Gebruiksaanwijzing /service van het product 810T van de fabrikant Siemens
Ga naar pagina of 312
User's Guide 01.93 Edition User Documentation SINUMERIK 810T Basic Version 3, Software Version 3 Operating and Programming.
User's Guide 01.93 Edition User Documentation SINUMERIK 810T Basic Version 3, Software Version 3 Operating and Programming.
SINUMERIK 810T Basic Version 3, Software Version 3 Part 1: Operating User Documentation.
SINUMERIK 810T Basic Version 3, Software Version 3 Operating and Programming User's Guide User Documentation January 1993 Edition Valid for: Control Software Version SINUMERIK 810T GA3 3 and high.
SINUMERIK ® Documentation Printing history Brief details of this edition and previous editions are listed below. The status of each edition is shown by the code in the ”Remarks” column. Status code in ”Remarks” column : A . . . New documentation.
Preliminary Remarks Notes for the reader The SINUMERIK documentation is organized in three parts: • User documentation • Manufacturer documentation and • Service documentation This documentation/User's Guide has been written for machine tool users .
Technical comments Occasionally in this documentation you will come across this symbol and a reference to an Order Code. This is intended to indicate that the function described is only capable of operating if the control includes the option shown. An overview of the possible Order Codes is provided in Part 1: Operating / Section 7.
Terms/Abbreviations AP 1.0 – Siemens Automation Protocol Version 1.0 CL – Computer Link CNC – Computer Numerical Control COM Area – Communications Area CP – Communications Processor Module D.
General Notes 1 Operation 2 Operating Sequences 3 Monitoring Functions 4 Maintenance 5 Data Interfaces 6 Interfacing to the Machine 7 Appendix 8.
Contents Page 1 General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1 Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2 Configuration . . . . . .
2.4.8 ”REPOS” mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-60 2.4.9 “GUIDING” (operator prompting) function . . . . . . . . . . . . . . . . . . . . . . 2-61 2.5 Glossary of softkey functions . . . . . .
3.1.15.1 Setting data bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-78 3.1.15.2 Data input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-80 3.1.15.3 Data output . . .
7 Interfacing to the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 7.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 7.2 Ordering data - Options . . . . . . . . . . .
09.91 1 General Notes 1.1 Product 1 General Notes 1.1 Product The SINUMERIK 810T is a microprocessor-controlled CNC continuous-path control system for compact machine tools SINUMERIK 810T with integrated machine control panel ((Foto : Nr.
1 General Notes 09.91 1.2 Configuration 1.2 Configuration 1.2.1 SINUMERIK 810T with integrated machine control panel SINUMERIK 810T with integrated machine control panel incorporates in a single unit:.
09.91 1 General Notes 1.2.2 SINUMERIK 810T with external machine control panel 1.2.2 SINUMERIK 810T with external machine control panel SINUMERIK 810T with external machine control panel incorporates in a single unit: • Display panel, key panel, 9” graphics CRT display as described in Section 1.
09.91 2 Operation 2.1 Operating elements 2 Operation 2.1 Operating elements 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel CRT display with softkeys (see Section 2.1.1.1) Display panel (see Section 2.1.1.2) Address / numerical keys (see Section 2.
2 Operation 09.91 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel 2.1.1.1 CRT display with softkeys CRT display division, text / graphics only within the area of the dotted lines Screen edge > H G F E D C B A The CRT display is divided into 17 lines, each of 41 characters .
09.91 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Keys below the CRT display PART PROGRAM DIAG- NOSIS DATA IN-OUT SETTING DATA TOOL COMP.
2 Operation 09.91 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel 2.1.1.2 Display panel DIAGNOSIS • The red LED lights up whenever there is a signal from the diagnostics monitor. The CRT display shows you the relevant message no.
01.93 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel NC-MD Press the ”NC-MD” softkey. 272* Call up MD 272* with this key. Position the cursor on the desired axis *=0 1st axis *=1 2nd axis *=2 3rd axis *=3 4th axis *=4 5th axis *=5 6th axis *=6 7th axis.
2 Operation 09.91 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel • The yellow LED is bright: When the lower symbols of all the double-function keys on the Address/numerical keyboard (see Section 2.1.1.3) are active: The lower character of the operated double-function key is shown in the input line (see Section 2.
01.93 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel 2.1.1.3 Address / numerical keys Note: The address / numerical keyboard can be assigned differently by the machine tool manufacturer. 1) Note: These letters are not permissible for normal programming.
2 Operation 09.91 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Numeral: 7 Address for: ”Position information” axis X ..... Numeral: 8 Address for: ”Position information” rotary axis C ..... Numeral: 9 Address for: ”Position information” axis Z .
09.91 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Y Numeral: 2 Address for: ”Tool offset number” D ... Numeral: 3 Address for: ”Subroutine number” L ... Symbol for: ”Position data” axis Y ... Address for: ”Subroutine pass” P .
2 Operation 11.90 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel 2.1.1.4 Editing and input keys View of editing and input keys With this key you delete: • Characters on the input line (see Section 2.
11.90 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel 2.1.1.5 Control keys View of the control keys 1...n Cursor left / right movement Cursor up/down movement With these keys you move the cursor on the CRT.
2 Operation 11.90 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Cursor movement in an input screen form / dimension graphic display With this key you move the cursor .
01.93 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Channel changeover The SINUMERIK 810T has 3 channels: • By pressing this key once, you change to the next higher channel number compared with the number presently displayed.
2 Operation 09.91 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Acknowledge alarm Actual position in double height characters When you operate this key, the CRT display of ”Actual position” for the ” X”, ”Z” ( and ”Q1, Q2, .
09.91 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel You operate this key when you want to search in a part program for: • an address • a block number • a word or when you want to display on the screen: • a tool offset number (with the appropriate data) • a machine data (MD) or setting data (SD).
2 Operation 11.90 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel 2.1.1.6 Integrated machine control panel View of the integrated machine control panel / SINUMERIK 810 T ((Foto-Nr. 810T/.......... einmontieren)) Reset When you operate the ”Reset” key: • Operation of the current part program is interrupted.
11.90 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel This key enables you to run a part program on a block-by-block basis in the ”AUTOMATIC ” operating mode. When you operate this key, the ”SBL” (Single block) message is dis- played on the first line of the CRT (Section 2.
2 Operation 09.91 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Example for the use of ”Spindle stop” • during operation in ”MDI AUTOMATIC” mode, a block with a fault is discovered • in ”JOG”, ”INC..”,”REPOS” modes e.
11.90 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel When you operate the ”Feed start” key: • the feedrate reaches the value specified in the part program.
2 Operation 11.90 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Continuous mode: When the direction key is pressed (whether you press for a short or long time), the axis only traverses one increment (1 / 10 / 100 / 1000 / 10000 µ m, depending on the setting).
09.91 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Key for the selection of operating modes You use this key when you want to select operating modes or further softkey functions. The menu selected is shown on the bottom two lines of the CRT display (menu for softkey functions see Section 2.
2 Operation 09.91 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Operate the ETC key a second time. A 2nd continuation of the operating mode menu is shown. Section of the CRT display: 2nd extension of the operating mode menu REF- POINT Operate the ETC key a third time.
11.90 2 Operation 2.1.1 SINUMERIK 810T operator interface with integrated machine control panel Feed or rapid traverse override decrease / increase The two keys make it possible for you to decrease or increase the programmed feedrate value ”F” (with reference to 100% value).
09.91 2 Operation 2.1.2 SINUMERIK 810T operator interface with external machine control panel © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-23 SINUMERIK 810T, GA3 (BN).
2 Operation 09.91 2.1.2 SINUMERIK 810T operator interface with external machine control panel 2.1.2 SINUMERIK 810T operator interface with external machine control panel View of the SINUMERIK 810 T operator interface with external machine control panel (( Foto - Nr.
11.90 2 Operation 2.1.2 SINUMERIK 810T operator interface with external machine control panel 2.1.2.1 External machine control panel View of the external machine control panel ((Foto - Nr.
2 Operation 11.90 2.1.2 SINUMERIK 810T operator interface with external machine control panel INC FEED... Inc remental Feed (5th to 9th position) MANUAL DATA INPUT/ AUTOMATIC ACTUAL VALUE SETTING PRES.
09.91 2 Operation 2.1.2 SINUMERIK 810T operator interface with external machine control panel This key enables you to run a program on a block-by-block basis in the ”AUTOMATIC” operating mode.
01.93 2 Operation 2.1.2 SINUMERIK 810T operator interface with external machine control panel © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-27 SINUMERIK 810T, GA3 (BN).
2 Operation 01.93 2.1.2 SINUMERIK 810T operator interface with external machine control panel Feed / rapid override switch F % 0 2 6 10 20 60 40 70 80 90 100 110 120 The rotary switch, with 23 latched positions, enables you to decrease or increase the programmed feedrate value ”F” (relative to 100%).
09.91 2 Operation 2.1.2 SINUMERIK 810T operator interface with external machine control panel • the spindle is brought to a standstill. Reset When you operate the ”Reset” key: • The current part program being processed is interrupted. • Diagnostics messages are cleared (Alarm nos.
2 Operation 09.91 2.1.2 SINUMERIK 810T operator interface with external machine control panel The following values are specified in machine data: - the max.
11.90 2 Operation 2.1.2 SINUMERIK 810T operator interface with external machine control panel This key pad enables you to jog the axes in the ”JOG” , ”REPOS” or ” INC.
2 Operation 11.90 2.1.2 SINUMERIK 810T operator interface with external machine control panel Function of the direction keys With this key you traverse the ”X” axis. With this key you traverse the ”X” axis in the opposite direction. With this key you traverse the ”Z” axis.
01.93 2 Operation 2.1.2 SINUMERIK 810T operator interface with external machine control panel If you have the TRANSMIT option, you can traverse fictitious axes as well. To be able to traverse the maximum of seven axes which are then available to you, you require a modified M machine control panel.
09.91 2 Operation 2.2 Switching on / off © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-33 SINUMERIK 810T, GA3 (BN).
2 Operation 09.91 2.2 Switching on / off 2.2 Switching on / off 2.2.1 Switching on the control ? Reaction of the display panel (2.1.1.2) on the control: For approx.
11.90 2 Operation 2.3 Operating modes 2.3 Operating modes 2.3.1 General On a machine tool an NC controls by means of the part program: • the motion of the tool • the motion of the workpiece. Beyond this, further preparations are required with a numerically controlled machine tool before the actual machining process can be started.
2 Operation 11.90 2.3.2 Operating modes - overview • Feed / Jog (CRT display: JOG ) With the direction keys and the preset feedrate value ”F”, you can traverse the tool at random. After a program interruption, you can see the distance to the point of interruption displayed in the ”REPOS offset”.
11.90 2 Operation 2.3.2 Operating modes - overview • Incremental 1 . . . 10 000 jog (CRT display: INC FEED 1 . . . 10 000 ) In this operating mode, defined paraxial positioning is possible using the direction keys. The feedrate is fixed with a machine data.
11.90 2 Operation 2.3.3 Selection of operating modes © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-37 SINUMERIK 810T, GA3 (BN).
2 Operation 11.90 2.3.3 Selection of operating modes 2.3.3 Selection of operating modes 2.3.3.1 Selection of operating modes with integrated machine control panel You call up the following named opera.
09.91 2 Operation 2.3.3 Selection of operating modes Further selection: Operating mode INC FEED 1 . . . . INC FEED 10 000 ( Incremental jog) Operate the key on the machine control panel. You operate one of these softkeys. The basic display for ”INC 1.
2 Operation 09.91 2.3.3 Selection of operating modes Further selection: REFPOINT mode (traverse to reference point) Operate the key on the machine control panel. You operate this softkey. The basic display for ”REFPOINT” mode is shown on the CRT display.
11.90 2 Operation 2.3.3 Selection of operating modes 2.3.3.2 Selection of operating modes with external machine control panel INC FEED... Inc remental Feed (5th to 9th position) MANUAL DATA INPUT/ AUT.
2 Operation 11.90 2.3.4 ”Reset” with change of operating mode 2.3.4 ”Reset” with change of operating mode • When changing from one selected operating mode to another (see Handling, Section 2.3.3.1 and / or Section 2.3.3.2), a ” RESET” can be generated by the control.
11.90 2 Operation 2.3.5 Branching to operating functions within an operating mode 2.3.5 Branching to operating functions within an operating mode Depending on the mode you have selected, you will be offered a ”Basic softkey menu” of operating functions in the menu display (2.
2 Operation 11.90 2.3.5 Branching to operating functions within an operating mode 2.3.5.1 Example for the selection of operating functions and branching to other menus To select and branch to other menus, you simply use the 5 softkeys (2.1.1.1) under the CRT.
09.91 2 Operation 2.3.5 Branching to operating functions within an operating mode 2.3.5.2 Example for the selection of further operating functions within the same menu The menu on the CRT can display max. 5 functions. (( 810T)) (( Bild 13 von Druckerei einmontieren Basic CRT display in ”AUTOMATIC” mode.
2 Operation 09.91 2.3.6 Jumping back to operating functions in higher-level menus within an operating mode 2.3.6 Jumping back to operating functions in higher-level menus within an operating mode You .
09.91 2 Operation 2.4 Operating mode menu trees 2.4 Operating mode menu trees In this section you will find graphical overviews for all the SINUMERIK 810 T operating modes.
2 Operation 01.93 2.4.1 ”AUTOMATIC” mode 2.4.1 ”AUTOMATIC” mode Option STOP SUBROUT START MAINPRG START ETX START ZERO- OFFSET PROGR. ZO EXT. ZO R PARA- METERS AXIAL > SPINDLE SETTING BITS ROTAT. ANGLE SCALE MODIF. > DATA-IN START DATA- OUT BTR START STOP > TOOL- OFFSET ZERO- OFFSET MACH.
01.93 2 Operation 2.4.1 ”AUTOMATIC” mode BLOCK SEARCH PROGRAM CONTROL DIAG- NOSIS OVER- STORE OPS > COPY MOVE RENAME DELETE REORG NC- ALARM PLC- ALARM PLC- MESSAGE PLC- STATUS SW > VERSION N.
01.93 2 Operation 2.4.2 ”JOG” mode © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-49 SINUMERIK 810T, GA3 (BN).
2 Operation 01.93 2.4.2 ”JOG” mode 2.4.2 ”JOG” mode Option TOOL OFFSET ZERO- OFFSET PROGR. ZO EXT.- ZO R PARA- METER AXIAL > SPINDLE SETTING BITS ROTAT. ANGLE SCALE MODIF. > DATA-IN START DATA- OUT BTR START STOP ETX START MAINPRG START SUBROUT START STOP TOOL- OFFSET ZERO- OFFSET MACH.
01.93 2 Operation 2.4.2 ”JOG” mode COPY MOVE RENAME DELETE REORG TO AUTOM. ZO AUTOM. OVER- > STORE NC- ALARM PLC- ALARM PLC- MESSAGE PLC- STATUS SW > VERSION NC MD PLC MD SERVICE AXIS SERVICE SPINDLE SERVICE > DRIVE IW QW FW DW T C SYSTEM DATA SYSTEM BITS USER DATA USER BITS GENERAL DATA AXIAL DATA 1 AXIAL DATA 2 SPINDLE DATA MACH.
2 Operation 01.93 2.4.3 ”JOG” mode (after ”TEACH IN / PLAYBACK” in ”AUTOMATIC” mode) 2.4.3 ”JOG” mode (after ”TEACH IN / PLAYBACK” in ”AUTOMATIC” mode) G54 G55 G56 G57 TOOL OFF.
01.93 2 Operation 2.4.4 ”MDI AUTOMATIC” mode 2.4.4 ”MDI AUTOMATIC” mode NC- ALARM PLC- ALARM PLC- STATUS SW > VERSION NC MD PLC MD SERVICE AXIS SERVICE SPINDLE SERVICE DRIVE SYSTEM DATA SYSTEM BITS USER DATA USER BITS IW QW FW DW T C > SKIP YES-NO DRY YES-NO OPT.
2 Operation 01.93 2.4.5 ”REFPOINT” mode 2.4.5 ”REFPOINT” mode > Option ZERO- OFFSET PROG. ZO EXT. ZO R PARA- METER AXIAL > SPINDLE SETTING BITS ROTAT. ANGLE SCALE MODIF. > DATA-IN START DATA- OUT BTR START STOP ETX START MAINPRG START SUBROUT START STOP TOOL- OFFSET ZERO- OFFSET MACH.
01.93 2 Operation 2.4.5 ”REFPOINT” mode COPY MOVE RENAME DELETE REORG NC- ALARM PLC- ALARM PLC- MESSAGE PLC- STATUS SW > VERSION NC MD PLC MD SERVICE AXIS SERVICE SPINDLE SERVICE > DRIVE IW QW FW DW T C SYSTEM DATA SYSTEM BITS USER DATA USER BITS GENERAL DATA AXIAL DATA 1 AXIAL DATA 2 SPINDLE DATA MACH.
01.93 2 Operation 2.4.6 ”INC 1 ... INC 10 000” mode © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-55 SINUMERIK 810T, GA3 (BN).
2 Operation 01.93 2.4.6 ”INC 1 ... INC 10 000” mode 2.4.6 ”INC 1 ... INC 10 000” mode > Option ZERO- OFFSET PROG. ZO EXT. ZO R PARA- METER AXIAL > SPINDLE SETTING BITS ROTAT. ANGLE SCALE MODIF. > DATA-IN START DATA- OUT BTR START STOP ETX START MAINPRG START SUBROUT START STOP TOOL- OFFSET ZERO- OFFSET MACH.
01.93 2 Operation 2.4.6 ”INC 1 ... INC 10 000” mode COPY MOVE RENAME DELETE REORG NC- ALARM PLC- ALARM PLC- MESSAGE PLC- STATUS SW > VERSION NC MD PLC MD SERVICE AXIS SERVICE SPINDLE SERVICE DRIVE IW QW FW DW T C SYSTEM DATA SYSTEM BITS USER DATA USER BITS GENERAL DATA AXIAL DATA 1 AXIAL DATA 2 SPINDLE DATA MACH.
2 Operation 01.93 2.4.7 ”PRESET” mode 2.4.7 ”PRESET” mode > ZERO- OFFSET PROG. ZO EXT. ZO R-PARA- METER AXIAL > SPINDLE SETTING BITS ROTAT. ANGLE SCALE MODIF. > DATA-IN START DATA- OUT BTR START STOP ETX START MAINPRG START SUB- ROUTINE STOP TOOL- OFFSET ZERO- OFFSET MACH.
01.93 2 Operation 2.4.7 ”PRESET” mode USER DATA COPY MOVE RENAME DELETE REORG NC- ALARM PLC- ALARM PLC- MESSAGE PLC- STATUS SW > VERSION NC MD PLC MD SERVICE AXIS SERVICE SPINDLE SERVICE DRIVE IW QW FW DW T C GENERAL DATA AXIAL DATA 1 AXIAL DATA 2 SPINDLE DATA MACH.
01.93 2 Operation 2.4.8 ”REPOS” mode © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-59 SINUMERIK 810T, GA3 (BN).
2 Operation 01.93 2.4.8 ”REPOS” mode 2.4.8 ”REPOS” mode TOOL OFFSET SETTING DATA DIAG- NOSIS OVER- STORE REPOS NC- ALARM PLC- ALARM PLC- MESSAGE PLC- STATUS SW > VERSION NC MD PLC MD SERVICE AXIS SERVICE SPINDLE SERVICE > DRIVE IW QW FW DW G54 G55 G56 G57 SYSTEM DATA SYSTEM BITS USER DATA USER BITS T C ZERO- OFFSET PROG.
11.90 2 Operation 2.4.9 “GUIDING” (operator prompting) function 2.4.9 “GUIDING” (operator prompting) function G 33 G 34 G 35 G 02 G 03 G 12 G13 G 00 G 01 G 10 G 11 G 110 > GUIDING BLOCK NUMBER G FUNCT.
2 Operation 01.93 2.4.9 ”GUIDING” (operator prompting) function “GUIDING” (operator prompting) function, continued. ROUGH FINISH CUT ROUGH CONTOUR COMP.
09.91 2 Operation 2.4.9 ”GUIDING” (operator prompting) function SPECIAL BLOCK SPECIAL FUNCT. ADD. FUNCT. PROGRAM END BLOCK > END G 04 G 92 M 19 G 58 G 59 BLOCK END M 00 M 01 M 36 M 37 M 02 M 17 M 30 PROG. ZO SCALE MODIF. BLOCK > END G51 G 50 BLOCK END STORE MENU STORE CHOICE STORE LONGIT.
09.91 2 Operation 2.5 Glossary of softkey functions © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-63 SINUMERIK 810T, GA3 (BN).
2 Operation 09.91 2.5 Glossary of softkey functions 2.5 Glossary of softkey functions The softkey glossary explains in brief the functions that are activated when the softkeys are operated. The softkey functions are listed in alphabetical order. ACTUAL BLOCK (CURRENT BLOCK) The current block is the block currently being processed.
09.91 2 Operation 2.5 Glossary of softkey functions CIRCLE You select the G functions for circular interpolation with this softkey. Preselect: ”GUIDING” softkey (operator prompting). CONTOUR This function simplifies programming of workpiece contours with the transfer of values directly from the drawing and graphic displays.
2 Operation 09.91 2.5 Glossary of softkey functions DATA IN-OUT The data (part program, settable zero offsets, machine data, R parameters, tool offsets, PLC program, PLC operator messages, PLC machine data, user programs) are read in from an external device (e.
09.91 2 Operation 2.5 Glossary of softkey functions DRY RUN YES-NO With ”YES”, the axes are traversed at the dry run feedrate, not the programmed feedrate. The dry run feedrate is set via setting data. EDIT EDIT leads to ”SELECT PROGRAM”, ”GUIDING” and ”SIMULATION”.
2 Operation 09.91 2.5 Glossary of softkey functions LIST OF TOOLS The location number and tool number of worn tools is displayed. MACH. DATA (MACHINE DATA) Using machine data (MD) the control is interfaced to the machine. Certain functions are defined with machine data (e.
09.91 2 Operation 2.5 Glossary of softkey functions OVERSTORE You can change the value of the T, D, S, H, M words in the buffer memory. PART PROGRAM The ” PART PROGRAM” softkey leads to: – EDIT – TEACH IN / PLAYBACK – CORRECT BLOCK – DIRECTORY – PROGRAM HANDLING This key is not used to select a program for processing.
2 Operation 09.91 2.5 Glossary of softkey functions PROGRAM CONTROL (INFLUENCING THE PROGRAM) The key leads to the following functions: – SKIP BLOCK – DRY RUN FEEDRATE – PROGRAMMED STOP – RAPI.
09.91 2 Operation 2.5 Glossary of softkey functions SERVICE AXES In this display, all the axis service data are displayed. With the ”Page” key you can switch to the desired axis. SERVICE DRIVE All data required for servicing the integrated drive control (IAR) are shown in the display obtain- ed by pressing this softkey.
2 Operation 09.91 2.5 Glossary of softkey functions SPINDLE You select the M function for the spindle motion with this softkey. Preselect: ”GUIDING” softkey. START You activate the selected softkey function. STOP You stop the activated softkey function.
09.91 2 Operation 2.5 Glossary of softkey functions SW VERSION This softkey is used to display: – Type of control – Hardware data – Software versions of CPU and UMS. TEACH IN With ”TEACH IN” you generate a part program block by block. By doing this, you can test the program immediately.
2 Operation 09.91 2.5 Glossary of softkey functions ZO AUTOM (AUTOMATIC ZERO OFFSET) By traversing to the desired reference plane, the zero offset can be measured and stored. ZERO OFFSET The settable zero offsets are input as setting data. Programmable and external zero offsets are displayed on the CRT (see Section 3.
01.93 3 Operating Sequences 3.0 Preliminary remarks 3 Operating Sequences 3.0 Preliminary remarks In the previous Sections, the functions of the individual operating elements were described in detail. This Section shows how to use the operating elements in frequently occurring operating sequences.
3 Operating Sequences 11.90 3.1 Preparation 3.1 Preparation 3.1.1 Switching on When you switch the control and machine on: Follow the instructions in the machine tool manufacturer's documentation! 3.1.2 Traverse to reference point After switching on, you traverse the individual axes to the reference points.
11.90 3 Operating Sequences 3.1.2 Traverse to reference point Operate the direction keys on the integrated (or external) machine control panel. You can now traverse the individual axes one after the other to the reference point. Note: The selected traverse direction is checked by the control before starting.
3 Operating Sequences 09.91 3.1.3 Tools 3.1.3 Tools The tooling should be carried out following the instructions of the machine tool manufacturer! 3.1.4 Tool offset 3.1.4.1 Input of tool offset The input display will help you to input ”Tool offset”.
01.93 3 Operating Sequences 3.1.4 Tool offset 0 Tool number The input field marked P = ”0” is intended for the input of a max. 8-digit ”tool number”. Normally entries are not required except when using flexible tool management! Whether tool numbers are used or not is fixed in machine data (MD).
3 Operating Sequences 01.93 3.1.4 Tool offset 4 Diameter/radius 2 L1 Geometry Under points P = ”2” and P = ”3” , you enter the geometry values of the turning tools into the input field Under point P = ” 4 ” you enter the value of the cutter radius.
09.91 3 Operating Sequences 3.1.4 Tool offset 9 L2 Basic 8 L1 Basic Identifiers P = ” 8 ” and P = ” 9 ” are reserved for special uses. The ”Basic dimension” permits an additional tool length offset. The standard list of identifiers 0 to 9 can be raised to a maximum of 16 via MD.
3 Operating Sequences 09.91 3.1.4 Tool offset You select the desired tool offset number, in the range D1 ... D99, by operating either the ”Page forward” or ”Page backwards” key. or you call the desired tool offset number D ... (”5”, in this example).
09.91 3 Operating Sequences 3.1.4 Tool offset 3.1.4.2 Deleting/modifying an individual offset value You select the desired tool offset number under which you intend to delete / modify an offset value with the ”Page up / down” keys. With these keys you position the cursor at the input field to be deleted / modified.
11.90 3 Operating Sequences 3.1.4 Tool offset © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-9 SINUMERIK 810T, GA3 (BN).
3 Operating Sequences 11.90 3.1.4 Tool offset 3.1.4.3 Deleting all offset values in an offset number D ... a) You would like, for example, to delete all values stored under tool offset number ”D5”. Using the key you enter ”5”. You operate the ”Delete word / block” key.
01.93 3 Operating Sequences 3.1.4 Tool offset 3.1.4.4 Automatic tool offset This function requires a tool gauging device. The coordinates of the measuring point of the workpiece (referring to the machine) should be entered as ”Reference plane” point.
3 Operating Sequences 09.91 3.1.4 Tool offset STORE X AXIS The tool offset for the selected axis is automatically calculated and stored in the tool offset memory. Position the cursor on the input field for the tool offset number D with the cursor keys.
09.91 3 Operating Sequences 3.1.4 Tool offset 3.1.4.5 Integrated tool management The ”Integrated tool management” function is an ordering data option. 3.1.4.6 Input of tool data The “Integrated tool management” function is required for the “Input of tool data” function.
3 Operating Sequences 09.91 3.1.4 Tool offset This display then appears on the screen. ((Bild 810T/58 einmontieren)) Enter data for up to four tools in this input screen form. ENTER Now press the“ENTER” softkey. The data input is transferred to the PLC and stored in the magazine table (visible on the screen).
09.91 3 Operating Sequences 3.1.4 Tool offset Enter the geometry data in this screen form. Note that the location number in the magazine table (e. g. 3) is the same as the D No. of the tool offset memory (e. g. D3). Press the “GEOMETRY DATA”softkey to return to the ”TOOL OFFSET ” menu.
3 Operating Sequences 09.91 3.1.4 Tool offset TOOL DATA Press the “TOOL DATA” softkey. The data stored in the magazine table (PLC) is displayed (the location No. is the same as the D No. of the tool offset table). Press the “RECALL” key to return to the “TOOL OFFSET” menu.
11.90 3 Operating Sequences 3.1.5 Zero offset 3.1.5 Zero offset The actual position memory, and therefore the actual position display, are referred to the machine zero point ”M” after traversing to the reference point. The machining program for the workpiece is referred to the workpiece zero point ”W” .
3 Operating Sequences 09.91 3.1.5 Zero offset 3.1.5.1 Settable zero offsets For each axis you can select 4 variable zero offsets using ”G54” to ”G57”. For turning machines the machine zero and workpiece zero are usually at a common position on the Z axis.
09.91 3 Operating Sequences 3.1.5 Zero offset Now enter the value for the coarse offset ”G54” for the X axis into the input line, using the numerical keys; then transfer the value into the input field with the input key. • • • ... ... The inverse marking now jumps to the next input field (”coarse offset” for the Z axis).
3 Operating Sequences 09.91 3.1.5 Zero offset 3.1.5.2 Programmable zero offset - external zero offset a) Programmable zero offsets The values for the G58 and G59 offsets can be written in the program. You will find information on the programming of these zero offsets in Part 2, “Programming”, Section 2.
09.91 3 Operating Sequences 3.1.5 Zero offset b) External zero offset The ”External zero offset” values for the X and Z (and Q1,Q2,..) axes are transferred from the PLC. These values can also be displayed on the screen. SETTING DATA Press the ”SETTING DATA” softkey in any mode .
3 Operating Sequences 09.91 3.1.5 Zero offset 3.1.5.3 Automatic calculation of the zero offset This function requires a workpiece gauging device. The coordinates of the measuring points of the workpiece gauging device (referred to the machine) should be entered as ”Reference plane” point.
09.91 3 Operating Sequences 3.1.5 Zero offset STORE Z AXIS The zero offset is now automatically calculated by the control for the selected axes and stored in the memory. Input of a tool offset number D... is irrelevant for automatic tool offset. You can perform an automatic tool offset separately as described in Section 3.
09.91 3 Operating Sequences 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-.
3 Operating Sequences 09.91 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” Overview of the R parameters in each channel: Channel 1 Channel 2 Channel 3 R00 . . . R49 R50 . . . R99 R110 .
09.91 3 Operating Sequences 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” Channel-specific and central R parameters: Channel-specific R parameters (0-699)/ Central R parameters (700-999) No.
3 Operating Sequences 09.91 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” 3-26 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP.
3 Operating Sequences 09.91 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” Operate the ”SETTING DATA” softkey in any of the operating modes. Operate the ”R PARAMETERS” softkey.
09.91 3 Operating Sequences 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” You can call up further screen forms with input fields for other R parameters with the page up / down keys .
3 Operating Sequences 01.93 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” Operate the ”SETTING DATA” softkey in any operating mode. Operate the ”SPINDLE” softkey. Extend the softkey menu displayed using the ETC key to the right below the display.
09.91 3 Operating Sequences 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” ” AXIAL” setting data Using an input screen form, yo.
3 Operating Sequences 09.91 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” This input screen form appears with the input field marked in inverse video.
09.91 3 Operating Sequences 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” To do this enter the axis name, e.
3 Operating Sequences 09.91 3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.” Enter the value for the selected angle of rotation with the numeric keys. Subsequently, you can transfer the value into the input field with the input key.
09.91 3 Operating Sequences 3.1.7 Flexible plane selection 3.1.7 Flexible plane selection Sequence of operation Call one of the following modes: • PRESET • JOG • AUTOMATIC • INC 1 ... INC 10 000 • REFPOINT. Now press the softkeys “ PART PROGRAM”, “EDIT” and “Plane” one after the other.
3 Operating Sequences 01.93 3.1.7 Flexible plane selection Press the “STORE PLANE”. The selected plane is transferred into the part program. In the subsequent operator guidance (e.g. “CONTOUR” or “MACHINING CYCLES”) the axis are automatically displayed in the parameter input forms.
01.93 3 Operating Sequences 3.1.8 Axis synchronization 3.1.8 Axis synchronization The “axis synchronization” function is an ordering data option. The “axis synchronization” function duplicates the programmable main axis as long as the maximum permissible number of axes is not exceeded (for 810T / M and 820T / M, five axes).
3 Operating Sequences 09.91 3.1.8 Axis synchronization Case 1: The tool system 1 axis and the tool system 2 axis have the same offset. Both axes are traversed synchronously after you have pressed the traverse key for the leading axis (tool system 1). Case 2.
09.91 3 Operating Sequences 3.1.9 TRANSMIT coordinate transformation 3.1.9 TRANSMIT coordinate transformation The “TRANSMIT” function is an ordering data option. Definition: TRANSMIT = TRANS formation M illing I nto T urning, The TRANSMIT coordinate transformation permits face milling of turning parts on a turning machine.
3 Operating Sequences 09.91 3.1.9 TRANSMIT coordinate transformation State / event matrix for transformation selection and deselection: Note 1) Case 1: Transformation deselection on RESET: RESET is caused by pressing the RESET key, part programm (PP) end and mode change except REFPOINT.
09.91 3 Operating Sequences 3.1.9 TRANSMIT coordinate transformation 3.1.9.2 TRANSMIT function in the various modes “AUTOMATIC” and “MDI AUTOMATIC” mode: In this mode the TRANSMIT function is elected and deselected via G functions in the program.
3 Operating Sequences 09.91 3.1.9 TRANSMIT coordinate transformation “PRESET” mode: The actual value for a fictitious axis can only be set while the transformation (G131) is select- ed. It only makes sense to use the function if the transformation remain active after a RESET.
09.91 3 Operating Sequences 3.1.9 TRANSMIT coordinate transformation Display of the TRANSMIT function: In addition to the maximum of five real axes of the NC control, there are also two fictitious axes for the TRANSMIT function, i.e. a total of up to seven axes.
3 Operating Sequences 11.90 3.1.10 Program input 3.1.10 Program input You can input a program • using the keyboard • using operator guidance (prompting). While entering a program using one of the above methods, it is possible to change over to the other method; you can alternate between working with operator prompting and the keyboard.
11.90 3 Operating Sequences 3.1.10 Program input This display appears on the screen. The control shows the last part program called, in the example program no. ”%88”. ((Bild 810T/11 einmontieren)) • • • Operate the ”EDIT” softkey. Operate the ”SELECT PROGRAM ” softkey.
3 Operating Sequences 11.90 3.1.10 Program input Example: Entering an individual block Enter the block number ”N...” using the numerical keys, and conclude with the input key. Enter the first word - in the example ”G01” - and conclude with the input key.
09.91 3 Operating Sequences 3.1.10 Program input 3.1.10.2 Program input with operator guiding Program input with operator guiding means: You enter new program blocks in an opened program % ... with the aid of a menu : frequently occurring input functions (e.
3 Operating Sequences 11.90 3.1.10 Program input Select one of the following operating modes: • PRESET ( Actual value setting ) • JOG ( Feed/jog ) • AUTOMATIC ( Automatic operation ) • INC 1 ... INC 10 000 ( Incremental jog ) • REFPOINT ( Traverse to reference point ) and Now operate the ”PART PROGRAM” softkey.
11.90 3 Operating Sequences 3.1.10 Program input This display appears on the CRT. The control shows you the last part program called, in the example program no. ”%88”. ((Bild 810T/11 einmontieren)) BLOCK NUMBER GUIDING SELECT PROGRAM EDIT Using the ”SELECT PROGRAM” softkey call the desired program.
3 Operating Sequences 11.90 3.1.10 Program input G00 G90 Operate the ”G FUNCTIONS” softkey. By operating the ”G90” softkey, select the first G function required. It is not necessary to press the input key. ”G90 ” is displayed. Extend the softkey menu.
11.90 3 Operating Sequences 3.1.10 Program input Using the numerical keys, you enter the desired ”X” coordinate, with the value ”25”, and store it with the input key. ” X25 ” is displayed. . . . etc. . . . etc. Complete the block by operating the ”BLOCK END” softkey.
3 Operating Sequences 11.90 3.1.11 Contour 3.1.11 Contour The ”CONTOUR” softkey function is an extension of ”Program input with operator guiding” (see Section 3.1.10.2). With ”CONTOUR” you can select contour elements. Graphics displays support the program- ming of specific geometric contour values.
11.90 3 Operating Sequences 3.1.11 Contour Call desired program using ”SELECT PROGRAM”. Operate the ”GUIDING” softkey. Operate the ”BLOCK NUMBER” softkey. The control generates the lowest available block number N... . SELECT PROGRAM GUIDING BLOCK NUMBER Enter the functions for feed F .
3 Operating Sequences 09.91 3.1.11 Contour When you operate the ETC key... The CRT display shown here appears. The softkey functions displayed are available. ((Bild 810T/28 einmontieren)) ... this display appears with further softkey functions. ((Bild 810T/27 einmontieren)) When you operate the ETC key, the previous display reappears.
11.90 3 Operating Sequences 3.1.11 Contour Now enter the first value using the numerical keys; then store it using the input key. The inverse video marking now jumps to the next input field for the contour: the control now waits for your next input...
11.90 3 Operating Sequences 3.1.12 Program correction (”EDIT”): Insert / modify / delete word, insert / delete block © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-53 SINUMERIK 810T, GA3 .
3 Operating Sequences 11.90 3.1.12 Program correction (”EDIT”): Insert / modify / delete word, insert / delete block 3.1.12 Program correction (”EDIT”): Insert/modify/delete word, insert/delete block You can edit any part program stored in the program memory.
11.90 3 Operating Sequences 3.1.12 Program correction (”EDIT”): Insert / modify / delete word, insert / delete block Using the cursor keys, set the cursor, marked in inverse video, in front of the point to be edited. Insert word Enter the address and the new value (”X15” in example) and store it using the input key.
3 Operating Sequences 11.90 3.1.12 Program correction (”EDIT”): Insert / modify / delete word, insert / delete block • • • • • • • • • Enter the block number to be input (”N4” in example) and store it with the input key.
11.90 3 Operating Sequences 3.1.12 Program correction (”EDIT”): Insert / modify / delete word, insert / delete block 3.1.12.1 Correction display (”CORRECTION BLOCK”) When processing or simulating (see Section 3.
3 Operating Sequences 11.90 3.1.13 Program management 3.1.13 Program management 3.1.13.1 Displaying the stored programs (”DIRECTORY”) Operate the ”PART PROGRAM”, and ”DIRECTORY” softkeys one after the other in any of the operating modes: PRESET / JOG / AUTOMATIC / INC 1 .
11.90 3 Operating Sequences 3.1.13 Program management 3.1.13.2 Protection of subroutines (cycle lock) You can protect subroutines from unauthorised output or inadvertent deletion by locking them: Oper.
3 Operating Sequences 11.90 3.1.13 Program management 3.1.13.3 Cycle lock release (”ENABLE”) Operate the ”PART PROGRAM”, ”DIRECTORY” and ”SUBROUTINE” softkeys, one after the other, in any of the operating modes: PRESET / JOG / AUTOMATIC / INC 1 .
11.90 3 Operating Sequences 3.1.13 Program management 3.1.13.4 Copying a program (”COPY”) Using the ”COPY” function, you can store the same program under different program numbers in the program memory. This enables you to keep one program with the contents unchanged and make changes to the copy.
3 Operating Sequences 11.90 3.1.13 Program management 3.1.13.5 Moving a program (”MOVE”) Using the ”MOVE” function, you can move the program selected to the end of the memory. While another program is being processed, only the program at the end of the memory can be modified.
11.90 3 Operating Sequences 3.1.13 Program management 3.1.13.6 Renaming a program (”RENAME”) Using the ”RENAME” function, you can change a program number.
11.90 3 Operating Sequences 3.1.13 Program management © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-63 SINUMERIK 810T, GA3 (BN).
3 Operating Sequences 11.90 3.1.13 Program management 3.1.13.7 Deleting a program (”DELETE”) Using the ”DELETE” function you can either delete each program singly, or a sequence of programs.
11.90 3 Operating Sequences 3.1.13 Program management 3.1.13.8 Reorganizing the program memory (”REORG”) Using the ”REORG” function, the contents of the program memory can be reorganized. The space that has been cleared by deleting the programs, can be used again for the input of programs.
3 Operating Sequences 11.90 3.1.13 Program management 3.1.13.9 ”Selecting a program” Using ”SELECT PROGRAM”, you can either start a new program, or call a program already stored in the program memory, e.g. for editing (3.1.12) or simulation (3.
01.93 3 Operating Sequences 3.1.13 Program management 3.1.13.10 Operator guidance macros (OGM) and back translation Precondition: Input displays and the associated operator guidance macros developed by the machine manufacturer on the WS800A NC workstation are stored on the UMS of the system and can be activated.
3 Operating Sequences 01.93 3.1.13 Program management Example of a data block STORE Program %10 R120 = 30 R121 = 40 . . . . . . . . . . . . INPUT DISPLAY current preselected plane % 10 @ccc ( X:Y:Z ).
01.93 3 Operating Sequences 3.1.13 Program management Back translation Move the cursor into the required data block in the basic display part program under EDIT and press the softkey INPUT DISPLAY. STORE INPUT DISPLAY With "STORE", the changed values are transferred to the appropriate data block in the part program.
3 Operating Sequences 01.93 3.1.13 Program management Function FIND BLOCK using block number Precondition: The configured input display must be prepared.
01.93 3 Operating Sequences 3.1.13 Program management Function PROGRAM PRESELECTION via a configured display Precondition; The configured display must be selected for this function. Example . . . . . . . . . . . . Part program : 1234 Configured display The program number entered is preselected in the display for part program editing (EDIT).
3 Operating Sequences 11.90 3.1.14 “SIMULATION” 3.1.14 ”SIMULATION” With the ”SIMULATION” function, it is possible to test a program. The traversing movements of the tools are simulated graphically on the CRT.
11.90 3 Operating Sequences 3.1.14 “SIMULATION” Using the keyboard, enter the desired program number ”%...” (or ”L...”)- ”%16” in this example. Operate the ”SELECT PROGRAM” softkey, and then ”SIMULATION”. Now select ”AREA W-PIECE” in the newly displayed softkey menu.
3 Operating Sequences 09.91 3.1.14 “SIMULATION” Operate the ”SIMULATION” and ”START” softkeys, one after the other. The control now simulates the motions programmed on the CRT. You can interrupt simulation at any time simply by pressing the “STOP” softkey.
09.91 3 Operating Sequences 3.1.14 “SIMULATION” Operate the ”SELECT PROGRAM” and ”SIMULATION” softkeys one after the other. Using the numerical keyboard, enter the desired program number ”% ...” (or ”L...”)- ”% 16” in the example.
3 Operating Sequences 09.91 3.1.14 “SIMULATION” Using the softkey, select the ”BLOCK SEARCH” func- tion. b) “BLOCK SEARCH” BLOCK SEARCH This display is shown on the CRT. ((Bild 810T/34 einmontieren)) SIMULA- TION Operate the”START” softkey.
09.91 3 Operating Sequences 3.1.14 “SIMULATION” Example of the simulation of a part program ( ” % 88 ” ): PART PROGRAM % 88 N05 M3 S1500 LF N10 T4 D2 G42 G0 X0 Z100 LF N15 G1 F1 X10 LF N20 G3 .
3 Operating Sequences 09.91 3.1.15 Data input/data output 3.1.15.1 Setting data bits The setting data - from byte No. 5000 to 5029 - each consist of 8 bits: No. 0 to No. 7. These setting data serve for the matching of Interfaces 1 and 2, for the connection of different devices.
09.91 3 Operating Sequences 3.1.15 Data input/data output The relevant input form appears. The setting data on the top line is marked in inverse video. ((Bild 810T/36 einmontieren)) Using the cursor keys, you can position the cursor to any other setting data or .
3 Operating Sequences 11.90 3.1.15 Data input / data output 3.1.15.2 Data input Operate the ”DATA IN-OUT” softkey in any of the operation modes: PRESET / JOG / AUTOMATIC / INC 1 .... INC 10 000 / REFPOINT. DATA IN-OUT Sequence of operation This input form is shown, with the input field for ”Interface for data in” marked in inverse video.
01.93 3 Operating Sequences 3.1.15 Data input / data output Meaning Data type MPF Part program ( M ain P rogram F ile) SPF Subroutine ( S ub P rogram F ile) TOA Tool offset ( T ool O ffset A ctive) ZO.
3 Operating Sequences 11.90 3.1.15 Data input / data output Notes: When inputting from punched tape, the input data are checked for simple errors. All characters in punched tape code have a common ide.
11.90 3 Operating Sequences 3.1.15 Data input / data output This input form appears. (( 810T)) (( Bild 39 von Druckerei einmontieren Using the cursor keys, now select the upper of the two main program ”%...” or, to the right of it, subroutine ”L.
3 Operating Sequences 09.91 3.1.15 Data input / data output MAINPRG. START R PARA- METER Using the ”STOP” softkey, you can interrupt data output at any time. Start data output again. After the transfer (data output) is complete, return to a higher-level softkey menu using the RECALL key.
11.90 3 Operating Sequences 3.1.15 Data input / data output Start the output of the R parameters by operating the ”START” softkey. In the same way, you can select and start the output of data for the following: – ”TOOL OFFSET” – ”ZERO OFFSET” – ”MACHINE DATA” – ”PLC MACHINE DATA” which have not been detailed here.
3 Operating Sequences 01.93 3.1.15 Data input / data output 3.1.15.4 Part program - block transfer The "Block transfer" function is an ordering data option. Press the “DATA IN-OUT” softkey in one of the following modes: PRESET / JOG / AUTOMATIC / INC 1 .
09.91 3 Operating Sequences 3.1.15 Data input / data output Circular buffer The circular buffer is located in the part program memory and stores program sections loaded via the interface. The use of this circular buffer reduces the amount of memory available for part programs to be edited.
3 Operating Sequences 01.93 3.1.15 Data input / data output Note: When programming part programs which are to be loaded block-serially into the NC the following has to be observed: – @-commands with return jumps are not allowed in main programs. (Alarm 3012 ”Block not in memory”).
01.93 3 Operating Sequences 3.2 Machining 3.2 Machining 3.2.1 Starting a part program Before starting a part program, the control and machine must be set up for processing the part program. The axis positions programmed in the current block are approached with linear interpolation.
3 Operating Sequences 01.93 3.2.2 ”AUTOMATIC” operating mode - selection of the ”CURRENT VALUES” or ”CURRENT BLOCK” display 3.2.2 ”AUTOMATIC” operating mode - selection of the ”CURRENT VALUES” or ”CURRENT BLOCK” display Precondition: An active program is being processed in ”AUTOMATIC” mode.
01.93 3 Operating Sequences 3.2.2 ”AUTOMATIC” operating mode - selection of the ”CURRENT VALUES” or ”CURRENT BLOCK” display It is not possible to modify the data displayed on the CRT. However, the 4 relevant new softkey functions are displayed.
3 Operating Sequences 09.91 3.2.2 ”AUTOMATIC” operating mode - selection of the ”CURRENT VALUES” or ”CURRENT BLOCK” display CURRENT BLOCK Operate the ”CURRENT BLOCK” softkey. The ”CURRENT BLOCK” display for the active program appears - program ” % 88 ” in this example.
11.90 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation 3.2.3 Influencing ”AUTOMATIC” operation Influencing ”AUTOMATIC” operation (e.g. through programmed functions), is displayed in the first line of the CRT display. Display: STOP: AUTO INTERRUPTED Interruption of ”AUTOMATIC” operation (program hold), see Section 3.
3 Operating Sequences 09.91 3.2.3 Influencing ”AUTOMATIC” operation 3.2.3.1 Influencing the program With the operation of the softkeys described here, the active program is influenced. PROGRAM CONTROL Operate the ”PROGRAM CONTROL” softkey in the ”AUTOMATIC” or ”MDI AUTOMATIC”operating mode.
09.91 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation DRY YES-NO You select, for example, the ”DRY RUN FEEDRATE” softkey. Display: Dry run feedrate YES All blocks in which a feed.
3 Operating Sequences 09.91 3.2.3 Influencing ”AUTOMATIC” operation DEC-SBL YES-NO User notes on ”RAPID OVERRIDE” : During processing of a new NC program the feedrate override switch can be enabled with the keyswitch.
11.90 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation Note: The ”Single block” (see Section 2.1.1.6) function works in a similar way. Operating this key activates the ”Single block” function. The generated signal is active at the end of the (current) block being processed.
09.91 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-97 SINUMERIK 810T, GA3 (BN).
3 Operating Sequences 09.91 3.2.3 Influencing ”AUTOMATIC” operation You extend the softkey menu called under ”PROGRAM CONTROL” ... (( 810T)) (( Bild 44 von Druckerei einmontieren ... and subsequently operate the ”DRF-HANDWHEEL-ENABLE” softkey.
11.90 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation 3.2.3.2 ”OVERSTORE” Using the ”OVERSTORE” function, you can modify one or more values in the buffer memory.
3 Operating Sequences 01.93 3.2.3 Influencing ”AUTOMATIC” operation You could now modify the following data: • Tool number T ... • Spindle speed S ... or S1=..., S2=... • Auxiliary function H ... • Additional function M ... or Mn=... Using the cursor keys, now set the inverse marking to the desired input field.
11.90 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation 3.2.3.3 ”BLOCK SEARCH” The ”BLOCK SEARCH” function allows entry into a program at any desired point. In the ”Block search” display, you enter the program and the block number.
3 Operating Sequences 01.93 3.2.3 Influencing ”AUTOMATIC” operation This screen form appears with the input field marked in inverse video. ((Foto - Nr.
09.91 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation and Operate the operating mode selection key on the integrated machine control panel, and then the ”REPOS” softkey or ... ... set the operating mode selector switch on the external machine control panel to this symbol.
3 Operating Sequences 01.93 3.2.3 Influencing ”AUTOMATIC” operation 3.2.3.4 Interrupting the program Sequence of operation Now operate the ”NC Start” and ”Feed start” keys. The feed is enabled again. Operate the ”NC STOP” key. The feed drives are brought to a controlled standstill without leaving the programmed path.
09.91 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation 3.2.3.5 Program sequencing (OPS) The "Program sequencing" function is an ordering data option. This function enables you to automatically retroload and execute programs from a diskette following a predefined list.
09.91 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-105 SINUMERIK 810T, GA3 (BN).
3 Operating Sequences 09.91 3.2.3 Influencing ”AUTOMATIC” operation Using the softkey functions in this display, you can load files from the diskette into the NC as well as create, extend or delete them on the diskette (remote operation functions).
11.90 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation EXTEND FILE You can add one or more subroutines to a file which already exists by using the "EXTEND FILE" softkey.
3 Operating Sequences 11.90 3.2.3 Influencing ”AUTOMATIC” operation DIREC- TORY Using the "DIRECTORY" softkey, you demand from the disk drive unit a directory of all files stored on the diskette inserted. The disk drive unit sends this directory as a part program %9999.
09.91 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation If more than 20 programs have to be entered, you use "PAGE DOWN" to switch over to the second page of the screen form. "PAGE UP" is used to switch back to the first page.
3 Operating Sequences 11.90 3.2.3 Influencing ”AUTOMATIC” operation If the deletion range is defined as MP = 0-8999 or SR = 100-799, then the main programs with the numbers 9000 and the subroutines 99 or 800 are not deleted prior to retroloading. They remain in the memory throughout OPS! 2) The program list must have been completed.
11.90 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation Start: Every time the "START OPS" softkey is pressed, the next program to be pro- cessed according to the list is loaded into the NC memory. The first program is demanded immediately, all following ones after processing of the previous program has ended.
3 Operating Sequences 09.91 3.2.3 Influencing ”AUTOMATIC” operation You stop program sequencing manually by operating the "STOP EDIT" softkey. End: Program sequencing comes to a regular end as soon as the program number 0000 is reached the first time during processing the program sequence list.
01.93 3 Operating Sequences 3.2.3 Influencing ”AUTOMATIC” operation Data backup / manual operation: In manual operation - i.e. operator input required on the NC as well as on the disk drive unit - other types of data (e.g. machine data, PLC program etc.
3 Operating Sequences 11.90 3.2.4 ”Manual data input - automatic” (MDI AUTOMATIC) mode 3.2.4 ”Manual data input - automatic” (MDI AUTOMATIC) mode In this operating mode, you can process individual operations, block by block under NC control. After the blocks entered have been processed, they are deleted.
11.90 3 Operating Sequences 3.2.4 ”Manual data input - automatic” (MDI AUTOMATIC) mode Operate the ”Program start” key. Important: ”Feed hold” display must not be present. The entered block is now processed by the control, and subsequently deleted.
11.90 3 Operating Sequences 3.2.5 ”TEACH IN” © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-115 SINUMERIK 810T, GA3 (BN).
3 Operating Sequences 11.90 3.2.5 ”TEACH IN” 3.2.5 ”TEACH IN” Using the ”TEACH IN” function in the ”AUTOMATIC” operating mode you can generate a part program on a block-by-block basis.
11.90 3 Operating Sequences 3.2.5 ”TEACH IN” You can delete the blocks not required by entering the block no. ”N ...”, and operating the delete key. Blocks traversed correctly remain - as entered - in the memory. They do not have to be acknowledged.
3 Operating Sequences 09.91 3.2.6 “PLAYBACK” Using the direction keys, traverse to the desired position. Using the numerical keyboard, enter a block no. ”N ...”, and store it with the input key. The control transfers the X axis value under ”Actual position” into the selected block ”N .
11.90 3 Operating Sequences 3.2.6 “PLAYBACK” This display shows an example of a block ”N1”, entered using ”PLAYBACK”. (( 810T)) (( Bild 54 von Druckerei einmontieren • • • Operate the ”Program start” key after each block is entered.
3 Operating Sequences 09.91 3.2.6 “PLAYBACK” Extend the softkey menu displayed and then select the ”BLOCK SEARCH” softkey function. Press the RECALL key twice to return to the ”AUTOMATIC” basic display. Then enter block no. ”N...”of the last block in the part program and store it with the input key.
09.91 3 Operating Sequences 3.2.7 ”JOG” mode 3.2.7 ”JOG” mode In this mode, machining is performed via the NC in JOG / manual mode, but it is not programmed. You traverse the axes with the direction keys . The traversing speed is defined in machine data.
3 Operating Sequences 01.93 3.2.7 ”JOG” mode You can select ”Rapid traverse” by operating the ”Rapid override” key, simultaneously with the direction keys. You can modify the rapid traverse rate, using the feedrate override switch. The ”0%” setting generally causes feed and rapid traverse to stop.
01.93 3 Operating Sequences 3.2.8 ”Incremental” mode (”INC FEED 1 ... INC FEED 10 000”) 100 Operate the operating mode selection key on the integrated machine control panel and then any of the ” INC 1 ” to ” INC 10 000 ” softkeys or...
3 Operating Sequences 01.93 3.2.8 ”Incremental” mode (”INC FEED 1 ... INC FEED 10 000”) In ” Jog operation” the axis is traversed for as long as the key remains pressed. When the key is no longer being pressed, the traversing movement is stopped - even if the set increment has not been reached.
09.91 3 Operating Sequences 3.2.9 ”HANDWHEEL” Select the ”HANDWHEEL” softkey function. Extend the displayed softkey menu using the ETC key. HANDWHEEL This display appears on the screen.
09.91 3 Operating Sequences 3.2.10 “DRF” © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-125 SINUMERIK 810T, GA3 (BN).
3 Operating Sequences 09.91 3.2.10 “DRF” 3.2.10 ”DRF” The ”DRF” (Differential resolver function) makes it possible to generate an additional, incremental zero offset using ”HANDWHEEL”. This zero offset is not taken into account for the actual position display.
09.91 3 Operating Sequences 3.2.10 “DRF” Operate the ”DRF YES - NO” softkey: You activate the DRF offset by switching from ” NO ” to ” YES ”. Select the ”DRF” softkey function. The ”DRF-handwheel” enable (” YES ”) is displayed on the CRT.
3 Operating Sequences 09.91 3.2.11 ”Actual value setting” mode (”PRESET”) 3.2.11 ”Actual value setting” mode (”PRESET”) • In the ”PRESET” operating mode, you can offset the control zero point to any point within the machine coordinate system.
11.90 3 Operating Sequences 3.2.11 ”Actual value setting” mode (”PRESET”) and PRESET Operate the operating mode selection key in the integrated machine control panel, and then the ”PRESET” softkey or ... ... set the operating mode selector switch on the external machine control panel to this symbol.
3 Operating Sequences 01.93 3.2.11 ”Actual value setting” mode (”PRESET”) The new ”Actual position” and the ”PRESET offset” for the X axis are displayed. In the same way you enter the values for the other axes, and subsequently operate the ”STORE” softkey after input for each axis.
09.91 3 Operating Sequences 3.2.12 ”Repositioning” mode (”REPOS”) 3.2.12 ”Repositioning” mode (”REPOS”) After a program interruption - e.g. after switching from ”AUTOMATIC operation” to ”JOG” or ”Incremental” (INC...) - you can traverse away from the contour.
3 Operating Sequences 09.91 3.2.12 ”Repositioning” mode (”REPOS”) and ... set the operating mode selector switch on the external machine control panel to this symbol. Prerequisite: You have generated a program interruption - e. g. by switching to “JOG” mode - and sub- sequently traverse away from the contour (see Section 3.
09.91 3 Operating Sequences 3.2.12 ”Repositioning” mode (”REPOS”) Using the direction keys, you traverse to the point of interruption. Note: A maximum of 2 axes can be traversed at one time. The feedrate override switch is active, the rapid override key is not active.
3 Operating Sequences 09.91 3.2.13 Scratching 3.2.13 Scratching If there is a breakdown during the program process, e. g. a tool breakage, you must leave the contour by changing to the ”JOG” or ”INC 1 ... INC 10 000” operating mode, in order to change the tool.
09.91 4 Monitoring Functions 4.1 General 4 Monitoring Functions 4.1 General The control contains permanently active monitoring functions which detect faults in the NC, the interface control and the machine at such an early stage that damage to the workpiece, tool or machine are practically eliminated.
4 Monitoring Functions 11.90 4.3 Display representation 4.3 Display representation There are 4 types of display representation: • Example of display representation type A Valid for alarm numbers 0 .... 39 und 2000 ...... 2999 (partly) max. 28 characters for explanatory text.
11.90 4 Monitoring Functions 4.3 Display representation • Example of display representation type C Valid for alarm numbers 2000 .... 2999 (partly) and 3000 .
4 Monitoring Functions 09.91 4.4 Alarm numbers and groups / delete alarms 4.4 Alarm numbers and groups/delete alarms The alarms are divided into 7 alarm groups (5 NC and 2 PLC alarm groups) NC alarms: • POWER ON alarms • RS232C (V.
11.90 4 Monitoring Functions 4.5 DIAGNOSTICS / selection of further alarms 4.5 DIAGNOSTICS/selection of further alarms When the diagnostics react, the reason could be several different faults occurring at the same time. Only the alarm with the lowest alarm number is displayed in the alarm line.
11.90 4 Monitoring Functions 4.6 Listing of the alarms / alarm description © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 4-5 SINUMERIK 810T, GA3 (BN).
4 Monitoring Functions 11.90 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 4 ”Incorrect unit system” Remarks: Alarm only on commissioning Alarm No. Alarm Text: 5 ”Too many input buffer parameters” Remarks: Alarm only on commissioning Alarm No.
11.91 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 14 ”RAM error memory module” Remarks: Alarm only on commissioning Alarm No. Alarm Text: 16 ”Parity error RS232C (V.24)” Reason: Effect: Remedy: Explanation: The last character transferred has incorrect parity.
4 Monitoring Functions 09.91 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 22 ”Time monitoring RS232C (V.24)” Reason: Remedy: Delay of 60 sec. for data transfer exceeded – Check external device – Check cable – Check setting data 5017 and 5025 – Set bit 0 to ”1”.
11.90 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 26 ”Block > 120 characters R232C (V.24)” Reason: Effect: Remedy: The part program block that has been read in contains more than 120 characters. Only the actual stored characters are counted (no blanks, no CR, .
4 Monitoring Functions 09.91 4.6 Listing of the alarms / alarm description Alarm No. AlarmText: 32 ”Data format error R232C (V.24)” Reason: Effect: Remedy: – The permissible number of decades af.
01.93 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 36 ”BTR aborted by the computer” Reason: Remedy: Part program received from BTR partner with error. Restart. Alarm No. Alarm Text: 40 ”Wrong data in MD 576*” Remarks: Alarm occurs on installation only Alarm No.
4 Monitoring Functions 01.93 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 112 * ”Clamping monitoring” Reason: Effect: Remedy: During positioning, the following error could not be eliminated faster than the time given in machine data 156.
11.90 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 156 * ”Set speed too high” Reason: Effect: Remedy: Within the control, a higher set speed was output than the value set in machine data 264*.
4 Monitoring Functions 01.93 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 184 * ”Stop behind ref. point” Reason: Effect: Remedy: When traversing to reference point, the axis.
01.93 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2031 ”Eval. (weighting) factor too high (MD 388*)” Remarks: Alarm only on commissioning Alarm No. Alarm Text: 2032 ”Stop during threading” Reason: Effect: During thread cutting, the feed per revolution was stopped, and the thread destroyed.
4 Monitoring Functions 09.91 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2039 ”Reference point not reached” Reason: Effect: Remedy: Explanation: Attention: The reference po.
09.91 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2046 ”Block greater than 120 characters” Reason: Effect: Remedy: There is an incorrect ”LF” in the memory, so that a block containing more than 120 characters exists.
4 Monitoring Functions 01.93 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2059 ”G92 program error” Reason: Remedy: – Use of an invalid address character – Error on cylindrical interpolation G92 is only allowed with address ”S” (programmed spindle speed limitation) or “P” (cylindrical interpolation) Alarm No.
11.90 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2064 ”Program error round (rotary) axis” Reason: Effect: Remedy: Explanation: If you round to either a half or full degree on a circular axis, the control will monitor whether the programmed positions correlate with the rounding.
11.90 4 Monitoring Functions 4.6 Listing of the alarms / alarm description © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 4-19 SINUMERIK 810T, GA3 (BN).
4 Monitoring Functions 11.90 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2072 ”Incorrect input value” Reason: Effect: Remedy: The input value for the contour path calculation cannot be calculated. The faulty block is not simulated or executed.
09.91 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2078 ”Incorrect input parameter” Reason: Effect: Remedy: – Programmed parameter sequence not allowed – Parameter sequence not complete for the described contour As for alarm 2072 As for alarm 2072 Alarm No.
4 Monitoring Functions 01.93 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2153 ”Control loop spindle HW” Reason: Effect: Remedy: As for alarm 132* – Inhibiting of NC START – Operation is brought to a defined standstill As for alarm 132* Alarm No.
01.93 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2184 ”M fnct. for C axis invalid” Alarm No. Alarm Text: 2189 ”Transformation undefined” Reason: Remedy: – Type of transformation not defined. – Option bit for the transformation not set.
4 Monitoring Functions 01.93 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 2194 ”G36 position rotary axis missing” Reason: Remedy: The alarm only appears with modulo programming. The alarm is triggered when a G68 is to be generated for the rotary axis in a G36 block: 1.
01.93 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 228* ”Option M19 missing” Alarm No. Alarm Text: M19 S... was programmed in the part program although this function is not implemented in the control. • Check program • Check NC MD • Upgrade with option E42 Alarm No.
4 Monitoring Functions 01.93 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 3004 ”CL800 Error” Reason: Remedy: – @ Function not implemented – Incorrect address after the @.
01.93 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 3007 ”Wrong setting data program” Reason: Remedy: – G25 / G26 has been programmed – G92 has been programmed with an address other than ”S” or ”P” – M19 has been programmed with an address other than ”S” As for alarm 3000 Alarm No.
4 Monitoring Functions 09.91 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 3012 ”Block not in memory” Reason: Remedy: – The program has not been terminated with M02/M30/M17.
11.90 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 3020 ”Option not available” Reason: Remedy: A function has been programmed which is not implemented in the system. – As for alarm 3000 – Retrofit option Alarm No.
4 Monitoring Functions 11.90 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 3028 ”Too many fields / variables” Remarks: Alarm only on commissioning Alarm No.
09.91 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 3042 ”Display description error” {serious error} Reason: Remedy: Explanation: An error has been found in the display description which cannot be exactly defined; e.
4 Monitoring Functions 01.93 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 3081 ”CRC not selected for approach” Remedy: CRC must have been selected before approach Alarm No. Alarm Text: 3082 ”Feed missing / not prog.” Explanation: Remedy: 1.
01.93 4 Monitoring Functions 4.6 Listing of the alarms / alarm description Alarm No. Alarm Text: 3201 ”Spindle not synchronous” Reason: Remarks: • Rotary axis operation has been initiated even though the spindle is not synchronous. Turn spindle again until it is synchronous.
11.90 5 Maintenance 5.1 Operating data 5 Maintenance 5.1 Operating data Humidity content to DIN 40040 F Air pressure 860 to 1080 hPa Shockproof, dustproof and waterproof to DIN 40050: – Operator panel IP 54 – External machine control panel IP 54 5.
5 Maintenance 01.93 5.2 Handling the modules • The power supply should be switched on before any signal voltages are applied. • Modules and components should always be stored and carried in conductive packing (e.g. metallised plastic boxes, metal containers).
11.90 5 Maintenance 5.3 Exchanging the battery in the battery receptacle Replacing the battery in the battery receptacle • The battery backs up: – The part-program RAM memory – The working memory – The PLC user memory – The machine data memory The back-up time of the battery is 1 year.
5 Maintenance 11.90 5.5 Cleaning 5.5 Cleaning The front of the monitor and the surface of the operating panel can be cleaned. For dirt that is relatively easy to remove, standard household washing-up liquid, or the industrial cleaner ”Special Swipe” can be used.
09.91 6 Data Interfaces 6.1 General 6 Data Interfaces 6.1 General There are 2 universal interfaces (RS232C (V.24) / 20 mA) available for data transfer: • Interface 1 , on the front of the control, is variable with regard to the connection possibilities of different devices.
6 Data Interfaces 11.90 6.2 Setting data for description of the interfaces Table 6.1: Description of the interfaces Inter- face 2 Inter- face 1 Setting data function Bit no.
01.93 6 Data Interfaces 6.3 Assignment of the setting data for the connection of peripheral devices 6.3 Assignment of the setting data for the connection of peripheral devices Before you connect a particular device to interface 1 (or interface 2), you must assign the setting data bits of the setting data defined in the following tables.
6 Data Interfaces 11.90 6.3 Assignment of the setting data for the connection of peripheral devices Setting data number (SD no.) and setting data bits, dependent on type of peripheral interface 5018 5019 5020 5021 5022 5023 RTS LINE Peripheral device Ident.
09.91 6 Data Interfaces 6.4 Device connection data 6.4 Device connection data SINUMERIK reader T40 and T50 Cable Order No. 6FC9 340-8S. Device data Transfer rate 9600 baud Character format start bit 8.
6 Data Interfaces 01.93 6.4 Device connection data Siemens Programmer PG 685/675/670/730/750 Interface S5 PLC Cable Order No.: 6FC9 340-8G 6FC9 344-4R (PG 750 / 730 only) Device data Interface: 20 mA .
11.90 6 Data Interfaces 6.4 Device connection data Siemens page printer PT80 Cable Order No.: 6FC9 340-8C RS232C (V.24 ) 6FC9 340-8T (20mA) Device data Transfer rate: 300 baud Character format: 1 Start bit 8 Data bits 2 Stop bits Order No. for PT80 to SINUMERIK specification: Type RS232C (V.
01.93 7 Interfacing to the Machine 7.1 General 7 Interfacing to the Machine 7.1 General The operating of the SINUMERIK 810T depends on the setting of the machine data, and the Options. In the basic version of the SINUMERIK 810T (Order no. 6FC3 251-1AC), the standard machine data are set in the works.
7 Interfacing to the Machine 01.93 7.2 Ordering data - Options 3rd auxiliary axis Tape reader type T40 Tape reader type T50 A03 B02 Identification No. of the NC control: (Serial No.
01.93 7 Interfacing to the Machine 7.2 Ordering data - Options Identification No. of the NC control: (Serial No., Ident., Inventory No. etc.) Function of the Option Order Code Option supplied with con.
09.91 7 Interfacing to the Machine 7.3 SINUMERIK 810T machine data © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 7-3 SINUMERIK 810T, GA3 (BN).
7 Interfacing to the Machine 09.91 7.3 SINUMERIK 810T machine data 7.3 SINUMERIK 810T machine data 7.3.1 General machine data In this section you will find tables of machine data, whose values can be changed from the standard values by the machine tool manufacturer at any time.
01.93 7 Interfacing to the Machine 7.3.1 General machine data Using the keyboard, now enter the number of the desired machine data and operate the search key. The machine data searched for, and the value stored in the control are displayed marked in inverse video.
09.91 7 Interfacing to the Machine 7.3.2 Definition of R parameters as cycle machine data, cycle setting data © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 7-5 SINUMERIK 810T, GA3 (BN).
7 Interfacing to the Machine 09.91 7.3.2 Definition of R parameters as cycle machine data, cycle setting data 7.3.2 Definition of R parameters as cycle machine data, cycle setting data To protect para.
11.90 7 Interfacing to the Machine 7.3.3 Machine data bits 7.3.3 Machine data bits In this section you will find tables of machine data, in the range from ”5000” to ”5684” . Their 8-bit ”Bit patterns” are preset by the machine tool manufacturer.
7 Interfacing to the Machine 01.93 7.3.3 Machine data bits Sequence of operation: calling machine data bits Sequence of operation as in the Section 7.3.1 for calling ”General machine data”, up to operating the ”NC MACHINE DATA” softkey, and then .
09.91 7 Interfacing to the Machine 7.3.4 Definition of the initial setting of the G groups 7.3.4 Definition of the initial setting of the G groups Previously the initial settings for the G groups 0 / 2 / 3 / 5 / 7 / 9 / 10 / 11 and 13 were defined permanently (For G group allocation see Section 12).
7 Interfacing to the Machine 01.93 7.3.4 Definition of the initial setting of the G groups NC MD for the initial settings of the G groups (CHANNEL DATA): 1 5 1 4 1 3 1 2 1 1 1 0 987654321 NC MD G grou.
09.91 7 Interfacing to the Machine 7.4 Setting data 7.4 Setting data 7.4.1 General SD bits SD 5000 Bit 0,1,2: As from the standard UMS03, the user interface and the cycles have been completely revised. The cycles have new and expanded functions. For these functions, new or modified cycle parameter assignments (R parameters) are required.
7 Interfacing to the Machine 01.93 7.4.3 Spindle-specific setting data 7.4.3 Spindle-specific setting data SD No. Significance 401* Spindle speed limitation for G96 402* Position for oriented spindle .
01.93 8 Appendix 8.1 List of abbreviations 8 Appendix 8.1 List of abbreviations Mnemonics Meaning BCD Binary coded decimal CH1 Channel 1, main channel CH2 Channel 2, auxiliary channel CLF Clear file C.
8 Appendix 01.93 8.1 List of abbreviations Mnemonics Meaning RAM Program memory which can be written into and read from ( r andom a ccess m emory) RPA R parameter numbers with value assignment ( R p a.
01.93 8 Appendix 8.2 List of terms used 8.2 List of terms used Term Section Acknowledge alarm 2.1.1.5 Acknowledge messages 4.6 Actual position 2.1.1.5 Actual value setting 2.3.2 Actual value setting (Preset) 3.2.7 ADD.FUNCT. 2.5 Address / numerical keys 2.
8 Appendix 09.91 8.2 List of terms used Term Section COPY 2.5 CORR. BLOCK 2.5 CRT display 21.1.1 CURRENT BLOCK 2.5 CURRENT VALUES 2.5 Cursor 2.1.1.5 CYCLES 2.5 DATA IN - OUT 2.5 Data input / output 3.1.15 DATA IN START 2.5 DATA OUTPUT 2.5 DEC-SBL YES-NO 2.
09.91 8 Appendix 8.2 List of terms used Term Section EMERGENCY STOP 2.5 ENABLE 2.5 Enable 3.2.9 / 3.2.10 ERASE 2.5 Erase 3.1.14 EXT START 2.5 External machine control panel 2.1.2 / 2.1.2.1 FEED 2.5 Feed 2.1.1.6 ”Feed hold” display 2.1.1.2 Feed / jog 2.
8 Appendix 09.91 8.2 List of terms used Term Section MACHINING CYCLE 2.5 MACH. DATA 2.5 MAIN PROGRAM 2.5 MAINPRG START 2.5 Maintenance 5 Manual data input automatic 2.3.2 MDI automatic 3.2.4 Menu tree 2.3.5 Menu trees for the operating modes 2.4 Modify word 2.
09.91 8 Appendix 8.2 List of terms used Term Section PART PROGRAM 2.5 PLANE 2.5 PLAYBACK 2.5 Playback 3.2.6 PLC ALARM 2.5 PLC / MD 2.5 PLC MESSAGE 2.5 PLC STATUS 2.5 ”Position not yet reached” display 2.1.1.2 PROGRAM CONTROL 3.2.3.1 PROGRAM HANDLING 2.
8 Appendix 09.91 8.2 List of terms used Term Section Reset with change of mode 2.3.4 ROTAT. ANGLE 2.5 R PARAMETER 2.5 R Parameter 3.1.6 R Parameter setting data 3.1.6 SCALE MODIF. 2.5 Scratching 3.2.13 Search address, block no., word or data 2.1.1.5 Semi-automatic tool compensation offset 3.
01.93 8 Appendix 8.2 List of terms used Term Section START 2.5 STOP 2.5 STRAIGHT LINE 2.5 STORE 2.5 STORE AXES 2.5 STORE MENU 2.5 STORE SELECT 2.5 SUBROUTINE 2.5 SW VERSION 2.5 Switching off 2.2.2 Switching on 2.1.2.1 / 2.2.1 SUBROUTINE START 2.5 Teach in 3.
8 Appendix 09.91 8.3 SINUMERIK 810T operator interface - Layout 8.3 SINUMERIK 810T operator interface - Layout SINUMERIK 810T with integrated machine control panel SINUMERIK SIEMENS B A • • • .
09.91 8 Appendix 8.3 SINUMERIK 810T operator interface - Layout SINUMERIK 810T with external machine control panel Integrated customer operator panel with 20 freely assignable operating elements or SI.
Een belangrijk punt na aankoop van elk apparaat Siemens 810T (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Siemens 810T heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Siemens 810T vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Siemens 810T leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Siemens 810T krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Siemens 810T bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Siemens 810T kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Siemens 810T . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
