Gebruiksaanwijzing /service van het product 16-300310 van de fabrikant Avaya
Ga naar pagina of 25
Avaya Video Conferencing Solutions Quick Setup Release 6.0 16-300310 Issue 1 August 2010.
© 2010 A vaya Inc. All Right s Reserved. Notice While reasonable ef forts were made to ensure that the information in this document was complete and accurate at the time of print ing, Avaya Inc. can assume no liability for any errors. Chan ges and corrections to the information in this document might be incorporated in fu ture releases.
Canadian Department of Communications (DOC) Interference Information This Class A digital appar atus compl ies with Ca nadian ICE S-003. Cet appareil numéri que de la classe A est conforme à la norme NMB-003 du Canada. This equipment meets th e applicable Industry Canada T erminal Equipment T echnical Specifications.
AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 4 Overview This Quick setup guide covers the basic administration t asks to set up SIP and H.323 video endpoint s. For detailed in formation, see A vaya video confere ncing Solutions Networkin g Guide 6.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 5 ● Perform a network readiness test or network assessment to ensure your network is capable of su pporting bandwidth demand s of video over IP .
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 6 3 Enabling video for the SIP signaling gro up 1. On System Manager , click Element s > Feature Management > Network - Signaling Group s.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 7 4 Identifying the IP-codec-set 1. Note the values of the Near-end No de Name and Far-end Network Region fields.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 8 Administration of A vaya Series 1000 Vi deo Conferencing .
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 9 T able 3: Creating a template 1 Enabling Call Appearace feature 1.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 10 Adding video users T able 4: Adding video users 1 Creating a New User Profile On System Manager , click Users > Ma nage Users and click on New to open the New User Profile page.
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 11 3 Enabling Session Manager Profile Select the check box .
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 12 Configuring the A vaya Series 1000 Video Conferencing End point s Perform the following step s to configure all A vaya Series 1000 Video Conferencing Endpoint s using the IR Remote Contro l .
Configuration of SIP video endpoi nts on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 13 3 Enabling SIP protocol Select Communications , cli ck on SIP , and set the following paramete rs: ● SIP Username : ext.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 14 Configure H.323 video end point s on Communication Manager 6.0 This section provides a set of guidelines to configure video call ing facility on H.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 15 Configuring Polycom End point s Use this procedure to configure the V ideo cal ling facility for all Polycom end point users.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 16 T able 7: Add users/st ations to Polycom end point s 1 Install the Polycom system and connect it to your network.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 17 Configuring Polycom RMX Series V ideo Conferencing Bridge Plat form Use this procedure to configure the Po lycom RM X series video co nferencing Bridge platform.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 18 4 Use the change trunk-group n command (where n is the trunk group you adde d in S tep 2) to add members to the trunk gro up.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 19 Configuring Ad-hoc V ideo Confer encing for a Polycom RMX V i.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 20 4 Use the add video-bridge command to configure a video bridge for the RMX system. Set the following para meters: ● Name to the name for this video b ridge (for example, Ad Hoc video Bridge - RMX).
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 21 7 For the Conference IVR Service, perform the following steps.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 22 Display Cap acity for Ad-hoc video Conferencing. T o display the capacity for Ad-hoc video confe rencing on the Communication Mana ger system: T able 10: Display cap acity for Ad-hoc video conferencing.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 23 Administering Polycom PathNavigator/ CMA Gatekeepers Perform .
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 24 4 Use the add signaling- group command to add a signaling group for the gatekeeper . Set the following p arameters: ● Group T ype: H.
Configure H.323 vid eo endpoints on Communication Man ager 6.0 AVTS R 6.0 Quick Setup For feedback, use doc ument@avaya.com August 2010 25 Configuring A vaya one-X ® Communicator Avaya one-X ® Communicator can be configured with eit her SIP or H.323 protocol.
Een belangrijk punt na aankoop van elk apparaat Avaya 16-300310 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Avaya 16-300310 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Avaya 16-300310 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Avaya 16-300310 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Avaya 16-300310 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Avaya 16-300310 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Avaya 16-300310 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Avaya 16-300310 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
