Gebruiksaanwijzing /service van het product Q6045-E van de fabrikant Axis Communications
Ga naar pagina of 24
AXIS Q60 Series AXIS Q6042-E PTZ Dome Network Camera AXIS Q6044-E PTZ Dome Network Camera AXIS Q6045-E PTZ Dome Network Camera E N G L I SH Installation Guide.
Legal Considerations Video surveillance can be regulated by laws that vary from country to country . Check the laws in your local region before using this product for surveillance purposes. This product includes one (1) H.264 decoder license. T o purchase further licenses, contact your reseller .
Australia/New Zealand This digital equipment fullls the requirements for RF emission according to the Class A limit of AS/NZS CISPR 22. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product.
.
AXIS Q60 Series Safety Infor mation Read through this Installation Guide carefully before installing the product. K eep the Installation Guide for future reference. Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury .
AXIS Q60 Series Safety Instructions WARNING • The Axis product shall be installed by a trained professional. NO NO NO TICE TICE TICE • The Axis product shall be used in compliance with local laws and regulations. • Store the Axis product in a dry and ventilated environment.
AXIS Q60 Series WARNING • Risk of explosion if the battery is incorrectly replaced. • Replace only with an identical battery or a battery which is recommended by Axis. • Dispose of used batteries according to local regulations or the battery manufacturer's instructions.
8.
AXIS Q60 Series Installation Guide This Installation Guide provides instructions for installing AXIS Q6042-E/Q6044-E/Q6045-E PTZ Dome Network Camera on your network. For other aspects of using the product, see the User Manual available at www .axis.com Installation Steps 1.
AXIS Q60 Series Optional Accessories • AXIS T91A Mounting Accessories • Smoked dome cover • RJ45 IP66-rated Cable with Premounted Connector (CAT6) 5 m • AXIS T83 10 Video Surveillance Control Board • AXIS T90A Illuminators • Installation Display • Midspan For information about available accessories, see www .
AXIS Q60 Series 5 P art number (P/N) & Serial number (S/N) 6 P ower button 7 Heater 8 Control button 9 Status LED indicator 1 0 SD card slot (SDHC) Dome Cover 1 2 3 4 5 6 1 Dome bracket screw PH2 .
AXIS Q60 Series Sunshield 2 1 1 Screw holes 2 Holes for unit holders LED Indicators LED Color Indication Unlit Connection and normal operation Amber Steady during startup. Flashes during rmware upgrade. Amber/red Flashes amber/red if network connection is unavailable or lost.
AXIS Q60 Series Green, ashing Fast ash when input voltage is out of range or other internal error . AC Green Steady when AC power input connected. Connectors and Buttons For specications and operating conditions, see page 13 . Specications Operating Conditions The Axis product is intended for outdoor use.
AXIS Q60 Series Install the Hardware NO NO NO TICE TICE TICE • The AXIS product shall be connected using a shielded network cable (STP). All cables connecting the product to the midspan shall be shielded (STP) and intended for their specic use. Make sure that the midspan is properly grounded.
AXIS Q60 Series 3. Make sure the rubber gasket is tted correctly on the dome cover . 4. Align the bulge on the dome cover with one of the logotypes on the dome ring. 5. Attach the dome bracket and the dome cover to the dome ring and tighten the screws (torque 1.
AXIS Q60 Series 3 4 2 1 5 1 Network connector – RJ45 Push-pull Connector (IP66) 2 Network connector and network connector shield 3 Ground screw T20 4 Washer 5 Cable shoe 5. Attach the grounding wire to the cable shoe using cable shoe pliers. 6. Put the cable shoe and washer back in their original positions and tighten the screw (torque 0.
AXIS Q60 Series 1 2 3 4 1 Screw T30 (3x) 2 Slot for unit holder (3x) 3 Safety wire 4 Wall bracket (mounting example) 1 1. Install the supplied midspan. See page 17 . Install the Midspan The supplied midspan enables Axis network video products with high power consumption to receive data and power over the same network cable.
AXIS Q60 Series 1 2 3 4 1 Data and power out (connect to Axis product) 2 Data in (connect to network) 3 AC input LED indicator 4 P ort LED indicator 4. Make sure that the LEDs on the midspan indicate the correct conditions. See Midspan LED Indicators on page 12 .
AXIS Q60 Series 4. The process is now complete. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90 5. Using the installation and management software tools, assign an IP address, set the password and access the video stream.
.
Regulatory I nformation USA This equipment has been tested using an unshielded network cable (UTP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.
.
.
Installation Guide V er . M2.7 AXIS Q60 Series Date: July 20 14 © Axis Communications AB, 20 14 P art No. 58978.
Een belangrijk punt na aankoop van elk apparaat Axis Communications Q6045-E (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Axis Communications Q6045-E heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Axis Communications Q6045-E vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Axis Communications Q6045-E leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Axis Communications Q6045-E krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Axis Communications Q6045-E bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Axis Communications Q6045-E kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Axis Communications Q6045-E . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
