Gebruiksaanwijzing /service van het product COMPANION 315.10102 van de fabrikant Sears
Ga naar pagina of 16
Owner's Manual 3/8 in. Single Speed / Reversible CORDLESS DRILL Model No. 315.101020 Save this manual for future reference CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
• Warranty ......................................................................................................................................................... 2 • Introduction and Product Specifications ......................................
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
RULES FOR SAFE OPERATION (Continued) NEVER USE IN AN EXPLOSIVE ATMO- SPHERE. Normal sparking of the motor could ignite flammable liquids, gases, or fumes.
RULES FOR SAFE OPERATION (Continued) m An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and M electric shock. If extension cord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of M plug on charger.
The following recommended accessories are currently available at Sears Retail Stores. • 3/8 in. Chuck (Item No. 9-2975) • Chuck Key (Item No. _-2053) _i WARNING: The use of attachments or accessories not listed might be hazardous. KNOW YOUR DRILL See Figure 1.
WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. _ WARNING: Do not allow familiarity with your drill to make you careless.
REVERSIBLE See Figure 3. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill he(d in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling.
INSTALLING BITS See Figure 6. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 3. • Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use.
_lb WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. DRILLING See Figure 8. _WARNING: Be prepared for binding or bit breakthrough.
CHUCK REMOVAL See Figures 10, 11, and 12. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. • Insert a 5/16 inch or larger allen wrench (hex key wrench) into the chuck of your drill and tighten the chuck jaws securely.
12.
WARNING: When servicing, use only identical replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
14.
COMPANION 3/8 INCH CORDLESS DRILL - MODEL NO. 315.101020 I The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 in. CORDLESS DRILL or when ordering repair I pads.
For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME s" (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 In Canada for all you.
Een belangrijk punt na aankoop van elk apparaat Sears COMPANION 315.10102 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sears COMPANION 315.10102 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sears COMPANION 315.10102 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sears COMPANION 315.10102 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sears COMPANION 315.10102 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sears COMPANION 315.10102 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sears COMPANION 315.10102 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sears COMPANION 315.10102 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
