Gebruiksaanwijzing /service van het product SpeedStream SS2604 van de fabrikant Siemens
Ga naar pagina of 85
SpeedStream SpeedStream SpeedStream SpeedStream ® 4-Port DSL/Cable Router Model S S2604 Part No. 007-0113-001.
T ABLE OF C ONTEN TS CHAPTER 1 IN TRODUCTION.............................................................................................. 1 Features of the DSL/Cable Router .............................................................................
ii APPENDIX A TROUBL ESHOOT ING ................................................................................ 77 Overview ....................................................................................................................... ... 77 General Problem s .
1 Chapter 1 Introduction This C hapter provi des an overview of the SpeedStream 4-Port DSL/ Cable Router's features and capabilities. Congratu lations on the purch ase of y our ne w SpeedStream DSL /Cable Rou ter, com mon ly referred to as a Broadb and Router.
DSL/Cable Rout er User Guide 2 • Fixed or Dynamic IP Address. On the Internet (WAN port) connection , the DSL/ Cable R outer su pports both Dynam ic IP Address (IP A ddress is allocated on connec- tion) an d Fixed IP Addres s. A dvanced Internet Functions • Conferencing & Telephony Applications.
Introduc tion 3 Security Features • Password - protected Configuration . Option al pass w ord protection is provi ded to pre vent una uthor ized user s from modi fying the co nfigurat ion d ata and se ttings.
DSL/Cable Rout er User Guide 4 LAN Ports (1, 2, 3, 4) For each LA N port, there are 2 LEDs • Link/Act • On - C o rrespondin g LAN (h ub) port is active. • Off - No active con nection on the correspon ding L AN (h ub) port. • Flashing - Data is being transm itted or received via the corre- spondi ng L AN (hu b) port.
Introduc tion 5 2. Hold the Reset Button down w hile you Pow er On the router. 3. Continue holding th e Reset Button until the Status (Red) LED blinks T W ICE. 4. Release the Reset Button. The factory default con figu ration has now been restored, and the Router is ready f o r use.
6 Chapter 2 Installation This C hapter covers the physical install ation of the SpeedStr eam DSL/C able Router. Requirements • DSL or Cable m odem, and an Internet A ccess account w ith an ISP, for shared In ternet access.
Installatio n 7 3. Connect WA N Cable Connect th e DSL or Cable m odem to the WAN port on the DSL/C able Router. Use the ca- ble suppl ied w ith y our DSL /Cable m odem. . 4. Connect Print er Cable Use a standard parallel printer cable to co nnect y o ur printer to the Printer port on the DSL/Cable Ro uter.
8 Chapter 3 Setup This C hapter provi des details of the Setup proces s. Overv iew This chapter describes th e setup procedure for: • Internet A ccess • LAN confi gurat ion • Assigning a Pa ssword t o pr ote ct the confi gurati on da ta. PCs on your local LA N may also require config uration.
Setup 9 Configurati on Program The DSL/Cable Rou ter contains an HTTP server. This enables y ou to connect to it, an d config- ure it , using your W eb Br owser. Your B rowser m ust support JavaScript . The co nfigurat ion program has been tes ted on th e follow ing brow sers: • Netscape V4.
DSL/Cable Rout er User Guide 10 If you can't connect If the R outer does not res pond, check the follow ing: • The DSL/Cable Router is properly installed, LAN connection is OK, an d it is pow ered ON. You can test the conn ection by using the "P ing" comm and: • Open th e MS-D OS w indow or comm and prom pt w indow.
Setup 11 Setup Wizar d The first time y ou connect to the DSL/Cable Router, the Setup Wizard w ill run autom atically. (The Setup Wizard will also run if th e Ro uter's defau lt settings are restored.) 1. Step thro ugh the Wi zard until finished.
DSL/Cable Rout er User Guide 12 DSL Modems Connection Ty pe Details Data Required PPPoE You c onn ect to th e ISP only w hen requ ired. The IP address is allocated au to- matically . Usernam e and passw ord. Note that this is the Usernam e and passw ord for Internet access , not for E-m ail.
Setup 13 Home Screen After f inishing the Setup Wizard , you w ill see the Home screen. When y o u connect in the future, y ou will see this screen w hen y o u connect.
DSL/Cable Rout er User Guide 14 LA N Screen Use the LAN link on the m ain menu to reach the LA N screen A n example s creen is sh ow n below . Figure 5: LAN Screen Data - L A N Scre en TCP/IP IP Address IP address for the DSL /Cable Router, as seen f rom the local LA N.
Setup 15 DHCP What DHCP Does A DHCP ( Dynamic Host Configur atio n Pr oto co l) server allocates a valid IP address to a DHCP client (PC or device) upon request .
DSL/Cable Rout er User Guide 16 Passw ord Screen The passw ord screen allows you to assig n a passw ord to the DSL/C able Router. Figure 6: Password Screen Once y ou hav e assign ed a password to th e DSL/Cable R outer (on th e Passwo rd screen above) you w ill be pr ompted for the passw o rd when you conn ect, as shown below.
17 Chapter 4 PC Configuration This C hapter detai ls the PC Configur ation required on the l ocal ("Internal ") LAN. Overv iew For each PC, the f ollowi ng m ay to be config ured: • TCP /I.
DSL/Cable Rout er User Guide 18 Checking TCP/IP Settings - Window s 9x/Me 1. Select Contr ol Panel - Net work . You shou ld see a screen lik e the followin g: Figure 8: Network Configuration 2. Select the TCP/IP protocol for y our netw ork card. 3. Click on the Pr operties b utton.
PC Configurat ion 19 • On the Gateway tab, enter the DSL /Cable Router' s IP address in the New Gateway fi eld and click Add . You r LA N admi nistrator can advise you of the IP Address they assigned to the DSL/C able Router. Figure 10: Gateway Tab (Win 95/98) • On the DN S Configurati on tab, ensure Enable DN S is selected.
DSL/Cable Rout er User Guide 20 Checking TCP/IP Settings - Window s NT4.0 1. Select Contr ol Panel - Net work , and, on th e Protocols tab, sel ect the TCP/ IP protocol, as show n below . Figure 12: Win dows NT4.0 - TC P/IP 2. Click the Pr operties button to see a s creen like th e one below .
PC Configurat ion 21 Figure 13: Win dows NT4.0 - IP Ad dress 3. Select the netw ork card for y our LAN. 4. Select t he appropriate radio button - Obtain an IP address f rom a DHC P Server or Specify an IP Address , as explained below . Obtai n an IP address from a DHCP Server This is the default Windows setting.
DSL/Cable Rout er User Guide 22 Figure 14 - Win dows NT4.0 - Ad d Gateway 2. The DNS sh ould be set to the addres s provided by y our ISP, as foll ow s: • Click the DNS tab. • On the DNS screen, sh own below, click th e Add butto n (und er DNS Service Search Order ), and enter the DNS prov ided by y our ISP.
PC Configurat ion 23 Figure 15: Win dows NT4.0 - DNS.
DSL/Cable Rout er User Guide 24 Checking TCP/IP Settings - Window s 2000: 1. Select Contr ol Panel - Net work and Di al-up Connecti on . 2. Right clic k the Local Area Connection icon and select Properti es . You sh ould see a screen like the follow ing: Figure 16: Network Configurati on (Win 2000) 3.
PC Configurat ion 25 Figure 17: TCP/ IP Properties (Win 2000) 5. Ensu re you r TCP/IP settings are correct: Using DHCP To use DHCP, select the radio button Obtain an IP Addr ess autom aticall y . This is the default Windo ws settings. Restart y our PC to ensure it obtains an IP Address f r om th e DSL/Cable Router.
DSL/Cable Rout er User Guide 26 Checking TCP/IP Settings - Window s XP: 1. Select Control Panel - Netw ork Connection . 2. Right clic k the Local Area Connection and choose Pr operties . You sh ould see a screen like the follow ing: Figure 18: Network Configuration (Windows XP) 3.
PC Configurat ion 27 Figure 19: TCP/ IP Properties (Windows XP) 5. Ensu re you r TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Addr ess autom aticall y . This is the default Windo ws settings. Restart y our PC to ensure it obtains an IP Address f r om th e DSL/Cable Router.
DSL/Cable Rout er User Guide 28 Internet A ccess To configure y our PCs to use the DSL/ Cable Router f or Internet access : • Ensure that th e DSL modem, Cable m odem, or other perman ent connection is f unctional.
PC Configurat ion 29 Printer Setup for Window s The DSL/ Cable Router prov ides prin ting su pport for 2 met hods f o r printi ng f rom Window s: • Printer Port Driver. After in stalling the Printer Port Driver, Windows users can print directly to th e DSL/C able Router.
DSL/Cable Rout er User Guide 30 Under Windows 95, if you see the follow ing error message, either install Internet Explorer 4 or later, or follow the proce- dure in the "Trouble Shooting - Printing" section of A ppendix A .
PC Configurat ion 31 Figure 21: Print Port C onfiguration Items show n on this s creen are as follow s: Port If desired, click Browse to select a dif ferent dev ice. (T he Select Device Port button is provided to allow this softw are to work with mu lti-port models.
DSL/Cable Rout er User Guide 32 LPD/LPR Printing LPD/L P R print ing can be us ed with Window s NT 4.0 Server or Win dow s 2000. No sof tware needs to be installed on client PCs. Window s NT 4.0 Server Configuration To use LP D p rint ing, M icrosoft TCP/IP Printing m ust be installed an d enabled.
PC Configurat ion 33 Window s 2000 Server Configurati on The LPD/LPR Port is not en abled by default. To enable it, use this procedure: 1. In Cont rol Panel , select Add/Remove Progr ams , then Windows C omponents . 2. Select Other N etwork Fi le and Print Ser vices , then click the Details button.
DSL/Cable Rout er User Guide 34 Figure 23: Win dows 2000: Select Port 4. In the Dialog requestin g Nam e or Addres s of ser ver providing lpd , enter the IP address of the DSL/C able Router. 5. For Name of printe r or pri nt queue on that s erver , en ter L1 6.
PC Configurat ion 35 Maci ntosh Clie nts From y our Macintosh, y ou can access the Intern et via the DSL/Cable R outer. The procedure is as follows. 1. Open the TCP/IP Control P anel. 2. Select Ethernet from the Connect via pop-u p me nu. 3. Select Using DHCP Server fro m the Configure pop- up menu .
DSL/Cable Rout er User Guide 36 2. Select Add . For the printer type, select Remote Unix (lpd) Queue . 3. Use the follow ing data to co mplete the resu lting dialog. Field Data Example Name En ter a nam e for this printer gw _ prn Spool Directory /var/spool/lpd / printe r_name Where print er_name is the "Name" entry above.
37 Chapter 5 Operation and Status This C hapter detail s the operati on of the DSL/ Cable Router and the status screen s. Operation Once both the DSL/Cable Router and the PCs are configured, operation is autom atic.
DSL/Cable Rout er User Guide 38 Status Screen Use the Status link on th e main men u to view this screen. Figure 24: Status Screen Data - Stat us Screen Internet Connection M ethod This indicates the current connection m ethod, as set in the Setup Wizard.
Operation and St atus 39 questing the Internet connection . • Destination - The Internet address w hich w as requested. If the URL Filter is enabled, this address will be show n as a URL. Otherw ise, the IP ad dress will be displayed. • Block ed - If t he reques t w as blocked by the URL Filter function, this w ill display "Yes" .
DSL/Cable Rout er User Guide 40 Connection Status - PPPoE If u sing PPPoE (PPP over Et her net ), a s creen li ke the follow ing exam ple w ill be displayed wh en the "Co nnection Details" button is clicked.
Operation and St atus 41 • The "Clear Log" button will restart the L og, wh ile the Re- fresh button w ill upd ate the messages show n on screen. Buttons Connect If not conn ected, establish a connection to y our ISP. Disconnect If co nnecte d to your I SP, hang up the co nnec tion.
DSL/Cable Rout er User Guide 42 Connection Status - PPTP If using PP T P (P ee r-to-P eer T unneling P ro toco l), a scre en like the fo llowing example will be displayed wh en the "Connection Details" button is clicked.
Operation and St atus 43 Buttons Connect If not conn ected, establish a connection to y our ISP. Disconnect If co nnecte d to your I SP, hang up the co nnec tion. Clear Log Delete all data currently in the Log . This will m ake it easier to read new m essages.
DSL/Cable Rout er User Guide 44 Conn ection Details - Fixed/Dy n amic IP A ddress If y our access m ethod is neither PPPoE nor PPTP, a screen like th e follow ing exam ple w ill be displayed wh en the "Connection Details" button is clicked.
Operation and St atus 45 Buttons Release/Renew Button w ill display EITHER "Release" OR "Renew" This button is only usef ul if th e IP addr ess shown above is allocated automatically on connection. (Dyn amic IP address). Otherw ise, it has no effect.
46 Chapter 6 Advanced Features This C hapter explains when and how to us e the DSL/C able Router's "Ad- vanced" Features. Overv iew All advan ced features are accessed via th e Advanced m enu. The follow ing advan ced features are provided.
Advanced Features 47 Figure 28: Advanced Internet Screen Conferencing & Telephony Most applicat ions are s upported tran sparentl y by the DSL /Cable R outer.
DSL/Cable Rout er User Guide 48 Conferencing & Telephony Select an Application This lists applicatio ns w hich may generate incoming conn ections, where the d est inatio n (o n your l oca l LAN) i s unknown. Send incoming calls to This lists the PCs on your LAN.
Advanced Features 49 Data - Special A ppl ications Screen Checkbox Use this to Enable or Disable this Special Application as required. Name En ter a descriptive name to identify this Special Application. Incoming Ports • Type - Select the protocol (TCP or UDP) used w hen y ou receive data from the special application or s ervice.
DSL/Cable Rout er User Guide 50 The "DM Z PC" is effectiv ely outside the Firewall, mak- ing it more v ulnerable t o attacks. Fo r this reason, you should only e nable the DMZ feature when required. URL Filter The URL Filter allows y ou to b lock access to undesirable Web sites.
Advanced Features 51 Add Filter String T o add an entry to the list, en ter it here, and click the "Add" button. An e n t r y ma y b e a D o ma i n na me ( e . g. www. t r a sh . c o m) o r si mp l y a string . (e.g. ads/ ) Any URL that contains A NY entry A NYW HERE in the URL w ill be blocked.
DSL/Cable Rout er User Guide 52 Virtual Servers This feature allow s you to m ake Servers on y our LAN access ible to Internet u sers. Norm ally, Internet u sers w ould not be able to access a serv er on your LA N because: • Your Se rver do es not ha ve a val id ext ernal IP Addr ess.
Advanced Features 53 Virtual Serv ers Screen The Virtual Server s screen is reached by the Virtual Server s link on th e Advanced screen. A n exam ple screen is show n below. Figure 32: Virtual Servers Screen This screen lists a number of pre-defined Serv ers, and allow s you to def ine y our own Servers .
DSL/Cable Rout er User Guide 54 External Port No. The port num ber used by In ternet users when con necting to the Server. This is norm ally th e same as th e Internal Port Num b er.
Advanced Features 55 View all Settin g s of all Servers Click the "Show All" button. This will gen erate a report in a new win dow , w here is can be printed or saved, as w ell as view ed. From the Internet, A LL Virtual S ervers have the IP A d dress allocated b y your ISP.
DSL/Cable Rout er User Guide 56 Dy na mic DNS Scre en Select Advanced on the main menu, then Dynamic DNS , to see a screen like the f o llowi ng: Figure 33: DDNS Screen Data - Dynamic DNS Screen DDNS Service DDNS Service • You m ust sign u p first to create a n ew account bef o re using the service.
Advanced Features 57 Remote Management This feature allow s you to m anage the DSL/Cable R outer via th e Internet. Figure 34: Rem ote Screen Data - R emote Manage ment Scre en Remote Management Enable Remote Managemen t Enable to allow m anagemen t via the In ternet.
DSL/Cable Rout er User Guide 58 A ccess Control This feature is acces sed by the Access Con trol l ink on the Advanc ed menu. Overv iew The Access C ontrol featu re allow s adm inist rators to restrict Intern et Access by in dividual PCs. With the defau lt settings , every one has u nrestricted Intern et access.
Advanced Features 59 A ccess Control Screen To view this screen, select th e Access Co ntro l link o n the Adva nced menu. Figure 35: Access Control Screen Data - A ccess Control Screen Group Select Group Select th e d esired Group. T he screen w ill upd ate to display the settings for the selected Group.
DSL/Cable Rout er User Guide 60 Use List Below - block Selected Services You can select w hich Services are allow ed, and w hich are blocked. Use this to gain f ine control over a group. Services Defined Services Select the applications you w ish to b lock.
Advanced Features 61 Group Members Screen This screen is displayed wh en the Members button on the Access Con trol screen is clicked. Figure 36: Grou p Memb ers Use this s creen to add or rem ove mem bers (PCs) from th e current group.
DSL/Cable Rout er User Guide 62 Services Screen This screen is displayed wh en the Services button on the Access Co ntro l screen is clicked. Figure 37: Services Data - Services Screen A v ailable Serv ices Available Services This lists all the available services.
Advanced Features 63 New Service" area on screen. Cancel Clear the " Add New Service " area, ready for en tering data f or a new Service. Firm w ar e Upgrade The firm ware (softw are) in the DSL/ Cable Rout er can be upgraded u sing you r Web Browser.
64 Chapter 7 Advanced Configuration This Chapter explains the settings available via the Advanced configuration section of t he "Advanced" menu.
Advanced Conf iguration 65 Netw ork Clients Screen The Network Clients database is used w henever y ou need to select a PC (e.g. for th e "DMZ" PC). It elimin ates the need to en ter IP addresses. A n exam ple Network Clien ts screen is shown below .
DSL/Cable Rout er User Guide 66 Buttons Add This will add the new PC to the list. T he PC will be sent a "ping" to determine its h ard ware address. If th e PC is not available (not con- nected, or not powered On) y o u w ill not be able to add it.
Advanced Conf iguration 67 Options This screen allow s advanced u sers to enter or ch ange a n umber of se ttings. For n o rmal opera- tion, there is n o need to use th is screen or ch ange an y s ettings.
DSL/Cable Rout er User Guide 68 Allow Internet access to be disabled • If check ed, then UPnP us ers can disable In ternet access v ia this device. • If Disabled, UPnP users can NOT disable Internet access via this device.
Advanced Conf iguration 69 Printer Port Pr inter Po rt confi gurat ion i s only re quir ed if using LP D pr inti ng under Linux o r Unix. Othe r- w ise, these s ettings are ig nored. Under L PD, the DSL /Cable Rout er supports 3 " Logical Printers ".
DSL/Cable Rout er User Guide 70 MAC A ddress The MAC (hardw are) ad dress is a low-level n etw ork identifier. It m ay be called "MAC A d- dress", "Hardware A ddress", or " Physi cal Address ". On a PC, this address is associated w ith the Netw ork card or adapter.
Advanced Conf iguration 71 Routing Overv iew • If you do n't have o ther Route rs o r Ga teways on your LAN, you can igno re the " Rout ing" page completely . • If the DSL /Cable Router is only acting as a Gatew ay for th e local LA N segm ent, ignore the "Ro uting" pa ge eve n if your LAN has o ther Route rs.
DSL/Cable Rout er User Guide 72 Figure 43: Routing Screen Data - Routi ng Screen RIP Enable RIP Check this to enable the RIP (Routing In form ation Protoco l) feature of the DSL /Cable Rout er. The DSL /Cable R outer supports RIP 1 onl y. Static Routing Static Rout ing Table Entrie s This list shows all entries in th e Routing Table.
Advanced Conf iguration 73 Buttons Save Save the RIP setting. This has no eff ect o n the Static Routing Table. Add Add a new entry to the Static Routing table, usin g the data show n in the "Properties" area on screen. The entry s e lected in the list is ignor ed, and has no e ffect.
DSL/Cable Rout er User Guide 74 Static Routing - Example Router B (192. 168 .1. 90) (192. 168 .2. 70) Router A Seg ment 0 Seg ment 2 Seg ment 1 DSL/Ca ble (192. 168 .254 .xx ) (192. 168 .1. xx ) (192. 168 .254 .1) (192. 168 .2. xx ) (192. 168 .1. 80) Router (192.
Advanced Conf iguration 75 Security The security screen is acces sed by the Security optio n on the Advanc ed menu. Figure 45: Security Screen Data - S ecurity Scree n Firewall Enable DoS Firewall If enabled, DoS (Denial of Service) attack s will be detected and blocked.
DSL/Cable Rout er User Guide 76 ICMP (Ping) Respond to ICMP (ping) The ICMP protocol is used by the "ping" and "traceroute" programs , and by netw ork m onitoring an d diagnostic program s. • If check ed, the DSL/Cable Router w ill respo nd to ICMP packets received from the Internet.
77 Appendix A T roubleshooting This Appendix cover s the most likely probl ems and their s o lutions. Overv iew This chapter covers some com mon problem s that may be encountered w hile using the DSL/Cab le Ro uter a nd so me possib le so lutions t o them.
DSL/Cable Rout er User Guide 78 Soluti on 2: The DSL/Ca ble Ro uter pr oce sses the d ata p assing thr ough it , so it is not transparent. Use the Special Appl ications feature to allow the use of In ternet applications wh ich do not function correctly .
Appendix A - Troubleshoot ing 79 4. The printer wizard w ill disp lay a m essage stating that "The Network Printer is off-line". This is OK. Continue the A d d Printer Wizard until finished . 5. When f inish ed, go to Con trol Pan el-Printers .
DSL/Cable Rout er User Guide 80 8. Click OK to see the Print Port Configura tion screen, as sh own below . 9. Click the Brow se Device button, select the dev ice nam e of the desired DSL/Cable R outer, and click OK. 10. Click OK to return to the Printers folders, and righ t-click on th e Printer.
81 Appendix B Specifications SpeedStream 4-Port DSL/Cable Router Model SS2604 DSL /Cable Rout er Dimensions 2 04 mm(W) * 127 mm(D) * 29 mm(H)----Up da te fo r ne w case and put in inches an d mm Opera.
82 Appendix C T echnical Support Before contact ing techni cal support , please refe r to the previ ous Troubles hootin g inf ormation. If y ou are still unable to resolve the problem, be prepared to .
Een belangrijk punt na aankoop van elk apparaat Siemens SpeedStream SS2604 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Siemens SpeedStream SS2604 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Siemens SpeedStream SS2604 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Siemens SpeedStream SS2604 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Siemens SpeedStream SS2604 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Siemens SpeedStream SS2604 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Siemens SpeedStream SS2604 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Siemens SpeedStream SS2604 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
