Gebruiksaanwijzing /service van het product P/N 00763618C van de fabrikant Servis-Rhino
Ga naar pagina of 114
TURF FLEX Published 08/01 Effective Serial No. TX-10880 to Current P/N 00763618C OPERA T OR'S MANUAL This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times.
TO THE OWNER/OPERA T OR/DEALER WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain.
In order to reduce accidents and enhance the safe operation of mowers, Alamo Gr oup Ag Division, in cooperation with other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural Mower Safety Practices video and guide book.
Alamo Group Ag. Division is willing to provide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Saf.
T ABLE OF CONTENTS SAFETY SECTION ......................................................................................................................................... 1 - 1 Decal Location ..........................................................
.
SAFETY SECTION Safety Section 1-1.
Safety Section 1-2 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY A safe and careful operator is the best operator . Safety is of primary importance to the manufacturer and should be to the owner/operator . Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions.
Safety Section 1-3 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY DANGER! Never operate the Tractor or Implement until you have read and completely understand this Manual, the Tractor Operator’s Manual, and each of the Safety Messages found in the Manual or on the Tractor and Implement.
Safety Section 1-4 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY DANGER! Start tractor only when properly seated in the Tractor seat. Starting a tractor in gear can result in injury or death. Read the Tractor operators manual for proper starting instructions.
Safety Section 1-5 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY WARNING! Transport only at safe speeds. Serious accidents and injuries can result from operating this equipment at unsafe speeds. Understand the Tractor and Implement and how it handles before transporting on streets and highways.
Safety Section 1-6 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY WARNING! Mow only in conditions where you have clear visibility in daylight or with adequate artificial lighting. Never mow in darkness or foggy conditions where you cannot clearly see at least 100 yards in front and to the sides of the tractor and mower.
Safety Section 1-7 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY WARNING! Many varied objects, such as wire, cable, rope, or chains, can become entangled in the operating parts of the mower head. These items could then swing outside the housing at greater velocities than the blades.
Safety Section 1-8 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY WARNING! Do not let the Blades turn when the Mower Deck is raised for any reason, including clearance or for turning.
Safety Section 1-9 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY DANGER! Rotary Mowers are capable under adverse conditions of throwing objects for great distances (100 yards or more) and causing serious injury or death.
Safety Section 1-10 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY WARNING! The rotating parts of this machine continue to rotate even after the PTO has been turned off. The operator should remain in his seat for 60 seconds after the brake has been set, the PTO disengaged, the tractor turned off, and all evidence of rotation has ceased.
Safety Section 1-11 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY PARTS INFORMATION Servis-Rhino mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings.
Safety Section 1-12 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY R 11-03-99 Attaches to Bolts on top of Divider Gearbox. 11' Models 14 22 20 21 8 6 10 9 18 24 3 4 2 7,29 3A 23 13 19 11 .
Safety Section 1-13 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY 15 Attaches to Bolts on top of Divider Gearbox. Stand for SMV 3 4 23 16 11 19 28 7 23 13 2 27 5 9 3A 3A 24 23 25 11 23.
Safety Section 1-14 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY ITEM PART NO. Q T Y LEVEL DESCRIPTION 1 00725746 1 PELIGRO Get Manuals Translated 2 00753840 3 DANGER! Folding Wings 3 00756004 ((4)) DANGER! D/L Shield missing. DO NOT OPERATE.
Safety Section 1-15 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY 1 -- 00725746 2 -- 00753840 3 -- 00756004 4 -- 00756005 5 -- 00756059 7 -- 00758194 13 -- 02967827 Front Cover 15 -- 0.
Safety Section 1-16 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY 6 -- 00756494 8 -- 00760657 9 -- 00763536 11 -- 00769737 14 -- D103 18 -- 000678 R 04-23-99.
Safety Section 1-17 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY 23 -- D301 10 -- 00769736 19 -- 00755691 20 -- 00763613 24 -- D302 25 -- 00763535 TURF FLEX Name 26 -- Model Number 27.
Safety Section 1-18 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY 21 -- 00763977 22 -- D102 8A -- 00773723 31 -00776481.
Safety Section 1-19 Turf Flex 08/01 SAFETY © 2004 Alamo Group Inc. SAFETY SAFETY This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
INTRODUCTION SECTION Indroduction Section 2-1.
Introduction Section 2-2 Turf Flex 08/01 INTRODUCTION © 2004 Alamo Group Inc. INTRODUCTION This Rotary Mower is designed with care and built with quality materials by skilled workers. Proper assembly, maintenance, and operating practices, as described in this manual, will help the owner/operator get years of satisfactory service from the machine.
Introduction Section 2-3 Turf Flex 08/01 INTRODUCTION © 2004 Alamo Group Inc. INTRODUCTION Your Turf Flex is designed for light-duty cutting such as lawn maintenance plus small weed and grass control. With a reasonable amount of preventive maintenance, your Mower will provide years of dependable service.
Introduction Section 2-4 Turf Flex 08/01 INTRODUCTION © 2004 Alamo Group Inc. INTRODUCTION ATTENTION OWNER/OPERATOR BEFORE OPERATING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely understand the Safety Messages and instructions, and know how to operate correctly both the tractor and Mower.
ASSEMBL Y SECTION Assembly Section 3-1.
Assembly Section 3-2 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 DANGER! Operating with PTO speed over 540 RPM can cause excessive vibration with subsequent machine failure which can cause serious injury or even death. Never exceed 600 RPM.
Assembly Section 3-3 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 SWIVEL AND LIFT ARM ATTACHMENT Attach the Swivel Assembly on the Lift Arms using chrome plated Attaching Pin (1) retain with Roll Pin (2). Figure 3 . Remove the Attaching Pin (3) from the Main Frame.
Assembly Section 3-4 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 1 2 HYDRAULIC CYLINDER ATTACHMENT Attach the Rear Hydraulic Cylinder to the Main Frame with Fittings pointing down . Retain with Pin and Cotter Pin. Figure 5 . Attach the Wing Hydraulic Cylinders to the the Main Frame and Toggel Links with Pins provided.
Assembly Section 3-5 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 CASTER WHEEL ATTACHMENTS REAR MOWER (FIGURE 8) Attach the right and left Axle Arm Weldment (1) to the deck with 3/8" Gr. 5 bolts (2) flatwasher (1-1/2OD x 3/16 thick) (3), and 3/8 locknuts (4).
Assembly Section 3-6 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 CASTER WHEEL ATTACHMENTS REAR MOWER (11' MODEL) FIGURE 10 Attach the right and left Axle Arm Weldment (1) to the deck with 3/8" Gr. 5 bolts (2) flatwasher (1-1/2"OD x 3/16" thick) (3), and 3/8" locknuts (4).
Assembly Section 3-7 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 4 8 10 9 12 6 7 5 REAR 3 2 1 11 FIGURE 12 REAR 1 7 4 3 7 7 8 10 10 5 7 6 8 9 11 12 14 13 FIGURE 11 NOTE: Use Spacers #00763313, 1-3/8" long with Bolts.
Assembly Section 3-8 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 FIGURE 13 AXLE ARMS IN POSTION Note bolt locations of Axle Arms on 60" Deck.
Assembly Section 3-9 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 AXLE ARMS IN POSTION Note bolt locations of Axle Arms on 72" Deck.
Assembly Section 3-10 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 DRIVESHAFT ATTACHMENT All drivelines are equipped with slide collars on end yokes. To attach to the shaft grab and pull the collar on the end of attaching yoke toward the opposite end of the driveline.
Assembly Section 3-11 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 LEFT WING DRIVELINE RIGHT WING DRIVELINE Constant Velocity (CV) Driveline Attach the wing CV driveline to the center power divider gearbox with CV head at center box. Attach the end yokes so they are oriented in line the same as shown.
Assembly Section 3-12 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 ROPE ROUTING FOR AUTOMATIC HEAD LOCKS Attach rope ends to latch at location shown in figure 18.
Assembly Section 3-13 ASSEMBL Y © 2004 Alamo Group Inc. ASSEMBL Y Turf Flex 08/01 FIGURE 19 NOTE: All lengths are before forming the loops. NOTE: FIELD ASSEMBLY (FIGURE 19)- Head Locks 1. Loop ends back through welded link on lock bar and then inside of braid by forming a hole 16" from end.
..
OPERA TION SECTION Operation Section 4-1.
Operation Section 4-2 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION The safe operation of this machine is the responsibility of the operator. The operator should be familiar with the mower and tractor and all safety practices before starting operation.
Operation Section 4-3 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION NOTE: If attaching Mower Clevis, tractor drawbar must extend to rear to allow turning without binding in the Tongue Clevis. DO NOT USE THIS TYPE DRAWBAR WITHOUT STABILIZERS.
Operation Section 4-4 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION DRIVELINE ATTACHMENT TO TRACTOR 1. Grasp and pull collar on end of attaching yoke toward mower. 2. Slide yoke (with collar depressed) onto PTO shaft. 3. Move yoke back and forth until locking collar clicks forward and locks the yoke in place.
Operation Section 4-5 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION Enter the area to cut with the mower operating at PTO speed and, if it becomes necessary to temporarily regulate engine speed during operations, increase or decrease the throttle gradually.
Operation Section 4-6 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION BEFORE OPERATING OR TRANSPORTING THIS MOWER Always display this SMV emblem ( FIGURE 6 ) on the stand mounted on the center Gearbox when transporting this mower where it is clearly visible to following traffic.
Operation Section 4-7 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION WARNING! Either failure can allow the Driveline to come loose from the tractor which could cause bodily injury to the operator or others in the vicinity along with expensive damage to the tractor and/or Cutter.
Operation Section 4-8 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION INCORRECT: DO NOT approach ditch straight on. FIGURE 11 CORRECT: Approach ditch at an angle FIGURE 10 If you have a.
Operation Section 4-9 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION CV DRIVELINE CHECK PROCEDURES The Main Driveline to tractor is equipped with a special constant velocity (CV) joint that allows the joint to run smooth with no vibration even at joint angles up to 80 degrees.
Operation Section 4-10 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION TROUBLESHOOTING PROBLEM POSSIBLE CAUSE REMEDY STREAKING Slow Blade Speed Operate PTO at 540 RPM. Worn Blade Tips Replace with Genuine RHINO Blades. See your Rhino dealer.
Operation Section 4-11 Turf Flex 08-01 OPERA TION © 2004 Alamo Group Inc. OPERA TION TROUBLESHOOTING PROBLEM POSSIBLE CAUSE REMEDY BELT SLIPPAGE Mower overloading, material too Reduce tractor ground speed but tall or heavy maintain full PTO rpm. Cut material twice, one high pass and then mow at desired height.
..
MAINTENANCE SECTION Maintenance Section 5-1.
Maintenance Section 5-2 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 Before operating your Mower, make sure it is properly lubricated and thoroughy inspected. Only a minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and trouble free operation.
Maintenance Section 5-3 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 GEARBOX The Gearboxes have been filled with lubricant to the Test Plug Level prior to shipment. However, you should check the oil level at Test Plug before operating, and frequently thereafter.
Maintenance Section 5-4 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 R 11-17-95 BLADE SPINDLE LUBRICATION Blade spindles must be lubricated daily (every 8 hrs). Figure 6. Access lubrication fitting through hole in outer shields and in center gearbox mounting.
Maintenance Section 5-5 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 WARNING! When attaching slide collar yoke to gearbox shaft, it is important that the spring-activated locking collar slides freely and locking ball is seated on the groove on PTO shaft.
Maintenance Section 5-6 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 BLADE SERVICING Inspect blades before each use to determine that they are properly installed and in good condition. Replace any blade that is bent, excessively nicked, worn, or has any other damage.
Maintenance Section 5-7 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 1 FIGURE 10 10 LBS. 3/4" 2 3 4 5 Locknut Flatwasher Spacer Bolt Flatwasher BELT ADJUSTMENT PROCEDURE (All Models except 11') Adjust the tension in the drive belt, item1, properly so that it deflects 3/4" when a force of approximately 10 lb.
Maintenance Section 5-8 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 BELT ADJUSTMENT PROCEDURE (11' MODEL) Adjust the tension in the drive belt, item 1, properly so that they deflect 3/4" when a force of approximately 10 lb.
Maintenance Section 5-9 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 STORAGE Your rotary mower represents an investment from which you should get the greatest possible benefit.
Maintenance Section 5-10 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 BLADE SPINDLE SERVICE INSTRUCTIONS (FIGURE 13) DISASSEMBLY 1. Remove adjusting nut #3. 2. Support spindle housing #2 under flange and drive out shaft assembly #1.
Maintenance Section 5-11 MAINTENANCE © 2004 Alamo Group Inc. MAINTENANCE Turf Flex 08-01 CLUTCH ASSEMBLY (Figure 14) 1. Remove snap ring (1). This allows removal of complete quick coupler (13,14,15,2) and three locking clutch balls (18). 2. Tighten four hex nuts (10) until spring assembly (9 and 12) are loose in main housing (3).
.
T O THE OWNER/OPERA TOR/DEALER Keep children away from danger all day, every day... Equip tractors with rollover protection (ROPS) and keep all machinery guards in place... Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.
TURFFLEX-OMWPL-08/01 Printed U.S.A. P/N 00763618C.
Een belangrijk punt na aankoop van elk apparaat Servis-Rhino P/N 00763618C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Servis-Rhino P/N 00763618C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Servis-Rhino P/N 00763618C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Servis-Rhino P/N 00763618C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Servis-Rhino P/N 00763618C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Servis-Rhino P/N 00763618C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Servis-Rhino P/N 00763618C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Servis-Rhino P/N 00763618C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
