Gebruiksaanwijzing /service van het product CMT-VP11 van de fabrikant Sony
Ga naar pagina of 44
Operating Instructions Micr o HiFi Component System 4-227-682- 11 (2) ©2000 Sony Corporation CMT -VP11.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 T able of Contents Getting Started Step 1: Hooking up the system ................ 4 Step 2: Setting the time ............................ 7 Step 3: Presetting radio stations — Preset .. 8 Connecting optional components .............. 9 Basic Operations Playing a VIDEO CD .
4 2 Connect the FM and AM antennas. Set the AM loop antenna up before connecting it. FM 75 Ω AM ANTENNA U U 1 Connect the speakers. Connect the right and left speaker cords to the SPEAKER terminals as shown below. 3 # # L 3 R Note Keep the speaker cords away from the antennas to prevent noise.
5 Getting Started 3 Connect the VIDEO OUT jack to the video input jack on your TV with the supplied video connecting cord. VIDEO OUT When using a TV Turn on your TV and set the input selector to video input so you can view the pictures from the system.
6 Inserting two size-AA (R6) batteries into the remote Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Notes on batteries • Make sure the battery poles (plus/minus) are properly oriented.
7 Getting Started Step 2: Setting the time Before you can use the system’s timer functions, set the internal clock. + – # 2 N Xx nN .> z mM y 1 2,4 3,5 1 Press TIMER SET. The hour indication flashes. AM1200 2 Press +/– repeatedly to set the hour.
8 2 Press TUNER BAND to select FM or AM. 3 Press TUNING MODE repeatedly until “AUTO” appears. 4 Press TUNING +/–. The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for stereo programs only) appear.
9 Getting Started To tune in a weak station In step 3, press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear, then press TUNING +/– repeatedly to tune in the station.
10 Connecting an MD deck for digital recording By connecting an MD deck to the system with a commercially available optical cable, you can make a digital recording from a CD. To the digital input connector on the MD deck Note You cannot make a digital recording from a VIDEO CD to an MD deck through an optical cable.
11 Getting Started Connecting headphones Connect headphones to the PHONES jack. Z ux . > m M + – PHONES jack Connecting external antennas You can connect an external antenna to your system to get better reception. FM antenna Connect a commercially available external FM antenna to the FM ANTENNA terminals as shown below.
12 1 Turn on your TV and select the video input. Refer to the operating instructions supplied with your TV for details. 2 Press CD EJECT Z and place a VIDEO CD on the disc tray. The disc tray opens. If the disc is not placed properly, it may not be recognized.
Basic Operations 13 Playing a CD — Normal Play Do the procedure below to play a CD starting from the first track. To turn on the system, press ?/1 . Z bB x mM Xz Z ux . > m M + – CD x CD . / > m / M 4 3 1,2 VOLUME 1 Press CD EJECT Z and place a CD on the disc tray.
14 Recording from a CD/ VIDEO CD to a tape — CD Synchro Recor ding The CD Synchro Recording function makes it easy to record from a CD/VIDEO CD to a tape. Both Type I (normal) and Type II (CrO 2 ) tapes can be used. To record only the tracks that you want, it is convenient to use the Program Edit function (see page 31).
Basic Operations 15 1 Press TAPE EJECT Z and insert a recordable tape into the cassette holder. With the side you want to record on facing towards you Z bB x mM Xz 2 Press CD EJECT Z and place a CD/ VIDEO CD on the disc tray.
16 Listening to the radio — Preset T uning Presetting radio stations in the system’s memory in advance makes it easy to tune in those stations later (see “Step 3: Presetting radio stations” on page 8). To turn on the system, press ?/1 . Z bB x mM Xz Z ux .
Basic Operations 17 Recording from the radio Do the procedure below to tune in a preset station (see page 16) and record from the radio to a tape. Both Type I (normal) and Type II (CrO 2 ) tapes can be used. To turn on the system, press ?/1 . Z bB x mM Xz Z ux .
18 Recording from the radio (continued) 1 Press TUNER. “TUNER” appears. 2 Press TUNER BAND to select FM or AM. 3 Press TUNING MODE repeatedly until “PRESET” appears. 4 Press TUNING +/– repeatedly to display the preset number of the desired station.
Basic Operations 19 Playing a tape The system can play three types of tapes: Type I (normal), Type II (CrO 2 ) and Type IV (metal). The system automatically detects the tape type so there is no need to specify it. To turn on the system, press ?/1 . Z bB x mM Xz Z ux .
20 Singing along: Karaoke Do the procedure below to suppress the singer’s voice on any stereo CD/VIDEO CD in order to sing along. To do this, you need to connect an optional microphone. To turn on the system, press ?/1 . Z bB x mM Xz Z ux . > m M + – 1,5 24 4 + – # 2 + + –– O N Xx nN .
Basic Operations 21 1 Turn MIC VOL to 0 to turn down the microphone volume level. 2 Connect an optional microphone to MIC IN. 3 Press K.PON/MPX on the remote repeatedly to obtain the karaoke effect you want.
22 The VIDEO CD/CD Player Playing a VIDEO CD with PBC functions (V er . 2.0) –– PBC Play When you play a VIDEO CD with PBC (Play Back Control) functions, you will be able to use menus on your TV screen to enjoy the disc’s interactive software.
23 The VIDEO CD/CD Player Checking the remaining playing time Do the procedure below to check the remaining playing time of the current track or the entire CD/ VIDEO CD.
24 In the stop mode t Total number of tracks and total playing time r Clock display r Current source display Note If the CD/VIDEO CD contains 20 tracks or more, the remaining playing time of the current track will appear as “- - . - -” for each track starting with the 20th.
25 The VIDEO CD/CD Player continued • While an audio CD is stopped (except during Program Play) 9 29:48 CD STOP CONTINUE 1 2 3 4 5 6 7 8 9 REPEAT 1 2 1 4 3 1 Total number of .
26 • While a VIDEO CD or an audio CD is stopped in Program Play 9 29:48 CD STOP PROGRAM(STEP/TRK) 1/ 1 6/ 8 2/ 3 7/ 4 3/ 5 8/ 7 4/ 2 9/ 6 5/ 9 REPEAT 1 2 1 4 3 1 Total number of.
27 The VIDEO CD/CD Player Resuming VIDEO CD playback from the point last stopped at –– Resume Play When you stop VIDEO CD playback, the system memorizes the stopping point so that you can resume playback from that point. Resume Play is not cancelled when you turn off the system.
28 Playing CD/VIDEO CD tracks repeatedly — Repeat Play The Repeat Play function lets you playback a single track or all the tracks on a CD/VIDEO CD repeatedly in Normal Play. You can also use Repeat Play function while in Shuffle Play or Program Play.
29 The VIDEO CD/CD Player Playing CD/VIDEO CD tracks in a favorite order –– Program Play You can make a program of up to 20 tracks on a CD/VIDEO CD in any order that you want. After setting the order, you can also make a synchronized tape recording of the tracks (see page 31).
30 The Tape Deck Recording to a tape manually Do the procedure below to manually record from any source to a tape. For example, tracks from a CD, the radio, or from any of the connected components. This lets you record just the songs that you want from a CD/VIDEO CD.
31 The Tape Deck continued Recording your favorite CD/VIDEO CD tracks to a tape — Program Edit With Program Edit function, you can select only the CD/VIDEO CD tracks that you want using the Program Play function, then record the programmed tracks to a tape using the CD Synchro Recording function.
32 Recording your favorite CD/ VIDEO CD tracks to a tape (continued) 9 Press CD SYNC. The tape stands by for recording and the VIDEO CD/CD stands by for playback.
33 Other Features Other Features Adjusting the sound Not only can you adjust the bass and treble, you can use the DSG (Dynamic Sound Generator) function to enjoy a more powerful sound. Z bB x mM Xz Z ux . > m M + – DSG TREBLE BASS Generating a more dynamic sound , Press DSG.
34 2 Press VOL +/– repeatedly to adjust the volume. 3 Press TIMER SET. 4 Press +/– repeatedly until “SET DAILY” apperars. “SET DAILY” scrolls and “ c DAILY” appears in the display. 5 Press ENTER. “ON TIME” appears, then the hour indication flashes.
35 Other Features Timer -activated recording of radio programs — REC Timer Set the REC Timer to make the system start recording from a preset radio station at a specified time (see “Step 3: Presetting radio stations” on page 8).
36 4 Press +/– repeatedly until “SET REC” appears. “SET REC” scrolls and “ c REC” appears in the display. 5 Press ENTER. “ON TIME” appears, then the hour indication flashes. AM1200 REC c 6 Set the starting time. Press +/– repeatedly to set the hour, then press ENTER.
37 Additional Information Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply.
38 Precautions (continued) T roubleshooting Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action.
39 Additional Information Tape Deck Recording cannot be done. • There is no tape in the cassette holder. • The record protect tab has been removed from the cassette (see page 37). • The tape has come to the end. The tape does not record or play, or there is a decrease in sound level.
40 Tuner There is a severe hum or noise (“TUNED” or “STEREO” flashes). • Adjust the antenna. • The signal strength is too weak. Connect an external antenna (see page 11). • Make sure that the antenna is connected properly. • Do not bend or roll up the antenna.
41 Additional Information Tape player section Recording system 4-track 2-channel stereo Frequency response (DOLBY NR OFF) 50 - 13,000 Hz (±3 dB), using a Sony TYPE I cassette 50 - 14,000 Hz (±3 dB), using a Sony TYPE II cassette Wow and flutter ±0.
42 Parts identification for the remote You can also operate the system with the supplied remote. Buttons marked with “*” are provided only on the remote. TUNER Remote Button(s) Function TUNER BAND Selects FM or AM. Remote Button(s) TUNING MODE For operating the Function SELECT/CD N VIDEO CD/CD VIDEO CD Starts playback.
43 Additional Information Numeric buttons* VIDEO CD Selects a number from the menu during playback of a VIDEO CD with PBC functions (Ver. 2.0). To enter numbers over 10, first press >10, then press the numeric buttons. To enter 0, use the 10/0 button.
Sony Corporation Printed in Korea Index A Adjusting the bass 33 the treble 33 the volume 13, 14, 16, 20 Antennas 4, 11 Automatic Source Selection 13, 14, 17, 20 B Batteries 6 C Clock setting 7 Connecting.
Een belangrijk punt na aankoop van elk apparaat Sony CMT-VP11 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony CMT-VP11 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony CMT-VP11 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony CMT-VP11 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony CMT-VP11 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony CMT-VP11 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony CMT-VP11 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony CMT-VP11 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
