Gebruiksaanwijzing /service van het product CFD-ZW150 van de fabrikant Sony
Ga naar pagina of 32
CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 3-859-373- 12 (1) 1996 by Sony Corporation Operating Instructions CD Radio Cassette-Cor der CFD-ZW150 CFD-ZW160 CFD-ZW200.
CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 Introduction 2 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. This symbol is intended to alert the user to the .
Basic Operations 3 Introduction CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 T able of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The.
Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 4 Playing a CD Basic Operations Track number Playing time 3 With the label side up Display For hookup instructions, see pages 20 – 22. 1 Push PUSH OPEN down to open the CD compartment and place the CD on the CD compartment.
Basic Operations Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 5 Use these buttons for additional operations Tip Next time you want to listen to a CD, just press ^ .
Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 6 Listening to the radio For hookup instructions, see pages 20 – 22. 1 Press RADIO (direct power-on). 2 Turn BAND to select the band you want. 3 Turn TUNING to tune in the station you want.
Basic Operations Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 7 Use these buttons for additional operations Tips • If the FM broadcast is noisy, set FM MODE/ ISS at the rear to “MONO”. Radio will play in monaural. • Next time you want to listen to the radio, just press the RADIO button.
Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 8 Playing a tape For hookup instructions, see pages 20 – 22. 1 Press TAPE (direct power-on). 2 Press p6 to open tape compartment and insert a recorded tape. Close the compartment. 3 Press ( .
Basic Operations Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 9 Use these buttons for additional operations To Press or slide Adjust the volume VOLUME +/– Stop playback p6 Fast-forward or rewind the tape ) or 0 Pause playback P Press the button again to resume play after pause.
Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 10 Recording on a tape For hookup instructions, see pages 20 – 22. 1 Press p6 to open the tape compartment on deck B and insert a blank tape. 2 Select the program source you want to record.
Basic Operations Basic Operations CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 11 3 Start recording. To record, press r on deck B ( ( is depressed automatically). For high speed dubbing, after depressing HI-SPEED DUBBING, press r on deck B ( ( is depressed automatically).
The CD Player CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 12 Using the display You can check information about the CD using the display. The CD Player DISPLAY/ ENTER Checking the total track numbers and playing time Press DISPLAY/ENTER in stop mode.
The CD Player CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 13 The CD Player Locating a specific track You can quickly locate any track using the number buttons (CFD-ZW160/ ZW200 only). You can also find a specific point in a track while playing a CD.
The CD Player CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 14 Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 15). 1 Press CD. “Cd” appears in the display. 2 Press PLAY MODE until the repeat mode you want appears in the display.
The CD Player CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 15 The CD Player Creating your own pr ogram (Program Play) You can make a program of up to 20 tracks in the order you want them to be played. 1 Press CD. “Cd” appears in the display. 2 Press PLAY MODE until “PGM” appears in the display.
The Timer CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 16 Setting the clock Before you set the clock, insert three size AA (R6) batteries and connect the AC power cord (see page 20 and 21.) As long as the clock goes, “:” flashes. The Timer 1 Press and hold CLOCK for about 2 seconds until “AM” or “PM” and the hour digit flash.
The Timer CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 17 The Timer W aking up to music You can wake up to music at a preset time. Make sure you have set the clock (“Setting the clock” on page 16). 1 Prepare the music source you want to play. To play Do this the radio Tune in a station a CD Insert a CD.
The Timer CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 18 Waking up to music (continued) Tips • The display window dims while the waking up timer is on. • You can have the player go on the next day at the same time. Just press STANDBY until the t indication appears in the display.
The Timer CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 19 The Timer Falling asleep to music You can set the player to turn off automatically after about 2 hours, allowing you to fall asleep while listening to music. 1 Play the music source you want.
Setting Up CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 20 Setting Up Hooking up the system Make sure you turn off the power before making any connections. Tips • To detach the speakers, unlock speaker (see B on the diagram) and slide the speaker box all the way up and away from the player.
Setting Up CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 21 Setting Up Note When you operate the player with the batteries, you cannot turn on the player using the remote (CFD- ZW160/ZW200 only). 2 Twist the speaker cable coating and strip it from the end of the cable.
Setting Up CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 22 Note When you operate the player with batteries, the backlight does not work even if the player is on. Tip Replace the batteries when the OPR/BATT indicator dims or when the player stops operating.
Setting Up CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 23 Setting Up Adjusting the audio emphasis (MEGA BASS/4 BAND GRAPHIC EQUALIZER/SURROUND) You can adjust the audio emphasis of the sound you are listening to. continued Selecting the sound characteristic Slide 4 BAND GRAPHIC EQUALIZER to select the audio emphasis you want.
Setting Up CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 24 Adjusting the audio emphasis (MEGA BASS/4 BAND GRAPHIC EQUALIZER/SURROUND) (continued) Getting the surround effect (CFD-ZW160/ ZW200 only) Press SURROUND. The “SURROUND” indication appears in the display.
Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 25 Precautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.
Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 26 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 27 T r oubleshooting Remedy • Connect the AC power cord to a wall outlet securely. • Make sure the batteries are inserted correctly. • You cannot turn on the player with the remote when you operate the player on batteries.
Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 28 Remedy • Close the cassette compartment securely. • Make sure the safety tab on the cassette is in place. • Make sure “TAPE” appears in the display. • Clean the erasing head (see page 29.
Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 29 Maintenance Demagnetizing the tape heads After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high frequency sound and hiss.
Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 30 Specifications AUDIO POWER SPECIFICATIONS CFD-ZW150/ZW160: POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 3.2-ohm loads, both channel driven from 250 - 6,300 Hz; rated 3.8 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion in AC operation.
Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 31 Battery life For CD radio cassette-corder: CFD-ZW150/ZW160 FM recording Sony R20P: approx. 6.5 h Sony alkaline LR20: approx. 12 h Tape playback Sony R20P: approx. 3 h Sony alkaline LR20: approx.
Additional Information CFD-ZW150/.ZW160/ZW200.E_3-859-373-1X.U2/CA2/AU6 32 Index A Audio emphasis 23 B Batteries for player 22 f or memory back-up 20 for remote 21 C CD player 12 Cleaning cabinet 29 t.
Een belangrijk punt na aankoop van elk apparaat Sony CFD-ZW150 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony CFD-ZW150 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony CFD-ZW150 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony CFD-ZW150 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony CFD-ZW150 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony CFD-ZW150 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony CFD-ZW150 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony CFD-ZW150 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
