Gebruiksaanwijzing /service van het product PLV-75/PLV-80 van de fabrikant Sanyo
Ga naar pagina of 60
Multimedia Pr oject or MODEL PL V -75/PL V -80 PL V75L/PL V -80L (Lensless) Owner ’ s Manual.
2 CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES AC P ower Cor d f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus .
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 15 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 POSITIONING PROJECTOR 9 LENS INSTALL.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TTOM OF CABINET BA CK OF CABINET HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent.
NO TE ON PO WER CORD AC Power Cord must meet requirement of country where you use a projector. Confirm an AC plug type with chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
9 PREP ARA TION POSITIONING PR OJECT OR ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 5.0’ (1.5m) ~ 52.2’ (15.9m). ● Refer to figure below to adjust screen size. Screen Size Distance 40” 30” 5.
10 PREP ARA TION ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.
11 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING A PR OJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case.
12 CONNECTING PR OJECT OR S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT A UDIO 1 A UDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H /V V ( MONO ) TERMINALS OF PR OJECT OR When controlling the projector from a computer, connect the computer to this connector with a control cable.
13 CONNECTING PR OJECT OR S–VIDEO R–A UDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT AUD I O 1 A UDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JA CK GB R H/V V ( M.
14 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT A UDIO 1 A UDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INP.
15 BEFORE OPERA TION ON-OFF SELECT COLOR M. MENU LIGHT I - INPUT 2 3 SCREEN SCREEN L L 1 D.ZOOM NO SHOW NO SHOW FREEZE MUTE MUTE Z Z F F KE Y S. I I CXTW INPUT IMAGE SELECTION KEYSTONE FOCUS LENS ZOOM V O L U M E - V O L U M E + AUTO PC AUTO OPERA TION OF REMO TE CONTROL LIGHT BUTTON Lights the buttons on the remote control for about 10 seconds.
16 BEFORE OPERA TION To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid.
17 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS Used to open or close MENU operation. (P18, 19) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level.
18 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. 2 MOVING POINTER 3 SELECT ITEM Move pointer ( ✽ see below) or adjust value of item by pressing POINT buttons on Top Control or on Remote Control Unit.
19 BEFORE OPERA TION MENU B AR FOR PC SOURCE Press MENU BUTTON while connecting to PC input source. FOR VIDEO SOURCE Press MENU BUTTON while connecting to VIDEO input source. PC SYSTEM MENU Used to select computer system. (Refer to P24, 25) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter.
20 B ASIC OPERA TION TURNING ON THE PR OJECT OR TURNING ON / OFF PR OJECT OR Connect the projector's AC power cord into an AC outlet. The LAMP Indicator lights RED, and READY Indicator lights GREEN. Press the POWER ON-OFF button on the top control or on the remote control to ON.
21 B ASIC OPERA TION Press the POWER ON-OFF button on the top control or on the remote control, and a message "Power off?" appears on the screen. Press the POWER ON-OFF button again to turn off the projector. The LAMP Indicator lights bright and READY Indicator turns off.
22 B ASIC OPERA TION ADJUSTING SCREEN Message disappears after 4 seconds. Message disappears after 4 seconds. ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM ▲ / ▼ button on Remote Control Unit. Message “Zoom” is displayed.
23 Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press NO SHOW button again or press any other button.
24 SELECTING INPUT SOURCE DIRECT OPERA TION Select INPUT source by pressing INPUT button on Top Control or on Remote Control Unit. Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).
25 COMPUTER INPUT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on pages 52-53). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting.
26 COMPUTER INPUT PC ADJUSTMENT AU TO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear.
27 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector.
28 COMPUTER INPUT Reset Store Closes PC ADJUST MENU. Quit Other icons operates as follows. To store adjustment parameters, move a red frame pointer to Store icon and then press SELECT button. Move a red arrow pointer to any of Mode 1 to 10 that you want to store and then press SELECT button.
29 COMPUTER INPUT PICTURE IMA GE SELECT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT UP/DOWN buttons to move a red frame pointer to level that you want to set and then press SELECT button.
30 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SCREEN Menu icon.
31 When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Y,Pb/Cb,Pr/Cr SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to INPUT Menu icon.
32 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear.
33 VIDEO INPUT PICTURE IMA GE SELECT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT UP/DOWN buttons to move a red frame pointer to level that you want to set and then press SELECT button.
34 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SCREEN Menu icon.
35 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT UP/DOWN buttons to move a red frame pointer to item that you want to adjust and then press SELECT button.
36 PICTURE IMA GE Auto picture control Press either POINT LEFT button or POINT RIGHT button to Auto picture control position that you want to select . (Off, L1 or L2) Off ······· Auto picture control OFF position. L1 ········ Auto picture control LEVEL 1 position.
37 Reset all adjustment to previous figure. Reset Store Closes IMAGE ADJUST MENU. Quit Other icons operates as follows. To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to Image 1 to 10 where you want to set and then press SELECT button.
38 Keystone Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move a red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese.
39 SETTING Logo Logo settings can be altered as follows: Logo select This function decides what to be displayed on the starting-up dis- play as follows: Off .
40 SETTING Ceiling Rear Ceiling When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “On,” the picture is left/right reversed.
41 Remote control This projector provides eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time.
42 SETTING The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the POINT DOWN button, and press the SELECT button. The New PIN code input dialog box will appear. Select a number with the POINT LEFT/RIGHT buttons and fix the number with the SELECT button.
43 SETTING This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function.
44 MAINTENANCE W ARNING TEMP . INDICA T OR Ventilation Slots of a projector may be blocked. In such an event, reposition a projector so that Ventilation Slots are not obstructed. Air Filter may be clogged with dust particles. Clean Air Filter by following section AIR FILTER CARE AND CLEANING on next page.
45 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When a projector is not in use, replace Lens Cover.
46 APPENDIX Turn off a projector and disconnect AC plug. Allow a projector to cool for at least 45 minutes. Loosen 2 screws with a screwdriver and pull out Lamp Assembly by grasping Handle. 1 3 Replace Lamp Assembly with a new one and tighten 2 screws back.
47 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.
48 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 12 ~ 14.
49 APPENDIX Remote Control Unit does not work. ● Check batteries. ● Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. ● Make sure you are not too far from a projector when using Remote Control Unit. Maximum operating range is 16.
50 APPENDIX System (1) SVGA 1 SVGA 2 SVGA 3 Auto PC Adj. Fine sync. Total dots Position H Position V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit Standard Real Image 1 Image 10 Normal Full True D.
51 APPENDIX Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N V ideo Input Auto 1035i 720p 575p 480p 575i 480i Quit Full Zoom 0 - 63 0 - 63 0 - 63 0 - 63 Off/On/Film Volume Language System (3) System (2) Imag.
52 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.
53 APPENDIX NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 720 x 480 ( Progressive ) 31.47 59.88 D-575p 768 x 575 ( Progressive ) 31.25 50.00 D-SVGA 800 x 600 37.
54 APPENDIX • • • on • • • dim • • • off • • • flashing ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly.
55 Owner’s Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Control Cable for Serial port Lens Cover (PLV-75/PLV-80) PIN Code Label Multi-media Projector Accessories ● Specifications are subject to change without notice.
56 APPENDIX This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
57 CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 TERMINALS (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz.
58 APPENDIX OPTIONAL P AR TS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. ● DVI Cable Type No. : KA-DV20 ● HDB 15 pin-SCART 21 pin Cable Type No. : POA-CA-SCART ● Long Zoom Lens Type No.
59 APPENDIX Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory set number will be invalid.
Printed in Japan Part No. 610 324 1739 (1AA6P1P4949-- M4YA) SANY O Electric Co., Ltd.
Een belangrijk punt na aankoop van elk apparaat Sanyo PLV-75/PLV-80 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sanyo PLV-75/PLV-80 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sanyo PLV-75/PLV-80 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sanyo PLV-75/PLV-80 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sanyo PLV-75/PLV-80 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sanyo PLV-75/PLV-80 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sanyo PLV-75/PLV-80 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sanyo PLV-75/PLV-80 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
