Gebruiksaanwijzing /service van het product DE van de fabrikant Sanyo
Ga naar pagina of 50
SANYO Electric Co.,Ltd SANYO Electric T rading Co.,Ltd. T ype DE (Direct-fired Chiller/Heaters) T ype NE (Steam-fired Chillers) T ype LE (Hot water -fired Chillers) SANYO Electric Air Conditioning Co.,Ltd. International Business Division Overseas Sales & Marketing Dept.
1 CONTENTS Introduction 2 Absorption cyc le 11 Direct-fired chiller / heater s 15 Steam-fired chiller s 43 Hot water-fired c hillers 63 Utility 81 SUPER ABSORPTION The biggest cause of environmental deterioration, such as global warming, are CO 2 emissions due to energy consumption, and countermeasures are being undertaken on a worldwide scale.
2 3 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION SANYO absorption chillers highlights Introducing the SANYO absorption chillers: Nomenclature TSA - - DE - - 1 1 Unit T ype DE=Double ef fect.
4 5 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Component identification Chiller features Expert function by self-diagnosis ♦ ♦ ♦ ♦ ♦ Prediction information Graph 1.
6 7 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION SANYO control system Display and control board ■ Display(normal) Table 1. Indication lamp Sample 1.
8 9 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Optimum dilution cycle period can be shortened substantially according to microprocessor monitoring This results in the appropriate dilution cycle operating hours.
10 11 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION 160 150 140 0 0 20 40 60 80 100 51 0 1 5 2 0 2 5 3 0 3 5 Time(minutes) Steam consumption control for 10 minutes Steam consumption ratio Steam consumption ratio(%) Temperature of high temp.
12 13 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Absorption cooling cycle The SANYO super absorption machine applies the same basic absorption principles but enhances the cycle by adding additional heat exchangers and a second generator to recover all the available energy of the system and maximize the unit's COP (see Figure 2).
14 15 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION F . Condenser section The refrigerant vapor from the low temperature generator is condensed on the cooling water heat transfer tubes of the condenser (see Figure 7).
16 17 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Heating cycle In the absorption heating cycle (Figure 10), the unit is essentially acting as a boiler . Diluted solution is heated in the high temperature generator releasing refrigerant vapor from the absorbent.
18 19 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Double effect direct-fired absorption chiller / heaters This is a high efficient-double ef fect absorption chiller / heaters using combustion heat of gas or oil as the driving heat source. It is able to take chilled water of 7 ° C while hot water of 55 ° C is in heating mode.
20 21 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION 1.Absorption chiller / heaters (1) Lower shell • Evaporator and refrigerant dispersion tray • Absorber and absorbent dispersion tray • Eliminators (2) Heat exchangers • High temperature (H.
22 23 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Model A B L DE-11 215 865 2960 DE-12 15 665 3080 Figure 11. DE-11 Thru DE-12 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added.
24 25 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Model A B DE-21 350 1000 DE-22 150 800 Figure 13. DE-21 Thru DE-22 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added.
26 27 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Model A B DE-31 750 1400 DE-32 550 1200 Figure 15. DE-31 Thru DE-32 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added.
28 29 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Model A B C D E F G K L DE-51 3836 3966 4206 3130 3305 3511 4482 4600 5260 DE-52 4378 4508 4748 3330 3505 3711 5024 5200 5810 DE-53 4876 5006 5246 3530 3705 3911 5522 5700 6300 Figure 17. DE-51 Thru DE-53 NO TES 1.
30 31 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Model A B C D E F K L M DE-71 4426 4566 5096 3170 3395 3620 5700 6430 2-1/2 DE-72 4950 5090 5620 3470 3695 3920 6200 6960 3 DE-73 5450 5590 6120 3770 3995 4220 6700 7460 3 Figure 19. DE-71 Thru DE-73 NO TES 1.
32 33 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Foundation dimensional data (DE) NOTES : 1. Shaded area indicates the base of absorption chiller/heaters. 2. A reasonably level concrete foundation must be provided on which to mount the chiller .
34 35 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Field wiring (DE) Figure 26. T ypical electrical field connection diagram - Direct-fired (DE) Chilled/hot water pump interlock T o power s.
36 37 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION Sequence of cooling operation (DE) Figure 27 illustrates the typical operating sequence of a SANYO DE di- rect-fired absorption chiller / heaters. The NE steam-fired unit does not include the time delays associated with the burner blower , gas valve and ignition functions.
38 39 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION The flue and stack must be heat-insulated and provided with a damper and a condensate drain. The flue should never be connected to an incinerator stack. Locate the top end of the smoke stack at a sufficiently large distance away from the cooling tower .
40 41 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION The DE direct-fired chiller/heaters are equipped with a nozzle mix burner . The burners are capable of firing with natural gas.
42 43 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY SUPER ABSORPTION 1. Equipment and parts outside the area surrounded by the broken line are not supplied by SANYO.
45 SUPER ABSORPTION 44 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Double effect steam-fired absorption chillers Chilled water of 7 ° C is produced by high efficient double ef fect operation using steam of 784kPa or hot water of 190~200 ° C as its driving heat source.
47 SUPER ABSORPTION 46 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY The heating cycle Item T emperature Flow rate Max. working pressure Hydraulic test pressure Fouling f actor Material of tubes W ater quality Structure of water header Manuf actur ing standard of water header T emperature Flow rate Max.
49 SUPER ABSORPTION 48 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Figure 34. NE-11 Thru NE-12 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added. 2. indicates the position of anchor bolts.
51 SUPER ABSORPTION 50 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Figure 36. NE-21 Thru NE-22 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added. 2. indicates the position of anchor bolts.
53 SUPER ABSORPTION 52 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Figure 38. NE-31 Thru NE-32 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added. 2. indicates the position of anchor bolts.
55 SUPER ABSORPTION 54 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Model A B C D E L NE-51 3836 3966 4206 4482 4600 5185 NE-52 4378 4508 4748 5024 5100 5725 NE-53 4876 5006 5246 5522 5600 6225 Figure 40. NE-51 Thru NE-53 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk.
57 SUPER ABSORPTION 56 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Model A B C D L NE-71 4426 4566 5096 6000 6430 NE-72 4951 5091 5621 6500 6960 NE-73 5451 5591 6121 7000 7460 Figure 42. NE-71 Thru NE-73 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk.
59 SUPER ABSORPTION 58 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Name Lamp color Running(Operation) indication lamp Red Stop indication lamp Green Alarm indication lamp Orange Remote / Local select button with lamp Red Mode select button with lamp Red Data display LED symbol Control panel (NE) Foundation dimensional data (NE) T able 10.
61 SUPER ABSORPTION 60 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Field wiring (NE) Figure 47. T ypical electrical field connection diagram - Steam-fired (NE) Chilled water pump interlock T o power source.
63 SUPER ABSORPTION 62 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY 1. Work outside the area surrounded by this line shall be under- taken at the expense of the owner . 2. Refer to the Dimensions diagrams and specification tables for pipe connections and diameters.
65 SUPER ABSORPTION 64 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Hot water-fired absorption chillers Chilled water of 8 ° C can be produced using waste hot water of 80 ° C to 95 ° C from gas engine etc. It is a chiller driven by waste hot water which temperature is low .
67 SUPER ABSORPTION 66 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY The heating cycle Item T emperature Flow rate Max. working pressure Hydraulic test pressure Fouling f actor Material of tube W ater quality Structure of water header Manuf actur ing standard of water header T emperature Flow rate Max.
69 SUPER ABSORPTION 68 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Model A B C D L K LE-01 1426 1566 1591 1687 2210 1900 LE-02 1426 1566 1591 1687 2210 1900 LE-03 1926 2066 2091 2187 2710 2400 Figure 50. LE-01 Thru LE-03 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk.
71 SUPER ABSORPTION 70 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Figure 52. LE-13 Thru LE-14 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added. 2. indicates the position of anchor bolts.
73 SUPER ABSORPTION 72 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Figure 54. LE-31 Thru LE-32 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added. 2. indicates the position of anchor bolts.
75 SUPER ABSORPTION 74 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Figure 56. LE-51 NO TES 1. Dimensions (L), (W), (H) are for the unit with rupture disk. The dimensions are changed if additional par ts are added. 2. indicates the position of anchor bolts.
77 SUPER ABSORPTION 76 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Generator temp 69.9 ° C MODE STOP RUN CHILLER BUZZER STOP STOP LOCAL REMOTE OPERA TION ALARM REF PUMP ABS PUMP PURGE PUMP SETTING Name La.
79 SUPER ABSORPTION 78 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Field wiring (LE) Figure 60. T ypical electrical field connection diagram - Hot water-fired (LE) The unit can be operated b y the following fiv e type signal. (1)Non-voltage normal open contact(A) f or star t & stop (DC24V 10mA).
81 SUPER ABSORPTION 80 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY 1. Work outside the area surrounded by this line shall be under- taken at the expense of the owner . 2. Refer to the Dimensions diagrams and specification tables for pipe connections and diameters.
83 SUPER ABSORPTION 82 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Capacity ratings (DE and NE) Chilled water temperature Cooling water inlet temperature ( ° C) Outlet temp. 5.0 6.0 7.0 8.0 Inlet temp. 28 29 30 31 32 33 8.0 9.0 10.0 11.0 12.0 8.0 9.0 10.0 11.
85 SUPER ABSORPTION 84 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Pressure drop (kP a) Flow rate (m 3 /h) Graph 13. Chilled water pressure drop curve (DE and NE) 900 800 700 600 500 400 300 2000 200 40 100 90 80 20 30 100 90 80 70 60 50 40 30 200 70 60 50 1000 11 12 13 14 21 22 23 24 31 32 41 42 53 52 51 63 62 61 73 72 71 82 81 Graph 14.
87 SUPER ABSORPTION 86 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY 800 700 600 500 400 300 100 90 80 70 60 50 40 30 200 20 10 01 02 03 11 12 13 14 21 22 24 31 32 41 42 51 52 53 23 Graph 15.
89 SUPER ABSORPTION 88 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY 1. In order to prevent freeze-up of chilled water during unit shutdown, the chilled water pump(s) and air handler must be run for 15 minutes after the burner is shut off. This will allow time for the automatic dilu- tion cycle to be completed.
91 SUPER ABSORPTION 90 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY 100mm thick insulation f or hot surface 75mm thick insulation f or hot surface Don't insulate the motor , refrigerant pump and sight glass.
93 SUPER ABSORPTION 92 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Evapor ator cover Evapor ator cover Generator cov er Generator cov er Don't insulate the motor , refrigerant pump and sight glass.
95 SUPER ABSORPTION 94 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY The cooling water of an open-type recycling cooling tower lowers tem- perature of the cooling water using vaporized latent-heat, and is reused. At this time, the water is evaporated and dissolved salts.
97 SUPER ABSORPTION 96 ENVIRONMENT ALL Y FRIENDL Y TECHNOLOGY Examples of Installation Osaka Dome City User : OSAKA GAS Co.,Ltd. Iwasaki Energy Center TOKYO INTERNA TIONAL FORUM User : T okyo Heat Supply Co.
Een belangrijk punt na aankoop van elk apparaat Sanyo DE (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sanyo DE heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sanyo DE vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sanyo DE leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sanyo DE krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sanyo DE bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sanyo DE kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sanyo DE . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
