Gebruiksaanwijzing /service van het product SMC8506T van de fabrikant SMC Networks
Ga naar pagina of 50
SMC8506T 10/100/1000 Gigabit Copper Switch • 6 10/100/1000 RJ-45 Ports with 1 expansion bay • 2 port 1000Base-TX or 2 port 1000SX modules • Auto MDI/MDIX on all ports • Half- and full-duplex f.
EZ Switch 1000 User Guide From SMC’s EZ li ne of low-cos t workgroup LA N solutions 6 Hughes Irvine, CA 92618 P hon e : (9 4 9 ) 707 - 2 4 0 0.
Copyr igh t Information furnishe d by SMC Networks, Inc. ( SMC) is believed t o be accurate and reliable. How ever, no responsi bility is assumed by S MC for its use, nor for any infringements of patents or othe r rights of third par ties which m ay result from its use.
Limited Warr anty Limited Warrant y Statem ent: SMC Netwo rks, Inc. (“SMC ”) warr ants its pro ducts to b e free from defects in workmanship an d materials , under norm al use and se rvice, for the applicable w arranty term.
L IMITED W ARRANTY IMPROPE R INSTALLA TION O R TESTING , UNAUT HORIZED ATTEMPTS TO REPAI R, OR ANY OTHER CA USE BEYON D THE RANGE OF T HE INTENDED USE, OR BY A CCIDENT, FIRE, LI GHTNING, O R OTHE R HAZARD.
COMPLIANCES FCC Class A This equipment has bee n tested and found to comply with the limit s for a Class A digital device pursuant to Part 15 of FCC Rule s. These limits are designed to provide reasonable protec tion against harmful interference when t he equipment is operate d in commercial environme nt.
COMPLIANCES Industry Canada - Class A This digital apparatus does not exceed the Class A limits for radio noise e missions from digital apparatus as set out in the in terference- causing equipment standard entitled “Digital Apparatus”, ICES-003 of Industry Canada.
T ABLE OF C ONTENTS Chapter 1 Introdu ction - Features and Benefits - Hardware Des cription - Optional Modules Chapter 2 Equipment Checklist Selecting a site Positioning the switch Sample Applications.
Chapter 1 Introduction - EZ Switch 1000 The SMC family of EZ Switch 1000 Gigabit Ethernet Switches (SMC8504T & SMC8506T) is the perfect solution for bottlenecks at the core of a network. Bottlene cks are the inevi table result of data- intensive applications and the prolif er ation of new users.
Features and Ben efits The SMC EZ Switch™ 1000 gigabit switch is based on adv anced chip designs to maximize throughput and increase the efficiency of your network. It features all st andards-based technology , built at leading edge manufacturing facilities for reliabi lity; hence, SMC backs your new product with a Limited Lifeti me Warranty.
• A reset switch is located on the front pan el for easy access • Internal power supply • Advanced functions include: 1. RS-232 and Console port for changing port configurations 2. Port-base VLAN (not support port-base VLAN overla p) 3. Tagged-base QOS (not support port-base QOS) 4.
Hardware Description This section describes the hardware features of these Giga Switches. For easier management and control of the switch, familiarize yourself with its display indicators, and ports. Front panel illustra tions in this chapter display the unit LED indicators.
SMC8506T via a connection to a console ter minal or PC using a terminal emulat ion program Also shown in the diagram below are two fans for cooling the unit. 100-2 40V AC 50-6 0Hz CONSOLE RS232 19200,N,8,1 Rear panel of SMC8506 T Optio nal Mo dules There are two opt ional modules; a 2-por t 1000BAS E-T and a 2-port 100BA SE-FX.
Chapter 2 Installing the SMC EZ Switch 1000 Equipment Checkl ist After unpacking the EZ Switch 1000 , check the contents of the box to be sure you have received the follo wing components: Check the contents of your pack age for following parts: z 6 port 10/100/1000 Copper Gigabit S witch z Power cord z 19” rack mount brackets .
lighting fixtures and other sources of electrical interference such as radios and transmitters. Make sure that a properly grounded power outlet is within 2.44 meters (8 feet) of the switch and is powered from an independent circuit breaker. As with any equip ment, using a filter or surge suppressor is recommended.
RS-232 serial cable You must us e the enclosed RS-232 serial cable that came with your switch. Attach the 9-pin female connector to the male connector on the switch.
single network device (such as a workstation or server). When a port on the switch is connected to a hub (a 10 or 100 Mbps repeater), the bandwidth provided by that port is shared by all the devices connected to the attached hub. How ever, when a port is connected to an end node or to a device that breaks up the collision domain (e.
SMC continues to leverage it’s experience and histor y in the technology industry to create value added products with advanced features - providing service tools for the m ost experienced VAR or MIS Director.
Network Application – Corporate LAN connecting to a re mote site Router Use copper to connect locations up to 100 meters away at gigabit speeds. Shown w ith optional copper module Corporate LA N Sma.
Network Administrators will find the SMC8506T an easy solution to integrate into a network as technology migrates toward gigabit. It’s Store-and-Forward architecture combined wi th a large MA C Addr.
Table and smart functions, ensures data integrity as the network is optimized to run at full wire speeds. Gigabit Ethernet is the p erfect solution to bottlen ecks at the co re of the network that are the inevitable res ult of data-intensive applications and the proliferation of new users.
Switch Operation Addr es s Ta ble The SMC8506T is implemented with a 24K MAC a ddress table. This large address table is used to store the addr ess information of nodes in the network, including MAC address, port no, etc. This information comes from the learning process of this gigabit switch.
an internal buffer, do the co mplete error checking before transmission. Therefore, no error packe ts occurrence, it is the bes t choice when a n etwork needs efficiency and stability .
or Full-Duplex mode. 1000Base-TX and 1000Base-SX can onl y connected Full-duplex mode..
Chapter 3 Configuring the SMC8506T Configuration Operation Docu ment Launch your “Hyper Terminal” pro gram and crea te a new connection with the following sett ings.
Sub men u: (0 ) Po rt S ett in g Use Tab or the “U”,”D”, ”L”,”R” keys to move to the item needing to be changed, press th e space bar to chang e it, and ”S” to save th is configuration. [Port Set ting] [1] [2] [3] [4] [5] [6] [7] [8] Auto Neg.
Submenu :(1) VLAN O Æ enables the port y ou select X Æ disables the port you select Use Tab or the “U”,”D”, ”L”,”R” keys to move to the item needing to be changed, press th e space bar to chang e it, and ”S” to save th is configuration.
Sub men u: (2 ) T RUN K O Æ enables the port y ou select X Æ disables the port you select Trunk port members must belong to same VLAN group. Use Tab or the “U”,”D”, ”L”,”R” keys to move to the item needing to be changed, press th e space bar to chang e it, and ”S” to save th is configuration.
Subme nu: (3) A gi ng Con trol Use Tab or the ”L” or”R” keys to move to the item needi ng to be changed, press the space bar to change it, and ”S” to save this configuration.
Subme nu: (5) P ort Mirr ori ng Use Tab or the ”L” or ”R” key s to move to the item needing to be changed, press the space bar to change it, and ”S” to save this configuration.
Sub men u: (6 ) Po rt- ba sed P ri ori ty Use Tab or the ”L” or ”R” key s to move to the item needing to be changed, press the space bar to change it, and ”S” to save this configuration. [Port-base pri ority] [1] [ 2] [3] [4] [5] [6] [7] [8] level T T T T T T T T / T : the prio rity depend on 802.
Submenu: (7) Mac address filter Use Tab or the “U”,”D”, ”L”,”R” keys to move to the item needing to be changed, press th e space bar to chang e it, and ”S” to save th is configuration.
Sub menu: (8) Ch ange pas swo rd User can set password for securi ty , press enter key to disable password check when system boot Subme nu: (9) R est or e to Fa cto ry Def aul t This item will restore.
Chapter 3 Glossary 10BASE2: IEEE 802.3 Physical Layer Spe cification for th in cable Etherne t (also called Thi n Ethernet) using standar d coaxial cable. It is a cost effective ne twork cable that exten ds up to 200 meters (hence the 2), however, the safety lim it is 185 meters before the signal attenuates.
plugs) connectors and has a cable len gth span of up to 100 meters. It has two versions, STP (S hielded Twisted P air) which is mor e expensive and U TP (Unshielded Tw isted Pair ), the most popular cable. Both these cables come in 5 different cate gories.
PCMCIA, CardBus, etc. ADAPTIVE CUT-THROUGH A switch forwar ding cut-thro ugh technolog y that adapts it s data forwarding pr ocess (Cut-Through, Fragm ent-Free, Store & Forw ard) accord ing to the data erro r rate within th e network.
BNC Commonly use d connector for coaxial cab le. Often used for 10Mbps netw ork connection (or 10BASE 2 network communica tions). BUS An electrical inter-connecti on which allows two or more lines to be connected together. Circuit cards w ith the proper address will be ab le to access the appropriate i nformation from the bus.
COLLISION DOMAIN See CSMA/CD. COMBINATION CARDS Combo cards combine two or more funct ions in one card, ther eby extending the applicat ions avai lable from t he single slot found in most platfo rms. The most common are data /fax modems c ombined with netw ork interfac e cards (NICs).
EISA Extended ISA, P C bus standard that ex tends the AT bus (ISA bus) to 32 bits a nd provides bus master ing. It was a nnounced in 19 88 as a 32-bit a lternative to the Micro Channel that woul d preserve inves tment in existing boar ds. PC and AT cards (ISA cards) can als o plug into EISA slots.
event of a power failure, a disk crash or a major user error, data is not lost and the system can keep running. FRAGMENT-FREE FORWARDING A type of forwarding method used in swi tches that allows da ta to be forwarde d through after the first 64bytes of each data packe t is checked due to the data error rate condition of t he network.
IEEE 802.1 Standard for loca l area networks whic h covers networ k manage ment and other aspects related to LA Ns. IEEE 802.2 Specifies the Logical Li nk Control (da ta link layer) for the following ac cess methods (physical layer): IEEE 802.3 Specifies CSMA/CD, popularized by Etherne t.
INTERRUPT REQUEST (IRQ) Hardware interrup t on a PC. Eight lines (0-7 on 8086/88s) and 16 lines (0-15 on 286 and up) acce pt interruption fr om input device s, such as a scanne r or network adapter. INTERNATIONAL STAN DARDS ORGANIZATION (ISO) Organization tha t sets international standard s; founded in 1946 and headq uartered in Geneva.
NETWARE Novell's fam ily of netw ork operating sys tems that runs on 286 PCs and u p and supports DOS, Windows, OS/2 and Mac workstations. It works with a variety of LAN access methods, inc luding Toke n Ring, Etherne t, ARCNET and Starlan. NETWORK A set of communicati on channel s interconne cting several or many locat ions.
PERIPHERAL COMPONENT INTERCONNECT (PCI) Local bus for PCs fr om Intel that pr ovides a hi gh-speed dat a path betwee n the CP U and up to 10 pe ripherals (video, disk, network, etc.). The PCI bus runs a t 33MHz, support s 32-bit and 64-bit data paths, and bus master ing.
NIC Network Interface Card or adapter t hat enables term inals to connec t to a network line . PORT (1) The entrance or physical acce ss point to a repe ater, computer , multiplexer, device or netw ork where signa ls may be supplied, extracted or observed.
and selects the most effective rou te. A router receive s physical lay er signals from a network, per forms data lin k and networ k layer pr otocol proce ssing, then send s the signals via an appr opriate da ta link and physical layer protocols to a nother netw ork.
The term for di splay indicat ors used to monitor all critical ac tivities in an Acc ton hub or switch. SPANNING-TREE ALGORITHM A technol ogy that checks your ne twork fo r any loop configura tions. A l oop can often occur in com plicated or back-up linked network syst ems.
network into sm aller network s and then inter connects the segments to ena ble them to co mmunicate with ea ch other. SWITCHED PORTS Ports that are on separate collision domains o r segments. TF Twisted pair and fiber optic cable com patible TP Twisted pair cable TWISTED-PAIR CABLE SEGMENT The cable used to join a repeate r and an adapter .
Communicat ion network that covers wide geographic areas, such as states and countries. WORKGROUP Two or more individ uals who share files a nd database s.
FOR TECHNICAL SUPPORT, CALL: From U.S.A. and Canad a (24 hours, 7 day s a week) (800) SMC-4-YOU; (9 49) 707-2400; (949) 70 7-2460 (Fax) From Europe (8:0 0 AM - 5:30 PM UK Green wich Mean Time) 44 (0) 1188 748740; 44 (0) 1189 748741 (Fax) INTERNET E-mail address: techsupport@smc.
Een belangrijk punt na aankoop van elk apparaat SMC Networks SMC8506T (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen SMC Networks SMC8506T heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens SMC Networks SMC8506T vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding SMC Networks SMC8506T leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over SMC Networks SMC8506T krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van SMC Networks SMC8506T bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de SMC Networks SMC8506T kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met SMC Networks SMC8506T . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
