Gebruiksaanwijzing /service van het product POA-PN40 van de fabrikant Sanyo
Ga naar pagina of 86
OWNER'S MANUAL PJ-Net Organizer MODEL No. POA-PN40 LINK AC T.
2 Compliance and Caution T rademarks PJ-Net Organizer is a registered trademark of San yo Electric Co. Ltd. PJLink is a reg- istered trademark of JBMIA. Ethernet is a registered trademark of Xerox Corporation. Microsof t, Windows, Windows NT are registered trademarks of Microsof t Corporation.
3 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH CA UTION SANY O Electric Co., Ltd. assumes no responsibility for the loss or damage of data or damage of the computer caused by usung this product. CA UTION ON USE IN NETWORK - When y ou receiv e an alert e-mail from the projector , you must check the projector immediately .
4 Compliance .............................................................................................................. 2 F ederal Communication Commission Notice ....................................................... 2 T rademarks ..............
5 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Contents Sav e the controls and set tings ........................................................................... 49 Sav e/delete the set tings .......................................................
6.
7 PJ-NET ORGANIZER O WNSER'S MANUAL ENGLISH 7 1 Chapter 1 Pr eparation Describes f eat ures and operating environment of this product..
8 Chapter 1 Preparation Featur es E-Mail Alert function ( ☞ p.32) The projector (Network Unit) sends mess ages to the regis - tered e-mail addresses when a lamp abnormality or power f ailu re oc curs on the proje cto r . This message describes how to s olv e the c ause of t he pr ob - lems.
9 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Features Multi-control function ( ☞ p.56) A single computer can con- trol and set up the multiple projectors at the same time. PC6 PC4 PC5 Select Input 2 for PJ1 to PJ 4 PJ2 PJ1 PJ4 PJ3 Automatic On/Off using Clock function ( ☞ p.
10 Chapter 1 Preparation *1 The "Light Mode" and "Standard Mode" will be explained on item "Displa y Mode" ( ☞ p.24-26) PD A restriction The PD A can be used for the Light mode* 1 only . The operating system of the PD A is P oc ketPC2002 or higher .
1 1 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Operating environment Befor e use Package contains The pac kage cont ains follo wing items. Chec k eac h item as y ou unpac k the pac kage. If you ha ve an y of the following items missing, contact the sales dealer .
12 Chapter 1 Preparation.
13 PJ-NET ORGANIZER O WNSER'S MANUAL ENGLISH Chapter 2 Installation 2 Describes how to inst all the Network Unit, and configure the network..
14 Chapter 2 Installation The f ollowing are instr uctions for at t ac hing this product to the projector and connect- ing it to the network. Please revie w the entire procedure to become familiar with it. Function of the Network Unit ( ☞ p.15) 1 Installation and network configuration ( ☞ p.
15 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH [1] Name and function of each part Name and function of each part LINK AC T Serial port Used to control the external equip- ment via the network. ( ☞ p.61) Power indicator This lights up red when the network function is set ON in the projector menu.
16 Chapter 2 Installation Mounting ✐ A C cord must be disconnected when mounting or removing this product other wise it may damage the product. ✐ Do not install multiple Network Units into a projector other wise it may damage the product. ✐ Connect the A C cord after connecting the LAN cable and computer .
17 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Connection of LAN cable T o connect to the net w ork, it is required to use the U TP (Unshielded T wisted Pair) straight cable with RJ-45 plug . There are t wo dif ferent types of cables depending on whether the network is constructed with 1 0Base-T or 1 0 0Base-TX.
18 Chapter 2 Installation 1 Selection of network menu T urn on the projector and display the menu on the screen. Select network icon from the main menu and then press SELECT button once. Chec k that the mode is "On". If not, c hange mode to "On" using the pointer but tons ( 7 , 8 ).
19 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH 2 Configuration for IP Address/ Sub net/ Gateway* 1 /DNS* 2 Press SELECT but ton again. The follo wing network set ting pallet appears on the screen.
20 Chapter 2 Installation Network PIN code setting The net w ork PIN code can be set to restrict access to the set ting page of the projec- tor using the web bro wser . ✽ Def ault network PIN code [0000] means no network PIN code is set. 1 Displa ying network PIN code menu Select network menu and then select "Network PIN code" sub menu.
21 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Installation and network configuration How to enter the numbers with the screen 10-key pallet 1 Select a column with a red frame by using the point but tons 7 8 . 2 Press SELECT but ton. The screen 1 0-ke y pallet appears on the screen.
22 Chapter 2 Installation Notice about system construction F or installation of multiple projectors into the same network with Network Unit. Do not install multiple projectors with Network Units that hav e their default net w ork set tings to the same network.
23 PJ-NET ORGANIZER O WNSER'S MANUAL ENGLISH Chapter 3 Basic Setting and Operation 3 Describes basic operations and set tings for controlling the pro- jector by using the web browser . It is required that computer and projector is connected to the network and the network address is properly configured.
24 Chapter 3 Basic Setting and Operation Login the setting page of the pr ojector 1 Enter the IP addr ess Launc h the web browser installed in your computer , enter the IP address into the "A ddress" on the bro wser and then press "Enter" ke y .
25 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH 3 Display of main setting page The follo wing main set ting page will be displa yed according to y our display mode selection. P erform various kinds of set tings through this page. Clic k on the menus to display the control and set ting pages.
26 Chapter 3 Basic Setting and Operation x Main setting page in the Light Mode display How to use the setting page T o con trol and set up th e pr ojec tor , us e the set ting me nus on t he w eb bro wser . Des crib es the bas ic o per atio n an d p roce dure s co mmo nly used on thi s ma nua l.
27 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH T ext bo x setting Enter a number or te xt and then clic k Set button. or Change a value with ▲ o r ▼ but ton and then clic k Set but ton. The value c hanges quic kly when keeping pressing ▲ or ▼ but ton.
28 Chapter 3 Basic Setting and Operation Initial setting Af te r in st all ing thi s p rod uc t to th e p roje ct or , pe r for m t he fo llow in g basic ini tial settin g. Click Initial Setting o n the main menu to display the i nitial sett ing page.
29 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Network PIN code setting This is to set the network PIN code to restrict the access from an unauthorized person through the network. Enter a 4-digit number as the network PIN code onto the text bo x and clic k Set but ton.
30 Chapter 3 Basic Setting and Operation Date and time setting A uto setting Clic k AUT O but ton on the page, the time which is set on your computer is set to the Network Unit. Note: Confirm that y our computer has a correct cloc k time before performing the auto time set ting .
31 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Network configuration Clic k Network on the main menu. The following setting page is dis - play ed. This page is to set the IP Address, Subnet Mask, Default Gatew ay , DNS (Domain Name Ser ver) and projector name.
32 Chapter 3 Basic Setting and Operation E-mail setting This product has an E-mail function whic h can send an alert message to users or an administrator if it detects an abnormality on the projector or r un out of the lif e span of the lamp. Clic k E-mail Setting on the main menu and follo w the below steps.
33 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH E-mail setting 2 Registering and deleting E-mail addresses Clic k "Add e-mail address" and type the e-mail address onto the text box and clic k Set bu t to n. T o c hec k the registered addresses, clic k Check/Delete sub menu tab.
34 Chapter 3 Basic Setting and Operation Examples: T ype and contents of alert mail When the projector has an abnormality , the following alert messages are sent to the registered E-mail address according to your selected condition. A dministrator or user can t ak e an ef ficient action quic kly by receiving this message.
35 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH E-mail setting ● When the life span of lamp is reached: ✐ R eplace it with a new lamp immediately and reset the lamp counter . If the projector is used without reset ting the lamp counter , the alert mail is sent to users in every pow er -on of the projector .
36 Chapter 3 Basic Setting and Operation SNMP setting This product provides a SNMP (Simple Network Management Protocol) agent function. The SNMP consists of a manager and agents. The group whic h communicates inf ormation eac h other with SNMP is called "Community".
37 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Item Description Community name ... Enter communit y name to send "T rap". Default name is "public". T rap address ...... Enter IP address of the SNMP manager computer to receive "T rap".
38 Chapter 3 Basic Setting and Operation.
39 PJ-NET ORGANIZER O WNSER'S MANUAL ENGLISH Chapter 4 Contr olling the Projector 4 Describes controlling and set ting of the projector by using the web bro wser .
40 Chapter 4 Controlling the Pr ojector Power contr ol and status check Clic k Po wer & Status on the main menu. The control page will be dis- play ed. By clic king ON or Standby but ton on the page, the po wer of the projec- tor can be controlled.
41 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH ✐ T he p roje ctor can not b e t urned on d uring the pro ject or i s on coo ling do wn. ✐ T he w eb bro wser c hec ks and upda tes the proj ecto r's c ondi tion e ve r y 30 s econ ds a utom atica lly .
42 Chapter 4 Controlling the Pr ojector Contr ols Click C ontrol on the main menu. The setting m ethod dif fers dep end - ing o n the co nt ents of the p age.
43 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH System This functi on is to se lect the system of signal input t o the proje ctor . The available system mode are listed on the pull-down menu but ton according to the input signal. Select a system and then clic k Set but ton.
44 Chapter 4 Controlling the Pr ojector Item Description Contrast ............. Adjusts pict ure contrast (0~ 63) Brightness ......... Adjusts pict ure brightness (0~ 63) Color .................. Adjusts pict ure color saturation (0~ 63) Tint ........
45 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Sound This function is to adjust the sound of the projector . The values in the te xt bo x repre- sent the current control v alue or status. Item Description V olume ............... Ad justs the soun d v olum e fr om th e sp eak ers.
46 Chapter 4 Controlling the Pr ojector ✐ Th e PC adju stme nt set ting s can be st ored up to 50 sets , 1 0 sets for Mo de1 to Mo de 1 0 are st ored into the pro ject or a nd 4 0 set s f or ExMo de1 1 to ExMo de50 are stor ed i nto the netw ork unit.
47 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Setting up the pr ojector Click S etti ng on the ma in menu. This function is to set up the projector . Select the sub menu [Screen set ting] or [Set ting] and then set up eac h set ting . Item Description Screen .
48 Chapter 4 Controlling the Pr ojector Item Description Remote control ID ..... Sets the remote control ID .(Code 1 - Code 8) F an speed control ...... Sets the fan control speed. (Normal, Max) Status ........... Indicates the current fan mode. F actory default .
49 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Save the contr ols and settings This page is to save and load the controls and set tings of the projec- tor in the bloc k. The storable items are "PC adjustment", "Control" and "Set ting".
50 Chapter 4 Controlling the Pr ojector Check the saved items Clic k Chec k but ton to c hec k the current set ting condition of the controls. Eac h item of "PC adj.
51 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH How to set the timer 1 Set a day or date T o set the timer ev ent at same time e veryday or e ver y w eek, Select da y entr y with radio but ton and then select desired da y with the pull-down menu but ton.
52 Chapter 4 Controlling the Pr ojector 2 Set an execute time T ype the time with (Hour:Minute) and 24 hours format. Ex.: T ype [18:25] if you specify [PM 6 o’clock and 25 minutes]. 3 Select an event action Select an ev ent action from the pull-down menu.
53 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH ✐ The timer operates by using the cloc k function provided in this product. Before setting the timer , please confirm that the current date and time are set correctly . Timer and cloc k func - tions are functioning using a lithium battery provided in this product.
54 Chapter 4 Controlling the Pr ojector Pr ojector information This page is to display the basic information of the projector status. Clic k Information on the main menu. Items Description Input .................. Display s selected input and source. System .
55 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Icon displa y/background Status White-Y ellow/Blue Lamp on (Normal) White-Y ellow/Red Lamp on (Lamp is being used over a specified use time, replace la.
56 Chapter 4 Controlling the Pr ojector Multi-contr ol Controlling and setting the multi-pr ojectors This function enables you to control the multiple projectors equipped with the Net w ork Units that are connected to the network. Clic k Multi Control on the main menu to display the control page.
57 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Start/stop the multi control T o st art or stop controlling the multi-projectors, clic k Multi control set ting menu and select ON or OFF . Multi control setting OFF .....Stops multi control function ON .
58 Chapter 4 Controlling the Pr ojector Register the projector T o us e th e multi cont rol func tion , regist er the IP ad dres s of th e pr oje ctor y ou inte nd to contr ol. Clic k PJ reg istr ation sub menu t ab an d se t t he IP add ress an d Memo, then cli c k Set but ton.
59 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Multi-control Status If some of the registered projectors are disabled b y some reasons (suc h as disconnecting the power source, disconnecting the LAN cable, disconnecting from the network), control c hanges will continue to be ef fectiv e for the projectors that are still activ e.
60 Chapter 4 Controlling the Pr ojector Conf. & Change page in the light mode F ollowing functions in the "Conf . & Change" page are not av ailable in the light mode.
61 PJ-NET ORGANIZER O WNSER'S MANUAL ENGLISH 5 Chapter 5 Use of Serial Port Describes controlling the external equipment connected with the RS-232C port.
62 Chapter 5 Use of Serial Port This product provides a serial control port (RS-232C) to control the e xternal equipment through the serial cable. This function allows you to control the external equi.
63 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH *2 The reser ved port numbers are ht tp (80), f tp (21), SNMP (25), POP3 (1 1 0) etc. The port num- ber 1 00 00 is reser ved to control the projector through the LAN port. ✐ Ex clusive driv er sof t ware for control of the e xternal equipment is required.
64 Chapter 5 Use of Serial Port Example 2 Controlling a projector not provided with the network function through network. Contr ol examples Example 1 Co ntr ollin g A V e quipment through net work. PC5 Playbac k D VD D VD Player Video/Audio PJ2 RS-232C serial cable PC5 T ur n on the PJ1.
65 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Example 3 Co ntr ollin g the projector wi th the serial co ntroller through the ser ial por t ( RS - 232C ). ✐ Use proper serial cable depending on the connected equipment port specification. Please ref er to "P ort Specification" of the serial port specification of this product ( ☞ p.
66 Chapter 5 Use of Serial Port Use of telnet Y ou can control the external equipment connected to the serial port on the Network Unit by using the telnet application* 1 inst alled on y our computer . The follo wing is a control e xample of external equipment.
67 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH 3 When communication is established, the word "P ASSW ORD:" appears on the window . T ype the login password (PIN code) for the projector and then press "Enter" ke y on the ke yboard.
68 Chapter 5 Use of Serial Port Control the pr ojector with telnet T his p rod uc t al lo ws yo u t o c ont ro l t he p roj ec tor by u sin g t he te ln et a p pli c ati on .
69 PJ-NET ORGANIZER O WNSER'S MANUAL ENGLISH Chapter 6 Appendix 6 Examples of connection W eb browser setting T echnical data Q & A.
70 Chapter 6 Appendix Examples of connection Peer-T o-Peer connection Connecting the projector (PJ0 1) to the control computer (PC05) directly . Projector Name: PJ01 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gate way : 0.0.0.0 DNS : 0.
71 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH The gateway (Router) installed in the network Connecting the projector (PJ0 1) to the control computer (PC05) via the gatew ay . T o another network Network Group: 192.168.200.x Network Group: 192.168.10.
72 Chapter 6 Appendix W eb br owser setting This product is designed to enable the projector to be set up and controlled from an Internet web browser . Depending on the pref erence set tings of the web browser , some control functions may not be available.
73 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Examples: OS/Br owsers W indows XP Pr ofessional Internet Explorer v .6.0 ActiveScript setting Sele ct Internet Options menu from T ool menu on the web browser and then selec t Security t ab and clic k Customize Lev el… bu tton.
74 Chapter 6 Appendix Proxy setting Select Inter net Options menu from T ool menu on the web bro wser and then select Connection tab and clic k LAN Settings but ton. Properly set up your web browser's the proxy ser ver set tings according to the local area network environment to whic h the projector is connected.
75 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Web br owser setting Netscape Navigator v .7.0 JavaScript Setting Sele ct Preferenc e menu from Edit menu on the web browser and the n sel ect the it em Ad va n ce d / S cr i pt s & P lu g -i ns i n th e C ate g or y c ol um n.
76 Chapter 6 Appendix Proxy setting Sele ct Preferenc e menu from Edit menu on the web browser and the n sel ect the item Ad vanced / Proxies in the Cate gor y co lumn. P roperly set up your web browser's the p ro x y ser ver set tings acco rding to the lo cal are a netwo rk environment to whic h the projec tor is connec ted.
77 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Product specification Pr oduct specification T ype ....................................... PJ-Net Organizer (Network Unit) LAN interface ........................ Applicant regulation IEEE802.3 (1 0Base-T) IEEE802.
78 Chapter 6 Appendix LAN port specification Port specification Serial port specification Pin No. Signal F unction 1 TX+ T ransfer data (+) 2 TX- T ransfer data (-) 3 RD+ Receiv e data (+) 4 (not used) 5 (not used) 6 RD- Receiv e data (-) 7 (not used) 8 (not used) 1 2 3 4 5 6 7 8 8-pin modular connector (RJ-45) Pin No.
79 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Q&A Installation/Access Q Why doesn’t the setting page appear in my web browser? A F ollowing causes are possib le. Please check them. 1 . The projector does not connect to the network. Chec k LED indicators st at us ( ☞ p.
80 Chapter 6 Appendix 3. Enter the projector ’ s IP address [192.1 68.0.2] at "Address" column on the W eb browser . [Note] Make sure that the pro xy set ting of your web brows - er is set "Not using proxy server" ( ☞ p.7 4, 7 6).
81 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Q How can I install several projectors equipped with the Network Unit? A Install and configure net w ork one by one to av oid the IP address collision eac h other ( ☞ p.22). T o configure the IP address please see item "Network configuration" ( ☞ p.
82 Chapter 6 Appendix Operation Q Why can't I change the controls in the setting page with web browser? A Please make sure the projector is turned on. If it is in the st andb y mode, the set- ting is not ef f ective to the projector . T o control the projector with a web bro wser , the projector must be in the pow ered-on condition.
83 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Q&A Q Why am I not receiving E-mail alert messages? A Mak e sure that the registered E-mail address and SMTP server address are correct. If the SMTP ser v er is located in your LAN (Local Area network), the address should be set to the SMTP ser v er in your LAN.
84 Chapter 6 Appendix Q Can I update the firmware of the Network Unit? A It is possible to update the firmware through the network. It is required to hav e a special tool for the updating .
85 PJ-NET ORGANIZER O WNER'S MANUAL ENGLISH Q&A Q What are the rules for IP address assignment? A If the net w ork is constructed with TCP/IP protocol, a unique IP address is required for eac h piece of network equipment. The following are basic rules of the assignment.
Printed in J apan 1AA6P1P5006-- (IDZG) SANY O Electric Co., Ltd..
Een belangrijk punt na aankoop van elk apparaat Sanyo POA-PN40 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sanyo POA-PN40 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sanyo POA-PN40 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sanyo POA-PN40 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sanyo POA-PN40 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sanyo POA-PN40 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sanyo POA-PN40 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sanyo POA-PN40 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
