Gebruiksaanwijzing /service van het product SO-WIN-KF3AC van de fabrikant Sanyo
Ga naar pagina of 144
Netw ork Set-up and Op er ation F or W indow s W ired and W ireless Setting Pr ojector Set-up and Operation Network Captur e Network V iewer Moderator F unc tion Owner ’ s Manual This is the manual for the Network function. Read this manual thoroughly to operate the Network function.
2 C ompliance F or Canadian Users This Class B digital apparatus complies with C anadian ICES-003. Cet apparei numérique de la classe B est conf orme à la norme NMB-003 du Canada. FC C W arning Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
3 The CE Mark is a Directive conformity mark of the European Community (EC). The Alert Mark is a Directive conformity mark of the European Community . Engl ish H er eby, SA NYO El ec t ric Co.
4 Safety instruc tions Caution about Radio W ave This unit operates in 2.4 GH z band, the same frequenc y band used for industrial, scientific, and medical equipment (such as pacemaker), as well as amateur r adio stations. Please read “Safety Instruc tions” section and make sure the following cautions.
5 T able of c onten ts Compliance ......................................................................................................................................................... 2 Safety instructions .........................................
6 How to use the setting page ..................................................................................................................... 46 Initial setting ....................................................................................
7 When operating the projector via the networks, computers should meet the operating environment below . Required opera ting envir onment for c omputers Operating en vironment and c onfigura tion OS M.
8 Network specifications of the pr ojector LAN T erminal Wireless LAN Compliance Data communication speed 100Base-TX (100Mbps)/10Base-T (10Mbps) Protoc ol TCP/IP Interface IEEE802.11b/g Communication Mode AdHoc, Infrastructure Data T ransfer Speed 1/2/5.
9 Chapter 1 9 This chapter describes the features, the mechanism, and connection procedures of the LAN. 1. About LAN func tions.
10 Chapte r 1 Abo ut L AN fu nc tions LAN func tions and the featur es This product is loaded with a LAN network function which enables you to project an image on the computer through a pr ojector via Network with dedicated software. With the software, y ou can also manipulate the projecting image and the projector .
11 An example of the c onnec tion The illustration below show s an example of the projection via the LAN. Y ou can project the image on Computer (1) ( Wired LAN connection), or Computer (2) ( Wireless LAN connection) through the selected projector . 0.
12 Chapte r 1 Abo ut L AN fu nc tions ■ Wireless LAN, Infrastructure Communica tion Mode Access point Computer (1) Wireless communica tion mode corresponded computer: Infrastructure ■ Wireless LAN, A dHoc Communication Mode Communication mode between Wireless LAN equipment.
13 ■ Wired LAN C ommunication Mode Communicate via the LAN line . Computer(1) Computer(2) Computer (3) ✳ Operate the computer mouse with the r emote contr ol. When the projector ’ s remote control employs mouse operating func tion, you can operate the computer by the remote control which is provided with the projector .
14 Chapte r 1 Abo ut L AN fu nc tions.
15 Chapter 15 This chapter describes how to install the Network Capture 5 software and how to set up the networks . 2 2. Setup procedures.
16 Chapte r 2 Setu p pro cedure s T o use the projector via the networks, follow the setup pr ocedures below . STEP 1 Install the soft ware on c omputers. Install the sof tware recorded in CD-ROM on each computer which will be operated. Read following pages of this chapter to install .
17 Installing the soft ware It is requir ed to install the sof tware into your computer to use the Network Captur e function . Please install the software as follows. Note: T o install the software into the computer with Windows 2000, Windows XP or Window s Vista, you should logon as administrator .
18 Chapte r 2 Setu p pro cedure s As the "License Agreemen t" will appear , read contents carefully and click Y es button if you agree to the license agreement t o proceed with installing. During the installation, following window ma y appear , click Continue A nyway button.
19 Installed soft ware The following 3 softwares are installed on y our computer . ● Network Capture 5: Captures the displayed image and the sound of the computer and ser ves them to the projector via the network.
20 Chapte r 2 Setu p pro cedure s F ile Con verter 2 installation 1 Set the supplied Network Viewer & Capture 5 CD- ROM into the CD-ROM drive of your computer .
21 Chapter 21 3. Names and functions of the operation screen This chapter describes the functions of each par t of the operation screen. 3.
22 Chapte r 3 Nam es and f unc tio ns of the o pe rating scre en T urn on the projector and select either “ Wired” or “ Wireless” from the input menu of the projector . The “Please wait... ” message will be displayed on the screen. After shor t time, the network connection standby display screen will appear as below .
23 This software is to project the computer screen via the networks . Select " All Pr ograms" from the start menu --> Network V iewer & Capture 5" --> "Network Capture 5" , then follo wing screen will appear . Then the pr ogram will start.
24 Chapte r 3 Nam es and f unc tio ns of the o pe rating scre en r Start communication button Enter the Communication mode, and then , the capture edit window starts. The selected projector shows the capture edit window . t Start real time capture button Capture (Project) the computer screen in real time.
25 Chapter 25 4 4. Wired LAN configur ations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment.
26 Chapte r 4 Wire d L AN conf igu rations SD Setting Procedur e Setting procedures and cont ents differ depending on the LAN installation location. When installing, consult y our system administrator to set up the LAN appr opriately . Connect the LAN cable to the LAN connection terminal of the projector .
27 4. Press SELECT button. LAN setting screen will appear and selec ted LAN settings will be displayed . Adjust each item to the setting environment. C onsult your system administra tor about the detailed settings. Adjust the figures with the Point ed buttons and move among the items with the Point 7 8 buttons.
28 Chapte r 4 Wire d L AN conf igu rations Network Capture screen Confirming the oper ation Confirm that the projector has connected to the LAN properly . 1. Activate “Network Capture 5” which is installed into the computer connected to the LAN . 2.
29 W h e n s et u p th e pr oj ec to r in t he l oc at io n se pa r a t ed b y th e r o u t e r a n d t h e s e g me nt i s di ff e r en t; Projector will not be found nor displayed. I n that case, the projector needs to be searched directly by the IP address.
30 Chapte r 4 Wire d L AN conf igu rations Network inf ormation The Network PIN code is to restrict the access from the netw orks to the projector . After setting the Network PIN code, you need t o enter it to operate the pr ojector via the networks. 1.
31 W ired LAN factor y default settings Wired LAN factory default settings Paramet er SELECTED LAN LAN1 LAN2 LAN3 IP ADDRESS 169.254.100.100 192.168.100.100 192.168.100.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GA TEW A Y ADDRESS 255.255.
32 Chapte r 4 Wire d L AN conf igu rations.
33 Chapter 33 Th i s c h ap t e r d e sc r i b e s t he p r e pa r a t io n f o r Wi re l e s s LAN setting with projectors and how to set the LAN environment. This projector contains the Wireless LAN module. The setting procedures and configurations differ depending on the LAN installation location.
34 Chapte r 5 Wire less L AN conf ig uratio ns Setting procedures 1. Turn on the projector and select “Wireless ” from the input menu of the projector . The “Please wait... ” message will be displayed on the screen. After shor t time, the network connection standby display screen will appear .
35 4. Press SELEC T button. LAN setting screen will appear and the selected LAN settings will be displayed. Adjust each item to the setting environment. Consult your system administrator for the detailed settings. Adjust the figures with the Point ed buttons and move among the items with the Point 7 8 buttons.
36 Chapte r 5 Wire less L AN conf ig uratio ns Configuring security with the pr ojector Configure security with the projector by follo wing the steps below . After configuring the network in “5. Wireless LAN Configurations ” (p.33-42), select “Next ” in the LAN setting screen and press SELEC T button.
37 Use of security type "WEP" 1. Use the Poin t ed buttons to select "WEP" securit y type. 2. Select “WEP Key index” . Use the Point ed buttons to choose the HEX or ASCII key. The four (#1–#4) kinds of WEP keys can be configured.
38 Chapte r 5 Wire less L AN conf ig uratio ns Use of security type "WP A-PSK" , " WP A2-PSK" 1. Use the Point ed buttons to select " WP A-PSK" secur ity type. WEP secur ity setting fields are grayed out. 2. Select “Next ” and press SELECT button.
39 Error Screen With this setting, y ou do not need any complicated LAN setting pr ocedures. The network type will be AdHoc mode. CAUTION: This function can be used only when logged in by Administrative right with Windows XP and Windows Vista, and cannot be used with Windows 2000.
40 Chapte r 5 Wire less L AN conf ig uratio ns Computer en vironment and Wireless LAN connection; Wireless LAN with Wireless Easy setting connection will be made via AdHoc mode. F or setting contents, refer to “Wireless LAN factor y default settings” (p.
41 WIRELESS indicator display WIRELESS indicator displa y When the wireless LAN configuration is set up correctly and the wireless communication is established with the access-point or the computer in the network, the WIRELESS indicator on the front panel lights up.
42 Chapte r 5 Wire less L AN conf ig uratio ns W ireless LAN factor y default settings F actory default settings for LAN4, LAN5, and SIMPLE as follows. Setting Items Selected LAN LAN4 LAN5 SIMPLE IP ADDRESS 169.254.100.100 192.168.100.100 169.254. * .
43 Chapter 43 Describes basic operation and settings below by using the web brow ser . • Initial setting Setup the basic setting such as Projector name, Network PIN code, Time setting, etc. • Network setting Configure Wired/Wireless LAN en vironment.
44 Chapte r 6 Basic s et ting a nd op eratio n 1. T ur n on the projector . 2. Star t up the Network Capture 5. The Network Capture 5 searches projectors in the network and lists up the IP address or projector name of the projector on the Network Pr ojector List.
45 Display of main setting page The following main setting page will be displayed depending on your display mode selection. Perform various kinds of settings through this page.
46 Chapte r 6 Basic s et ting a nd op eratio n The network view er function in the Light mode has following limitations; - Cannot select the program or folder f or the display .
47 T ex t box setting Enter the number or text and then click Set button. or Change a value with s o r t button and then click Set button. The value changes quick ly when s or t button is kept pressing. Pull-down menu setting S e l e c t a n i t e m w i t h p u l l - d o w n menu button and then click S e t button.
48 Chapte r 6 Basic s et ting a nd op eratio n Initial setting After installing the projector , per form the following basic initial setting. Click Initial Setting on the main menu to display the initial setting page. Item Description Language .......
49 Netw ork PIN code setting T h i s i s t o s e t t h e N e t w o r k P I N c o d e t o r e s t r i c t t h e a c c e s s f ro m a n unauthorized person through the network. Enter a 4- digit number as the Network PIN code onto the text box and click Set button.
50 Chapte r 6 Basic s et ting a nd op eratio n Date and time setting NTP is abbreviated expressions of Network Time Protoc ol. It is a protocol to acquire the exact current time via the network. This projector acquires the current time from the NTP ser ver and update the time in the network module.
51 Network c onfigura tion Click Network on the main menu. The follo wing setting page is displayed. Set up the projector's network environment on this Setting sub menu.
52 Chapte r 6 Basic s et ting a nd op eratio n 2. Sel ec t eithe r "Manu al" or "DHC P" from IP configuration pul l down menu. When "DHCP" is selected, IP address, Subnet mask, Default Gateway, DNS are automat ically configured by DHCP func tion.
53 Configuring wir eless LAN setting and security setting Configure the wireless LAN setting and security setting for LAN4 and LAN5. Configuring wireless LAN setting 1. Click page [2] of setting pages. Follo wing wireless LAN setting can be done. After completing the configuration, press Set button.
54 Chapte r 6 Basic s et ting a nd op eratio n Configuring wireless LAN security setting Click page [3] of setting pages. F ollowing wireless LAN security setting can be done. After completing the configuration, press Set button. Item Description Network security .
55 E-mail setting This product has an E-mail function which can send an aler t message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail Setting on the main menu and follo w the below steps.
56 Chapte r 6 Basic s et ting a nd op eratio n 2 Registering and deleting E-mail addresses Click " Add E-mail address" and type the E-mail address onto the text box and click Set button. T o check the registered addresses, click Check/Delete sub menu tab.
57 Examples: T yp e and conten ts of aler t mail When the projector has an abnormality, the following aler t messages are sent to the register ed E-mail address depending on your selected condition. Administrator or user can take an efficient action quickly by receiving this message.
58 Chapte r 6 Basic s et ting a nd op eratio n ✐ R epla ce it with a new l amp immedia tely a nd re set t he l amp c ounter. If the proj ecto r is used w itho ut re s et t i ng th e la mp co u nt e r, th e a l e r t ma i l i s s e nt to us e rs in eve r y p ow er - o n of t h e p r oj e c t or.
59 ✐ The SNMP agent provided with this product is based upon MIB-2 defined by RFC1213. F or private MIB information, ref er to file "Mibinfo/XUPjNet.mib" in the CD-ROM. SNMP setting This product provides a SNMP (Simple Network Management Protocol) agent function.
60 Chapte r 6 Basic s et ting a nd op eratio n Item Description Community name ........... Enter community name to send "T rap" . Default name is "public" . T rap address ............ Enter IP address of the SNMP manager comput er to receive "T rap" .
61 ✐ Up to 99,999 hours can be set for the time setting. ✐ I f c on d i ti o n " W h e n Au t o P l ay is f a i le d " i s ch ec k e d, th e t ra p is s e n t w h en th e e r ro r oc cu r s d u r in g th e a u to di sp l ay operation using with the network viewer function ( + p.
62 Chapte r 6 Basic s et ting a nd op eratio n.
63 Chapter 63 Describes controlling and setting of the projector by using the web brow ser . 7. Controlling the pro jector 7.
64 Chapte r 7 Control ling t he pro jec tor P ow er contr ol and status check Click Po wer & Status on the main menu. The control page will be display ed. By clic ki ng ON or Standby butto n o n the page, the power of the proje ct or can be controlled.
65 About projector condition Status Description Normal ..................................................................Projector is operating normally . P owe r ma nagem ent in o pera tion ...................... Power management is oper ating Lamp failure.
66 Chapte r 7 Control ling t he pro jec tor Con trols Click Co n t r o l on the main menu. The setting method differs depending on the contents of the page. Click on the page number to change pages and selec t desired setting items. ✐ Please see the owner's manual of the projector to have the further informa- tion of each control item.
67 Sy stem This functi on is to selec t the s ystem of si gnal input to th e p rojecto r . The available system mode are listed on the pull-down menu button according to the input signal. Selec t a system and then click Set button. A vailable selection at the RGB(PC analog) input Item Description XGA1 .
68 Chapte r 7 Control ling t he pro jec tor Item Description Contrast.....................A djusts picture contrast Brightness ................ Adjusts picture brightness Color ...........................Adjusts picture color saturation Tint .........
69 Sound This func tion is to adjust the sound of the projector . The values in the text box represent the current control value or status . Item Description Volume ...................... Adjusts the sound volume from the speakers. Mute ..............
70 Chapte r 7 Control ling t he pro jec tor PC adjustment Click P C A d j . o n t h e m a in m e n u . T h i s f u n c t i o n i s t o a d j u s t t h e s i g n a l f r o m t h e co mp u te r co nn e c te d to th e pro j e c to r to ob ta i n th e pro p er pi c t u re im a ge on t he screen.
71 Setting up the projector Click S etting on the main menu. This function is to set up the projec tor . Selec t the sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting. Item Description Screen ........................
72 Chapte r 7 Control ling t he pro jec tor Item Description Language ................. Sets the language display of projector's on-screen display menu. Auto setup ............... Executes the Auto PC Adj, and A uto Keystone function below according t o the each setting after clicking Star t button.
73 Item Description F actor y default ................ Sets all of the projector control items to the factory default setting except the f ollowing items. Lamp Corres. Value , P J time, Filter time , PIN code lock and Logo PIN code lock. P- TIMER ....
74 Chapte r 7 Control ling t he pro jec tor How to set the timer 1 Set a day or date T o set the timer event at the same time everyday or ev ery week, Select day entry with radio button and then selec t desired day from the pull-down menu button.
75 2 Set an execute time T ype the time with (Hour:Minute) and 24 hours format. Ex.: T ype [18:25] if you specify [PM 6 o’ clock and 25 minutes]. 3 Select a n event action Select an event action from the pull-down menu. Even t Action ON ............
76 Chapte r 7 Control ling t he pro jec tor Notes on timer setting ✐ Up to 10 timer events can be registered. Timer events always operate according to the nex t valid event depending on the projector's power status.
77 Projector informa tion This page is to display the basic information of the projector status. Click Information on the main menu. Items Description Input ...........................Displays selected input and source. System .......................Displays selected signal system.
78 Chapte r 7 Control ling t he pro jec tor Ico n di sp lay/ b ac kg ro un d Sta tus White-Y ellow/Blue L amp o n (No rm al) White-Y ellow/Red L amp o n (L amp i s be ing u se d over a s pe ci f ie d .
79 Multi-control Con trolling and setting the multi-projectors When you install multiple projectors in the network, you can control and set up them together . Click Multi Control on the main menu to display the con trol page. Note: T o control the multiple projectors, each projector must be set the same Network PIN code .
80 Chapte r 7 Control ling t he pro jec tor Start/stop the multi control T o star t or stop controlling the multi-projectors, click Multi control setting menu and select ON or OFF . Multi control setting OFF ..........Stops multi control function ON .
81 Register the projector T o use the multi contr ol function, regist er the IP address of the projector you intend to contro l. Click Pj regi strati on sub menu tab and set the IP addres s, Mem o and Mul ti con trol item, t hen clic k Set but ton.
82 Chapte r 7 Control ling t he pro jec tor Status I f s o m e o f t h e r e g i s t e r e d p r o j e c t o r s a r e d i s a b l e d b y some reasons (such as disconnecting the power source, disconnecting the LAN cable, disconnecting from the network), control changes will continue to be effective for the projectors that are still active.
83 Check & Change page in the light mode Follo wing functions in the "Check & Change" page are not available in the light mode. - Changing the control mode .
84 Chapte r 7 Control ling t he pro jec tor V iewer aut o setting all together "Viewer auto displ ay" can b e s et all to gethe r . S et "ON" the m ulti control setting and select [3] Auto display from Viewer sub menu ( s e l e c t e d b y ‘ M u l t i - co n t r o l ’ - “ N e t w o r k V i e we r ” m e n u ) .
85 Chapter 85 Ne t w o r k C a p tu r e is a f u n c t i o n t o di s p l ay th e s cr e e n image and reproduce the sound of the computer via the network.
86 Chapte r 8 Net wo rk capt ure fu nct ions Start up the Network Capture 5 T o star t up the Network Capture 5, click "Net work Capture 5" from "Star t" - " All Pr ograms" - "Network Viewer & Capture 5" menu.
87 Commands on the task bar When the Network Viewer & Capture 5 icon on the task bar is clicked, the popup menu will appear. It provides accor ding to the operating modes as shown in the table below . Items Description Start / T erminate capture .
88 Chapte r 8 Net wo rk capt ure fu nct ions Par ameter set up Cl ick P arameter set u p but ton an d s et up the pa r am ete rs on th e P ar ame ter se tup wi ndo w . Items Description Connection setting Capture port ............... Sets the capture por t no.
89 Using the Real Time Captur e Th is is a fun c t io n to pro je c t the s cre e n ima g e an d r ep ro du ce t he so un d of th e c om pu te r by the p ro je c to r i n re a l t i m e .
90 Chapte r 8 Net wo rk capt ure fu nct ions [1] Con trol by the c omputer PC1 PC4 PC3 PC6 Capture PC5 PC2 PC2 Project this screen image with P J2. * PC provides the Network Capture. PJ2 PJ1 Select input mode to "Network" previously . 1 Start up Network Capture 5.
91 Select "Network" as input mode previously. 1 Acce ss to the co nt rol pa ge of th e p ro je ct or by usi ng th e web browser . From the Network menu, click Captur e tab to display the setting page. 2 Select the computer number from the pull-down menu button of "Connecting PC" and click Start button.
92 Chapte r 8 Net wo rk capt ure fu nct ions PC4 PC3 PC6 Capture PC5 PC2 PC1 PJ2 PJ1 * PC provides the Network Capture. Project a screen image of PC1 with P J2. * S t a r t c a p t u r i n g o f t h e P C 1 f r o m t h e projector P J2. [3] Con trol by the projector Sele ct "N etwo rk" a s i nput mod e pr evi ousl y .
93 Example of advanced use Displays the presentation data stored in the computer by using the wireless mouse func tion from the projector . 1 Start capturing of the computer PC1 by using the projector . S elect “Network Capture” icon from the menu and select "PC1" and then select "Connect" ( + p.
94 Chapte r 8 Net wo rk capt ure fu nct ions PC2 PC6 Capture PC5 PC1 Capture a screen image of PC5 and make marking with a tool. PJ1 * The Main PC is a computer which started using communication func tion, and ser ves own computer screen captured image to the Sub PC.
95 Settings before using the Networ k Communication T o use the Network Communication, the capture setting of the projector must be set either [1] or [2] as described below . [1] Projector searches all the a vailable subject computers in the network automatically .
96 Chapte r 8 Net wo rk capt ure fu nct ions Description of capture editing window Start Network Capture 5 and select the projector(s) on the projector list on the application window and click Communication Star t button. The application window will disappear and the capture editing window will appear on the computer screen as below .
97 T ool bar button names T h e fo ll ow i ng co m m a n d s a r e a s s i gn e d to t h e to o l ba r bu t to ns . Fo r e a c h o p e r a t i on , re f e r t o t h e description of the item "Menu tree" .
98 Chapte r 8 Net wo rk capt ure fu nct ions How to ac quire and release the editing authority T o edit the capture image, each computer needs to acquire the authorit y respec tively . T o acquire the authority, click " : Authority" button on the standard tool bar and then edit the capture image.
99 Setting of the drawing tool attribute When clicking " :Attribute" button on the standard tool bar , the following window will appear . This window appears only if the pencil or eraser tool is selected. Select a color on the color pallet appeared by clicking here.
100 Chapte r 8 Net wo rk capt ure fu nct ions Letter attribute setting The font attribute setting window appears when click ing " :Attribute" button on the standard tool bar with the letter frame tool selected, or click ing Letter attribute button on the letter input dialog window described the above .
101 Network C ommunication operation and change of stat e Network Communication can be used under the environment which one or more computers are connected to the projector via the network. Prepar ation Start up the Network Capture 5 sof tware on the subjec t computer .
102 Chapte r 8 Net wo rk capt ure fu nct ions Ex ecuting the forcing mode The network capture setting of the web page provides a forcing executing command.
103 Moderator function Thi s fun c ti on is us ef ul for a mod er ato r or a t ea ch er to con du c t a m ee ti ng or a c l as s, whe re all th e participants including the moderator (teacher) are assigned a computer , to project images from each participant ’ s computer .
104 Chapte r 8 Net wo rk capt ure fu nct ions Prepar ation f or using the moderator function First, foll ow the proce dure in “2. Se tup Proce dure” ➔ “Step 1–3” (p .
105 Using the moder ator function Moderator opera tion 1. A m od er ato r star ts up the Net wo rk Cap tu re 5. On the ap pli ca ti on win do w, se le ct a proj ec to r on the projec tor list to use and then click Moderator registration button. The mode of the application window changes from "Normal mode" to "Moderat or mode" .
106 Chapte r 8 Net wo rk capt ure fu nct ions Unregister moder ator status 1. S elect the projector(s) which is registered as a moderator from the moderator mode application window .
107 Error messages Cause and corresponding Set up the parameter . Error when the communication is execut ed. The parameter setting (host name, capture port) has not been set. ➔ Check parameter setting ( + p .88) It has not been registered to P J as a group .
108 Chapte r 8 Net wo rk capt ure fu nct ions.
109 Chapter 109 Network Viewer is a func tion to display the image data stored in the file servers by the projector through the network. Describes the file conver ter so ftware File Converter 1, File C onverter 2, the program crea tor software Program Editor , and how to use Network V iewer .
110 Chapte r 9 Net wo rk Vie wer f unc tio ns Crea ting the available da ta [Network View er 5] The image available with this projec tor is the JPEG format (.
111 Creating the a vailable data 1 Select a folder in which the image files are stored by the explor er window . The preview images of the available image data (JPEG file, Bitmap file, power point file) in the selected folder are display ed on the preview window .
112 Chapte r 9 Net wo rk Vie wer f unc tio ns 2 When converting each file, selec t a preview image first and then click Con vert each file . ✐ T o selec t t wo or more files at once, press and hold "Shift" key or "Ctrl" key and then click the preview images.
113 Setting of output destination and con version mode When clicking Change button on the confirmation window in the step 3 on the previous page, following option setting window appears. Output destination Select either F older o r F T P s e r v e r as the output destination of the conv erted files.
114 Chapte r 9 Net wo rk Vie wer f unc tio ns ✐ The above proc edure may differ in each computer en vironment and applications. ✐ The image data over 2 M byt es cannot be projected with Network viewer 5.
115 Crea ting a program file [P rogram Edit or] Network View er 5 (Progr am Editor) is a tool to make a program file which specifies the display order of t h e i m a g e s an d it s fi l e pa t h in th e f il e s er ve r (F T P se r ve r ) .
116 Chapte r 9 Net wo rk Vie wer f unc tio ns 4 Click New button. 5 Enter a program name and click A dd button. 6 The folder selec tion window appears and select a folder in which the JPEG data are stored and then click Add button t o register int o the folder lists.
117 Setting up the display order and time of the images In the default setting, the display order of the images is the same as ASCII code order of the file name. T o change the display order or to set up the display time , take the following proc edures.
118 Chapte r 9 Net wo rk Vie wer f unc tio ns 3 T o change the display order , select* 1 files and then click UP or DOWN button on the m enu bar to move them onto your desired place, or selec t files and then drag and drop them onto your desired place with mouse.
119 Example of the creat ed program selection Use th e w eb brows er to acce ss to the con tro l p ag e of t he pro je ct or. Cl ick " Vie wer " o f the Ne two rk me nu o n t h e web pa ge , the n co nn e c t t o th e FTP se r ver an d se le c t th e pro gr am na m e whi c h was made at previous section.
120 Chapte r 9 Net wo rk Vie wer f unc tio ns Select "Network" for input mode previously . 1 Access to the c ontrol page on the projector by using the w eb browser .
121 2 Setup the setting page [1] of the Visual display . 3 Setup the setting page [2] of the S election Display. Click Se l e c t after selec ting the display object from the pull- down menu "Folder Selec tion" or "Prog ram Selection" .
122 Chapte r 9 Net wo rk Vie wer f unc tio ns ✐ Up to 1000 images can be displayed. ✐ When "fold er se lectio n" is se lecte d, i mage s pl aced at the f irst dir ectory in th e se lecte d fo lder are dis play ed.
123 1. Cl i c k S ta r t button to start the auto-display. The image in the selec ted folder or program is displayed on the projector's screen. The web browser opens another window and displays the preview images on the Auto C ontrol window sequentially .
124 Chapte r 9 Net wo rk Vie wer f unc tio ns ✐ W h e n t h e f i l e e rr o r o c c u r s d u r i ng t h e a ut o - d i s p l a y, y o u m a y ha v e t h e al e r t E- ma i l m es s a ge . Fo r f u r t h er information, please see the item "3 Option selection for sending alert mail" ( + pp.
125 ✐ I n the automatic displaying mode [Auto], when the left-click on the remote control is pressed, automatic displaying stops and the manual displaying mode is set. When the right-click is pressed, automatic displa ying restarts. ✐ The image data used for this function is the program or folder that the Network Viewer function used last time.
126 Chapte r 9 Net wo rk Vie wer f unc tio ns.
127 Chapter 127 Use of telnet W eb brow ser setting Fir ewall setting T roubleshooting T erminology 10. Appendix 10.
128 Chapte r 10 Append ix Use of telnet Y ou can control the projector by using the telnet application *1 installed on your computer . Normally, the telnet application is available on y our computer . * The telnet 10000 port is used to control the projector .
129 4. T ype the commands, ref er to below table, t o control the projector and then press "Ent er" key for termination. F or example, type "C00" which is a command to turn on the projector , and press "Enter" key . Confirm the projector is turning on.
130 Chapte r 10 Append ix W eb brow ser setting This prod uc t i s desig ned to enabl e the projec to r t o b e set up a nd contro lle d from an I nte rne t we b browser . Depending on the preference settings of the web browser , some control functions may not be available.
131 Examples: OS/Brow sers W indows XP P rof essional Internet Explorer v .6.0 ActiveScript setting Select Internet Options from T ools menu on the web browser and then select Securit y tab and click Customize Lev el… button.
132 Chapte r 10 Append ix Pro x y setting Selec t Internet Options from T ools menu on the web browser and then selec t Connection tab and click LAN Settings button. Properly set up your web browser's the proxy ser ver settings according to the local area network environmen t to which the projector is connected.
133 Netscape Navigator v .7.0 JavaScript Setting S e l e c t P r e f e r e n c e f r o m E d i t m e n u o n t h e w e b b r o w s e r a n d then select the item Advanced/ Scripts & Plugins i n t h e C a t e g o r y col umn . Mak e sure th at the Enable JavaScript for Na vigator is checked.
134 Chapte r 10 Append ix Pro x y setting Select Preferenc e from Edit menu on the web browser and then select the item Advanced/ Pro xies in the Category column. Properly set up your web browser's the proxy ser ver settings according t o the local area network environment t o which the projector is connected.
135 F irewall setting If you use Windows XP SP2 or Windows Vista and using Network Capture 5, you may see the Windows security warning dialog as below . In that case, click "Cancel the block" button on the dialog to enable the function of Network Capture 5.
136 Chapte r 10 Append ix If you have any trouble in setup or operation of the projector, refer to the troubleshooting items and check the relevant matters described .
137 Infrastructure Mode: When selecting LAN5 (factor y default setting) Check each item below in the Wireless Setting menu of the projector as follows: *IP Address .............................. No setting is required. *Sub net .......................
138 Chapte r 10 Append ix ■ Although the connection bet ween PC and the projec tor is established, images are not pro- jected on the screen. Make sure Wireless/W ired is selected from the Input source menu of the pr ojector . ■ Cannot be turned on/off with the web br owser .
139 T roubleshooting ■ Speed of playing back images are v ery slow. When connecting on AdHoc mode, check which Wireless channel you are using . If the computer using the same channel as yours is existing closely, the networking speed may be reduced or the communication unstable.
140 Chapte r 10 Append ix ■ What kind of image formats can I con vert? The File Converter 1 makes it available to convert into the JPEG format from the following image formats. Bitmap format (.bmp ) JPEG format (.jpeg .jpg) Microsoft power point f ormat (.
141 ■ Sometime I have the incorr ect images converted by the F ile Con verter 2? T ry to change the mode to "Disable" on "Document options" - "Print optimization" item on the "Network View er 5 (Driver) Advance Options" in the Net work V iewer 5 (FileConverter 2) Printer driver setting.
142 Chapte r 10 Append ix DHCP server (Dynamic Host Configuration Pr otocol) It is necessar y to set an IP address for each computer or equivalent equipment when a network is established by TCP/IP . If there exists DHCP server on the network, it will assign IP addresses to client computers ever y time they request it.
143 T erminology.
SO-WIN-KF3A C NET WORK OWNER'S MANU AL FOR WINDOWS SANY O Elec tric Co ., Ltd..
Een belangrijk punt na aankoop van elk apparaat Sanyo SO-WIN-KF3AC (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sanyo SO-WIN-KF3AC heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sanyo SO-WIN-KF3AC vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sanyo SO-WIN-KF3AC leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sanyo SO-WIN-KF3AC krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sanyo SO-WIN-KF3AC bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sanyo SO-WIN-KF3AC kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sanyo SO-WIN-KF3AC . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
