bottom hole to the anchor hole and insert and fix the taping screw (M4.
English _31 ● INST ALLA TION & CONNECTION Connecting waterproof power cable and LAN cable If the LAN cable is not connected indoors 1. Remove the dome cover and the case. 2. Pull out the long projected part of the rubber plug on the bottom and remove it as shown in the figur e.
installation & connection 32_ installation & connection 5. Insert the LAN cable into the large hole made by removing the pr ojected part of the rubber plug in step 2 above. 6. Remove the sheath with a cable cutter , and align the cables. 7. Connect the LAN cable with a LAN connector , and insert it into the LAN tool.
English _33 ● INST ALLA TION & CONNECTION Connecting alarm cable 1. Remove the dome cover and the case. 2. Pull out the rubber plug on the bottom as shown in the figure. 3. Insert the alarm cable into the hole made by removing the rubber plug in step 2, and connect the cable with the PCB alarm terminal.
installation & connection 34_ installation & connection Attaching to the unbundled adapter Choose and purchase a necessary one of the following options (unbundled) that is suitable to the installation site or for your convenience. 1. Remove the dome cover from the case by r eferring to the “ Disassembling ” section.
English _35 ● INST ALLA TION & CONNECTION Optional Accessories for Installation For your easier installation, you can purchase appropriate optional accessories available.
installation & connection 36_ installation & connection 3. POLE MOUNT ADAPTOR(SBP-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on a pole whose diameter is bigger than 80mm.
English _37 ● INST ALLA TION & CONNECTION Adjusting the monitoring direction for the camera (SND-6084R/ SNV -6084R) ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling.
installation & connection 38_ installation & connection INSERTING/REMOVING A MICRO SD MEMOR Y CARD (SND-6084R/SNV -6084R) J ` Disconnect the power cable from the camera before inserting the Micro SD memory card. ` Do not insert the Micro SD memory card while it’ s upside down by force.
English _39 ● INST ALLA TION & CONNECTION Removing a Micro SD Memory Car d Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. J ` Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released.
installation & connection 40_ installation & connection MEMOR Y CARD INFORMA TION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices.
English _41 ● INST ALLA TION & CONNECTION CONNECTING WITH OTHER DEVICE Monitor to install Power Ethernet <SND-6084R> Ethernet Power ARM-IN GND ARM-OUT CAUTION : Be ware of the Rated Voltage and Polarity of the power connection.
installation & connection 42_ installation & connection J ` The CVBS out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes.
English _43 ● INST ALLA TION & CONNECTION Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply (SND-6084R) Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera.
installation & connection 44_ installation & connection Power Cable Specification for Each Model In case of DC 12V Input: Wire Type (AWG) #22 #20 #18 Cable Length (Max.) SND-6084R 24m 38m 60m SNO-6084R SNV-6084R In case of AC 24V Input: Wire Type (AWG) #22 #20 #18 Cable Length (Max.
English _45 ● INST ALLA TION & CONNECTION Connecting to Audio Input/Output ARM-IN GND ARM-OUT CAUTION : Be ware of the Rated Voltage and Polarity of the power connection.
installation & connection 46_ installation & connection 1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the microphone is connected to. M ` As a microphone is built in, you can use the built-in microphone instead of an external one.
English _47 ● INST ALLA TION & CONNECTION Connecting to the I/O port box Connect the Alarm I/O cable to the corresponding port of the port box. <SND-6084R> Sensor Alarm (Warning lamp) ARM-IN GND ARM-OUT ARM-IN GND ARM-OUT CAUTION : Be ware of the Rated Voltage and Polarity of the power connection.
installation & connection 48_ installation & connection • ALARM-IN : Used to connect the alarm input sensor or external day/night sensor . • ALARM-OUT : Used to connect the alarm output signal. • GND : Common port for alarm output signal J ` If devices (e.
English _49 ● INST ALLA TION & CONNECTION T o connect the exter nal sensor Connect one strand of each signal line (2-strand) of the sensors to the [ ALARM IN ] port, and connect the other strand to the [ GND ] port. Alarm In Wiring Diagram T o connect the alarm out If devices (e.
50_ network connection and setup network connection and setup Y ou can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTL Y TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1.
English _51 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTL Y TO A DHCP BASED DSL/CABLE MODEM 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.
52_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTL Y TO A PPPoE MODEM 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.
English _53 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops.
54_ network connection and setup network connection and setup BUTTONS USED IN IP INST ALLER Item Description a Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search.
English _55 ● NETWORK CONNECTION AND SETUP Item Description g URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed. h IPv4 Scans for cameras with the IPv4 setting.
56_ network connection and setup network connection and setup 3. In the < Address > pane, pr ovide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requir es no user setting.
English _57 ● NETWORK CONNECTION AND SETUP If using a Broadband Router • IP Addr ess : Enter an address falling in the IP range provided by the Br oadband Router . ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The < Subnet Mask > of the Broadband Router will be the < Subnet Mask > of the camera.
58_ network connection and setup network connection and setup Auto Network Setup Run < IP Installer_v2.XX.exe > to display the camera search list.
English _59 ● NETWORK CONNECTION AND SETUP DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP envir onment - If a Broadband Router , with cameras connected, is assigned an I.
60_ network connection and setup network connection and setup PORT RANGE FOR W ARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it.
English _61 ● NETWORK CONNECTION AND SETUP Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera.
62_ network connection and setup network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer . It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera.
English _63 ● WEB VIEWER web viewer CONNECTING TO THE CAMERA Normally , you would 1. Launch the Internet browser . 2. T ype the IP addr ess of the camera in the address bar . ex) • IP address (IPv4) : 192.168.1.100 http://192.168.1.100 - the Login dialog should appear .
64_ web viewer web viewer Connecting via UPnP 1. Run the client or operating system in support of the UPnP protocol. 2. Click the camera name for search. In the Windows operating system, click the camera name searched fr om the network menu. - The login window is displayed.
English _65 ● WEB VIEWER LOGIN Whenever you access the camera, the login window appears. Enter the User ID and password to access the camera. 1. Enter “ admin ” in the < User name > input box. The administrator ID, “ admin ”, is fixed and can not be changed.
66_ web viewer web viewer INST ALLING SIL VERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer.
English _67 ● WEB VIEWER 5. When done, click < Close >. T o install on MAC OS 1. Run the file trailing with “.dmg”. 2. Run the install package file automatically created, ending with “.
68_ web viewer web viewer 4. Select your language on the language selection screen, and click < Continue >. 5. Click < Agree >. 6. Click < Install >.
English _69 ● WEB VIEWER 7. Enter the password of the account currently logged in, and click < Install Software > and continue. 8. Once completed, click < Close >.
70_ web viewer web viewer INST ALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time.
English _71 ● WEB VIEWER 5. Click [ OK ]. The old version of Web Viewer Plug-in is deleted. 6. Click [ Install ] to begin installation of the Web Viewer Plug-in.
72_ web viewer web viewer USING THE LIVE SCREEN Item Description a Monitoring Move to the monitoring screen. b Playback Switch to the monitoring screen that plays recording data in the Micro SD memory. c Setup Move to the Setup screen. d Viewer Screen Displays the Live video on the screen.
English _73 ● WEB VIEWER Item Description h Full Screen Switch the current video to the maximum size of the monitor. i Capture Saves the snapshot as an image file in the .bmp or .jpg format. j Audio/Microphone Control Enable Audio and Microphone are control the Audio volume.
74_ web viewer web viewer T o fit the full screen 1. Click the [ Full Screen ( ) ] button. 2. This will fit the Viewer to the full screen. 3. T o exit the full scr een mode, press [ Esc ] on the keyboard. M ` For the Internet Explorer and Google Chrome browser , you can switch to the full screen.
English _75 ● WEB VIEWER PLA YING THE RECORDED VIDEO M ` Before you can play the video, you must configure the record settings. For details on record settings, refer to “ Storage ”.
76_ web viewer web viewer T o play the content after searching by event 1. Click the [ Playback ( ) ] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [ Event search ] button.
English _77 ● WEB VIEWER Name of time search scr een and its function Item Description a Time bar The section in the specific period is played by moving the time bar. b Search date setting Set the search date using the calendar. ` Dates for which there is video in the Micro SD memory card are displayed within the boxes on the calendar .
78_ web viewer web viewer T o play after searching by time 1. Click [ Time Search ( ) ]. 2. Click a desired date in the calendar . The video on the specified date will be played. 3. If the video playback is stopped, select a time and click [ Play ( ) ].
English _79 ● WEB VIEWER T o back up the searched video 1. During playback, click [ ] on the scene to back up. The scheduling window for backup start and end time appears. 2. Click [ ] button. The Save As window appears. 3. Confirm the save path and click [ Save ] button.
80_ web viewer web viewer T o Play an A VI File J ` The AVI file does not contain the recording time data. 1. Separate the micro SD memory car d from the camera. J ` Before separating the micro SD memory card, set the < Device > to < Off > in the “ Setup Event Storage ” menu.
setup screen SETUP You can configure the video & audio, network, event and system settings of the camera in the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. J ` Microsoft Silverlight 5.0 or higher is required to be installed on the PC for setup pages that provide preview video.
setup screen • E-mail/FTP pr ofile : Video profile to be transferred to the specified email or FTP site. ` Only the MJPEG codec can be set as the E-mail/FTP profile. • Recor d profile : This is the profile that is applied to video r ecording. • Audio-In : Sets whether to use audio for video r ecordings.
T o Add/Change the Video Profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions. 1. Select one from the < Video profile > options. 2. Provide the name and select a codec. 3. Specify the conditions under which the codec will be applied.
setup screen • Encoding priority : Y ou can set the video transfer method to Framerate or Compression. • GOV length : It specifies the distance (in terms of number of frames) between two consecutive I-Frames in a video sequence when H.264 codec was selected.
T o Use Cr op Encoding 1. Select < Use >. 2. Click < Set area >. The Crop Encoding Ar ea Setup window will pop up. 3. Select < Ratio >. • Ratio: It sets up the aspect ratio of the user specified area. - 16:9 : The aspect ratio shall be set to 16:9 as close as to the user specified area.
setup screen Video setup 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Video setup >. 3. Select a < Video source > mode. • Flip mode : T urn upside down the image that is captured by the camera. • Mirr or mode : Flip horizontal the image that is captured by the camera.
Audio setup You can configure the I/O settings of the audio source from the camera. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Audio setup >. 3. Set the audio input value. • Sour ce : Sets the audio input.
setup screen Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Camera setup >. 3. Configure the settings as necessary of : Sensor , SSDR, White balance, Back light, Exposure, Day/Night, Special, OSD, IR 4.
T o Set SSDR (Samsung Super Dynamic Range) In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness. 1. Select < SSDR >. 2. Set < Mode > to < On >.
setup screen T o Set BLC You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select < Back light >. 2. Set < Mode > to < BLC >. 3. Set < BLC level >. Y ou can change the level to adjust the brightness of the monitoring area.
T o Set Exposur e You can adjust the exposure level of the camera. 1. Select < Exposure >. 2. Select each item and set it properly . • Brightness : Adjust the scr een brightness.
setup screen T o Set Day/Night 1. Select < Day/Night >. 2. Select each item and set it properly . • Mode: Mode is used to adjust the color of Color or Black and White. - Color : The video is always output in color. - B/W : The video is always output in black and white.
T o Setup Special 1. Select < Special >. 2. Select each item and set it properly . • Sharpness Mode : Adjust the overall sharpness of the image. If selecting < On >, you can adjust the sharpness of the image. • Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.
setup screen T o Set OSD 1. Select < OSD >. 2. Select each item and set it properly . • Title overlay : It specifies if the camera name shall be displayed on the screen. • Camera title : It specifies the name of the camera to be displayed on the screen.
Focus setup You can adjust the focus and zoom ratio of video image. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Focus setup > . 3. Set the focus and zoom. • Focus : Manually adjusts the lens focus (Far Near).
setup screen NETWORK SETUP Interface 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Interface >. 3. Set the < Interface > and < IPv6 setup > as necessary . • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway , DNS1, and DNS2.
Port 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Port >. 3. T ype in each item in the Port menu as necessary . ` Neither the port range between 0 and 1023 nor port 3702 is available. • HTTP port : HTTP port used to access the camera via the web browser .
setup screen DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < DDNS >.
Registering with DDNS T o r egister your product with the Samsung DDNS 1. Visit the iPOLiS web site (www .samsungipolis.com) and sign in with a register ed account. 2. From the top menu bar , select < DDNS SERVICE > - < MY DDNS >. 3. Click [ PRODUCT REGISTRA TION ].
setup screen T o connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set < DDNS > to < Samsung DDNS >. 2. Provide the < Pr oduct ID > that you register ed product ID with the DDNS site.
IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < IP filtering >. 3. Select < Filtering type >. • Deny : If selecting this, access fr om those IPs that are added to the filtering will be restricted.
setup screen SSL You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the < Network ( ) > tab.
802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < 802.1x >. 3. Set the < IEEE 802.1x setting(EAPOL using EAP-TLS) >.
setup screen QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < QoS >. 3. Click the [ Add ( ) ] button. The IP list will be created. 4. Enter an IP address to which you will apply QoS.
• Enable SNMP T rap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generated when the community information is invalid.
setup screen UPnP discovery Cameras can be automatically searched in the client and operating system in support of the UPnP protocol. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < UPnP discovery >. 3. Set the < UPnP discovery >.
EVENT SETUP FTP / E-mail You can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC if an event occurs. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < FTP / E-mail >.
setup screen • E-mail configuration - Server address : Enter the IP addr ess of the email server that you transfer the alarm or event images to. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server .
T o make r ecording on the Micro SD memory 1. Check the memory card’ s < Free > size and < T otal > size. 2. If there ar e sufficient free space, set the device to < On >. Otherwise, check the stored data and if you find them not important, then click < Format > to format the Micro SD memory .
setup screen Alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Alarm input > from < Event action setup >.
7. Specify an operation that will perform if an alarm occurs. • FTP : Specify the use of FTP transfer in the alarm input setup. • E-mail : Specify the use of email transfer in the alarm input setup. • Recor d : Specify the use of recording in the alarm input setup.
setup screen T ampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the < Event ( ) > tab.
Motion detection / Video analytics Events of motion detection and video analysis can be set to trigger event signal output. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Motion detection / Video analytics > from < Event action setup >.
setup screen J ` Motion detection and Video analytics cannot be used simultaneously. ` Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. ` Detected size of an object may have difference with the actual size according to its shape.
T o use Motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select a motion detection mode. 2. Select < Sensitivity > tab to set the sensitivity level. Y ou can set the sensor’ s sensitivity to detect a motion out of the background fr om the monitoring video.
setup screen 4. Select < Area > tab. Y ou can specify an area on the scr een to include or exclude the area to/fr om detection. Y ou can specify up to 4 areas. • Detection ar ea : Sets the entire screen as excluded fr om detection, and adds specified area as motion detection area.
T o use Video analytics It detects event that meets all conditions specified by sensitivity, size and area and the event condition rules. 1. Select the video analysis mode. 2. Set < Sensitivity >, < Size > and < Area >. For further details on settings, refer to “ T o use Motion detection ”.
setup screen T o set the video analysis rules ` Passing 1. Set the type to < Passing, Entering/ Exiting >. 2. Set the event rule to < Virtual line based rules >. 3. On the screen, click on pr eferred starting and ending point of the virtual line, then a popup window appears.
` Appearing (Disappearing) 1. Set the analysis type to < Appearing (Disappearing) >. 2. Select the desired event rule: • Defined ar ea based rules : It detects event of appearing object that a.
setup screen Face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Face detection > from < Event action setup > .
Audio detection You can set to detect sound over the specified level and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Audio detection > from < Event action setup >.
setup screen Alarm output setup 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Alarm output setup >. 3. Set the camera’ s type of alarm output. ` If you change the alarm output type, the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly .
SYSTEM SETUP Product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Product information >. 3. Check the camera information, or provide details accor ding to your network environment. • Model : Model name of the pr oduct.
setup screen Date & Time 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Date & Time >. 3. Specify the time and date that will be applied to the camera. • Curr ent system time : Displays the current time settings of your system.
User 1. From the Setup menu, select the < System ( ) > tab. 2. Click < User >. 3. Provide the necessary user information. • Administrator passwor d change : Change the password for the administrator . ` The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
setup screen Upgrade / Reboot 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Upgrade / Reboot >. 3. Select a desired item and set it appropriately . • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
M ` It may take a max of 20 minutes for the upgrade process. If you forcibly terminate the upgrade process, upgrade will not be completed properly . ` During restarting the system, accessing with web viewer will not be made. ` Y ou can download the latest version from the Samsung web site (www .
setup screen Log You can check the system log or event log. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Log >. 3. Select a log type. • System : Y ou can check the system logs where any system changes are r ecorded including the time information.
Profile access You can check the profile information. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Profile access >. • Pr ofile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec.
appendix SPECIFICA TION Items Description SND-6084R SNO-6084R SNV-6084R Video Imaging Device 1/2.8” PS Exmor 2.38M CMOS (IMX136) Total Pixels 1952(H) x 1116(V) Effective Pixels 1944(H) x 1104(V) Scanning System Progressive Min. Illumination Color : 0.
Items Description SND-6084R SNO-6084R SNV-6084R Operational IR LED 12 ea 20 ea 12 ea Viewable Length 15m 30m 15m Camera Title Off / On (Displayed up to 45 characters) Day & Night Auto (ICR) / Colo.
appendix Items Description SND-6084R SNO-6084R SNV-6084R Operational Alarm events y File upload via FTP, E-Mail y Notification via E-Mail, TCP y local storage(SD/SDHC/SDXC) recording at Network disconnected y External output Network Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.
Items Description SND-6084R SNO-6084R SNV-6084R Network IP IPv4, IPv6 Protocol TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, HTTPS, SSL, DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2).
appendix Items Description SND-6084R SNO-6084R SNV-6084R Environmental Operating Temperature / Humidity -10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH AC24V : -50°C ~ +55°C (-58°F ~ +131°F) / Less than 90% RH DC12V, PoE (IEEE 802.
PRODUCT OVERVIEW SND-6084R Unit : mm (inch) 118 (4.65") Ø 132.1 (5.2") Ø 97 (3.82") 107.6 (4.24") English _135 ● APPENDIX.
appendix SNO-6084R Unit : mm (inch) 333.2 (13.12") 200 (7.87") 178 (7.01") 90.4 (3.56") 82.2 Ø 82 (3.23") 3- Ø 5.5 HOLES Ø 70 (2.76") (BODY) 321.6 (12.31") 134.6 (5.30") 90.4 (3.56") 90 (3.54") 96.8 (3.
SNV -6084R Unit : mm (inch) 69.5 (2.74") 118.5 (4.67") Ø 160 (6.3") Ø 100 (3.94") English _137 ● APPENDIX.
appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any problem.
PROBLEM SOLUTION <Motion detection / Video analytics> of <Event setup> is set to <Enable>, but no notification e-mail reaches me even when an analysis event had occurred. y Verify the settings in the following sequence: A. Check <Data & Time> settings.
OPEN SOURCE ANNOUNCEMENT GPL/LGPL software license The software included in this product contains copyrighted softwar e that is licensed under the GPL/LGPL. Y ou may obtain the complete Corresponding Source code fr om us for a period of three years after our last shipment of this product by sending email to help.
c) If the modified program normally reads commands interactively when run,you must cause it, when started running for such interactive use in the most ordinary way , to print or display an announcemen.
9. The Free Software Foundation may publish r evised and/ or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to addr ess new problems or concerns.
T o protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain r esponsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the fr eedom of others.
3. Protecting Users’ Legal Rights From anti-Cir cumvention Law . No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measur es.
or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity.
11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’ s “contributor version”.
A F AILURE OF THE PROGRAM TO OPERA TE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER P ARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The “Library”, below , refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work u.
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions of the Library , and distribute that wo.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this Lic.
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL T oolkit (http://www.
BSD License Some software components of this product incorporate sour ce code covered under the BSD license as follows. Component Name License URL net-snmp-5.7.1 pcre-8.20 openssh-5.9p1 lighttpd-1.4.31 Game-ws MiniUPnP Project Client pppd-2.4.5 BSD BSD BSD BSD 2.
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITE.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED.
The MIT License Some software components of this product incorporate sour ce code covered under the MIT license as follows MIT License 2.0 - Acewidget, bettermeans, jquery-ui, libxml, libxml2, Mesa3D-MesaLib,mwEmbed,OpenGL Samples Pack, Wide Studio, xorg-server , dropbear-2012.
The Independent JPEG Group’ s JPEG Software The software included in this product contains copyrighted softwar e that is licensed under the JPEG license. • JPEG license - Code project – Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Independent JPEG Group’ s free JPEG software.
Mozilla Public License Since we, at Samsung T echwin, used the Mozilla Firefox component without modifying the source code according to the MOZILLA Public license 1.1, we are not obliged to provide the sour ce code of the corresponding component. • V ersion 1.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor V ersion; 2) separate from the Contributor V ersion; 3) for in.
5. Application of this License. This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code. 6. V ersions of the License. 6.1. New V ersions. Netscape Communications Corporation (‘’Netscape’ ’) may publish revised and/or new versions of the License from time to time.
Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. RESPONSIBILITY FOR CLAIMS.
T -Ker nel License - This Product uses the Source Code of T -Kernel under T -License granted by the T -Engine Forum(www .t-engine.org) T -License [License Agreement for Source Code of T -Kernel] established by T -Engine Forum on January 23, 2004 revised on June 17, 2004 revised on December 21, 2006 revised on March 24, 2009 Article 1.
Article 4. License of Source Code 1. As provided for in this Article, T -Engine Forum shall provide, and grant a license to use, the Source Code fr ee of charge to any person who has taken the necessary procedure for r egistration as prescribed by T -Engine Forum and agreed to the T -License.
T -Kernel. Provided, however , that the Ported Source Code may be treated in the same way as the Modified Source Code until the time of registration hereunder . 5. The provision set forth in Article 3 shall apply to the Ported Source Code register ed in accordance with this Article.
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
SALES NETWORK SAMSUNG TECHWIN CO ., L TD. Samsungtechwin R&D Center , 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc.
Een belangrijk punt na aankoop van elk apparaat Samsung SNV-6084R (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung SNV-6084R heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung SNV-6084R vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung SNV-6084R leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung SNV-6084R krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung SNV-6084R bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung SNV-6084R kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung SNV-6084R . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.