Gebruiksaanwijzing /service van het product WS-32Z306V van de fabrikant Samsung
Ga naar pagina of 48
COLOUR TELEVISION Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference. R egister your product at www .
AA68-03660A-00Eng 6/7/05 4:46 PM Page 2.
Contents ◆ C ONNECTING AND P REP ARING Y OUR T ELEVISION ■ View of Your Television (depending on the model) ....................................... 5 ■ Infrared Remote Control .....................................................................
Contents (continued) ◆ U SING Y OUR T ELEVISION (continued) ■ Setting the Sleep Timer ................................................................................. 32 ■ Switching the Television On and Off Automatically ......................
Vi ew of Y our T ele vision (depending on the model) Control Panels Connection Panels 1) Power On/Off 2) Standby Indicator 3) Remote Control Sensor 4) Channel Selection 5) Volume Adjustment 6) Menu Display 7) Input source selection ➢ The actual configuration on your TV may be different, depending on your model.
Infrared Remote Contr ol English - 6 ➢ The performance of the remote control may be affected by bright light. TELEVISION STAND-BY DIRECT CHANNEL SELECTION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF .
Infrared Remote Contr ol (continued) English - 7 PROGRAMME SELECTION BY NAME SUB PICTURE(PIP) LOCATION SELECTION SUB PICTURE(PIP) SOURCE SELECTION SUB PICTURE(PIP) NEXT CHANNEL TELETEXT DISPLAY/ MIX B.
T Y T v You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it.
The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. 2 Press the “ ” button (On/Off) on the front of the television.
W se la Becoming F amiliar with the Remote Contr ol The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions.
When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. 1 If the television is in Standby mode, press the POWER () button on the remote control. Result : The message Plug & Play is displayed.
Y av p p c To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed.
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
Y re W This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. 1 Press the MENU () button. Result : The main menu is displayed.
You can store up to 100 television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify 1 Press the MENU () button.
Y yo yo A d 9 If you know the number of the channel to be stored, see the following steps. ◆ Press the ▲ or ▼ button to select Channel . ◆ Press the √ button. ◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). ◆ Press the √ button.
You can exclude the channels you have chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you do not specifically choose to skip are displayed during scanning.
If as If c Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Channel .
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Press the MENU () button. Result : The main menu is displayed.
This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area; a low-noise preamplifier boosts the incoming signal. This feature is working only weak in signal condition, and this is memorized on the current channel, additionally.
e English - 21 You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture . Result : The options available in the Picture group are displayed.
English - 22 Your television has several settings which allow you to control the picture quality. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture . Result : The options available in the Picture group are displayed.
English - 23 S electing the Picture Size (depending on the model) t You can select the picture size which best corresponds to your viewing requirements simply by pressing the “P.
English - 24 If sc If “ If ca If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture .
English - 25 If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”. 1 Press the MENU () button.
You can select the type of special sound effect to be used when watching a given broadcast. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Sound . Result : The options available in the Sound group are displayed.
The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Sound . Result : The options available in the Sound group are displayed. 3 Press the ENTER () button.
T o a o ➢ ◆ Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
The “DUAL I -II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “DUAL-I” or “STEREO”, depending on the current transmission. ➢ ◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO .
S electing the Melody You can hear clear melody sound when the television is powered on or off. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed.
Se t ting and Displa ying the Current T ime You can set the television’s clock so that the current time is displayed by pressing the “INFO ( )” button. You must also set the time if you wish to use the automatic on or off timers. ➢ When pressing the “” button (On/Off) on the front of the television, the clock setting will be reset.
Y Se t ting the Sleep Timer You can set your TV to automatically turn off after a preset interval. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select S etup . Result : The options available in the S etup group are displayed.
You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Switch off automatically at the time you select ➢ The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on the page 31).
Se t ting the P referred V olume Le vel/Channel The preferred volume and channel can be set for when the timer automatically turns on the TV. 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select S etup .
Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxes and the TV source (broadcast or cable). 1 Press the MENU () button. Result : The main menu is displayed. 2 Press the ENTER () button to select Input .
You can display a sub picture within the main picture of TV program or external A/V devices such as VCR or DVD. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the MENU () button.
Vi e wing the Picture In Picture (PIP) (depending on the model) (continued) 10 Press the ▲ or ▼ button to select Size . 11 Select a size of sub picture by pressing the œ or √ button.
M te T Y Vi e wing the Picture In Picture (PIP) (depending on the model) (continued) Easy functions of remote control Buttons Feature PIP Used to activate or deactivate the PIP function directly. SWAP Used to interchange the main picture and the sub picture.
Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information The teletext pages are organized according to six categories: Part Contents A Selected page number.
Y le T a co You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
You can store up to four teletext pages to display them later at leisure. 1 Select the LIST mode using the button. Result : Four 3-digit numbers are displayed in different colours. ➢ The button is used to switch between the LIST and FLOF (or FASTEXT) modes.
☛ Connecting to the External Input/Outputs (depending on the model) ➢ “ EXT 1 (RGB) ” is used for the equipment with an RGB output, such as video game devices or video disc players.
Connecting to the RC A Input (depending on the model) ➢ The RCA ( VIDEO and AUDIO - L + R ) connectors are used for equipment, such as camcorders, video disc players, and some video game devices.
B If te N N N S B d R A te If Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made. 2 Switch your television on, then press the SOURCE () button repeatedly.
Tr oubleshooting: Before Contacting S ervice Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.
Memo English - 46 AA68-03660A-00Eng 6/7/05 4:46 PM Page 46.
Memo English - 47 AA68-03660A-00Eng 6/7/05 4:46 PM Page 47.
ELECTRONICS AA68-03660A-00 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
Een belangrijk punt na aankoop van elk apparaat Samsung WS-32Z306V (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Samsung WS-32Z306V heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Samsung WS-32Z306V vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Samsung WS-32Z306V leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Samsung WS-32Z306V krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Samsung WS-32Z306V bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Samsung WS-32Z306V kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Samsung WS-32Z306V . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
