Gebruiksaanwijzing /service van het product MX-3114N van de fabrikant Sharp
Ga naar pagina of 19
INST ALLA TION MANUAL Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these p arts with specified ones for maintaining the safety a nd performance of the set. SHARP CORPORA TION This document has been published to be u sed for after sales service only.
MX-31 14N T ransit, Installation (using) environment, Note - i MX-31 14N 6HUYLFH0D QXDO T ransit, Installation (using) environment, Note 1. Inst alling (use) conditions Before installing the machine, check that th e following installing (use) conditions are satisfied.
MX-31 14N T ransit, Installation (using) environment , Note - ii Operational environment T emperature: 10 to 35 q C Humidity: 20 to 85% RH Atmospheric pressure: 590 to 1013h Pa (altitude: 0 to 2000 m) (2) Cont aminates If dust enters the machine, it may cause dirty copy and a paper jam, resulting in a shortened lifetime.
MX-31 14N Transit, Inst allation (using) environment, Note - iii G . Note for proper dr um, developi ng, fusing and transfer unit han dling When handling the OPC drum, developing and transfer units, observe the following items. Drum unit • T o prevent damage to the OPC drum, avoid working on the drum unit in high intensity light areas.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 1 MX-31 14N 6HUYLFH0DQXDO [2] MX-2314N/2614N/31 14N (MAIN UNIT) 1. Unp acking A. Unpacking B. Fixing tape and protection m aterial removal 26cpm/31cpm machine C. Packed items check * Depending on th e country D.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 2 2. Inst allation When an option al paper feed desk is connected to the machine, unpack and install the paper feed desk, then unpack the machine. Place the machine on the option desk securely , and perform the installing procedures of the machine.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 3 6) Attach the cover . 7) Shake the developing unit several times horizontally and strongly . 8) Open the toner shutter of the developing u nit and check to confirm that the re is pr oper amount of developer .
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 4 When installing the machine, there is no need to remove or install the OPC drum u nit. If it must b e removed or installed for any reaso n, follow the procedures bel ow .
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 5 9) Open the front cabinet, and insert each toner cartridge. Be sure to install the co lor cartridges to their proper positions. Avoid installation to a dif ferent color position. Do not forcibly insert the toner ca rtridge.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 6 4) Move the PTC cleaning rod back and forth a f ew times to clean the PTC wire. After completion of cleaning, insert the cleaning rod completely to the bottom. 5) Return the LSU cleaning rod to the front cabinet so that the felt faces upward.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 7 E. Specifi cations setup Use simulation 26-6 to set the machines de stination. After completion of destination settings, change the set valu es to customize the following settings. 3. Image quality check A.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 8 2) Press [EXECUTE] key . [EXECUTE] key is highlighted and the image registration auto- matic adjustment is started.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 9 5) If the display of ALL_ROT A TE is N G , turn all the LSU skew adjustment screws to adjust, an d perform the procedures 2) to 4). Repeat the procedur es 2) to 5) until the display of ALL_ROT A TE becomes OK.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 10 a. Color copy check items (Check to confirm the following:) Color copy check items Adjustment items 1 There are 12 void areas. Main machine S/ M ADJ3-A to D Sim50-28 2 Registrations (one point for the main scanning, and one point for the sub scanning) are not shifted.
MX-31 14N MX-2314N/2614N/31 14N (MAIN UNIT) 2 – 1 1 b. Monochrome copy check items ( Check to confirm the follo wing:) Color copy check items Adjustment items 1 There are 12 void areas. Main machine S/M ADJ3-A to D Sim50-28 2 The resolution of 5.0 (5 points) can be seen.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 12 Method 2 Use SIM46- 21 to print the colo r balan ce adjust ment sheet, and check each process (CMY) black patch co lor balance and the black patch in order to confirm that the color balance adjustment is proper .
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 13 (4) Copy/Printer color balance and density adjustment (Automatic adjustment) When a printer option is installed, be sure to execute the above item. 1) Enter the SIM46-74 mode. 2) Press [EXECUTE] key .
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 14 6) Set the color patch image (adjustment pattern) printed in the procedure 5) on the document table. Set the color patch image (adjustment pattern) printe d in the procedure 2) on the document table.
MX-31 14N MX-2314N/2614N/31 14N (MAIN U NIT) 2 – 15 10) When "COMPLETED THIS PROCEDURE" is displayed, the adjustment operation is completed. Cancel SIM46-74. The adjustmen t result becomes valid only when the both adjustments in the copy mode and in the pri nter mode are completed.
Een belangrijk punt na aankoop van elk apparaat Sharp MX-3114N (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sharp MX-3114N heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sharp MX-3114N vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sharp MX-3114N leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sharp MX-3114N krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sharp MX-3114N bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sharp MX-3114N kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sharp MX-3114N . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
