Gebruiksaanwijzing /service van het product Fabia (2014) van de fabrikant Skoda
Ga naar pagina of 223
SIMPLY CLEVER ŠKODA Fabia Owner's Manual.
Layout of this Owner's Manual (explanations) This Owner's Manual has been systematically designed to make it easy for you to search for and obtain the information you require.
Documentation of vehicle handover Date of delivery/initial registration a) (VIN) Vehicle identification number ŠKODA Partner Vendor's stamp and signature I confirm that I have taken deli.
Preface You have opted for a ŠKODA – our sincere thanks for your confidence in us. You have received a vehicle with the latest technology and range of amenities. Please read this Owner's Manual carefully, because the operation in accordance with these instructions is a prerequisite for proper use of the vehicle.
Terms used The on-board literature contains the following terms relating to the service work for your vehicle. › “Specialist garage” - a workshop that carries out specialist service tasks for ŠKODA vehicles A specialist garage can be a ŠKODA partner, a ŠKODA service partner or an independent workshop.
Table of Contents Materials defect liability and ŠKODA warranty for new cars 5 Mobility warranty and ŠKODA extended warranty 6 Abbreviations Using the system Cockpit 9 Overview 8 Instruments and Ind.
Inspecting and replenishing 158 Fuel 158 Engine compartment 160 Engine oil 164 Coolant 166 Brake fluid 168 Vehicle battery 169 Wheels 173 Tyres and rims 173 Winter use 179 Do-it-yourself Emergency equ.
Materials defect liability and ŠKODA warranty for new cars Materials defect liability Your ŠKODA partner, as a vendor, is liable to you for defects in your new ŠKODA car, ŠKODA Genuine Parts or ŠKODA Genuine Accessories in accordance with stat- utory regulations and the purchase agreement.
Mobility warranty and ŠKODA extended warranty Mobility warranty The mobility warranty provides a sense of security when travelling in your vehicle. Should your car break down when you're on the .
Abbreviations Abbreviation Definition rpm Engine revolutions per minute ABS Anti-lock brake system AG Automatic gearbox TCS Traction control CO 2 in g/km discharged quantity of carbon dioxide in grams.
Fig. 1 Cockpit 8 Using the system.
Using the system Cockpit Overview Door handle 30 Electrical power windows 39 Electric exterior mirror adjustment 53 Air outlet vents 77 Car park ticket holder 71 Operating stalk: › Turn signal light.
Instruments and Indicator Lights Instrument cluster Introduction This chapter contains information on the following subjects: Overview 10 Engine revolutions counter 11 Speedometer 11 Coolant tempe.
Button for: › Reset trip meter » page 12 › Set hours/minutes › Enable/disable the mode selected by means of button 5 Fuel gauge 1) » page 11 Engine revolutions counter First read and observe the introductory information and safety warn- ings on page 10.
The fuel tank has a capacity of about 45 litres. The warning light lights up when the fuel level reaches the reserve range » page 25 . CAUTION Never drive until the fuel tank is completely empty! The irregular supply of fuel can cause misfiring. This can result in considerable damage to parts of the engine and the exhaust system.
Recommended gear Fig. 3 Recommended gear First read and observe the introductory information and safety warn- ings on page 10. The gear currently engaged is shown in the instrument cluster display A » Fig. 3 . In order to minimise the fuel consumption, a recommendation for shifting into an- other gear is indicated in the display.
Memory Fig. 4 Multifunction display First read and observe the introductory information and safety warn- ings on page 13. The multifunction display is equipped with two automatic memories. The selected memory is shown in the Display » Fig. 4 . The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis- play.
Multifunction display details First read and observe the introductory information and safety warn- ings on page 13. Outside temperature The current outside temperature is displayed 1) . The temperature is shown with the snowflake symbol (ice warning) if the out- door temperature is below +4 °C.
Current speed The current speed, identical to the display on the speedometer 3 » Fig. 2 on page 10, is displayed. Oil temperature 1) The current engine oil temperature is displayed. If the oil temperature is lower than 50 °C or if a fault in the system for checking the oil temperature is present, only - -.
Prompt in the segment display Fig. 6 Example of a message First read and observe the introductory information given on page 16. Oil change service If an oil change service is due, the icon and the number 1 is displayed at the position identified with the arrow for approximately 10 seconds » Fig.
MAXI DOT display Introduction This chapter contains information on the following subjects: Main menu 18 Settings 18 Door, boot lid and bonnet warning 19 Auto Check Control 19 The MAXI DOT display provides you with information about the current operating state of your vehicle .
Winter tyres Here, you can set the speed at which an audible signal should sound. This func- tion is, for example, used for winter tyres where the maximum permissible speed is lower than the maximum speed of the vehicle. The following is shown on the information display if this speed is exceeded: Winter tyres: maximum .
Note ■ Warning messages shown in the MAXI DOT display must be confirmed with but- ton B » Fig. 7 on page 18 to call up the main menu. ■ As long as the operational faults are not rectified, the symbols are always indi- cated again.
Stop the vehicle, switch off the engine, and check the level of the brake flu- id » page 168 . Further information » page 98 , Brakes . WARNING ■ If you have to stop for technical reasons, then park the vehicle at a safe dis- tance from the traffic, switch off the engine and activate the hazard warning light system » page 47 .
The warning light comes on for a few seconds when the ignition is switched on 1) . Stop the vehicle, switch off the engine, and check the engine oil level » page 165 . Even if the oil level is correct, do not drive any further if the warning light is flashing.
Power steering First read and observe the introductory information and safety warn- ings on page 20. The warning light comes on for a few seconds when the ignition is switched on. If the warning light after switching on the ignition or when driving lights up con- tinuously, a fault exists in the electrohydraulic power steering.
Antilock brake system (ABS) First read and observe the introductory information and safety warn- ings on page 20. If the warning light lights up, there is a fault in the ABS. The following message is shown in the MAXI DOT display. Fault: ABS The vehicle will only be braked by the normal brake system without the ABS.
ECU fault light (petrol engine) First read and observe the introductory information and safety warn- ings on page 20. If the warning light comes on or begins to flash while driving, a fault exists in the engine control unit. The engine control unit allows the vehicle to run in emer- gency mode.
Airbag system First read and observe the introductory information and safety warn- ings on page 20. If the warning light lights up, there is a fault in the airbag system.
If a turn signal light fails, the warning light flashes at twice its normal rate. Switching off the hazard warning light system is switched on will cause all of the turn signal lights as well as both warning lights to flash. Further information » page 45 , Turn signal and main beam lights .
Unlocking and locking Unlocking and locking Introduction This chapter contains information on the following subjects: Vehicle key 28 Replacing the battery in the remote control key 29 Child safety lock 29 Opening/closing the door 30 Locking/unlocking the vehicle without central locking 30 Emergency locking of the doors 31 Vehicle key Fig.
Replacing the battery in the remote control key Fig. 9 Remote control key: Remove cover/remove battery First read and observe the introductory information given on page 28. Each remote control key contains a battery located under the cover A » Fig. 9 .
Opening/closing the door Fig. 11 Door handle/door opening lever First read and observe the introductory information given on page 28. Opening from the outside › Unlock the vehicle and pull the door handle A » Fig. 11 on the door you wish to open. Opening from the inside › Pull on door handle B of the door and push the door away from you.
Note ■ Lock the opened rear doors and front passenger door by closing them and pressing the securing knob. ■ It is not possible to lock the opened driver's door using the securing knob. This prevents against inadvertently locking the key in the vehicle.
CAUTION If the safe securing system is activated » page 32 , the door opening lever and the central locking buttons do not operate. Note ■ In the event of an accident in which the airbags are deployed, the locked doors are automatically unlocked in order to enable rescuers to gain access to the vehi- cle.
Note This function is only enabled in certain countries. Unlocking the vehicle using the key Fig. 14 Turning the key for unlocking and locking the vehicle First read and observe the introductory information and safety warn- ings on page 31.
Unlocking all doors and the boot lid › Press on the button » Fig. 15 . The symbol in the button is no longer illumi- nated. The following applies if your vehicle has been locked using the central locking button. › It is not possible to open the doors or the boot lid from the outside (safety fea- ture, e.
Folding in the key bit › Press the button 4 » Fig. 16 and fold in the key bit. Unlocking The turn signal lights flash twice as confirmation that the vehicle has been un- locked.
Operation First read and observe the introductory information given on page 35. How is the alarm system activated? The anti-theft alarm system is activated when the vehicle is locked with the radio remote control or the key in the driver's door .
Tailgate Introduction This chapter contains information on the following subjects: Opening/closing 37 Automatic locking 37 Emergency unlocking 38 WARNING ■ Ensure that the lock is properly engaged after closing the boot lid. Other- wise, the tailgate might open suddenly while the vehicle is moving if it was locked – risk of an accident.
The period after which the tailgate locks automatically can be extended by a spe- cialist garage. Delayed locking If the tailgate was opened with the button on the remote control key, then it is possible to open the lid within a limited period of it being closed.
Note ■ After switching the ignition off, it is still possible to open or close the windows for approx. 10 minutes. The electrical power windows are only switched off com- pletely once the driver's door or front passenger door are opened.
If you attempt to close the window again within 10 seconds of the window being moved down for the second time, even though the obstacle was not yet been re- moved, the closing process is only stopped. During this time it is not possible to automatically close the window.
WARNING Close the sliding/tilting roof carefully – risk of injury. CAUTION During the winter it may be necessary to remove any ice and snow in the vicinity of the sliding/tilting roof before opening it to prevent any damage to the opening mechanism and seal.
Emergency operation Fig. 22 Point for positioning screwdriver/opening for positioning the key First read and observe the introductory information and safety warn- ings on page 40. The sliding/tilting roof can be closed or opened manually if the system is faulty.
Lights and visibility Lights Introduction This chapter contains information on the following subjects: Parking and low beam lights 43 Headlight beam adjustment 44 Daylight running lights (DAY LIGH.
Headlight beam adjustment Fig. 24 Dash panel: Lights and visibility First read and observe the introductory information and safety warn- ings on page 43. Turning the rotary switch » Fig. 24 from position to gradually adjusts the headlight beam thereby shortening the beam of light.
Turn signal and main beam lights Fig. 25 Stalk: turn signal and main beam operation First read and observe the introductory information and safety warn- ings on page 43. The parking light is controlled with the control stalk » page 47 . Control stalk positions » Fig.
Fog lights Fig. 26 Dash panel: Light switch First read and observe the introductory information and safety warn- ings on page 43. Switching on/off › First turn the light switch » Fig. 26 to position or . › Pull the light switch to position 1 .
Ignition switched off, light switched off (light switch in position 0 ), control dial for headlamp beam adjustment in the position, no gear engaged or selector lever in the N position (automatic gearbox), tourist light deactivated. › Switch on the ignition.
Switching on the side lights on both sides › Turn the light switch » Fig. 23 on page 43 to the position and lock the vehi- cle. Note ■ The parking light can only be activated if the ignition is switched off.
Interior lighting - version 2 Fig. 29 Interior lighting – version 2 First read and observe the introductory information given on page 48. Slide switch positions » Fig.
Rear window heating Fig. 31 Button for rear window heater First read and observe the introductory information given on page 49. › The rear window heater is switched on or off by pressing the button » Fig. 31 , the warning light in the switch comes on or goes out.
The windscreen wipers and the windscreen washer system only operate when the ignition is switched on. The rear window is wiped once automatically if the windscreen wipers are on when reverse gear is selected. Top up with windscreen wiper fluid » page 163 .
Headlight cleaning system First read and observe the introductory information and safety warn- ings on page 50. The headlights are sprayed briefly if the low beam or main beam are switched on and the windscreen wiper stalk is pulled to position 5 » Fig.
Rear window Introduction This chapter contains information on the following subjects: Manually dimmed rear-view mirror 53 Exterior mirrors 53 WARNING ■ Make sure that the mirror is not covered by ice, snow, condensation or other objects. ■ Convex (curved outward) or aspheric exterior mirrors increase the field of vi- sion.
Seats and storage Front seats Introduction This chapter contains information on the following subjects: Adjusting the front seats - Version 1 55 Adjusting the front seats - Variant 2 55 Front seat heating 55 The driver's seat should be adjusted in such a way that the pedals can be fully pressed to the floor with slightly bent legs.
Adjusting the front seats - Version 1 Fig. 37 Control elements on the seat First read and observe the introductory information and safety warn- ings on page 54. Adjusting a seat fore and aft › Pull lever 1 » Fig. 37 up and push the seat into the desired position.
WARNING If, as an occupant, you have a subdued pain and/or temperature sensitivity, e.g. through medication, paralysis or because of chronic illness (e.g. diabetes), we recommend not to use the seat heating. This can lead to burns on the back, the posterior and the legs which are difficult to heal.
CAUTION Ensure that the seat belts are not damaged when operating the seat backrests. Under no circumstances must the rear seat belts be jammed by the folded back seat backrests. Note On vehicles with an installed net partition housing, first fold back the left seat rest followed by the right one.
› Press the locking button in the direction of the arrow » Fig. 42 - and pull the head restraint out. › To re-insert the head restraint, push it far enough down into the seat backrest until the locking button clicks into place.
WARNING (Continued) ■ Please note that the handling properties of the vehicle may be affected when transporting heavy objects as the centre of gravity can be shifted – there is a risk of an accident. The speed and style of driving must be adjusted accordingly.
Note The upper front lashing eyes are located underneath the folding rear seat back- rest » Fig. 44 . Folding hooks Fig. 45 Boot: folding hooks First read and observe the introductory information and safety warn- ings on page 58. Folding hooks for attaching small items of luggage, such as bags etc.
Boot cover Fig. 47 Removing the boot cover First read and observe the introductory information and safety warn- ings on page 58. The boot cover can be removed if you wish to transport bulky goods. Removing cover › Unhook support straps 1 » Fig. 47 .
CAUTION In this position » Fig. 48 - the luggage compartment cover is designed for small objects up to a weight of 2.5 kg. Retractable luggage compartment cover (Fabia Estate) Fig. 49 Boot: foldable boot cover/removing foldable boot cover First read and observe the introductory information and safety warn- ings on page 58.
Removing and refitting the variable loading floor Fig. 51 Fold up variable loading floor/remove First read and observe the introductory information and safety warn- ings on page 62. Removing › Unlock the variable loading floor by turning the securing bolts A around 180° anticlockwise » Fig.
Net partition (Fabia Estate) Introduction This chapter contains information on the following subjects: Using the net partition behind the rear seats 64 Using the net partition behind the front sea.
Using the net partition behind the front seats Fig. 54 Extending/retracting the net partition First read and observe the introductory information and safety warn- ings on page 64. Extending › Open the rear right door. › Fold the seat cushions and rear seat rests forward.
WARNING When transporting bicycles, ensuring the safety of the passengers is para- mount. CAUTION Take care handling the bicycle - there is a risk of damaging the vehicle. Install cross member Fig. 56 Install cross member First read and observe the introductory information and safety warn- ings on page 65.
Put bicycle into the bicycle carrier Fig. 58 Put in the bicycle/example fastening the front wheel First read and observe the introductory information and safety warn- ings on page 65.
WARNING ■ The items being transported on the roof rack must be reliably attached – there is the risk of an accident. ■ Always secure the load with appropriate and undamaged lashing straps or tensioning straps. ■ Distribute the load evenly over the roof rack system.
Useful equipment Introduction This chapter contains information on the following subjects: Cupholders 69 Ashtray 69 Cigarette lighter 70 12-volt power outlet 70 Clothes hook 71 Car park ticket holder 71 WARNING ■ Do not place anything on the dash panel.
Removing › Pull the ashtray » Fig. 62 out and up. Fitting › Insert the ashtray vertically. WARNING Never put flammable objects in the ashtray – there is a risk of fire. CAUTION Do not hold the ashtray by the cover when removing it – there is a risk of it break- ing.
WARNING ■ Improper use of the 12-volt power socket and the electrical accessories can cause fires, burns and other serious injuries. ■ Never leave children unattended in the vehicle. The 12-volt power socket and any connected appliances can also be operated when the ignition is switched off or the ignition key is withdrawn.
Storage compartments Introduction This chapter contains information on the following subjects: Storage compartments on the front passenger side 72 Cooling the storage compartment on the front pass.
Cooling the storage compartment on the front passenger side Fig. 67 Storage compartment: Using cooling system First read and observe the introductory information and safety warn- ings on page 72. › Use the rotary switch » Fig. 67 to open and close the air supply.
Glasses storage box Fig. 70 Detail of the headliner: Glasses storage box First read and observe the introductory information and safety warn- ings on page 72. › Press on the bar in the cover of the glasses storage. The compartment folds down » Fig.
CAUTION The storage compartment is designed for storing small objects of up to 1 kg. in weight. Front armrest with storage compartment Fig. 73 Armrest: Storage compartment/open storage compartment First read and observe the introductory information and safety warn- ings on page 72.
› Grasp the top part of the cover and carefully remove it in the direction of the arrow » Fig. 75 . CAUTION The storage compartments are designed for storing small objects of up to 2.
Heating and air conditioning Heating, ventilation, cooling Introduction This chapter contains information on the following subjects: Air outlets 77 Using the air conditioning system economically 7.
Close air outlet vents 3 and 4 › Turn the vertical wheel (air vents 3 ) » Fig. 77 or the horizontal wheel (air outlet nozzles 4 ) to the 0 position. Change air flow of air outlet vents 3 and 4 › In order to change the strength of the air flow, swivel the horizontal lamellas with the aid of the moveable adjuster » Fig.
Operation Fig. 78 Heating: Control elements First read and observe the introductory information given on page 78. Functions of the individual controls » Fig.
We recommend that you leave the air outlet vents 3 » Fig. 77 on page 77 in the open position in all operating modes. Note If the air distribution is directed only towards the windows, the total amount of air is used to defrost the windows and thus no air will be fed to the footwell.
Operation Fig. 79 The air conditioning system: Control elements First read and observe the introductory information and safety warn- ings on page 80. Functions of the individual controls » Fig.
Setting the air conditioning system First read and observe the introductory information and safety warnings on page 80. Recommended basic settings of the air conditioning controls. Setting Control dial position » Fig. 79 on page 81 Button » Fig. 79 on page 81 Air outlet vents 4 » Fig.
WARNING Never leave recirculated air mode on over a longer period, as “stale air” can cause fatigue in the driver and the passengers, reduce attention levels and al- so cause the windows to mist up. The risk of having an accident increases. Switch off recirculated air mode as soon as the windows start to mist up.
Air flow to the windows Air flow to the upper body Air flow in the footwell Recirculating air operation on/off » page 84 Switch cooling system on/off Note Do not stick anything on or cover the interior temperature sensor 11 » Fig. 80 ; it could have an unfavourable effect on the Climatronic system.
Note If recirculated air mode is switched on for around 15 minutes, the symbol will begin to flash in the display as a sign that the recirculated air mode is switched on long-term. If the recirculated air mode is not switched off, the symbol flashes for around 5 minutes.
Communication and multimedia Universal telephone preinstallation GSM II Introduction This chapter contains information on the following subjects: Mobile phones and two-way radio systems 86 Introdu.
The universal telephone preinstallation GSM II comprises the following functions. › Phone Phonebook » page 87 . › Convenience operation of the telephone via the multifunction steering wheel » page 87 . › Managing telephone calls via the adapter » page 89 .
Button/ wheel » Fig. 81 Action Operation 1 Press briefly Accept call, terminate call, entry in the main menu of the telephone, list of selected numbers 1 Press button for a long period of time Reject.
Managing telephone calls with the help of the adapter Fig. 83 Principle sketch: Adapter with one button/adapter with two buttons First read and observe the introductory information given on page 86. Function overview of the » Fig. 83 (PTT - “push to talk”) button on the adapter: › Switch on/off voice control; › Accept/end a call.
Disconnecting the connection › By withdrawing the ignition key. › By disconnecting the hands-free system in the mobile phone. › By disconnecting the user in the Bluetooth - Users menu item in the MAXI DOT display. Solving connection problems Check the operating status of the mobile phone if the system reports No paired phone found .
■ Media Player ■ Active device ■ Paired devices ■ Search ■ Phone name - option to change the name of the phone (default SKODA_BT) Settings The following menu items can be selected from the Settings menu item. ■ Phone book ■ Update 1) ■ List ■ Surname ■ First name ■ Ring tone Back Return in the Start menu of the telephone.
Note ■ The dialogue of an incoming call is immediately interrupted. ■ The voice control is only possible in vehicles fitted with a multifunction steering wheel with telephone control or a phone mount and adapter. Voice commands First read and observe the introductory information given on page 91.
Operating the radio and navigation system on the multifunction steering wheel Fig. 84 Multifunction steering wheel: Control buttons and wheel First read and observe the introductory information given on page 92. The multifunction steering wheel has buttons for operating the basic functions of factory-fitted radio and navigation system » Fig.
Note ■ The functions of button 1 are different for vehicles fitted with a universal tele- phone preinstallation GSM II » page 87 . ■ The loudspeakers in the vehicle are adjusted to the power output of the radio and navigation system of 4x20°W. AUX and MDI inputs First read and observe the introductory information given on page 92.
Driving Starting-off and Driving Steering Introduction This chapter contains information on the following subjects: Adjusting the steering wheel position 95 Power steering 95 WARNING ■ When driving, hold the steering wheel with both hands firmly on the outer edge in the 9 o'clock and 3 o'clock position.
It is still fully possible to steer the vehicle if the power steering fails or if the en- gine is not running (e.g. when towing). However, greater physical effort is re- quired to turn the steering wheel. CAUTION You will place great stresses on the power steering system if the steering is turned to full lock when the vehicle is stationary.
For the sake of the environment Do not warm up the engine while the vehicle is stationary. If possible, start your journey as soon as the engine has started. Through this the engine reaches its operating temperature more rapidly and the pollutant emissions are lower.
› Depress and hold the clutch pedal (vehicles with a manual gearbox) or brake pedal (vehicles with an automatic gearbox) until the engine starts. › Turn the key to position 3 to the stop and release immediately the engine has started – do not depress the accelerator.
Under these severe conditions , the thickness of the brake pads must also be checked by a specialist garage between services. Wet roads or road salt The performance of the brakes can be delayed as the brake discs and brake pads may be moist or have a coating of ice or layer of salt on them in winter.
Manual gear changing Fig. 88 Shift pattern of the 5-speed manual gearbox First read and observe the introductory information given on page 99. Always depress the clutch pedal all the way down. This prevents uneven wear on the clutch. The gearshift indicator must be observed when changing gear » page 13 .
CAUTION ■ If the selector lever is shifted to N while the vehicle is being driven you must lift off the accelerator pedal and you will need to wait until the engine has reached its idling speed before shifting the selector lever to a forward driving mode again.
Manual gear shifting (Tiptronic) Fig. 90 Selector lever/multi-function steering wheel First read and observe the introductory information and safety warn- ings on page 100. Tiptronic mode makes it possible to manually shift gears with the selector lever or multifunction steering wheel.
The gearbox shifts down one or more gears depending on the vehicle speed and engine speed, and the vehicle accelerates. The gearbox does not shift up into the highest gear until the engine has reached its maximum revolutions for this gear range.
New engine First read and observe the introductory information given on page 103. The engine has to be run in during the first 1 500 kilometres. Up to 1 000 kilometres › Do not drive faster than 3/4 of the maximum speed of the gear in use, i.e. 3/4 of the maximum permissible engine speed.
The technical requirements for low fuel usage and economic efficiency of the ve- hicle have already been built into the vehicle at the works. ŠKODA places a partic- ular emphasis on minimising negative effects on the environment.
Avoiding full throttle Fig. 93 Principle sketch: Fuel consump- tion in litres/100 km. and speed in km/h. First read and observe the introductory information and safety warn- ings on page 104.
Always ensure the tyre inflation pressure is correct. If the pressure is too low, the tyres will have to overcome a higher rolling resistance. This will not only increase fuel consumption but also tyre wear and the driving behaviour will worsen. Always check the tyre inflation pressure when the tyres are cold .
› Minimum fuel leakage during accidents. › Reduced noise. Choice of materials › Extensive use of recyclable material. › Air conditioning filled with CFC-free refrigerant. › No cadmium. › No asbestos. › Reduction in the “vaporisation” of plastics.
Driving through water on streets Fig. 95 Driving through water First read and observe the introductory information given on page 108. The following instructions must be observed if vehicle damage is to be avoided when driving through water (e.g. flooded roads).
Headlights First read and observe the introductory information given on page 109. The low beam of your headlights is set asymmetrically. It illuminates the side of the road on which the vehicle is being driven to a greater extent.
Assist systems Brake assist systems Introduction This chapter contains information on the following subjects: Stabilisation control (ESC) 111 Antilock Braking System (ABS) 112 Traction Control Sys.
Hill hold control (HHC) HHC allows you to move your foot from the brake pedal to the accelerator pedal without having to use the handbrake when pulling away on a gradient. The system holds the brake pressure produced by the activation of the brake pedal for approx.
XDL function (Fabia RS and Fabia Estate RS only) XDL is an extension to the electronic differential lock. XDL does not respond to traction, but to the relief of the inner front wheel during fast cornering. The active brake intervention on the brake of the inner wheel prevents it from spinning.
Activation/deactivation First read and observe the introductory information and safety warn- ings on page 113. The system is activated automatically by engaging reverse gear . This is confirmed by a brief audible signal. The system is deactivated by disengaging reverse gear.
Storing a speed Fig. 98 Stalk: Use cruise control First read and observe the introductory information and safety warn- ings on page 114. Storing a speed › Press switch A » Fig. 98 to the ON position. › After the desired speed has been reached, press the rocker button B into the SET position.
START-STOP Introduction This chapter contains information on the following subjects: Starting/shutting down the engine 116 Operating conditions for the system 116 Manually activating/deactivating .
› The engine has not yet reached the minimum temperature for the START STOP mode. › The temperature inside the vehicle has not reached the desired temperature set in the air-conditioning system/heating. › The external temperature is very low/high.
Towing a trailer Towing device Introduction This chapter contains information on the following subjects: Description 118 Adjusting the ready position 119 Fitting the ball head 119 Check proper fit.
Lock cap Release pin Key Locking ball Note ■ The tool for removing the wheel trim is part of the vehicle tool kit » page 181 . ■ If you lose the key, please get in touch with a specialist garage.
WARNING ■ Carefully remove the cap for the mounting recess - there is a risk of hand injury. ■ Keep your hands outside the lever's range of motion when attaching the ball head – there is a risk of finger injury. ■ Never attempt to pull the operating lever upwards forcibly to turn the key.
The ball head is released in this position and falls freely into the hand. If it does not fall freely into the hand, use your other hand to push it upwards. At the same time, the ball head latches into the ready position and is thus ready to be re-inserted into the mounting recess » .
The distribution of the weight is very poor if your vehicle is unladen and the trail- er is laden. Maintain a particularly low speed if you cannot avoid driving with this combination. Tyre pressure Correct the tyre inflation pressure on your vehicle for a “full load” » page 174 , Tyre service life .
Note ■ After coupling the trailer and connecting up the power socket, check the rear lights on the trailer to ensure they work. ■ If there is an error in the trailer lighting system, check the fuses in the fuse box in the dashboard » page 193 .
Safety Passive Safety General information Introduction This chapter contains information on the following subjects: Safety equipment 124 Before every journey 124 What influences driving safety? 125 In this section you will find important information, tips and notes on the subject of passive safety in your vehicle.
What influences driving safety? First read and observe the introductory information and safety warn- ings on page 124. The driver is fully responsible for himself and his occupants. If your driving safety is effected, you place yourself and the oncoming traffic at risk.
Correct seated position of the driver Fig. 106 The correct distance between the driver and the steering wheel/ correctly adjusted head restraint First read and observe the introductory information and safety warn- ings on page 125. For your own safety and to reduce the risk of injury in the event of an accident, we recommend the following setting.
Incorrect seated positions considerably reduce the protective functions of the seat belts and therefore increase the risk of injury due to an incorrect routing of the seat belt. The driver is fully responsible for himself and passengers, especially children.
Seat belts Wearing seat belts Introduction Fig. 107 Driver wearing seat belt This chapter contains information on the following subjects: The physical principle of a frontal collision 129 Fastenin.
WARNING Observe the following instructions for the proper use of the seat belts. ■ Never use a seatbelt to secure two persons (not even children). Nor may the seat belt be placed over a child who is sitting on the lap of another passenger. ■ The lock tongue should only be inserted into the lock which is the correct one for your seat.
It is also important that rear seat occupants fasten their seat belts as they will otherwise be thrown through the vehicle in an uncontrolled manner in the event of an accident. A rear seat passenger who has not fastened the seat belt is a danger not only to himself but also for those seated in the front » Fig.
Seat belt height adjuster on the front seats Fig. 111 Front seat: Seat belt height ad- juster First read and observe the introductory information and safety warn- ings on page 128. The seat belt height adjuster makes it possible to adjust the routing of the front seat belts in the area of the shoulder to the body size.
Note ■ Smoke is generated when the belt tensioners are deployed. This is not an indi- cation of a fire in the vehicle. ■ When disposing of the vehicle or parts of the belt tensioner system, it is impor- tant to comply with national legal requirements.
Airbag system Description of the airbag system Introduction This chapter contains information on the following subjects: System description 133 Airbag deployment 133 WARNING ■ An airbag can only offer you optimal protection in combination with a fas- tened seat belt.
In certain accident situations, the several airbags may be deployed simultaneous- ly. The airbags are not deployed in the case of minor frontal and side collisions, rear- end collisions, tilting of the vehicle and vehicle rollover.
Front airbags Fig. 112 Driver airbag in the steering wheel/front passenger airbag in the dash panel Fig. 113 Safe distance to steering wheel/inflated airbags First read and observe the introductory information given on page 134.
Side airbags Fig. 114 Location of the side airbag in the driver's seat/gas-filled side airbag First read and observe the introductory information given on page 134. In the event of severe side collisions, the side airbag system provides additional protection for the upper body (chest, stomach and pelvis) of passengers in the ve- hicle.
Head airbags Fig. 115 Location of the head airbag/gas-filled head airbag First read and observe the introductory information given on page 134. In the event of a severe side collision, the head airbag system offers additional protection for the head and neck area of passengers.
Deactivating airbags First read and observe the introductory information given on page 137. Deactivating an airbag should be considered only in the following cases, for example.
WARNING ■ The driver is responsible for whether the airbag is switched on or switched off. ■ Only switch off the airbag when the ignition is switched off! Otherwise a fault can occur in the system for deactivating the airbag.
Transporting children safely Child seat Introduction This chapter contains information on the following subjects: Use of a child seat on the front passenger seat 141 Child safety and side airbag 1.
Use of a child seat on the front passenger seat Never use a rearward-facing child restraint system on a seat which is protected by an active airbag installed in front of it. This could cause serious injury to the child, even death. Fig. 117 Sticker on the B column on the front passenger side.
Child safety and side airbag Fig. 118 Incorrect seated position of a child who is not properly secured – at risk from the side airbag/Child properly protected by safety seat First read and observe the introductory information and safety warn- ings on page 140.
Fastening systems Introduction This chapter contains information on the following subjects: ISOFIX system attachment points 143 Use of child seats with the ISOFIX system 143 TOP TETHER system attachment points 144 ISOFIX system attachment points Fig.
Group Size class of the child seat a) Front passenger seat b) Outer rear seats Rear seat middle 1 9-18 kg D X IL-SU IUF X C B B1 A a) The size category is shown on the label attached to the child seat.
General Maintenance Car care Service intervals Introduction This chapter contains information on the following subjects: Overview of service intervals 145 Fixed service intervals QI1 - QI4 146 Var.
A vehicle must only be filled and topped up with the specified engine oil if it is to be operated with a variable service interval. If this engine oil is not available, the oil change is subject to a fixed service inter- val. In this case, the vehicle must be changed to the fixed service interval.
ŠKODA Service Partners are equipped with modern, specially developed tools and equipment. Here, trained specialists have a comprehensive range of ŠKODA Origi- nal Parts and ŠKODA Original Accessories at their disposal. All ŠKODA Service Partners operate in accordance with the latest guidelines and instructions from the manufacturer.
Legally required inspections First read and observe the introductory information and safety warn- ings on page 147. Many countries have legislation which requires that the reliability and roadworthi- ness and/or exhaust gas composition of a vehicle must be tested at specific inter- vals.
We recommend that you use ŠKODA Genuine Accessories in your vehicle. ŠKODA AUTO a.s. offers a warranty on the reliability, safety and suitability for your partic- ular vehicle of these accessories.
WARNING Observe the following instructions for the airbag system. ■ It is prohibited to tamper with individual parts of the airbag system as this might result in the airbag being deployed. ■ Never install any airbag parts into the vehicle that have been removed from old cars or have been recycled.
CAUTION ■ When washing the car by hand, protect your hands and arms from sharp-edged metal parts (e.g. when cleaning the undertray, exhaust system, the inside of the wheel housings or the wheel trims etc.) - there is a risk of cutting yourself. ■ Only apply slight pressure when cleaning the vehicle's paintwork.
We recommend using care products from ŠKODA Original Accessories that are available from ŠKODA Partners. The instructions for use on the package must be observed. WARNING ■ Care products may be harmful to your health if not used according to the in- structions.
Rubber seals First read and observe the introductory information and safety warn- ings on page 151. All door seals and window guides are factory-treated with a colourless matt var- nish layer against a freezing to painted body parts and against road noise.
■ When removing snow or ice from windows and mirror lenses ensure that the paintwork of the vehicle is not to damage. ■ Do not clean the inside of the windows with sharp-edged objects or corrosive and acidic cleaning agents – there is a risk of damaging the heating elements or window aerial.
Damage to the protective coating cannot be excluded when the vehicle is driven. We recommend that you have the protective coating under the body and on the chassis inspected - preferably before the beginning and at the end of the cold season.
We recommend that you remove dust at regular short intervals with a cloth or vacuum cleaner. Clean soiled leather surfaces with a cotton or woollen cloth lightly moistened with water and then dry with a clean dry cloth » .
Seat covers First read and observe the introductory information and safety warn- ings on page 155. Electrically heated seats Do not wet clean the seat covers as this can damage the seat heating system. Use a specific cleaning agent such as dry foam or similar to clean the covers.
Inspecting and replenishing Fuel Introduction This chapter contains information on the following subjects: Refuelling 158 Unleaded petrol 159 Diesel fuel 160 The correct grades of fuel for your vehicle are stated on a sticker affixed to the inside of the fuel filler flap » Fig.
Note The fuel tank has a capacity of about 45 litres , containing a reserve of approx. 7 litres . Unleaded petrol First read and observe the introductory information and safety warn- ings on page 158. Your vehicle can only be operated with unleaded petrol complying with EN 228 1) .
Note ■ Unleaded petrol that has a higher octane number than that required by the en- gine can be used without limitations. ■ The use of petrol with an octane rating higher than 95 RON in does not result in either a noticeable increase in power nor lower fuel consumption in vehicles for which unleaded petrol 95/91, 92 or 93 RON is specified.
WARNING Please read the following advice before beginning work in the engine com- partment. ■ Turn off the engine and withdraw the ignition key. ■ Firmly apply the handbrake.
CAUTION Always top up using the correct specification of fluids. This may result in major operating problems and also vehicle damage! For the sake of the environment In view of the requirements for th.
Engine compartment overview Fig. 125 Principle sketch: Engine compartment First read and observe the introductory information and safety warn- ings on page 160.
The washing water should always be mixed with antifreeze in winter even if the vehicle has heated windscreen washer nozzles. Under exceptional circumstances, methylated spirits can also be used if no screen cleaner with antifreeze is available. The concentration of methylated spirits must not be more than 15 %.
Diesel engines a) Specification Capacity 1.2 litres/55 kW TDI CR DPF VW 507 00 4.3 1.6 litres/55 kW TDI CR DPF VW 507 00 4.3 1.6 litres/66 kW TDI CR DPF VW 507 00 4.3 1.6 litres/77 kW TDI CR DPF VW 507 00 4.3 a) Engine oil VW 505 01 can optionally be used in diesel engines without a DPF .
The oil level must be checked at regular intervals. We recommend it be checked after each time you refuel or prior to making a long journey. We recommend maintaining the oil level within the range A ,.
WARNING ■ The engine compartment of your car is a hazardous area. While working in the engine compartment, be sure to observe the following warn- ings » page 160 . ■ Do not continue your journey if for some reason it is not possible to top up the coolant under the current conditions.
If the coolant level in the coolant expansion tank is too low, this is indicated by the warning light lighting up in the instrument cluster » page 22 , Coolant . We still recommend inspecting the coolant level directly at the reservoir from time to time.
A slight drop in the fluid level results in operation due to normal wear and tear and the automatic adjustment of the brake pads. There may be an indication of a leak in the brake system, however, if the fluid lev- el drops significantly within a short time or if it drops below the “MIN” marking.
WARNING ■ It is prohibited to work with a naked flame and light. ■ Smoking or any activities which produce sparks are prohibited. ■ Never use a damaged vehicle battery – there is a risk of explosion. ■ Never charge a frozen or thawed vehicle battery – there is a risk of explo- sion and caustic burns.
Checking the electrolyte level Fig. 131 Vehicle battery: Electrolyte level indicator First read and observe the introductory information and safety warn- ings on page 169. We recommend you have the electrolyte level checked by a specialist garage from time to time, especially in the following cases.
WARNING “Quick-charging” the vehicle battery is dangerous and requires a special charger and specialist knowledge. CAUTION On vehicles with the START/STOP system, the pole terminal of the charger .
Wheels Tyres and rims Introduction This chapter contains information on the following subjects: Tyre service life 174 New tyres 175 Unidirectional tyres 176 Tyre pressure monitor 176 Spare wheel 177 Full wheel trim 178 Wheel bolts 178 Hubcaps 178 Wheel bolts 179 WARNING ■ National legal requirements must be observed for the use of tyres.
WARNING Observe the following information regarding the wheel bolts. ■ The wheel bolts must be clean and must turn easily. Never apply grease or oil.
Always check the inflation pressure when the tyres are cold. Do not reduce the higher pressure of warm tyres. Adjust the tyre pressure accordingly if you are carrying a greater load. Driving style Fast cornering, sharp acceleration and braking increase the wear of your tyres.
530 kg 545 kg 615 kg 630 kg 650 kg Speed symbol This indicates the maximum permissible speed for a vehicle fitted with tyres in the category concerned. 170 km/h 180 km/h 190 km/h 200 km/h 210 km/h 240 km/h 270 km/h CAUTION The information about the load index and the speed symbol for your vehicle are listed in your vehicle documents.
WARNING ■ When the warning light illuminates, immediately reduce the speed and avoid sudden steering and brake manoeuvres. Stop the vehicle as soon as possible and inspect the tyres and their inflation pressure. ■ Under certain circumstances (e.
Full wheel trim First read and observe the introductory information and safety warn- ings on page 173. Pulling off › Hook the clamp found in the vehicle tool kit into the reinforced edge of the wheel trim. › Push the wheel wrench through the clamp, support on the tyre and pull off the wheel trim.
Wheel bolts First read and observe the introductory information and safety warn- ings on page 173. Wheels and wheel bolts are matched to each other in terms of design. Whenever you change the wheels fitted, e.g. light alloy wheels or wheels with winter tyres, you must also use the matching wheel bolts of the correct length and shape of bolt head.
Do-it-yourself Emergency equipment, and self-help Emergency equipment Introduction This chapter contains information on the following subjects: First aid kit and warning triangle 180 Fire extinguisher 180 Vehicle tool kit 181 First aid kit and warning triangle Fig.
Note ■ The fire extinguisher must comply with national legal requirements. ■ Pay attention to the expiration date of the fire extinguisher. Proper functioning of the fire extinguisher is not assured once it has passed its expiry date. ■ The fire extinguisher is part of the scope of delivery in certain countries only.
WARNING Observe the following instructions for raising the vehicle. ■ If the wheel has to be changed on a slope, first of all block the opposite wheel with a stone or similar object to prevent the vehicle from unexpectedly rolling away. ■ Secure the base plate of the lifting jack with suitable means to prevent pos- sible moving.
Subsequent steps First read and observe the introductory information and safety warn- ings on page 181. The following steps must also be performed after changing the wheel. › Stow and attach the replaced wheel in the spare wheel well using a special screw » page 177 , Spare wheel .
Raising the vehicle Fig. 142 Jacking points for positioning lifting jack Fig. 143 Attach lifting jack First read and observe the introductory information and safety warn- ings on page 181. Position the car jack below the jacking point closest to the flat tyre » Fig.
Note ■ Make a note of the code number hammered into the rear side of the adapter or the rear side of the anti-theft wheel bolt. This number can be used to purchase a ŠKODA Original Parts replacement adapter, if necessary. ■ We recommend that you always carry the adapter for the wheel bolts with you in the vehicle.
Breakdown kit Fig. 145 Components of the breakdown kit First read and observe the introductory information and safety warn- ings on page 185. The kit is located in a box under the floor covering in the luggage compartment. Components of the breakdown kit Valve remover Sticker with “max.
› Remove the empty tyre inflator bottle from the valve. › Screw the valve core back into the tyre valve using the valve remover 1 . Inflating › Screw the air compressor tyre inflation hose 5 » Fig. 145 on page 186 firmly on- to the tyre valve. › Check that the air release valve 7 is closed.
WARNING (Continued) ■ The non-insulated parts of the terminal clamps must never touch each other – there is a risk of short circuit. ■ The jump-start cable connected to the positive terminal of the battery must not come into contact with electrically conducting parts of the vehicle – there is a risk of short circuit.
Jump-starting in vehicles with the START-STOP system Fig. 147 Engine compartment: Earth First read and observe the introductory information and safety warn- ings on page 187. The jump-start cable must only be connected to the engine earthing point on ve- hicles with the START-STOP system » Fig.
Note ■ We recommend using a tow rope from ŠKODA Original Accessories available from a ŠKODA Partner. ■ Towing another vehicle requires a certain amount of practice. Both drivers should be familiar with the particular points about towing a vehicle.
Note The detachable ball rod must always be in the vehicle so that it can be used for towing, if necessary. 191 Emergency equipment, and self-help.
Fuses and light bulbs Fuses Introduction This chapter contains information on the following subjects: Fuses in the dash panel 193 Fuses in the engine compartment 194 Individual electrical circuits are protected by fuses.
Fuses in the dash panel Fig. 150 Underside of the dash panel: Distribution board cover. Fig. 151 Schematic representation of the fuse box for vehicles with left- hand steering/right-hand steering First read and observe the introductory information and safety warn- ings on page 192.
No. Power consumer 32 High pressure fuel pump, pressure valve 33 Engine control unit 34 Engine control unit, vacuum pump 35 Daytime running lights/radio for vehicles with START-STOP 36 Main beam 37 Re.
No. Power consumer 5 Interior 6 Glow plugs, radiator fan 7 Electrohydraulic power steering 8 ABS or TCS or ESC 9 Radiator fan 10 Automatic gearbox 11 ABS or TCS or ESC 12 Central control unit 13 Electrical auxiliary heating system Note Fuses 1-7 are replaced by a specialist garage.
Headlights Fig. 154 Bulb arrangement: Halogen headlights/halogen projector head- lights First read and observe the introductory information and safety warn- ings on page 195.
Changing the low beam and high beam bulb (halogen projector headlights) Fig. 156 Removing bulbs for low beam/ low and main beam First read and observe the introductory information and safety warn- ings on page 195. › Remove the rubber cover 1 » Fig.
Foglights and daytime running lights Fig. 158 Front bumper: Protective grille/removing the fog light First read and observe the introductory information and safety warn- ings on page 195.
Changing light bulbs and installing fog lights › Press the locking tab 1 » Fig. 160 on the connector A and remove the connec- tor from the bulb holder B .
› Grip the tail lamp assembly and carefully remove it by pulling it back at an angle with loosening movements. Do not pull the grommet with the cables out of the bodywork. › To refit the rear light assembly, first insert screw A into the opening in the bodywork » Fig.
Technical data Technical data Vehicle data Introduction This chapter contains information on the following subjects: Vehicle identification data 201 Dimensions 202 Vehicle-specific details accordi.
The operating weight also contains the weight of the driver (75 kg), the weight of the operating fluids, the tool kit, and a fuel tank filled to 90 % capacity. It is possible to calculate the approximate loading capacity from the difference between the permissible total weight and the operating weight » .
FABIA FABIA GreenLine FABIA SCOUT FABIA RS ESTATE ESTATE GreenLine ESTATE SCOUT ESTATE RS Wheelbase 2465 2465 2465 2464 2465 2465 2465 2464 Track gauge front/rear 1433/1426 (1417/1410) c) (1429/1422) .
Vehicle-specific details according to engine type First read and observe the introductory information given on page 201. The values specified have been determined in accordance with rules and under conditions set out by legal or technical requirements for determining operational and technical data for motor vehicles.
1.2 ltr./63 kW TSI engine Output (kW at rpm) Maximum torque (Nm at rpm) Number of cylinders/displacement (cm 3 ) 63/4800 160/1500-3500 4/1197 Performance FABIA ESTATE Top speed (km/h) 177 178 Acceleration 0-100 km/h (s) 11.
1.4 ltr./63 kW engine Output (kW at rpm) Maximum torque (Nm at rpm) Number of cylinders/displacement (cm 3 ) 63/5000 132/3800 4/1390 Performance FABIA ESTATE Top speed (km/h) 175 176 Acceleration 0-100 km/h (s) 12.
1.4 ltr./132 kW TSI engine Output (kW at rpm) Maximum torque (Nm at rpm) Number of cylinders/displacement (cm 3 ) 132/6200 250/2000-4500 4/1390 Performance FABIA RS ESTATE RS Top speed (km/h) 224 226 Acceleration 0-100 km/h (s) 7.
1.6 ltr./55 kW TDI CR engine Output (kW at rpm) Maximum torque (Nm at rpm) Number of cylinders/displacement (cm 3 ) 55/4000 195/1500-2000 4/1598 Performance FABIA ESTATE Top speed (km/h) 166 167 Acceleration 0-100 km/h (s) 14.
1.6 ltr./77 kW TDI CR engine Output (kW at rpm) Maximum torque (Nm at rpm) Number of cylinders/displacement (cm 3 ) 77/4400 250/1500-2500 4/1598 Performance FABIA ESTATE Top speed (km/h) 188 190 Acceleration 0-100 km/h (s) 10.
Index A Abroad Driving abroad 109 Unleaded petrol 109 ABS 112 warning light 24 Accessories 147 Adjusting Exterior mirrors 53 Head restraints 57 Steering wheel 95 Adjusting the seats 125 Adjustment Hea.
Car computer see Multifunction display 13 Caring for paintwork 152 Car park ticket holder 71 Carrier 67 Central locking button 33 Central locking system 31 lock 33 unlock 33 Changing Brake fluid 169 B.
Display Service interval 16 Distance driven 12 Door Child safety lock 29 Closing 30 Door open warning light 21 Opening 30 Doors Emergency locking 31 Driving Abroad 109 Driving through water on streets.
H Handbrake 99 Hazard warning light system 47 Head airbag 137 Headlight cleaning system Headlight cleaning system 52 Headlights 196 Driving abroad 110 Headlight cleaning system 52 Head restraint 57 St.
N N1 59 Net partition 64 Behind the front seats 65 Behind the rear seats 64 Removing and refitting the housing 65 O Oil see Engine oil 165 Oil pressure Display messages 21 Onboard computer see Multifu.
Heating 55 Removing the seats 57 Seats and storage 54 see Automatic gearbox Manual gear shifting on the multifunction steer- ing wheel 102 Selector lever see Using the selector lever 101 Service 148 S.
U Underbody protection 154 Underbody waxing 154 Unleaded petrol 109 unlock Central locking system 33 Unlocking Remote control 34 without central locking 30 Unlocking and locking 28 USB 94 Useful equip.
Winter operation Snow chains 179 Winter tyres See Wheels 179 Winter use 179 Winter tyres 179 X XDS 112 217 Index.
ŠKODA AUTO a.s. pursues a policy of constant product and model development. We trust that you will understand that changes to models in terms of shape, equipment and engineering, may be introduced at any time.
.
www.skoda-auto.com You also can do something for the environment! The fuel consumption of your ŠKODA and the related pollutant emissions are determined crucially on how you drive. The noise and the wear of the vehicle depend on the way how you deal with your vehicle.
Een belangrijk punt na aankoop van elk apparaat Skoda Fabia (2014) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Skoda Fabia (2014) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Skoda Fabia (2014) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Skoda Fabia (2014) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Skoda Fabia (2014) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Skoda Fabia (2014) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Skoda Fabia (2014) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Skoda Fabia (2014) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
