Gebruiksaanwijzing /service van het product K-200 van de fabrikant Sangean
Ga naar pagina of 29
.
1 Table of Contents Important Safety Instructions .............................................. 2-3 Introduction .............................................................................. 4 Controls a nd connections ..............................
2 Importa nt Safety Instruction s 1. Read and understand all safety and operating instructions before the radio is operated. 2. Retain instruction: The safety a nd operating instructions should be retained for further reference. 3. Heed warnings. All warnings on the a pplia nce and operating instructions should be followed.
3 14. Do not attempt to service the radio yourself. Re moving the cover may expose you to dangerous voltage, a nd will void the warranty . Refer all servicing to authorized service personnel.
4 Introduction The Sa ngean K-200 AM/FM RDS Digital T uning Radio provides the following ra nge of features in a strea m-lined portable size: Radio for AM and FM (with RDS) broa dca sts. 10 radio station presets (5 f or AM and 5 for FM) Clock display with time when in sta ndby .
5 1. 2. 3. 4. 5. 6. Backlight button RDS button Standby / Auto off Alarm 2 button Band button Station presets Egg Timer button Message 2 button Message 1 button CT (auto clock time) button Alarm 1 button 7.
6 12. 13. Built-in Microphone LCD display Tuning control knob V olume control knob 14. 15. Controls a nd connections GB.
7 16. 17. 18. Battery compartment Headphone socket AC in socket Aux in socket FM Antenna ja ck 19. 20. Controls and conne ctions.
8 Buzzer level control 21. Controls a nd connections GB.
9 Display icons A. B. C. D. E. F. G. H. I. J. Battery ca pa city indicator PM display Time indicator RDS icon Signal bar CT icon Alarm 2 indicator Alarm 1 indicator Frequency display Timer icon C.
10 Using the radio for the first time A. AC operation 1. Pla ce your radio on a flat surfa ce. 2. Insert the ada ptor plug into the AC socket located on the ba ck of your radio ensuring that the plug is pushed fully into the socket. 3. Plug the other end of the ada ptor into the wall socket.
11 Operating your radio – Se arch tuning AM/FM 1. Press the Sta ndby button to switch on your radio. 2. Press the Ba nd button a s needed until the AM or FM band is selected.
12 Ma nual tuning – AM/FM 1. Press the Sta ndby button to switch on your radio. 2. Press a nd relea se the Band button to sele ct AM or FM ra dio mode.
13 Setting up the tuning step incre ment 1. Ma ke sure your radio is in power off mode. 2. Press and hold the Tuning control knob until the setting of time format begins to fla sh. 3. After setting up the time format, pre ss and relea se the T uning control to enter the step increment setting.
14 Display modes – FM Y our radio ha s a range of display option s for FM radio mode. 1. Repeatedly press a nd relea se the RDS button to view the RDS information of the station you are listening to. a. b. c. d. Note: If no RDS information is available, then the radio will only be able to display the frequency .
15 Presetting station s in AM/FM modes There are 5 preset stations ea ch for AM and FM ra dio. They are used in the sa me way for ea ch waveba nd. 1. Press the Sta ndby button to switch on your radio. 2. Press the Ba nd button to select the desired waveband.
16 Clock and Alarms Setting the time format The clock display used in sta nd-by mode and on the playing mode screens ca n be set to 12 or 24 hour format. The selected format is then also used when setting the alarms. 1. Ma ke sure your radio is in power off mode.
17 Setting the clock time ma nually 1. Press the Sta ndby button to switch on your radio. 2. Press a nd hold the CT button until the radio beeps once to enter the clock time setting, a nd the hour setting will begin to flash. The display will show “CLOCKSET”.
18 Setting the clock time using RDS CT 1. T uning to a station transmitting R DS data, and press a nd relea se the CT button. The LCD display will show .
19 Setting the alarm clock Y our K-200 radio has two alarms which ca n each be set to wa ke you to AM/FM radio, buzzer alarm or voice messages. The alarms may be set while the unit is in standby mode or while playing. 1. Before setting a n alarm ensure that the clock ti me is set.
20 4. Rotate the T uning control to choose the required alarm type, and then press a nd relea se the T uning control to confirm the setting. The alarm can be set to buzzer , AM radio, FM ra dio or voice message (MSG1, MSG2 or MSG1+2). When radio mode is selected, the radio frequency and the preset number on the display will begin to fla sh.
21 When the alarm sounds T o cancel a sounding alarm, pre ss and hold the Alarm 1 or Alarm 2 button until the radio beeps once, a nd the display shows “ALR OFF”. And The LCD will return to normal display. When the buzzer alarm a ctivates, the alarm will start softly and gradually increa se in level.
22 Auto Off Timer Y our radio can be set to turn of f automatically after a preset time ha s ela psed. The Auto Off T imer setting can be adjusted between 15, 30, 45, 60, 90 and 120 minute s. 1. Press a nd hold the Standby button to enter the Auto Off Timer setting.
23 Egg Timer function 1. Press and rele a se the Egg timer button to enter the egg timer setting. The egg ti mer setting will start fla shing on the display . 2. Rotate the T uning control to adjust the minute setting during 1 and 120 minutes with 1 minute interval.
24 Display Brightness control The brightness of the display when the unit is in sta ndby mode may be adjusted. If you use the unit in the bedroom, you may prefer a lower sta ndby brightness level than the sta ndard setting. 1. Press a nd relea se the Backlight button to a djust the current brightness level of the LCD display .
25 Message function The message function ca n record and playba ck with 2 sets of voice message for 30 se conds each. 1. Press a nd hold the Message button to record the voice up to 30 seconds length. The LED is lighted during recording and the display will show “RECORD”.
26 Software version The software display ca nnot be altered and is just f or your reference. 1. Ma ke sure your radio is in power off mode (sta ndby mode). 2. Press a nd hold the Tuning control knob until the setting of ti me format begin s to flash. 3.
27 Auxiliary input socket A 3.5mm stereo Auxiliary Input socket is provided on the rear of your radio to permit a n audio signal to be fed into the unit from a n external audio device such a s iPod, MP3 or CD player. 1. Repeatedly press a nd release the Ba nd button until “AUX IN” is displayed.
28 Circuit Fe atures Loudspea ker Output Power Headphone socket Auxiliary socket Aerial System 2.5” 8 ohm full range 3 Watt / 1.5 Watt (batteries) 3.
Een belangrijk punt na aankoop van elk apparaat Sangean K-200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sangean K-200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sangean K-200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sangean K-200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sangean K-200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sangean K-200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sangean K-200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sangean K-200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
