Gebruiksaanwijzing /service van het product SPLH170KW van de fabrikant Snapper
Ga naar pagina of 30
Safety Instructions & Operator’s M anual for PRO HYDRO WALK BEHIND MOWERS MID-SIZE SERIES 0 POWER UNIT MODELS MOWER UNIT MODELS SPLH140KW SPLH170KW SPLH140KH SPLH150KH SPLH160BV SPLH140KWE SPLH1.
2 IMPORTA N T SA FETY INSTRUCTIONS WARNING: This powerful cutting machine is capable o f amputating han ds and feet and can th row objects t hat can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IMPORTA NT SA FETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 4. Handle fuel w ith extra care. Fuels are f lammable and vap ors are explosiv e. Use only an approved fuel cont ainer. Never remove fuel cap o r ad d fuel with engine running.
4 TA BLE OF CONTENTS IMPO RTA NT SA FET Y INSTRUCTIO NS ...................................................................................2-3 TABLE OF CONTENT S .........................................................................................
5 SECTION 1 - FA MILIA RIZA TION FIGURE 1.1 1.1 NOMENCLATURE The nom enclature drawing above Figure 1.1 shows the es sential parts of the SNAPPER PRO Mid-Size Mowers. It is recom mended that all operator s of this equipm ent become thor oughly fam iliar with the controls, parts and operation of this m achine before oper ating.
6 SECTION 2 - CONTROLS Before operating, become familiar w ith all the controls (See Figure 2.1A) and how to use them. Know beforehand how to STOP the Right Hand and Left Hand Traction W heel Drives, the Mo wer Blades, and th e Engine in preparation for a possible emergency.
7 SECTION 3 - OPERA TING INSTRUCTIONS 3.1 PRE-STA RT CHECKLIST Make the following checks and perform the services as required bef ore each start-up. IM PORTANT: Bef ore starting your SN A PPER Pro Hydro machine, the hydraulic reserv oir and engine MUS T be filled to the proper lev el with oil.
8 SECTION 3 - OPERA TING INSTRUCTIONS 3.2 STOPPING IMPO RTA NT : Pulling bac kward on both Traction Controls back past Neutral position will cause the m achine to back up. 1. Pull back on both Tr action Controls sim ultaneously towards handle bar. Manually engage the Neutral Latch Lever.
9 SECTION 3 - OPERA TING INSTRUCTIONS WA RNING The SNA PPER Pro Hydro Mo wers have a Transport Speed, w hich allow s the machin e to travel forw ard at a speed of 6 M P H - it is NOT to be used w hile.
10 SECTION 3 - OPERA TING INSTRUCTIONS 3.5 MOWER OPERA TION (Continued from Previous Pa ge) 4. Move Engine Speed Control to the F AST (Rabbit) position. Refer to Figure 3.4. 5. W hile holding both T raction Controls in the neutral position, release Neutr al Latch Lever by pulling controls s lightly back wards.
11 SECTION 3 - OPERA TING INSTRUCTIONS 3.7 HA NDLE HEIGHT ADJUSTMENT (Continued from previous page ) STEP 3: Ins ert rod (5/16” diam eter x 7 3/4” long) through alignm ent holes in the left and right traction control shif t lever arms and the s w itch brac ket.
12 SECTION 3 - OPERA TING INSTRUCTIONS 3.8 A DJUSTING CUTTING HEIGHT (Fixed Decks) The Mow er has three methods of adjusting cutting height listed as f ollow s: 1. Moving position of BLADE on c utter spindle shaft. 2. Moving position of CAST ER W HEEL on support.
14 SECTION 3 - OPERA TING INSTRUCTIONS 3 . 11 ADJUSTING FIXED DECK A TTA CHMENT The Mower Deck has four dif ferent positions for attaching it to the power unit.
14 SECTION 3 - OPERA TING INSTRUCTIONS WA RNING Shield the positive t ermin al with termin al cover located on bat tery harness. T his prevents met al fro m touching the positive terminal, which could cause sparks. Cables must b e connected to battery terminals in the proper position.
15 SECTION 3 - OPERA TING INSTRUCTIONS 3.17 NEW BATTERY PREPA RA TION 1. Remove batter y from c arton. 2. Place battery in a well ventilated area on a level non- concrete s urface. 3. Rem ove battery ce ll caps. Fill cells as required with electrolyte (purchas ed separately) to proper level.
16 SECTION 4 - SERVICE TA BLE OF CONTENTS ENGINE TROUBLESHOOTING ................................................................................................... 17 MOW E R TROUBLESHOOTING ...........................................................
17 SECTION 4 - ENGINE TROUBLESHOOTING SYMPTOM PROBLEM SOLUTION PA GE Engine Key OFF. Turn Key to Run. 8 does not Fuel Tank empty. Fill Fuel Tank. 7 start.. Fuel Shut-Off Closed. Open Fuel Shut-Off. 8 Engine Throttle Control not at FAST Put Engine Throttle Control to FAST (Rabbit) (Rabbit) position.
18 SECTION 4 - SERVICE & LUBRICA TION CHA RT FIGURE 4.1 TRA CT ION CON TROL LEVER S Lubricate eac h w ith Pum p Oiler (hand held oil can). INTERLOCK SW ITCHES Inspec t s w itc hes for ease of operation. DO NOT LUBRIC ATE! HYDRA UL I C OIL Use SAE 10W-30 Oil.
19 SECTION 4 - SERVICE WA RNING Once blades are disengaged, the y should come to a complete stop in 7 se conds. If the blades continue to rotate afte r 7 seconds , the electr ic clutch should be checked . Replacement of electric clutch may be necessary.
20 SECTION 4 - SERVICE 4.2.3. HYDRAULIC PU M P REMOVAL (Continue d) 2. Loosen Nut on Belt Guide at rear of Engine Pulley and rem ove Cutter Deck Belt f rom Engine Pulley. 3. Remo v e Hydraulic Pump Belt. 4.2.4. HYDRA ULIC PUMP BELT INST A LLA T ION 1.
21 SECTION 4 - MOWER ATTA CHMENT SERVICE 4.4 CUTTER DECK BELT REMOVA L & INSTA LLATION 4.4.1. 36” CUTTING DECK BELT REM OVA L 1. Move Mower onto a sm ooth, level surface. T urn Ignition Key to STO P position, remove Key, disconnect Spark Plug W ire and secur e W ire away from Spark Plug.
22 SECTION 4 - SERVICE & LUBRICA TION HOURS PROCEDURE COMM ENTS BREAK-IN Check all f asteners f or proper tightness Change Engine Oil and Filter at 5 hours .............................. See engine manual Change Hy draulic O il and Filter at 25 hours .
23 SECTION 4 - MOWER A TTA CHMENT SERVICE 4 . 4 . 6 . SPINDLE TO SPINDLE DECK BELT INSTA LLATION - 48”, 52”, & 61” CUT TING DECKS 1. Route new belt for 48” cutting dec k , 52” cutting deck , and 61” cutting decks , onto bottom groove of c enter Spindle Pulley and left hand Spindle Pulley.
24 1 YEA R LIMITED WA RRA NTY For one (1) year from purchase date for the original purchaser's us e, SNA PPER , through any authorized SNA PPER dealer w ill replac e, free of char ge (except for .
25 PRIMARY MA INTENANCE.
26 PRIMARY MA INTENA NCE.
27 PRIMARY MA INTENA NCE.
28 PRIMARY MA INTENA NCE.
29 SERVICE NOTES ______________________________________________________________________________ ______________________________________________________________________________ _________________________.
30 Safety Instructions & Operator’s Manual for PRO HYDRO M ID-SIZE WALK BEHIND M OWERS SERIES 0 WARNING: The engine exhaust from this product contains chemicals know n to the State of Californi a to cause cancer, birth defects or other reproduct iv e harm.
Een belangrijk punt na aankoop van elk apparaat Snapper SPLH170KW (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Snapper SPLH170KW heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Snapper SPLH170KW vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Snapper SPLH170KW leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Snapper SPLH170KW krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Snapper SPLH170KW bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Snapper SPLH170KW kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Snapper SPLH170KW . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
