Gebruiksaanwijzing /service van het product JU-WR0012-S1 van de fabrikant Siig
Ga naar pagina of 20
1 Wireless-N High Power USB Wi-Fi Adapter Quick Installation Guide 04-0868A Introduction The Wireless-N High Power USB Wi-Fi Adapter adds high speed wireless network connectivity to any USB port equipped computer. Key Features and Benefits • MIMO technology improves data throughput and range • Supports 2.
2 System Requirements • Laptop or desktop computer with an available USB port • Windows ® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2 • Mac OS X 10.
3 Windows Installation WLAN AutoConfig Service For Server 2008 & 2008 R2, WLAN AutoConfig Service needs to be enabled before driver installation. Follow the instructions below to enable the feature. For other Windows OSes, go directly to Driver Installation on next page.
4 4 . Click Install then click Close . Driver Installation Connect the USB Wi-Fi Adapter to your computer using the included USB cable, then follow the instructions below to install the driver. Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server 2008 R2 1 .
5 Windows Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 (32-/64-bit) / Server 2008 (32- /64-bit) 1 . Insert the driver CD. Close CD autoplay window if prompted. 2 . Click Cancel at the Found New Hardware. Skip this step if not prompted. 3. Click Start , Run , type D:Windows setup.
6 To Verify Windows Installation 1 . Go to Device Manager to verify installation. For Windows 8 / Windows 7 / Windows XP / Server 2003 : Right click Computer or My Computer , click Manage , then click Device Manager . For Windows Vista : Right click Computer , click Manage , click Continue , then click Device Manager .
7 Right click the RaUI icon in the taskbar, then select Use Zero Configuration as Configuration Utility to configure by WZC, or select Use RaConfig as Configuration Utility to configure by RaUI. See Figure 3. For Windows 8, Windows 7, Vista, WZC and RaUI can be used together and no need to do the selection before the connection.
8 Double click the preferred wireless network from the accessible network list. Type in the network key if required, click Connect , click Connect Anyway . For advanced settings, click Change advanced settings , select tab Wireless Networks , then click Properties .
9 Figure 7 Select the Network Authentication and Data Encryption type, click OK to save the settings. OK Authentication Encryption Ralink UI Double click the Ralink icon in the taskbar.
10 Search and connect to an available network 1 . Click the Available Networks icon on the Ralink UI main menu. 2 . At the prompted Available Networks list, click your preferred network, then click the Connect button. 3 . At the prompted Profile Settings window, choose the Authentication and Encryption type, then click the arrow button.
11 5 . Once the network is connected, there will be a check next to the selected network. View Link Information 1 . Once the wireless network is successfully connected, the RaUI icon turns to green , and the Windows network shows connected. 2 . Click the Link Information icon on the Ralink UI main menu to view the connection details.
12 3 . Follow the on-screen instructions to add a profile. Once the profile is added, it will be listed on the Profile list page. Figure 11 Plus Mac OS X Installation 1 . Insert the driver CD, double click the Drivers icon on the desktop. 2 . Double click Mac folder.
13 Mac Wireless Network Configuration Click the Ralink icon in the taskbar, click Turn on internet sharing for AP mode, click Turn Off Internet sharing for regular usage. Figure 12 Search and connect to an available network 1 . Click the Site Survey tab on the Wireless Utility main menu.
14 3. At the prompted window, select the Authentication and Encryption type, type in your WPA Preshared key, then click OK . Figure 14 OK Authentication Encryption WPA Preshared key 4. Once the connection is successfully established, check System Preferences- Network , the bullet in front of 802.
15 Figure 15 Green bullet before 802.11 n WLAN means successful connection. View Link Information 1 . Click the Link Status tab on the Wireless Utility main menu to view the connection details.
16 Figure 16 Link status Add Profile 1 . Click the Site Survey tab on the Wireless Utility main menu. 2 . Click your preferred network from the networks list, then click the ADD PROFILE button. See Figure 13 on page 13. 3 . At the prompted window, complete the System Configuration and Authentication & Security Configuration, then click OK .
17 Figure 17 Figure 18 4 . Once the profile is successfully added, it will show on the Profile page..
18 Application Router USB type A to mini B cable Desktop or notebook computer Figure 19.
19 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
PRODUCT NAME Wireless-N High Power USB Wi-Fi Adapter FCC RULES: TESTED TO COMPL Y WITH FCC P AR T 15, CLASS B OPERA TING EN VIRONMENT : FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules.
Een belangrijk punt na aankoop van elk apparaat Siig JU-WR0012-S1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Siig JU-WR0012-S1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Siig JU-WR0012-S1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Siig JU-WR0012-S1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Siig JU-WR0012-S1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Siig JU-WR0012-S1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Siig JU-WR0012-S1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Siig JU-WR0012-S1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
