Gebruiksaanwijzing /service van het product BOOM ROTARY MOWER 2160 van de fabrikant Servis-Rhino
Ga naar pagina of 204
© 201 1 Alamo Group Inc. SER VIS 2160 Published 06/1 1 Part No. 00765708C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.
T o the Owner/Operator/Dealer This Operator's Manual is an integral p art of the safe operation o f this machine and must be maint ained with the implement at a ll times. A Ma nual canister is provided on the implement where this manu al can be properly stored.
In order to r educe accidents and enhance the safe operation of mowers, Alamo Group Ag Division, in cooperation with other industr y manufacturers has develope d the AEM/FEMA Industrial and Ag ricultural Mower Safety Practices video an d guide book.
Alamo Group Ag. Division will provide one (1) AEM Mower Safety Practices Vi deo Please Send Me: VHS Format – AEM/FE MA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Safety V id.
DEALER to CUST OMER Pre-Delivery / Operation Instructions Dealer should inform the Pu rchaser of this product of Warr anty terms, provisions, and procedures that are applicable.
.
T ABLE OF CONTENTS SAFETY SECTION ........ ................................. .......................................................... ........... 1- 1 GENERAL SAFETY INSTRUCTION S AND PRACTICES ........ ................ .................... ........
Blade Bolt Inspection ...... ................ ................ .................... ................ ................ ............... ........ ................ ...... 4-19 DRIVING THE TRACTO R AND IMPLEMENT ....... ................ ................ ..
Safety Section 1-1 © 201 1 Alamo Group Inc. SAFETY SECTION.
SAFETY 2160 07/11 Safety Section 1-2 © 201 1 A lamo Group Inc. SAFETY GENERAL SAFETY INSTRU CTIONS AND PRACTICES A careful operator is the best operator .
SAFETY 2160 07/11 Safety Section 1-3 © 2011 Alamo Group Inc. SAFETY Operator Safety TO A VOID SERI OUS INJUR Y OR DEA TH DO THE FOLLOW ING: • READ, UNDERST AND and FOLLOW Operator's Manual instructions , Warnings and Safety Messages.
SAFETY 2160 07/11 Safety Section 1-4 © 201 1 A lamo Group Inc. SAFETY CRUSHING HAZARDS TO A VOID SERIOU S INJURY OR DEA TH FROM F ALLING OFF TRACTOR, EQUIPMENT RUN OVER, ROLLOVER AND CRUSHING BY F ALLING WING OR IMPLEMENT : • USE ROPS and SEA T BEL T equipped tractors for mowing operations.
SAFETY 2160 07/11 Safety Section 1-5 © 2011 Alamo Group Inc. SAFETY CONNECTING OR DISCONNECTING IMPLEMENT SAFETY TO A VOID SERIOUS INJURY OR DEA TH FROM BEING CRUSHED BY TRACTOR OR IMPLEMENT : WHEN connecting mower head to the bo om : • KEEP BYST ANDERS A W A Y from tractor and mower .
SAFETY 2160 07/11 Safety Section 1-6 © 201 1 A lamo Group Inc. SAFETY THROWN OBJECTS HAZARDS ROT ARY MOWERS CAN THROW OBJECTS 300 FEET OR MORE UNDER ADVERSE CONDITIONS.
SAFETY 2160 07/11 Safety Section 1-7 © 2011 Alamo Group Inc. SAFETY THROWN OBJECTS HA ZARDS (Continued) MOWER OPERA TION: • DO NOT e xceed mower' s rated Cutting Capacity or cut non- vegetative material. • USE ENCLOSED TRACTOR CABS when two or more mowers ar e operating in mowing area.
SAFETY 2160 07/11 Safety Section 1-8 © 201 1 A lamo Group Inc. SAFETY RUN OVER HAZARDS TO A VOID SERIOUS INJUR Y OR DEA TH FROM F A LLING OFF TRACTOR OR EQUIPMENT RUN OVER: • USE ROPS and SEA T BEL T equipped tractors for mowing operations. • KEEP ROPS locked in UP position.
SAFETY 2160 07/11 Safety Section 1-9 © 2011 Alamo Group Inc. SAFETY PTO ENT ANGLEMENT HAZARDS KEEP A W A Y FROM ROT A TING DRIVELINES AND ELEMENTS TO A VOID SERIOUS INJURY OR DEA TH: ST A Y A W A Y and KEEP hands, feet and bod y AWA Y from rot ating bl ades, drivelines and parts until all moving elements ha ve stopped.
SAFETY 2160 07/11 Safety Section 1-10 © 201 1 A lamo Group Inc. SAFETY MOWER BLADE CONT ACT HAZARDS KEEP A W A Y FROM ROT A TING BLADES TO A VOID SERIOUS INJUR Y OR DEA TH FROM BLADE CONT ACT : • S T AY AW AY and KEEP HANDS, FEET and BODY A W A Y from rot ating blades, drivel ines and part s until all moving elements have stopped.
SAFETY 2160 07/11 Safety Section 1-11 © 2011 Alamo Group Inc. SAFETY HIGH PRESSURE OIL LEAK HAZARD TO A VOID SERIOUS INJUR Y OR DEA TH FROM HIGH PRESSURE HYDRAULIC OIL LEAKS PENERA TING SKIN: • DO NOT OPERA TE equipment with oi l or fuel leaks.
SAFETY 2160 07/11 Safety Section 1-12 © 201 1 A lamo Group Inc. SAFETY ELECTRICAL & FIRE HAZARDS TO A VOID SERIOUS INJUR Y OR DEA TH FROM ELECTRICAL CONT ACT WHEN WORKING AROUND ELECTRICAL POWER .
SAFETY 2160 07/11 Safety Section 1-13 © 2011 Alamo Group Inc. SAFETY TRANSPORTING HAZARDS TO A VOID SERIOUS INJUR Y AND DEA T H WHEN TOWING OR TRANSPORTING EQUIPMENT : • KEEP transport speed BELOW 20 mph to maintain control of equipment. • REDUCE SPEED on inclines, on turns and in poor towing conditions.
SAFETY 2160 07/11 Safety Section 1-14 © 201 1 A lamo Group Inc. SAFETY HAZARDS WITH MAINTENANCE OF IMPLEMENT A VOID SERIO US INJUR Y OR DEA TH FROM COMPONENT F AILURE BY KEEPING IMPLEME NT IN GOOD OPERA TING CONDITION IN PERFORMI NG PROPER SERVICE, REP AIRS AND MAINTENANCE.
SAFETY 2160 07/11 Safety Section 1-15 © 2011 Alamo Group Inc. SAFETY PA R T S I N F O R M AT I O N Decal Location NOTE: Rhino supplies safety deca ls on this product to promote safe operation. Damage to the decals may occur while in shipping, us e, or reconditio ning.
SAFETY 2160 07/11 Safety Section 1-16 © 201 1 A lamo Group Inc. SAFETY ITEM P ART NO. QTY . TYPE DESCRIPTION 1. 03200347 1 REFLECT SMV 2. D681 1 INSTRUCT Boom Mower Safety Booklet 3. D644 1 INSTRUCT Blue Dot Decal 4. D645 1 INSTRUCT Red Dot Decal 5. 007760 31 1 ----------- ---- Manual Canist er 6.
SAFETY 2160 07/11 Safety Section 1-17 © 2011 Alamo Group Inc. SAFETY ITEM P ART NO. QTY . TYPE DESCRIPTION 1. D636 1 IMPORT ANT Do Not Operate PT O in OFF 2. D388 1 DANGER Boom Multi-Hazard 3. D630 1 IMPORT ANT Service Hydraulic System 4. D617 1 DANGER Hydraulic Oil Hazard 5.
SAFETY 2160 07/11 Safety Section 1-18 © 201 1 A lamo Group Inc. SAFETY ITEM P ART NO. QTY . LEVEL DESCRIPTION 1. D626 2 W ARNING Thrown Object Hazard 2. D561 1 W ARNING Use Genuine Rhino Parts 3. D565 1 DANGER Crush ing Hazard 4. D666 1 lNSTRUCT Lubrication Chart 5.
SAFETY 2160 07/11 Safety Section 1-19 © 2011 Alamo Group Inc. SAFETY Decal Description.
SAFETY 2160 07/11 Safety Section 1-20 © 201 1 A lamo Group Inc. SAFETY.
SAFETY 2160 07/11 Safety Section 1-21 © 2011 Alamo Group Inc. SAFETY.
SAFETY 2160 07/11 Safety Section 1-22 © 201 1 A lamo Group Inc. SAFETY.
SAFETY 2160 07/11 Safety Section 1-23 © 2011 Alamo Group Inc. SAFETY.
SAFETY 2160 07/11 Safety Section 1-24 © 201 1 A lamo Group Inc. SAFETY.
SAFETY 2160 07/11 Safety Section 1-25 © 2011 Alamo Group Inc. SAFETY.
SAFETY 2160 07/11 Safety Section 1-26 © 201 1 A lamo Group Inc. SAFETY.
SAFETY 2160 07/11 Safety Section 1-27 © 2011 Alamo Group Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations concern ing employer and employee eq uipment operators.
.
.
2 Contents Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Forewor d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Safety Aler ts Symbol This Safety Alert Symbol means: “A TTENTION! ST A Y ALERT! YOUR SAFETY IS INVOL VED!” The Safety Alert Symbol identi es important safety messages on equipment, safety signs, in manuals or elsewhere. When you see this symbol, be alert to the possibility of death or personal injury .
4 Industrial/Agricultural Mower T ypes Mowers are used for pastur e clipping, crop r esidue shredding, heavy brush cutting, waterways, right-of- ways, roadside or highway mowing. Also, these mowers are used for cutting grass and other gr owth in public areas such as parks and cemeteries.
5 Follow A Safety Program Protect Y ourself W ear personal protective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions.
6 Follow A Safety Program Avoid Injury Fr om Raised Equipment Avoid possible crushing injury fr om falling mower or other raised equipment. Before working near or under raised mower or equipment parts: — Securely support or block up raised mower or equipment parts according to the operator’ s manual.
7 Follow A Safety Program Be Alert! Know where to get assistance. Know how to use a rst aid kit and re extinguisher/ r e suppression system.
8 Follow A Safety Program Some Rules Y ou Must Work By (continued) — Only quali ed and authorized individuals may operate this equipment. — Never allow children to play on, ride on or operate the equipment. Children ar e not quali ed to operate this equipment.
9 Prepare For Safe Operation Check The Mower And T ractor Equipment Before beginning your work day inspect the machine and have all systems in good operational condition. WARNING! Pr event possible crushing injury from falling equipment. Hydraulic system or part failure could cause unsupported equipment to fall.
10 Prepare For Safe Operation Know The W ork Area Before you operate the mower thor oughly inspect the work area. W alk ar ound the area and inspect the surfaces you will travel on when using the mower .
11 Prepare For Safe Operation T ractor And Mower Controls Safety T est Start the tractor following the speci c pr ocedures in the manufacturer’ s operator’ s manual. These procedur es normally include: — Fasten and adjust seat belt on your ROPS-equipped tractor .
12 Prepare For Safe Operation Hitching Mower T o T ractor Three-point hitch-mounted mowers: — Refer to mower and tractor manufacturers’ manuals. — Place tractor’ s hydraulic power lift (rockshaft) selector lever in down position to avoid unexpected movement.
13 Star t Safely Make The Right Start Mow only in daylight or good arti cial light conditions. Avoid serious injury or death fr om mower -thr own objects or blade contact: — Keep chain shields, exible or solid de ector shields or dischar ge chutes in place and in good repair .
14 Operate Safely Mower -Thrown Objects (continued) Disc Mowers — When using a disc mower it is important to know the area to be mowed. If the operator has mowed the eld befor e and is familiar .
15 Operate Safely Under Mount Mower Safety Practices When mowing with an under mount mower: — Keep removable dischar ge chute in place and over dischar ge opening. — Never stand on a mower housing when the tractor engine is operating. — Distribute grass clippings with discharge chute facing mowed area.
16 Operate Safely Wing And Side Mount Mowers Safety Practices Raised wing positions reduce shielding pr otection and increases the thr own object and blade contact hazard risks.
17 Uneven T errain Mowing Safety Practices (continued) — Use extreme car e to maintain control over the equipment when operating in these conditions. — Increase tractor stability by adding wheel weights, ballast and increasing wheel spacing to maximum.
18 Parking Safety Practices — Use designated or out-of-traf c areas. — Use rm level gr ound locations. — Set parking brake. — Lower raised equipment to ground. Shut down the mower and tractor using proper equipment shut down practice before dismounting tractor .
19 Shut Down Safely Dismounting Properly — Never dismount from moving equipment. — Never jump from any machines. — Dismount carefully . — Check for slippery steps. — Keep feet and hands away from contr ols. — Use handholds and steps during dismount.
20 Per for m Maintenance Safely Prepar e Y ourself W ear personal protective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions.
21 Per for m Maintenance Safely Prepar e The Machine Stored ener gy sources (electrical, mechanical, hydraulic, pneumatic, chemical, thermal, etc.) must be controlled or reduced to a practical minimum befor e performing any maintenance, repair or service pr ocedures.
22 Per for m Maintenance Safely Per for m Maintenance Safely Use Proper V entilation If it is necessary to run an engine in an enclosed area, remove the exhaust fumes fr om the area with an exhaust pipe extension. If you do not have an exhaust pipe extension, make sure you open the doors and get outside air into the area.
23 Hydraulic System Hazards The hydraulic system is under pressur e whenever the engine is operating and may hold pressur e even after the engine is shut off. Cycle all hydraulic contr ols including the auxiliary hydraulic control after the engine is shut down.
24 Avoid Explosion WARNING! A void possible serious injury from explosion. Lead-acid batteries produce extr emely explosive gases especially when being char ged. Keep arcs, sparks, fl ames and lighted tobacco away . — Do not smoke near batteries. — Keep arcs, sparks and open ames away from batteries.
25 Tire And Wheel Maintenance (continued) WARNING! The types of wheels and tir es usually found on this equipment requir e special care when servicing to prevent death or serious injury . Do not in ate the tir es above the recommended pressur e. Be sure to r eplace tire ballast if equipped.
26 Per for m Maintenance Safely Mower Blade Maintenance (continued) — How are mower blades made? Mower blades are made of high str ength alloy spring steel.
.
2 Este manual de seguridad está destinado a señalar algunas de las situaciones de seguridad básicas que pueden sur gir durante la operación y el mantenimiento normales de la máquina y a instruirlo en prácticas de seguridad para manejar estas condiciones.
3 Aler tas de seguridad Símbolo Este símbolo de alerta de seguridad signi ca: “¡A TENCIÓN! ¡MANTÉNGASE ALERT A! ¡SU SEGURIDAD EST Á EN RIESGO!” El símbolo de alerta de seguridad identi ca mensajes de seguridad importantes sobre el equipo, sobr e letrer os de seguridad, en manuales u otros lugar es.
4 Tipos de cortadora de césped industrial/para agricultura Las cortadoras de césped se usan para recortar pasturas, desmenuzar residuos de cultivos, cortar arbustos, r ealizar desbroce pesado, cortar la hierba en vías de agua, derechos de paso, costados de caminos o autopistas.
5 Cumplimiento del programa de seguridad Protéjase a sí mismo Use la ropa de pr otección personal y los equipos de protección personal (PPE) que se le pr oporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales.
6 Cumplimiento del programa de seguridad Evite las lesiones provocadas por equipos elevados Evite posibles lesiones de aplastamiento por caídas de la cortadora u otros equipos elevados.
7 Cumplimiento del programa de seguridad ¡Manténgase alerta! Sepa dónde obtener asistencia. Sepa cómo usar un equipo de primeros auxilios y un extintor de incendios/ sistema de supresión de fuego. ¡Manténgase informado! Aproveche los pr ogramas de capacitación que se ofrecen.
8 Cumplimiento del programa de seguridad Algunas reglas que debe cumplir al trabajar (continuación) — Únicamente personas cuali cadas y autorizadas pueden manejar estos equipos. — Nunca permita que los niños jueguen en los equipos, viajen en ellos o los hagan funcionar .
9 Preparación para una operación segura Revise los equipos de la cortadora de césped y el tractor Antes de comenzar la jornada de trabajo, inspeccione la máquina y asegúrese de que todos los sistemas estén en buenas condiciones operacionales. ¡ADVERTENCIA! Evite posibles lesiones por aplastamiento producidas por equipos que caen.
10 Preparación para una operación segura Familiarícese con la zona de trabajo Antes de hacer funcionar la cortadora de césped, inspeccione cuidadosamente la zona de trabajo. Recorra a pie alrededor de la zona e inspeccione las super cies sobre las cuales se desplazará cuando utilice la cortadora.
11 Preparación para una operación segura Prueba de seguridad de los controles del tractor y de la cortadora de césped Arranque el tractor siguiendo los procedimientos especí cos del manual del operador del fabricante.
12 Preparación para una operación segura Enganche de la cortadora de césped al tractor Cortadoras montadas en enganche de tres puntos: — Consulte los manuales de los fabricantes de la cortadora y del tractor .
13 Arranque con seguridad Cómo realizar un arranque corr ecto Corte la hierba únicamente con luz diurna o en condiciones de buena luz arti cial. Evite lesiones graves o muerte producidas por obje.
14 Operación con seguridad Objetos arrojados por la cortadora de césped (continuación) Cortadoras de disco — Cuando se usa una cortadora de disco, es importante conocer la zona donde se va a cortar .
15 Operación con seguridad Prácticas de seguridad para la cortadora de césped de montaje inferior Cuando se traslada con una cortadora de césped de montaje inferior: — Mantenga la rampa de descarga extraíble en su lugar y por encima de la abertura de descar ga.
16 Operación con seguridad Prácticas de seguridad para cortadoras de césped con laterales y montaje lateral Las posiciones elevadas de los laterales reducen la protección de los escudos y aumentan los riesgos de objetos arrojados y contacto con las hojas.
17 Prácticas de seguridad para trabajos de corte en terrenos despar ejos (continuación) — Use extremo cuidado para mantener el contr ol de los equipos cuando trabaja en estas condiciones. — Aumente la estabilidad del tractor agregando pesos o lastre en las ruedas y aumentando al máximo la separación entre las ruedas.
18 Prácticas de seguridad para el estacionamiento — Use las zonas designadas o alejadas del tránsito. — Use lugares con suelo rme y nivelado. — Aplique el freno de estacionamiento. — Descienda el equipo de la cortadora de césped hasta el suelo.
19 Apagado con seguridad Descenso correcto — Nunca descienda de equipos en movimiento. — Nunca baje de una máquina saltando. — Descienda con cuidado. — V eri que que no haya peldaños resbaladizos. — Mantenga los pies y las manos lejos de los controles.
20 Realización de mantenimiento con seguridad Preparación personal Use la ropa de pr otección personal y los equipos de protección personal (PPE) que se le pr oporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales.
21 Realización de mantenimiento con seguridad Preparación de la máquina Deben controlarse o r educirse las fuentes de energía almacenada (eléctricas, mecánicas, hidráulicas, neumáticas, químicas, térmicas, etc.) al mínimo practicable antes de realizar cualquier pr ocedimiento de mantenimiento, reparación o servicio.
22 Realización de mantenimiento con seguridad Use ventilación adecuada Si es necesario hacer funcionar un motor en una zona cerrada, elimine del área las emanaciones de escape con una extensión del caño de escape. Si no tiene esa extensión, asegúrese de abrir las puertas y dejar entrar aire del exterior .
23 Riesgos del sistema hidráulico El sistema hidráulico se encuentra bajo presión siempr e que el motor está funcionando; puede conservar presión incluso después de apagar el motor . Haga funcionar todos los controles hidráulicos incluyendo el contr ol hidráulico auxiliar después de que el motor esté apagado.
24 Evite explosiones ¡ADVERTENCIA! Evite posibles lesiones graves por explosiones. Las baterías de plomo-ácido producen gases sumamente explosivos, especialmente durante la car ga. Mantenga alejados los arcos, las chispas, las llamas y el tabaco encendido.
25 Mantenimiento de neumáticos y ruedas (continuación) ¡ADVERTENCIA! Los tipos de ruedas y neumáticos que generalmente se encuentran en estos equipos requier en cuidados especiales al realizar servicios para evitar lesiones graves o la muerte. No in e los neumáticos por encima de la pr esión recomendada.
26 Realización de mantenimiento con seguridad Mantenimiento de las hojas de la cortadora (continuación) — ¿Cómo están hechas las hojas de la cortadora de césped? Están hechas acero para r esortes de aleación de alta resistencia.
Introduction Section 2-1 © 201 1 Alamo Group Inc. INTRODUCTION SECTION.
INTRODUCTION 2160 07/11 Introduction Section 2-2 © 201 1 Alamo Group Inc. INTRODUCTION This Boom Mower is designed with ca re and built with quality materials by skilled workers. Proper assembly , maintenance, and ope rating practices, as described in this manual, will help t he owner/operator get years of satisfactory service from the machine.
INTRODUCTION 2160 07/11 Introduction Section 2-3 © 201 1 Alamo Group Inc. INTRODUCTION The 2160 is ideal for mowing pon d embankment, levees or drainage ditches, and cuttin g overhanging limbs on fence rows.
INTRODUCTION 2160 07/11 Introduction Section 2-4 © 201 1 Alamo Group Inc. INTRODUCTION A TTENTION OWNER/OPERA T OR BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator ’s Manual, completely underst and the Safety Messages and instructions, and know how to operate correctly both the tractor and Mower .
INTRODUCTION 2160 07/11 Introduction Section 2-5 © 201 1 Alamo Group Inc. INTRODUCTION RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants for one year from the purchas e date to t he.
.
Assembly Section 3-1 © 201 1 A lamo Group Inc. ASSEMBL Y SECTION.
ASSEMBLY 2160 07/11 Assembly Section 3-2 © 2011 Alamo Group Inc. ASSEMBL Y General Assembly T o help you assemble your New 2160 an d mount it to yo ur tractor , we provide you with drawings, instructions and general information. When needed , you can get info rmation or clarification from Rhino Customer Service.
ASSEMBLY 2160 07/11 Assembly Section 3-3 © 2011 Alamo Group Inc. ASSEMBL Y TRACT OR PREP ARA TION 1. Move left re ar tire out so that it is 50 inches minimum from the outside of left rear tire to the center of t rac- t o r .
ASSEMBLY 2160 07/11 Assembly Section 3-4 © 2011 Alamo Group Inc. ASSEMBL Y MOWER T O TRACTOR A TT ACHMENT This mower is designed for 540 o r 1000 RPM PTO with CA T II or CA T III Quick Hitch (S tanda rd) or CA T II or CA T III 3-Point Hitch (Optional).
ASSEMBLY 2160 07/11 Assembly Section 3-5 © 2011 Alamo Group Inc. ASSEMBL Y DRIVELINE LENGTH CHECK PROCEDURE Before using mowe r check driveline length with tractor attach ed to mower . 1. Separate two halves of driveline and connect one half to tractor and the other ha lf to mower .
ASSEMBLY 2160 07/11 Assembly Section 3-6 © 2011 Alamo Group Inc. ASSEMBL Y A TT A CHMENT OF HYDRAULIC HOSES Once pumps are inst alled, DO NOT start th e tractor (which will tu rn the pumps) unless thehydraulic circuits are comple ted and filled with the specified universal tractor hydraulic oil.
ASSEMBLY 2160 07/11 Assembly Section 3-7 © 2011 Alamo Group Inc. ASSEMBL Y A TT A CHMENT OF HYDRAULIC HOSES It is important that pipe thr ead sealant be used only on pipe thre ads; never on 37 degree flared fitting or on straight thread “ O” ring fittings.
ASSEMBLY 2160 07/11 Assembly Section 3-8 © 2011 Alamo Group Inc. ASSEMBL Y HOSES T O V AL VE CONNECTION S FOR ELECTRONIC CONTROL (OPTIONAL) Refer to Asm-B-0032 & Asm-B-0030 and part s section page 6-2 4 for proper hose routing. Attach the e lectric valve to the plate using the two 3/8 x 5 bolts, four 3/8 flatwashers, and two 3/8 lockwashers.
ASSEMBLY 2160 07/11 Assembly Section 3-9 © 2011 Alamo Group Inc. ASSEMBL Y MOUNTING THE REMOTE COMMAND HANDLE The control ha ndle is normally mounted to an existing tractor remote lever . The control handle sel ects one cylinder on the boom to be operated from a remote outlet.
ASSEMBLY 2160 07/11 Assembly Section 3-10 © 2011 Alamo Group Inc. ASSEMBL Y HOSE CONNECTIONS (DIRECT) (Asm-B-003 2) This hydraulic connection methods re quires a break-away valve for th e swing cylinder .
ASSEMBLY 2160 07/11 Assembly Section 3-11 © 2011 Alamo Group Inc. ASSEMBL Y HEAD A TT ACHMENT 1. Align the bo om arm with the m ower head lug s. Then insert m ain pin (1) and loc k down with a 3/8 x 2 1/2 bolt (2) and a 3/8 nut. Att ach linkage with 2 - 3/4 x 3 bolt s (3) and lock with 2 -3/4 nuts (4).
ASSEMBLY 2160 07/11 Assembly Section 3-12 © 2011 Alamo Group Inc. ASSEMBL Y HYDRAULIC RELIEF A TT ACHMENT (OPTIONAL) (Asm-B-003 7) (Required if attaching to a Non-Quick Hitch Tractor) 1.
ASSEMBLY 2160 07/11 Assembly Section 3-13 © 2011 Alamo Group Inc. ASSEMBL Y ST ARTING UNIT 1. Make sure unit has been pr operly assem bled, all cy linders, Hoses, and the driveline have been connected. NOTE: Make sure that no materia ls, tools, or jacks have been lef t under the mower hea d.
ASSEMBLY 2160 07/11 Assembly Section 3-14 © 2011 Alamo Group Inc. ASSEMBL Y 7. When adding hydraulic oil, use only new oil from a se aled barre l. Used oil or oil from an open barrel may contain hig h levels of contamination.
ASSEMBLY 2160 07/11 Assembly Section 3-15 © 2011 Alamo Group Inc. ASSEMBL Y All Servis and Servis- Rhino Boom Mowers mounted on No n-Cab T ractors require witho ut exception a suita ble Operator Protective Cage be inst alled before operating to prevent Operator injury by object s thrown by the bla des.
.
Operation Section 4-1 © 201 1 Alamo Group Inc. OPERA TION SECTION.
OPERATION 2160 06/11 Operation Section 4-2 © 201 1 Alamo Group In c. OPERA TION RHINO 2160 BOOM MOWER OPERA TING INSTRUCTIONS Rhino Booms are manufa ctured with quality material by skilled workers.
OPERATION 2160 06/11 Operation Section 4-3 © 201 1 Alamo Group Inc. OPERA TION 1. St andard Equipment and Specifications HYDRAULIC BOOM ROT AR Y CUTTER Width of Cut 60” Cutting Height (Min.) 1-3/4” Cutting Capacity (Max) 2” T ractor Requirements 100 HP Hitch T ype CA T II-III Q.
OPERATION 2160 06/11 Operation Section 4-4 © 201 1 Alamo Group In c. OPERA TION 2.OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualified operat or .
OPERATION 2160 06/11 Operation Section 4-5 © 201 1 Alamo Group Inc. OPERA TION 3.TRACT OR REQUIREMENTS In addition to tractor horsepower an d size required to operate th e boom unit, the tractor must.
OPERATION 2160 06/11 Operation Section 4-6 © 201 1 Alamo Group In c. OPERA TION 3.4 T ractor Ballast T o ensure tractor stability when operat ing on flat surfaces the left rear tractor tire MUST exert a minimum down force (weight) of 1500 lbs.
OPERATION 2160 06/11 Operation Section 4-7 © 201 1 Alamo Group Inc. OPERA TION Do not connect the PT O driveline to the tractor or operate the implement unless the implement is securely con nected to the tractor . 3.6 Power T ake Off (PT O) Depending on the u nit, the mower is designed to oper at e at a PTO speed of 540 or 1000 RPM.
OPERATION 2160 06/11 Operation Section 4-8 © 201 1 Alamo Group In c. OPERA TION 4.GETTING ON AND OFF THE TRACT OR Before getting onto the tractor , the operator must read and completely underst and the implement and tractor operator manuals.
OPERATION 2160 06/11 Operation Section 4-9 © 201 1 Alamo Group Inc. OPERA TION 4.2 Dismounting the T ractor Before dismoun ting the tractor , idle the tractor engine down, disengage the head and retract the boom arm to the transport position. Park the tractor o n a level surface, place the transm ission in neutral and set the parking brake.
OPERATION 2160 06/11 Operation Section 4-10 © 201 1 Alamo Group In c. OPERA TION Never run the T ractor engine in a closed bui lding or without adequate ventilation. The exhaust fumes can be hazardous to your hea lth. (SG-23) S tar t tractor only when properly seated in the T ractor seat.
OPERATION 2160 06/11 Operation Section 4-11 © 201 1 Alamo Group Inc. OPERA TION Periodically inspect all moving parts for wear and replace when necessary with authorized service p art s. Look for loose fasteners, wor n or broken part s, and leaky or loose fittings.
OPERATION 2160 06/11 Operation Section 4-12 © 201 1 Alamo Group In c. OPERA TION 7.2 Boom Unit Pre-Operati on Inspection and Service Inspect and service the boom arm and head prior to oper ation. Damaged and/or broken parts should be repaired and/or replaced immediately .
OPERATION 2160 06/11 Operation Section 4-13 © 201 1 Alamo Group Inc. OPERA TION BOOM ARM ASSEMBL Y • Inspect condition of each a rm section weldment • Ensure all pins ar e in place. • Ensure all bolt s and screws are properly installed. • Check condition of bushings at boom pivot points.
OPERATION 2160 06/11 Operation Section 4-14 © 201 1 Alamo Group In c. OPERA TION Do not operate this Equ ipment with hy draulic oil or fuel leaking. Oil and fuel are explosive and the ir presence could present a haza rd.
OPERATION 2160 06/11 Operation Section 4-15 © 201 1 Alamo Group Inc. OPERA TION HYDRAULIC PUMP/OIL RESERVOIR • Check oil reservoir level and oil condition . (Add specific type oil if low) • Change hydraulic oil filter and hydr aulic oil according to mainte nance schedule.
OPERATION 2160 06/11 Operation Section 4-16 © 201 1 Alamo Group In c. OPERA TION ROT ARY HEAD INSPECTION • Inspect blades and bl ade bo lts for looseness and excessive wear . Rotate to 90° to make for checking eas ier . Replace dam aged, worn , and missing blades as complete sets to maint ain rotary b alance.
OPERATION 2160 06/11 Operation Section 4-17 © 201 1 Alamo Group Inc. OPERA TION 7.3 Cutting Component Inspection Inspect blade p an and blade assembly for the following: OPS-U-0031.
OPERATION 2160 06/11 Operation Section 4-18 © 201 1 Alamo Group In c. OPERA TION Inspect the Blades daily for abnormal w ear . REPLACE BOTH BLADES on that carrier IMMEDIA TEL Y if either blade has: .
OPERATION 2160 06/11 Operation Section 4-19 © 201 1 Alamo Group Inc. OPERA TION 7.4 Blade Bolt Inspection Inspect Blade Bolt Head da ily for wear as followed: Inspect the Blade Bolt Heads d aily for abn ormal wear .
OPERATION 2160 06/11 Operation Section 4-20 © 201 1 Alamo Group In c. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#________________ Make ____________________ Date: ________________ Shift.
OPERATION 2160 06/11 Operation Section 4-21 © 201 1 Alamo Group Inc. OPERA TION Boom Mower PRE-OP ERA TION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift .
OPERATION 2160 06/11 Operation Section 4-22 © 201 1 Alamo Group In c. OPERA TION 8.DRIVING THE TRAC TOR AND IMPLEMENT Safe tractor transport requires the operator to po ssess a thorough knowledge of the model being operated and precautions to take while driving with an att ac hed implement.
OPERATION 2160 06/11 Operation Section 4-23 © 201 1 Alamo Group Inc. OPERA TION T ransport only at sp eeds where you ca n maintain control of the equipment. Serious accidents and injuries can result from operating this equipment at high speeds. Understan d the T ractor and Implemen t and how it handles before transporting on str eets and highways.
OPERATION 2160 06/11 Operation Section 4-24 © 201 1 Alamo Group In c. OPERA TION 8.2 Brake and Differential Lock Setting Make sure the tractor brakes are in good ope rating condition. T ractor brakes can be set to operate independently allowing single rear wheel braking action or locked together to p rovide simultaneous rear wheel braking.
OPERATION 2160 06/11 Operation Section 4-25 © 201 1 Alamo Group Inc. OPERA TION 8.3 Driving the T ractor and Boo m Inspect the area to be mowed before beginning operati on. Identify any drop- offs, slopes, holes, hidden obstructions or similar obstacle that could cause the tractor to loose stability and potential roll-over .
OPERATION 2160 06/11 Operation Section 4-26 © 201 1 Alamo Group In c. OPERA TION Never operate the mower head tilted down where the operator can see the bla des of the mower . The blade could throw an object toward the ope rator causing serious injury or death.
OPERATION 2160 06/11 Operation Section 4-27 © 201 1 Alamo Group Inc. OPERA TION The mower valve comes with a push-pull operator switch that, w hen properly installed, will prevent the tractor from starting if the switch is in th e ON position (pulled out).
OPERATION 2160 06/11 Operation Section 4-28 © 201 1 Alamo Group In c. OPERA TION The valves and their use will be explained in the following pages of this manual. Read each explanation carefully then practice in a safe, level area, CLEAR of all people, animals, and any obstructions.
OPERATION 2160 06/11 Operation Section 4-29 © 201 1 Alamo Group Inc. OPERA TION 9.2 Foreign Debris Hazards/Overhead Obstructions An area to be cut must first be inspected for objects that could be thrown or that could damage the machine. W alk through the a rea looking for fences, boulders, roc ks, culverts, stumps or met al objects.
OPERATION 2160 06/11 Operation Section 4-30 © 201 1 Alamo Group In c. OPERA TION Rotary Mowers are capable under adverse conditions of thro wing objects for great distances 300 feet or more) and causing seriou s injury or de ath. Follow safety messages carefully .
OPERATION 2160 06/11 Operation Section 4-31 © 201 1 Alamo Group Inc. OPERA TION There are obvious and h idden potential hazards in the operation of this Mower . REMEMBER! This mach ine is often operated in he avy brush and in heavy weeds. The Blades of this Mower can throw objects if shields are not pro perly installed and maint ained.
OPERATION 2160 06/11 Operation Section 4-32 © 201 1 Alamo Group In c. OPERA TION There are obvio us and hidden potential hazards in the operation of this Mower . REMEMBER! This machine is of ten operated in heavy br ush and in heavy weeds. The Bla des of this Mower ca n throw objects if shields are not pro perly installed and maint ained.
OPERATION 2160 06/11 Operation Section 4-33 © 201 1 Alamo Group Inc. OPERA TION 9.5 Operational Instruction When cutting trees and brush ap proach material to be cut with the head perpend icular to material. The cutting edge of the blades should be the only elements in contact with m aterial.
OPERATION 2160 06/11 Operation Section 4-34 © 201 1 Alamo Group In c. OPERA TION 9.6 Shutting Down the Attached Head T o shut down att ached boom head, first bring the tractor to a complete stop. Keep the engine speed at normal operating speed of 540 RPM, and push the M otor Switch IN to the S top position.
OPERATION 2160 06/11 Operation Section 4-35 © 201 1 Alamo Group Inc. OPERA TION DET ACHING AND STORING 1. Quick - Hitch 2. Swing the mower head to the rear . 3. Place mower head on the ground . Make sure dipper section is vertical. 4. Disconnect PTO.
OPERATION 2160 06/11 Operation Section 4-36 © 201 1 Alamo Group In c. OPERA TION Never allow children to play on or around T ractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Inadvertent contac t with controls can cause the Implement to shift or fall crushing them selves or others.
OPERATION 2160 06/11 Operation Section 4-37 © 201 1 Alamo Group Inc. OPERA TION Before transporting tr actor between locations, idle the tractor engine, disenga ge the attached head , and wait for all h ead motion to come to a complete stop.
OPERATION 2160 06/11 Operation Section 4-38 © 201 1 Alamo Group In c. OPERA TION 1 1.1 T ransporting on Public Roadways Extreme caution sh ould be used when tr ansporting the trac tor and mower o n public roadways.
OPERATION 2160 06/11 Operation Section 4-39 © 201 1 Alamo Group Inc. OPERA TION When operating on public roads, have consideration for other road u sers. Pull to the side of the road occasionally to allow all following traffic to pass. Do not exceed the lega l speed limit set in your country for agricultural tra ctors.
OPERATION 2160 06/11 Operation Section 4-40 © 201 1 Alamo Group In c. OPERA TION 1 1.2 Hauling the T ractor and Implement Before transporting a loaded tractor and implement, measure the height and width dime nsions and gross weight of the complete loaded unit.
OPERATION 2160 06/11 Operation Section 4-41 © 201 1 Alamo Group Inc. OPERA TION Arrange the chains so th at when tightened, the chains are pulling downward and against themselves. Carefully tighten th e securing chains or other fasteners using boom ers or binders to apply maximum tension.
OPERATION 2160 06/11 Operation Section 4-42 © 201 1 Alamo Group In c. OPERA TION 12.TROUBLESHOOTING GUIDE Probl em Po ssi bl e C ause R em edy Bo o m Br ea ks Ba ck To o E as i ly W or k P or t R el .
OPERATION 2160 06/11 Operation Section 4-43 © 201 1 Alamo Group Inc. OPERA TION Probl em Possi bl e C au se R em edy Cy l i n d e r E x ce ss i ve Dr i ft M a y be no r ma l O pe ra t i on C he c k A.
OPERATION 2160 06/11 Operation Section 4-44 © 201 1 Alamo Group In c. OPERA TION Problem Possi bl e C ause R em edy C yl in d er M o ve s Spong y or J e r k y A i r i n o i l Id en ti fy th e s o u r c e o f the A ir.
OPERATION 2160 06/11 Operation Section 4-45 © 201 1 Alamo Group Inc. OPERA TION Probl em P ossibl e C ause Rem edy C yl i n d er Ro d Ca me O u t of C yli nde r P is t o n N ut ba c ke d of f of t he.
OPERATION 2160 06/11 Operation Section 4-46 © 201 1 Alamo Group In c. OPERA TION Probl em Possi b l e C ause Rem ed y Mot or Inope r a t ive (Wo n ' t R u n) L ow Oi l l e v e l or N o O i l F i.
OPERATION 2160 06/11 Operation Section 4-47 © 201 1 Alamo Group Inc. OPERA TION Probl em P o ssi bl e C ause R em edy M ot or Runs To o Slow ( o r S l o w s Do w n Un d er Loa d) E n gi n e R P M t o.
OPERATION 2160 06/11 Operation Section 4-48 © 201 1 Alamo Group In c. OPERA TION Pr obl em Possibl e Cause R em edy S pindl e Le ak ing At Mo tor Du e t o M o t or S e al Fa il ur e (h yd ra u l ic O.
OPERATION 2160 06/11 Operation Section 4-49 © 201 1 Alamo Group Inc. OPERA TION P rob le m Po ss ibl e C a u se Re m ed y Sp i nd l e L o cks Up (S eiz es a n d W o n' t T u rn ) Lo ss o f l ub r ic at ion i n spi n dle In d ic a ted b y ca tast r op hic fa il ur e o f the up p er b ear i ng.
.
Maintenanc e Section 5-1 ©201 1 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE 2160 06/1 1 Maintenance Sect ion 5-2 ©201 1 Alamo Group Inc. MAINTENANCE HAZARDS WITH MAINTE NANCE OF IMPLEMENT A VOID SERIO US INJUR Y OR DEA TH FROM COMPONENT F AILURE BY KEE PING IMPLEMENT IN GOOD OPERA TING CONDITION IN PERFORMI NG PROPER SERVICE, REP AIRS AND MAINTENANCE.
MAINTENANCE 2160 06/1 1 Maintenance Sect ion 5-3 ©201 1 Alamo Group Inc. MAINTENANCE P ARTS INFORMA T ION LUBRICA TION INFORMA TION Before operating your Implement, take the time to in spect and repair any damage to the machine or tractor .
MAINTENANCE 2160 06/1 1 Maintenance Sect ion 5-4 ©201 1 Alamo Group Inc. MAINTENANCE.
MAINTENANCE 2160 06/1 1 Maintenance Sect ion 5-5 ©201 1 Alamo Group Inc. MAINTENANCE HYDRAULIC FLUID Mainta ining the proper hydraulic o il level and oil cleanliness is very import ant for continued trouble-free operation of the mower . The fluid level should b e checked daily before the mower is put into se rvice.
MAINTENANCE 2160 06/1 1 Maintenance Sect ion 5-6 ©201 1 Alamo Group Inc. MAINTENANCE Proper Oil Level Maintain the oil level within the sight gauge located on the reservoir . When oil is cold, the level should be three-quarters up the sight gauge. Ne ver fill the tank abo ve that sight gauge level.
MAINTENANCE 2160 06/1 1 Maintenance Sect ion 5-7 ©201 1 Alamo Group Inc. MAINTENANCE MAIN DRIVELINE & CA T 4 SAFETY SHIELD T o remove the main inner driveline shield . Remove the locking screws. Align the bearing t abs with the cone pockets. Mnt-B-0043.
MAINTENANCE 2160 06/1 1 Maintenance Sect ion 5-8 ©201 1 Alamo Group Inc. MAINTENANCE Make certain that the Driv eline Integr al Shields are fre e to telescope and rotate around the Driveline without binding.
MAINTENANCE 2160 06/1 1 Maintenance Sect ion 5-9 ©201 1 Alamo Group Inc. MAINTENANCE Blades Check the Blades for cracks and wear and Blad e Bolts for tightness, daily . Blades should be replaced wh en they are worn excessively , bent, deformed, or out of balance.
MAINTENANCE 2160 06/11 Maintenance Section 5-10 ©201 1 Alamo Group Inc. MAINTENANCE BLADE SER VICING Inspect blades be fore each use to det ermine that the y are prop erly installed and in good conditio n. Replac e any blade that is bent, excessively nicked, worn, or has any other dama ge.
MAINTENANCE 2160 06/11 Maintenance Section 5-11 ©201 1 Alamo Group Inc. MAINTENANCE BLADE SHARPENING Always sharpen both blades at sa me time to maintain bala nce. Follow original sharpening p attern as shown in FIGURE Mnt-R-0008. Always sharpen blade s by grinding.
MAINTENANCE 2160 06/11 Maintenance Section 5-12 ©201 1 Alamo Group Inc. MAINTENANCE BLADE CARRIER REMOV AL Remove cotter pin and loosen slo tted nut on spindle sh aft. Loosen but do not remove the nut until the bla de carrier is loosened. Use long bar inserted through blade bolt access hole with the end against rotor bar .
MAINTENANCE 2160 06/11 Maintenance Section 5-13 ©201 1 Alamo Group Inc. MAINTENANCE BLADE CARRIER INST ALLA TION Clean the tape r on both the blade carrier and output sh af t. Position carrier on the gearbox outp ut shaft and install special washe r nut.
MAINTENANCE 2160 06/11 Maintenance Section 5-14 ©201 1 Alamo Group Inc. MAINTENANCE Hardware Most nuts and bolt s will stay tight an d therefore need only pe riodic checking. However , the following nuts and bolts are extremely import ant and should receive special attention: S pindle Housing Bolts: T ighten to 400 Ft.
MAINTENANCE 2160 06/11 Maintenance Section 5-15 ©201 1 Alamo Group Inc. MAINTENANCE Boom Cylinder Removal and Replacement Instructions 1. Clear the area of all personnel before lowering the boom mower head. 2. From the tractor seat with your seat belt fastened around you, Lower the boom mower head to the ground.
MAINTENANCE 2160 06/11 Maintenance Section 5-16 ©201 1 Alamo Group Inc. MAINTENANCE Hydraulic Component Maintena nce Schedule LEXAN Sheet Cleaning Recommendations These cleaning recommendations apply.
MAINTENANCE 2160 06/11 Maintenance Section 5-17 ©201 1 Alamo Group Inc. MAINTENANCE Cleaning Procedure for Large Areas - Automated 1. Clean the surface u sing a high-p ressure wate r cleaner (max . 10Obar or 1, 450psi) and/or a s team cleaner . We sugge st that a test be made on a sma ll area, prior to cleaning the en tire sheet 2.
MAINTENANCE 2160 06/11 Maintenance Section 5-18 ©201 1 Alamo Group Inc. MAINTENANCE.
MAINTENANCE 2160 06/11 Maintenance Section 5-19 ©201 1 Alamo Group Inc. MAINTENANCE SER VICE OF SPINDLE HOUSING (FIGURE Mnt-0006) Remove blade bar or pan. Remove hydraulic motor . Remove spindle housing from unit. Drain remaining oil from housing. Using a chisel, bend the tan g on the lockwasher (6) until it is free from the slot in the nut (5).
MAINTENANCE 2160 06/11 Maintenance Section 5-20 ©201 1 Alamo Group Inc. MAINTENANCE Assembly Make sure all parts are clea n and free of any contamination Install Bearing Cup s (3 & 4) into S pindle Housing (2) u sing a suitable bearing driver to seat the cup s.
MAINTENANCE 2160 06/11 Maintenance Section 5-21 ©201 1 Alamo Group Inc. MAINTENANCE MOTOR & COUPLING INST ALLA TION Bolt motor to mount plat e. Fully tighten bolts. (Item 1). Insta ll flex coupler to the quick disconnect pulley hub using the coun tersunk socket he ad bolts (Item 2).
MAINTENANCE 2160 06/11 Maintenance Section 5-22 ©201 1 Alamo Group Inc. MAINTENANCE ST ART UP PROCEDURE 1. Read all safety instructio ns. Decals on the Machete Boom warn you of particular and multiple hazards. Many decals a re attached close to part of the Machet e Boom where t here is a po ssible hazard .
.
© 201 1 Alamo Group Inc. SEGURIDAD 2160 06/11 Sección de Seguridad 1- 15 SEGURIDAD INFORMACIÓN DE P ARTES NOT A: Para ver las calcomanias en español porfavor de refe rirse a la pagina 1-19 en la se ccion de seguridad en ingles.
© 201 1 Alamo Group In c. SEGURIDAD 2160 06/11 Sección de Seguridad 1- 14 SEGURIDAD RIESGOS CON EL MANTEN IMIENT O DEL IMPLEMENTO MANTENGA LOS IMPLEMENTOS EN BUENAS CONDI CIONES DE FUNCIONAMIENTO, A TRA VÉS DE UN SERVICIO, REP ARACIÓN O MANTENIMIENTO APROPIADO.
© 201 1 Alamo Group Inc. SEGURIDAD 2160 06/11 Sección de Seguridad 1- 13 SEGURIDAD RIESGOS EN TRANSPORTE P ARA EV IT AR LE SIONES GRA VES O LA MUERTE A L REMOLCAR O TRANSP ORT AR E QUIPOS: • MANTENGA la velocidad de transporte POR DEBAJ O DE 20 millas por hora para mantener el control del equipo.
© 201 1 Alamo Group In c. SEGURIDAD 2160 06/11 Sección de Seguridad 1- 12 SEGURIDAD RIESGOS ELÉCRTIC OS Y DE FUEGO P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR CONT ACTO ELÉCTRICO AL TRABAJAR CE.
© 201 1 Alamo Group Inc. SEGURIDAD 2160 06/11 Sección de Seguridad 1- 11 SEGURIDAD RIESGO DE FIL TRACION DE ACEITE HIDRÁULICO DE AL T A PRESIÓN P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR PENETR ACIÓN DE FIL TRACIONES DE ACEITE HIDRÁULICO DE AL T A PRESIÓN: • NO OPERE el equipo con filtraciones de aceite o combustible.
© 201 1 Alamo Group In c. SEGURIDAD 2160 06/11 Sección de Seguridad 1- 10 SEGURIDAD RIESGO DEL CONT ACTO A LA S CUCHILLAS DE CORT ADORA MANTÉNGASE LEJOS DE LAS CUCHILLAS GIRA TORIAS P ARA EVIT AR L.
© 201 1 Alamo Group Inc. SEGURIDAD 2160 06/11 Sección de Seguridad 1-9 SEGURIDAD RIESGO DE ENREDO POR EL PT O MANTÉNGASE ALEJADO DE LAS LÍNEAS DE CONDUCCIÓN Y OTROS ELEMENTOS GIRA TORIOS P ARA EV.
© 201 1 Alamo Group In c. SEGURIDAD 2160 06/11 Sección de Seguridad 1-8 SEGURIDAD RIESGO DE A TROPELLO P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR CAÍDA DEL TRACTOR O A TROPELLO DEL EQUIPO: • USE tractores equip ados con SISTEMA ANTIVUELCO (ROPS) y CINTURONES DE SEGUR IDAD par a las operaciones de corte.
© 201 1 Alamo Group Inc. SEGURIDAD 2160 06/11 Sección de Seguridad 1-7 SEGURIDAD RIESGO DE OBJECT OS LANZADOS Continuado OPERACIÓN DE LA CO RT ADORA: • NO exceda la capacidad de corte nominal de la cort adora, ni corte elementos que no sean vegetación.
© 201 1 Alamo Group In c. SEGURIDAD 2160 06/11 Sección de Seguridad 1-6 SEGURIDAD RIESGO DE OBJECT OS LANZADOS LAS CORT ADORAS GIRA TORIAS PUEDEN ARROJAR OBJET OS A 90 METROS (300 PIES) O MÁS EN CONDICIONES ADVERSAS.
© 201 1 Alamo Group Inc. SEGURIDAD 2160 06/11 Sección de Seguridad 1-5 SEGURIDAD CONECT AR O DESCONECT AR EL IMPLEMENT O DE SEGURIDAD P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR APLAST AMIENTO POR EL TRACT OR O IMPLEMENT O: CUANDO conecte el cabezal de la cort adora al brazo: • MANTENGA A LOS TRANSEÚNTES LEJO S del tractor y la cortadora.
© 201 1 Alamo Group In c. SEGURIDAD 2160 06/11 Sección de Seguridad 1-4 SEGURIDAD RIESGO DE APLAST AMIENTO P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR CAÍDA DEL TRACTOR O A TROPELLO DEL EQUIPO, .
© 201 1 Alamo Group Inc. SEGURIDAD 2160 06/11 Sección de Seguridad 1-3 SEGURIDAD SEGURIDAD DEL OPERADOR P ARA EVIT AR LESIONES GRA VES O LA MUERTE, SIGA LAS SIGUIENTES INSTRUCCIONES: • LEA, COMPRENDA y SIGA las instrucciones del Manual del Operador , al i gual que las Advertencias y Mensajes de Seguridad.
© 201 1 Alamo Group In c. SEGURIDAD 2160 06/11 Sección de Seguridad 1-2 SEGURIDAD INSTRUCCIONES DE SEGURI DAD Y PRÁCTICAS GENERALES El mejor operador es un oper ador cuidadoso. La seguridad es de importancia fundament al para el fabr icante, y tamb ién debería serlo p ara el propiet ario u operador .
© 201 1 Alamo Group Inc. Sección de Seguridad 1-1 SECCIÓN DE SEGURIDAD.
.
Instrucciones de operaciones antes de la entrega del DISTRIB UIDOR al CLIENTE El distribuidor deberá informar al comprad or de este pr oducto las condicione s, disposiciones y procedimientos de garan.
Alamo Group Ag. Division está dispue sto a suministrar un (1) Video de Prácticas de Seguridad p ara Cort adoras AEM Por favor enviar: Video de Seguridad para el Opera dor de Cortadoras AEM/FEMA – .
A fin de reducir la tasa de accidentes y mejorar la opera ción segura de las cortador as, Alamo Group Ag Division se ha asociado con otros fab ricantes de la industria p ara de sarrollar el video y la guía de Prácticas de Seguridad para Cortadoras Industria l es y Agrícolas AEM/FEMA.
Al propiet ario/operador/distribuidor Este Manual del Operado r es una parte esencia l de la o peración segura de est a máquina y se debe manten er con la unidad siempre. El imp lemento incluye un port a manual donde se pu ede guardar el manual de ma nera adecuada.
©201 1 Alamo Group Inc. SER VIS 2160 Publicado en 06/1 1 Parte nº. 00765708C MANUAL DE OPERADOR RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.
Een belangrijk punt na aankoop van elk apparaat Servis-Rhino BOOM ROTARY MOWER 2160 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Servis-Rhino BOOM ROTARY MOWER 2160 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Servis-Rhino BOOM ROTARY MOWER 2160 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Servis-Rhino BOOM ROTARY MOWER 2160 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Servis-Rhino BOOM ROTARY MOWER 2160 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Servis-Rhino BOOM ROTARY MOWER 2160 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Servis-Rhino BOOM ROTARY MOWER 2160 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Servis-Rhino BOOM ROTARY MOWER 2160 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
