Gebruiksaanwijzing /service van het product RD-6506 van de fabrikant Sherwood
Ga naar pagina of 46
RD-6506 AUDIO/VIDEO RECEIVER OPERA TING INSTR UCTIONS INSTR UCCIONES DE FUNCIONAMIENT O RECEPT OR DE AUDIO/VIDEO RECEPTEUR AUDIO/VIDEO MODE D'EMPL OI АУДИО/ВИДЕО ПРИЕМНИК ИНСТРУКЦИЯ ПО ЭК СПЛУ А Т АЦИИ AUDIO/VIDEO RECEIVER BEDIENUNGSANLEITUNG 6505(G) cover_5lan_cover.
ENGLISH 2 Intr oduction : TO RED UCE THE RIS K O F FI RE OR ELEC TRI C SH OCK , DO NO T EX POS E T HIS APP LIAN CE TO R AIN OR MOI STU RE. This symbol is intended to alert the user to the presence of .
3 ENGLISH CONTENTS Introduction • READ THIS BEFORE OPERATING YOUR UNIT | 2 System Connections | 4 Front Panel Controls | 10 Remote Controls | 12 • REMOTE CONTROL OPERATION RANGE | 13 • LOADING B.
ENGLISH 4 S yst em Connections • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected.
5 ENGLISH HDMI VIDEO 2 VIDEO 1 MONITOR OUT VI DE O 2 IN OU T MO NI TOR OUT VI DE O 1V I DE O 1 VI DE O AU DIO VI DE O 1 VI DE O 2 VI DE O 1 IN 2 . CONNECTING VIDEO COMPONENTS • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component.
ENGLISH 6 ■ HDMI (High Definition Multimedia Interface) connection : (*) • You can connect the source component (DVD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord. • The HDMI connection can carry uncompressed digital video signals and digital audio signals.
ENGLISH 7 5. CONNECTING SUBWOOFER PREOUT • To emphasize the deep bass sounds, connect a powered subwoofer. SU BW O OF ER OUT 4. CONNECTING DIGITAL INS • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to CD, VIDEO 1 and VIDEO 2 of this unit can be connected to these DIGITAL INs.
ENGLISH 8 6. CONNECTING SPEAKERS SP EA KER S RLRL SU RR OUND (6 ) CEN TE R (6 ) FR ON T (6 ) • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and -).
ENGLISH Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows : ■ Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV or monitor screen as possible.
ENGLISH 10 F r ont P anel Controls ON / STANDBY AUTO / MANUAL SURROUND STEREO VIDEO AUDIO SOUND INPUT AUDIO ASSIGN SPEAKER ON / OFF TONE CH.LEVEL SETUP ENTER / MEMO BAND PRESET TUNE PHONES AUX 1 AUX 2.
ENGLISH 11 AUX 1 AUX 2 • The AUX 1, 2 IN jacks can be connected to additional audio components such as an MP3 player, etc. ■ Note : • When connecting these jacks to an MP3 player, etc.
ENGLISH 12 R emot e Contr ols CURSOR CONTROL( , , , ), ENTER </SEARCH MODE, SELECT / > but tons The functions in “< >” are r egional option for Eur ope, etc. NETWORK CONTR OL but tons ■ Note: • The VIDEO 3 and NETWORK CONTROL buttons are not available for this receiver.
ENGLISH 13 ON / STANDBY AUTO / MANUAL SURROUND STEREO VIDEO AUDIO SOUND INPUT AUDIO ASSIGN SPEAKER ON / OFF TONE CH.LEVEL SETUP ENTER / MEMO BAND PRESET TUNE PHONES AUX 1 AUX 2 POWER AUDIO / VIDEO REC.
ENGLISH Oper ations L I S T EN IN G T O A P R OG R A M S O U R C E Before operation • Enter the standby mode. • The STANDBY indicator lights up. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.
ENGLISH 15 TONE TUNE • Each time these buttons are pressed, the tone mode is selected as follows : OFF : To listen to a program source without the ↕ tone effect.("DIR" lights up.) ON : To adjust the tone for your taste.("DIR" goes off.
ENGLISH 16 SURROUND SOUND • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. ■ DTS Digital Surround DT S D ig ita l Sur ro und (a lso c all ed si mp ly DT S) su ppo rt s u p to 5.
17 ENJO YING SURROUND SOUND • Each time this button is pressed, the mode changes as follows : Auto surround mode : The optimum surround mode will be automatically selected depending on the signal format being input.
ENGLISH 18 • While playing digital signals form Dolby Digital program source or listening in Dolby Pro Logic II Music mode, you can adjust their parameters for optimum surround effects. • Then “DRC: ~” (or “PANO : ~ ”) is displayed for several seconds.
ENGLISH 19 TUNE • The volume level of each channel can be adjusted easily with the test tone function. ■ Note : When the SPEAKER button is set to off, the test tone function does not work.
ENGLISH 20 Adjusting the current channel level • Each tim e th ese butt ons are pre ssed , th e co rres pon ding cha nnel is sele cted as foll ows : → REF 1, 2 (or CAL) ↔ L ↔ C ↔ R ← → &.
ENGLISH Memorizing the adjusted channel levels • Then "1" of "REF 1" indication flickers for several seconds. • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want.
ENGLISH 22 LISTENING T O RADIO BRO ADCASTS Auto tuning • Each time this button is pressed, the band changes as follows ; → FM ST → FM MONO → AM ("ST" lights up) ("ST" goes .
• When using the NUMERIC buttons on the remote control. Examples: For “3” : For “15” : For “30” : Tuning to preset stations PRESET ENTER/MEMO TUNE PRESET 3. Select the desired preset number (1~30) and press the ENTER(/MEMORY) button. 4. Repeat the above steps1 to 3 to memorize other stations.
ENGLISH 24 LISTENING T O RDS BRO ADCASTS(FM ONL Y) RDS T uner (Regional Option f or some countr ies in Eur ope , etc .) • You can search for stations by program type. RDS(Radio Data System) is a method for sending information signals together with the transmitter signals.
ENGLISH 25 • Each time this button is pressed, the display mode changes as follows: * Program Service Name(PS)-The name of the radio station. * Program Type(PTY)-This indicates the kind of program currently being broadcast. * Radio Text(RT)-Messages sent by the radio station.
ENGLISH 26 RECORDING • The digital signals from the coaxial, optical digital input or HDMI IN can be heard but cannot be recorded. • When recording the analog signals from CD, VIDEO 1~2, be sure to select the analog input. (For details, refer to "When CD, VIDEO 1~2 is selected as an input source" on page 14.
27 Operating the sleep timer • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
28 Before operation To use the HDMI control functions properly, it is recommend to confirm the HDMI control functions usable with each connected component by performing the following operations. ■ Note : • Some HDMI control functions may not work with certain components and TV that are not compatible with them.
S yst em Set up 29 • The setup menu is displayed on the fluorescent display and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.
ENGLISH 30 SW M : NORM / SW + T ONE : OFF A.P .S : OFF / 2H / 4H / 6H RETURN BASS : 0 / - 10 ~ + 1 0 TRE : 0 / - 1 0 ~ + 1 0 SPK SET VID 1 CFG VID 2 CFG CD CFG RETURN CONFIG X-O VER DIST ANCE RETURN M.
1 . Press the CURSOR UP( ▲ )/DOWN( ▼ ) buttons to select the desired item. 2. Press the CURSOR LEFT( ◀ )/RIGHT( ▶ ) buttons to set the selected item as desired SETTING THE SY STEM 31 SW M : NORM / SW + T ONE : OFF A.
ENGLISH 32 OFF : To listen to a program source without the tone effect. ("DIR" lights up.) ↕ ON : To adjust the tone for your taste. ("DIR" goes off.) ■ When the TONE is set to ON to adjust the tone (bass and treble) ① Press the ENTER button to enter the tone setting mode.
33 3. Press the CURSOR LEFT( ◀ )/RIGHT( ▶ ) buttons to set the selected item as desired. 2. Press the CURSOR UP( ▲ )/DOWN( ▼ ) buttons to select the desired item.
ENGLISH SETTING THE SPEAKER SETUP • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout.
ENGLISH 35 • Depending on your speaker type, you can select one of these following speaker types. • Front, Center and Surround speakers : LARGE : Select this when connecting speakers that can fully reproduce sounds below crossover frequency.
ENGLISH 36 • You can select the crossover frequency among 40, 50, 80, 100, 150 and 200 Hz. ■ About the crossover frequency • When speakers are set to "SMALL", low frequencies in those .
ENGLISH 37 ■ When selecting the desired unit • You can select either "M (Meter)" or "FT (Feet)". • Once a unit is selected, the distances are automatically changed in the selected unit. ■ When setting the distance • You can set the distance within the range of 0.
ENGLISH 38 SETTING THE CH LEVEL ■ Note : Depending on the speaker settings ("NO", etc), some channels cannot be selected. • The L FE le vel c an be ad ju ste d wit hi n t he ra ng e o f -10 ~ 0 dB an d oth er ch an nel l eve ls wi th in th e r an ge of -1 5 ~ + 15 dB • In general, we recommend the LFE level to be adjusted to 0 dB.
ENGLISH 39 Memorizing the adjusted channel levels • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. • Then "1" of "REF 1" indication flickers.
40 SETTING THE P ARAMETER When selecting “PANO”, “C.WIDTH”, “DIMEN” • You can adjust the various Dolby Pro Logic II Music parameters for optimum surround effect. ■ Note: • The parameter settings are valid only when listening in Dolby Pro Logic II Music mode.
41 ENGLISH When selecting “DRC DD” • This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track (with extremely high volume) to minimize the difference in volume between the specified and non-specified parts.
ENGLISH 42 • The HDMI connection can carry uncompressed digital video signals and digital audio signals. Depending on whether the digital audio signals input into the HDMI IN are output from the HDMI MONITOR OUT of this receiver or not, you should set the HDMI AUDIO OUT correctly.
ENGLISH 43 • The Power control function allows the power status of this unit to be interlocked with the power ON/OFF and start of playback of the connected components. OFF : Not to use the POWER CONTROL function. ↕ ON : To use the POWER CONTROL function.
44 T r oubleshooting Guide If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer.
45 Specif ications ■ AMPLIFIER SECTION • Power output, stereo mode, 6 Ω, THD 0.7%, 40 Hz~20 kHz | 2x100 W • Total harmonic distortion, 6 Ω, 100 W, 1 kHz | 0.
RD-6506 5707 -00000-573-0S A UDIO/VIDEO RECEIVER A UDIO/VIDEO RECEIVER RECEPT OR DE A UDIO/VIDEO RECEPTEUR A UDIO/VIDEO А УДИО/ВИДЕО ПРИЕМНИК 6505(G) cover_5lan_cover.
Een belangrijk punt na aankoop van elk apparaat Sherwood RD-6506 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sherwood RD-6506 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sherwood RD-6506 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sherwood RD-6506 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sherwood RD-6506 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sherwood RD-6506 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sherwood RD-6506 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sherwood RD-6506 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
