Gebruiksaanwijzing /service van het product TS-EC1279U-RP van de fabrikant Seagate
Ga naar pagina of 59
.
.
DIS CLAIMER In no event shall t he liability of QN AP System s, Inc. (QNAP) ex ceed the price paid for the product from direct, indirect, special, inci dental, or consequential softwa re, or its documentation.
Regulat ory Notice FCC STATEMENT This equipment has been tested and found to comply with the limits f or a Class B digital device, pursuant to P art 15 of FCC Rules. These limits are designed to provide reasonable protection against h armful interferen ce in a residential inst allation.
Symbols in this document Wa r n i n g T his icon indicates the instructions must be strictly followed. F ailure to do so could result in injury to huma n body or death. Caution This icon indicates th e action may lead to disk clearance or loss OR failure to follow the instruction s could result in data damage, disk damage, or product damage.
Table of Contents T able of Contents .............................................................................................................. .................................... 6 Safety W arnings ...............................................
Safety Warnings 1. The NAS can oper ate normally in the temp erature of 0º C–40ºC a nd relative humidity of 0%–95%. Please make sure th e environment is well-ventilated. 2. The power cord and devices co nnected to the NAS must pro vide correct supply voltage (100W , 90–264V).
Chapter 1. CPU and Memory Specifications Caution: Modifying the hardware, soft ware, or firmware of the QN AP products will void the warranty . QNAP is not responsible fo r any form of damage or loss of data caused by modding the QNAP products.
System TS-112 TS-212 CPU Marvell 1.2GHz Marvell 1.2GHz Memory 256MB DDR2 256MB DDR2 Flash 16MB 16MB CPU replaceable No No Memory replaceable No No Number of SODIMM slots 0 0 Number of hard drive slots 1 2 System TS-412 TS-412U CPU Marvell 1.2GHz Marvell 1.
.
.
.
.
.
.
.
.
.
.
Chapter 3. USB One Touch C opy System Number of seconds (press the one touch c opy button to trigger data copy) All NAS models 0.5 sec Data Copy by the Front USB Por t The NAS supports insta nt data copy backup from the external USB devic e to the NAS or the other way round by the front one to uch copy button.
Chapter 4. LED and Alarm Buzzer Specifications The LED indicators of the NA S indicate the sy stem status and inform ation. When the NAS is turned on, check the following ite ms to make sure the sy stem status is normal.
Or ange The NAS is connected to the network LAN Orange Flashes orange The NAS is being accessed from the network Green The 10GbE network expansio n card is installed 10 GbE 1 Green Off No 10GbE networ.
Beep alarm: All NAS models The beep alarm can be disabled in “Sys tem Ad ministra tion” > “Hardware Settings” . Beep sound Number of Times Description Short beep (0.5 sec) 1 1. The NAS is starting up 2. The NAS is being shut down (software shutdown) 3.
Chapter 5. Upgrade Memory on QNAP Turbo NAS (RAM Module Installation) Warning: The following instructions should only be performed by an authorized and trained technician. Strictly adhere to th e instructions to in stall a RAM module on the NAS.
4. R emove the case cover of the NAS gently . 5. Lift up the Mylar sheet. Lo cate the memory slot. Make sure the slot i s empty . 6. Grasp the e dge of the memory module. A lign the notch o n the gold edge of the module with the notch in the memo ry slot.
8. R otate the memory module tow ards the motherboard unti l the securing clips cl icks into place. 9. Close the case cover and fasten the screws. Connect the power adaptor and cables back to the NAS. 10. T o check that the memory module is recognized by the NA S, power up the NAS and login the web interface as an administra tor .
5.2 TS-879U-RP, TS-1279U- RP, TS-EC879U-RP, TS-EC1279U-RP QNAP pro vides a 2GB DDR3* RAM module an d a 4GB DDR3 EC C** RAM module (optional purchase) for users to upgrade the memory of the NAS. I nsert an extra RAM mod ule on the motherboard of the NAS to upgr ade the memo ry .
2. Hold t he notch at th e edge of the top cover . Remove the top cover in both hands. 3. Release the ejector clips gently by pulling the m out of the sides of the RAM slot.
4. Gr asp the edge of the RAM module. Align the notch on the gold edge of the RAM module with th e notch in the RAM slot. Insert th e RAM module to the RAM slot unt il it cannot go any f urther .
Chapter 6. Network Expansion Card Installation Warning: The following instructions should only be performed by an authorized and trained technician. Strictly adhere to the instruct ions to install a netw ork expansion card on the NAS. F ailure to do so could result in injury to huma n body or death.
Brack et C Network Expansion Card Compatibility Brack et A (X520- T2) Intel ® Ethernet Server Adapter X520- T2 (E10G42B) Brack et B (X520-SR2/X520-DA2) 1. Intel ® Ethernet Server Adapter X520- SR2 (E10G42BFSR) 2. Intel ® Ethernet Server Adapter X520-DA2 (E10G42B TDA) Brack et C (Emu lex) 1.
1. T urn off the NA S. Disconnect the power adaptor , network cable(s), and an y other connectors or cables from the NAS . 2. Before installing the network expansion card, pu t on a n antistatic wrist strap to prevent electrostatic discharge. The crocodile clip should be connected to the ground.
5. Loosen the screws and remove the expansion sl ot cover . 6. Gr asp the edge of the ne twork expansion card. Align the notch on the gold edge of the card with the notch in th e PCIe slot. Insert the network expansi on card to the PCIe slot until it cannot go any further .
7. F asten the screws. 8. Close the case cover and fasten the screws. Connect the power adaptor and cables to the NAS. 9. T o check that the network expansion is reco gnized by the NAS , power up the NAS and login the web interface as an administr ator .
6.2 TS-879U-RP, TS-127 9U-RP 1. T urn off the NA S. Disconnect the power adaptor , network cable(s), and an y other connectors or cables from the NAS . 2. Before installing the network expansion card, pu t on a n antistatic wrist strap to prevent electrostatic discharge.
5. Loosen the screws and remove the cover of slot 1. 6. Gr asp the edge of the expansion card. Alig n the notch on the gold edge of the card with the notch i n the PCIe slot. Insert the network expansion card to the PCIe slot until it cannot go an y further .
7. F asten the screws. 8. Close the case cover and fasten the screws. Connect the power adaptor and cables to the NAS. 9. T o check that the network expansion is reco gnized by the NAS , power up the NAS and login the web interface as an administr ator .
Chapter 7. Hot-swap Hard Drives The QNAP NAS is compatible with 2.5-inch/3.5-inch SA T A hard disk drives from majo r hard disk brands. Fo r the updated hard dr ive compatibility list, please visit http://www .
TS-509 Pro, TS-559 Pro , TS-639 Pro, TS-659 Pro, TS-809 Pro, TS-809U-RP , TS-859 Pro, TS-859U-RP , TS-259 Pro+, TS-459 Pro+, TS-559 Pro+, TS-659 Pro+, TS-859 Pro+, TS-859U-RP+, TS-412, TS-412U, T S-45.
The NA S supports hot -swapping the hard drives when 1 member drive crashes in RAID 1, 1–2 member drives cra sh in RAID 5 or RAID 6. Follow the steps below to hot -swap the hard drive when a member drive fails in a RAID configuration. 1. Login the NAS and check the disk v olume configur ation in “V olume Management” .
Chapter 8. RAID Recovery The QNAP NAS supports exclusive RAID recovery techn ology to recover a failed RAID disk volume from uni ntentional disconnection or r emova l of the hard drives from t he system.
Sta ndard RAID 5 QNAP RAID 5 Standard RAID 6 QNAP RAID 6 Degraded mode N-1 N-1 N-1 & N-2 N-1 & N-2 Re ad only protection (for immediate data backup & hard drive replacement) N/A N-1, bad blocks found in the surviving drives of the arra y .
Chapter 9. Use the LCD Panel This feature is only provided by the NAS models with LCD panels. Please visit http://www .qnap.com for details. The NAS pro vides a handy L CD panel for users to perform di sk configur ation and view the system information.
For example, whe n 5 hard drives installed ar e available on the NAS, the LCD panel shows: C o n f i g . D i s k s ? → R A I D 5 Press the “Select” button to browse mo re options, for example, RAID 6. Press the “Enter” button and th e following message shows.
T o encrypt the disk volume*, select “Y es” wh en the L CD panel shows <Encrypt V olume?>. The default encryption password is “admin” . T o change the password, please login the web-base.
View s ystem information by the LCD panel When the LCD panel shows the server name and IP address, press the “Enter” button to enter the Main Menu. The Main Menu consists of the follow ing items: 1. TCP/IP 2. Physical disk 3. Volume 4. System 5. Shut down 6.
2. Physical disk The following opt ions are available: Disk Info Back to Main Menu The disk info shows the temperature an d the c apacity of the hard drive. D i s k : 1 T e m p : 5 0 ° C S i z e : 2 3 2 G B 3. Vol ume This section shows the disk configuration of the NAS.
4. Syst em This section shows the system temperature an d the rotation speed of the system fan. C P U T e m p : 5 0 ° C S y s T e m p : 5 5 ° C S y s F a n : 8 6 5 R P M 5. Shut down Use this option to turn off the NAS. Press the “Select” button to select “Yes”.
Syst em Messages When the NAS encounters system error, an error message will be shown on the LCD pa nel. Press the “Enter” button to vi ew the message. Press the “Enter” button again to view the next message. S y s t e m E r r o r ! P l s . C h e c k L o g s System Message Description Sys.
Chapter 10. Install Power Supply Unit * This section applies to rackmount NAS models only . The power supply units of TS-809U-RP/859U -RP+/879U-RP/EC879U -RP should only be replaced by an authorized and tr ained technician. 10.1 1U Turbo NAS T he following in structions sh ould only be performed by an authorized and trained technician.
4. F asten the screw tightly . 5. Tu r n o n t h e N A S . Note: T o replace a failed power su pply unit, tu rn off the N AS. Then remove the failed u nit safely and repeat steps 3-5 abov e to install a new power supply unit.
Warning: The NAS supports replacing the red undant power supply unit witho ut turning off the server when redundant power supply mode is enabled. However , users are strongly recommended to turn OFF the NAS before replacing the power supply unit to reduce the risk of electric shock.
3. Unplug the failed power supply . 4. Plug in a new power supply to the NA S. 5. Tu r n o n t h e N A S . 53.
10.3 2U Turbo NAS (except TS-127 9U-RP and TS-EC1279U-RP) T he following in structions sh ould only be performed by an authorized and trained technician. T o replace a failed power supply unit on a 2U T urbo NAS, follow the steps below . 1. T urn off the NAS .
4. Plug in the new power supply to the NA S. 5. F asten the screw on the power su pply in clockwise direction . 6. Tu r n o n t h e N A S . 55.
Enable warning aler t for redundant power supply on the web-based interface: If two power supply units (PSU ) have been inst alled on the NAS and connected to the power sockets, both PSU will supply the power t o the NAS (applied to 1U and 2U models).
The foll owing description applies to 1U NAS models only. (1) Power supply indicators: Green (left) power indicator: Indi cates th e power supply unit is in normal status . R ed (right) power indicator: Indicates the power supply unit is in abnormal statu s.
Technical Support QNAP provides dedicated online support an d c ustomer service via instant messenger . Online Support: ht tp://www.qnap.com MSN: q.support@hotmail .com Skype: qnapskype For u m : http://forum.qn ap.com Technical Support in the USA and Canada: Email: q_supportus@qnap.
GNU GENERAL PUBLIC LICENSE V ersion 3, 29 June 2007 Copyright © 2007 Free Software Found ation, Inc. <http://fsf .org/> Everyone is permitted to copy and distribute verbatim copies of this license document, bu t changing it is not allowed.
Een belangrijk punt na aankoop van elk apparaat Seagate TS-EC1279U-RP (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Seagate TS-EC1279U-RP heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Seagate TS-EC1279U-RP vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Seagate TS-EC1279U-RP leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Seagate TS-EC1279U-RP krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Seagate TS-EC1279U-RP bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Seagate TS-EC1279U-RP kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Seagate TS-EC1279U-RP . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
