Gebruiksaanwijzing /service van het product DHC-MD555 van de fabrikant Sony
Ga naar pagina of 100
Mini Hi-Fi Component System ©1998 by Sony Corporation Operating Instructions 3-864-822- 13 (1) DHC-MD555 Owner’s Record The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 * European model only ** “MD WALKMAN” is a trademark of Sony Corporation. T able of Contents Getting Started Step 1: Hooking up the system ............. 4 Step 2: Setting the time ........................... 8 Step 3: Presetting radio stations .
4 Getting Started Step 1: Hooking up the system Perform the following procedure 1 to 5 to hook up your system using the supplied cords and accessories. The supplied antennas are for indoor use. We recommend connecting a commercially available antenna to ensure stable reception.
Getting Started 5 p Transport cartridge Preparation Pull the transport cartridge straight toward you out of the MD deck. Tip Keep the transport cartridge for future use. When you move the system, insert the cartridge into the MD 4 slot of the MD deck in the same manner as when you purchased the system to prevent deck trouble (see page 82).
6 Step 1: Hooking up the system (continued) Plastic stand Antenna The antenna is the proper shape and length for receiving AM radio waves, so do not remove or roll up the antenna. A B 2 Connect the AM antenna. Structure of the supplied AM antenna To set up the AM antenna 1 Remove only the twisted portion ( ) of the antenna from the plastic stand.
Getting Started 7 220-240V 110-120V VOLTAGE SELECTOR continued To connect the FM antenna 1 Insert the antenna cord into the FM antenna terminal. 2 Pull gently on the antenna cord to make sure it is connected correctly. If the antenna cord pulls out, connect it again.
8 Step 1: Hooking up the system (continued) ] ] } } R6 (size AA) batteries · P · P p p 0) 66666 1 2,3,4 UPPER DISPLAY LOWER DISPLAY CURSOR N / n Inserting two R6 (size AA) batteries into the remote Always insert the batteries from the ’ end as shown in the illustration.
Getting Started 9 2 Turn MULTI JOG and set the day, then press ENTER/YES. The hour indication flashes. (For models using a 12-hour system, noon is indicated as 12:00 PM, and midnight as 12:00 AM.) 3 Turn MULTI JOG and set the hour, then press ENTER/YES.
10 12 3 4,5,7 5 6,8 · P · P p p 0) 66666 Step 3: Pr esetting r adio stations You can preset the following number of stations: – North American model: 20 for FM, and 10 for AM. – European model: 20 for FM, 10 for MW, and 10 for LW. – Other models: 20 for FM, 10 for MW, and 10 for SW.
Getting Started 11 Storing the radio station 5 Press MENU/NO, then turn MULTI JOG until “Memory?” appears. 6 Press ENTER/YES. The preset number starts flashing.
12 MD1 MD2 MD3 MD4 MD5 MD4 Direct Touch Editor Power Saving Mode ” Features of the DHC-MD555 Featur es of the DHC-MD555 MD 5-disc changer CD 5-disc changer Stocker Recording/ playing unit Elevator T.
Basic Operations 13 Playing and recording MD editing, etc. Playing mode and radio reception mode selection Stocker CD tray 1 5 2 3 4 4 Easy-to-use, direct touch editor The recording, editing and other control buttons are featured in a centralized layout by type of operation, making operation simple and easy.
14 With the label side up. When you play a single CD, place it on the inner circle of the tray. 1 Press any C D1–5 6 and place a CD on the disc tray. The disc tray opens. Press the same 6 again to close the tray. To load other CDs, press a different 6 and place the CD in the disc tray.
Basic Operations 15 To start play from a different CD or to play only one CD, press C D1–5 for the tray containing the desired disc. Play starts from the CD whose button was pressed. To Do this Stop play Press p for the CD. Pause Press ·P for the CD (or CD P on the remote).
16 With the label side up. When you play a single CD, place it on the inner circle of the tray. 1 / u (power) 1 / u (power) · P · P p p 0 ) 66 6 6 6 Recording a CD on an MD — Select Synchro Recording You can make a digital recording of a CD on an MD, marking track numbers in the same sequence as the original CD.
Basic Operations 17 2 Insert a recordable MD to MD 1. Open the MD cover, slide the disc into the MD 1 slot, and then close the cover. 3 Press FUNCTION repeatedly to switch the function to CD. Recording 4 Press SELECT SYNC. “SELECT” appears, and the CD 1 – 5 buttons flash.
18 Ejecting an MD Open the MD cover, and pull the MD out from the slot. If the MD has been loaded inside the unit (i.e., the corresponding MD 1 – 5 button is lit green), press MD 6 so that the MD is returned to the slot, and then pull the MD out from the slot.
Basic Operations 19 1 / u (power) : ALL DISCS : 1DISC 1 Insert an MD to MD 1 – 5. Open the MD cover, slide the disc into the slot, and then close the cover. p P = + · p · 0) ª p P · = + 3 2 4 MD = / + MD P MD p MD D.SKIP VOL (+/ – ) 2 Press FUNCTION repeatedly to switch the function to MD.
20 To Do this Stop play Press p for the MD. Pause Press ·P for the MD (or MD P on the remote). The light on the ·P button changes from green to orange.
Basic Operations 21 1 / u (power) 1 / u (power) 3 1 STEREO/ MONO VOL (+/ – ) p P = + · p · 0) ª p P · = + · P · P p p 0) 66666 12 3 VOLUME STEREO/MONO Listening to the r adio — Preset Tuning Preset radio stations in the tuner’s memory first (see page 10).
22 Station name* Preset number Frequency 2 Press TUNING MODE repeatedly until “PRESET” appears. 3 Turn MULTI JOG to tune in the desired preset station. Or press PRESET (+/–) on the remote. * The station name is displayed only when you have assigned a name to the preset station (see page 69).
Basic Operations 23 MD 6 · P · P p p 0) 66666 4 7 2 1 8 3 5 MD 1 – 5 MD p 1 / u (power) 1 / u (power) Recording fr om the r adio — Manual Recording You can analog record a radio program on an MD. If the power is off, first press 1/u (power) to turn on the system.
24 Displays “ 1DISC ” Preset number Frequency Station name* 3 Press TUNING MODE repeatedly until “PRESET” appears. 4 Turn MULTI JOG to tune in the desired preset station. Or press PRESET (+/–) on the remote. * The station name is displayed only when you have assigned a name to the preset station (see page 69).
25 Listening to a CD/MD MD: CD: Ejecting an MD Open the MD cover, and pull the MD out from the slot. If the MD has been loaded inside the unit (i.e., the corresponding MD 1 – 5 button is lit green), press MD 6 so that the MD is returned to the slot, and then pull the MD out from the slot.
26 Notes • You cannot use Program Play or Repeat Play for all tracks during Shuffle Play for “ALL DISCS”. • If you press PLAY MODE to change the play mode while playing an MD, “Push STOP !” appears. To change the play mode, press p first to stop play.
27 Listening to a CD/MD 2 Press PLAY MODE repeatedly until “PROGRAM” appears. 3 Press CD/MD 1 – 5 (or CD/MD D.SKIP on the remote) to select the desired CD or MD. CD: MD: To program all of the tracks on a single CD or MD at once, proceed to step 5 with “AL” displayed.
28 To cancel Program Play (If listening to an MD, press p to stop playing first.) Press PLAY MODE repeatedly until “PROGRAM” disappears. To cancel the programming operation Press p for the CD or MD during steps 3 to 5. To clear the last programmed track Press CLEAR in Program Play stop mode.
29 Listening to a CD/MD REPEA T MD = / + CD = / + p P = + · p · 0) ª p P · = + Playing tr acks r epeatedly — Repeat Play You can repeat a disc or all discs in normal play, “1DISC” Shuffle Play and Program Play. Playing all tracks or a program repeatedly / Press REPEAT during play until “REPEAT” appears.
30 n n n n n n Use the UPPER DISPLAY button to switch the display. Use the LOWER DISPLAY button to switch the display. p P = + · p · 0) ª p P · = + SCROLL UPPER DISPLA Y LOWER DISPLA Y n Using the display You can check the time remaining in a single track, or on an entire CD or MD.
31 Listening to a CD/MD n n n 17 2 CURSOR N p · P · P p p 0) 66666 UPPER DISPLA Y 4,5 69 CLEAR MENU/NO Checking a track title or a disc title / Press UPPER DISPLAY during play or in stop mode.
32 Labeling a CD (continued) Cursor Cursor 1 Press FUNCTION repeatedly to switch the function to CD. Note You can input disc titles only when the CD player is in stop mode. 2 Press PLAY MODE repeatedly until “SHUFFLE” or “PROGRAM” disappears. 3 Press CD D.
33 Listening to a CD/MD To cancel labeling Press p for the CD during steps 4 to 8. Checking a disc title 1 Press MENU/NO in stop mode. 2 Turn MULTI JOG until “Name Check?” appears, then press ENTER/YES. 3 Turn MULTI JOG until the CD 1 – 5 disc or the stored disc (001 to 100) you want to check appears.
34 · P · P p p 0) 66666 1 4 3 5 p Checking CD text information You can display the CD text (CD title, artist name, track titles and other information) when this information is recorded on the CD. Checking a disc title 1 Press FUNCTION repeatedly to switch the function to CD.
35 Recording on an MD After recording / Eject the MD, or press 1/u (power) and turn off the system. The TOC is updated and recording is completed. Before pulling out the power cord MD recording is completed when the MD Table of Contents (TOC) is updated.
36 MD1 MD Current track MD1 MD1 MD2 MD3 MD First track First track First track First track First track MD1 MD2 MD3 MD4 MD5 – – – – – Desired tracks Desired tracks Desired tracks Desired tracks Desired tracks T ypes of r ecording You can choose from the following 11 types of recording in accordance with the purpose.
37 Recording on an MD · P p p 0) · P 66666 2 3 6 1 4 7 p CLEAR MD1 MD2 MD3 MD4 MD5 ” Recording a CD MD1 MD2 MD3 MD4 MD5 – – – – – Desired tracks Desired tracks Desired tracks Desired tra.
38 Recording your favorite tracks (continued) CD tray number Selected CD and track number Track playing time Selected MD Remaining time on MD Total playing time 1 Press SELECT SYNC. “SELECT” appears, and the CD 1 – 5 buttons flash. 2 Press CD 1 – 5 to select the desired CD.
39 Recording on an MD MD1 MD1 MD2 MD3 To confirm/clear the selected contents Press MD 1 – 5 after step 4. Each time the button is pressed, the programmed CD disc numbers and track numbers for the selected MD appear in order. To clear the displayed contents, press CLEAR.
40 1 Insert the recordable MDs in order from the MD 1 slot. Recording starts in order from the MD in the MD 1 slot. Remove any unwanted MDs from the slots. If the MDs have been partially recorded, recording starts after the recorded tracks. 2 Press SEAMLESS.
41 Recording on an MD Recording only the first track — Hit Parade You can record the first track of each CD. This feature is useful when you record single CDs in succession. If the MD has been partially recorded, recording starts after the recorded tracks.
42 Recording the curr ent tr ack — Rec It You can record a track quickly while listening to a CD. If the MD has been partially recorded, recording starts after the recorded tracks. 1 Press MD D.SKIP on the remote repeatedly so the button of the desired MD lights green.
43 Recording on an MD · P · P p p 0) 6666 6 4 3 MD 1 – 5 UPPER DISPLA Y MD p PLA Y MODE CD ·P Recording your favorite portions — Manual Recording Use this method to record only certain portions of a CD, or to record tracks in the programmed order.
44 Making the space between tr acks 3 seconds long — Smart Space, Auto Cut If there is an extended silence during recording, this silence can be replaced with a blank of about 3 seconds. 1 Press REC, and set the MD deck to recording standby. 2 Press MENU/NO twice so that “Setup Menu” appears.
45 Recording on an MD Beginning of the source to be recorded When you press ENTER/YES in step 5 End of the source to be recorded Time Recorded portion 6 seconds ” Recording from the Radio · P · P .
46 To stop Time Machine Recording Press p for the MD. Tip You can adjust the recording level to the desired volume after performing step 4 (see page 48). Before pulling out the power cord MD recording is completed when the MD Table of Contents (TOC) is updated.
47 Recording on an MD · P · P p p 0) REC 1 Press FUNCTION repeatedly until “TUNER” appears. To record from an optional component connected to this system, select “TAPE” or “DVD (VIDEO)”. 2 Press REC to set the MD deck to recording standby.
48 Adjusting the r ecording level When recording on an MD, you can adjust the recording level to the desired volume. You can adjust the recording level not only when making an analog recording, but also when making a digital recording from a CD, etc. 1 Prepare the sound source you want to record and start play.
49 Recording on an MD Displayed during monaural recording Displayed when receiving a stereo signal 4 5 1 3 p · P · P p p 0) 66666 MD 1 – 5 Monaur al recor ding Stereo signals such as an FM stereo broadcast can be converted to monaural format and recorded.
50 Editing an MD Befor e you start editing Before you start editing You can edit an MD only when: • The MD is not record-protected. • The MD play mode is normal play. Be sure to check the following before starting editing: 1 Check that the MD is not record- protected.
Editing an MD 51 · P · P p p 0) 6666 6 3,4 5 8 16 MENU/NO CLEAR p MD 1 – 5 CURSOR N Labeling an MD — Name Function 3 Press NAME EDIT/CHARACTER. The text input screen appears, and the cursor flashes. If you display the track number in step 2, play starts automatically and you can input the track title while confirming the track.
52 Labeling an MD (continued) 4 Turn MULTI JOG to select “Disc” (when copying the disc title) or the track number with the title you want to copy, then press ENTER/YES.
Editing an MD 53 Erasing the titles To erase the disc title and all track titles at once 1 Press MENU/NO so that “Edit Menu” appears. 2 Turn MULTI JOG until “Name ?”appears, then press ENTER/YES. 3 Turn MULTI JOG until “Nm All Ers ?” appears, then press ENTER/YES.
54 Erasing recordings (continued) 1 Press FUNCTION repeatedly to switch the function to MD. 2 Press MD D.SKIP on the remote repeatedly until the button of the desired MD lights green. If the MD appears in the slot, press 6 to load the MD (to the recording/playing unit).
Editing an MD 55 2 Press MD D.SKIP on the remote repeatedly until the button of the desired MD lights green. If the MD appears in the slot, press 6 to load the MD (to the recording/playing unit). 3 Press MENU/NO so that “Edit Menu” appears. 4 Turn MULTI JOG until “All Erase ?” appears, then press ENTER/YES.
56 5 Turn MULTI JOG until the desired track number appears, then press ENTER/YES. “–Rehearsal–” and “Point A ok?” appear alternately while the deck plays the selected track from the beginning. 6 While monitoring the sound, turn MULTI JOG to select the starting point of the portion to be erased (point A).
Editing an MD 57 Moving r ecorded tr acks — Move Function 4 Turn MULTI JOG until “Move ?” appears, then press ENTER/YES. 5 Turn MULTI JOG until the desired track number appears, then press ENTER/YES. 6 Turn MULTI JOG until the new track position appears.
58 · P · P p p 0) 66666 3 4,5,7 4,5,6 1 MD 1 – 5 0 / ) p Dividing recor ded tr acks — Divide Function 3 Press MENU/NO so that “Edit Menu” appears. 4 Turn MULTI JOG until “Divide ?” appears, then press ENTER/YES. 5 Turn MULTI JOG until the desired track number appears, then press ENTER/YES.
Editing an MD 59 1 2 1 2 3 4 3 AB C D AB CD Notes • When you divide a labeled track (see page 51), only the first of the two tracks retains the track title. Example: • You cannot divide the start or end of a track. If you specify the start or end of a track as the position to be divided, “Impossible” appears.
60 1 Press FUNCTION repeatedly to switch the function to MD. 2 Press MD D.SKIP on the remote repeatedly until the button of the desired MD lights green. If the MD appears in the slot, press 6 to load the MD (to the recording/playing unit). 3 Press MENU/NO so that “Edit Menu” appears.
Editing an MD 61 Undoing the last edit — Undo Function 3 Press ENTER/YES. One of the following messages appears, depending on the last edit. Editing done: Message: Labeling an MD or a track Copying .
62 Getting a mor e powerful sound You can listen to music with stronger bass tones or more powerful sound. Reinforcing the bass / Press DBFB*. “DBFB” appears in the display, and the bass is reinforced. * DBFB: Dynamic Bass Feedback For a powerful sound (GROOVE) / Press GROOVE.
63 Timer To change the spectrum analyzer display Press UPPER DISPLAY and LOWER DISPLAY on the system at the same time. (You cannot use the remote.) Each time you press the buttons, the display changes.
64 W aking up to music — Daily Timer You can wake up to music at a preset time. Make sure you have set the clock first (see page 8). 1 Prepare the sound source you want to play. • CD: Place the desired CD in the tray. If “SHUFFLE” or “PROGRAM” appears in the display, press PLAY MODE so that these indications disappear.
65 Timer ˜ ˜ ˜ ˜ ˜ To cancel the timer operation 1 Press TIMER SELECT, then turn MULTI JOG until “TIMER OFF ?” appears. 2 Press ENTER/YES. “DAILY” disappears from the display and the timer operation is canceled.
66 · P · P p p 0) 66666 17 1 3,5,7,9, 11,13,15 4,6,8, 10, 11,14,16 TIMER SELECT CURSOR N / n 3 Timer-r ecording r adio pr ogr ams 3 Press CLOCK/TIMER SET, then turn MULTI JOG until “REC SET ?” appears. 4 Press ENTER/YES. 5 Turn MULTI JOG to select one of “REC 1 ?” to “REC 5 ?”.
67 Timer 8 Press ENTER/YES. If you select “ONCE” or “WEEKLY”, the day indication starts flashing. If you select “DAILY”, the hour indication starts flashing. 9 Turn MULTI JOG to select the desired day. If you select “DAILY” in step 7, proceed to step 11.
68 REC 1 REC 2 REC 2 REC 2 REC 1 REC 1 Last 30 seconds Last 30 seconds To change the setting Start over from step 1. If you made a mistake, press CURSOR N and return to the point you want to change during steps 9 to 15, then change the setting.
69 Timer · P · P p p 0) 66666 1 7 4,5 3,6 9 2 CURSOR N UPPER DISPLAY CLEAR MENU/NO 2 Press TUNING MODE repeatedly until “PRESET” appears. 3 Turn MULTI JOG until the preset number of the station you want to label appears. 4 Press NAME EDIT/CHARACTER.
70 Labeling the preset stations (continued) 7 Press CURSOR n to enter the character. The cursor shifts rightward and waits for the input of the next character. 8 Repeat steps 5 to 7 to complete the name. If you made a mistake Press CURSOR N or n until the character you want to change flashes, then repeat steps 5 to 7.
71 Timer Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers a convenient RDS feature, locating a station by program type (PTY).
72 6 Press ENTER/YES. The system starts searching for the preset RDS stations. When the tuner receives a program, the preset station number flashes. 7 Press ENTER/YES when the tuner receives the desired program. To select another station from the desired program type In step 7, turn MULTI JOG again and press ENTER/YES.
73 Timer S. Classical Performances of major orchestras, chamber music, opera, etc. Other Music Music, such as rhythm and blues, and reggae. Weather Weather information. Finance Stock market reports and trading, etc. Children ( ’ s programs) Programs for the young.
74 Using Optional Equipment List of compatible components This section describes components that can be connected to the system; these components are listed below. Be sure to confirm the jacks and the FUNCTION. For details on the connections and operation, refer to the descriptions on the following pages.
75 Using Optional Equipment — MD WALKMAN 0) 66666 Connecting an MD WALKMAN 1 If the power is on, press 1/u (power) to turn off this system. 2 Turn off the MD WALKMAN’s Mega Bass function. Set the DIGITAL MEGA BASS switch to “0”, or press DIGITAL MEGA BASS so that “BASS” disappears from the display.
76 · P · P p p 0) 66666 14 p NAME EDIT/ CHARACTER ENTER/YES MENU/NO MULTI JOG 66 6 Use the remote for the MD WALKMAN to set the volume to the highest setting. 7 Disconnect the remote for the MD WALKMAN and connect the MD WALKMAN to the system. Connect the end with the loop to the MD WALKMAN.
77 Using Optional Equipment — MD WALKMAN Copying track titles When you record from a portable MiniDisc player, you can copy the title of the current track. Models: MZ-E45 (Hong Kong only), E44, E35, E30, E25, EP11 1 While recording, press NAME EDIT/ CHARACTER.
78 ” Other A/V Components Connecting a tape deck, VCR, etc. Connecting the optional TC-PX100 tape deck CD Synchro Recording and Timer Recording are possible when the TAPE CONTROL jacks are connected. Refer to the operating instructions included with the TC-PX100 tape deck for details.
79 Using Optional Equipment — MD WALKMAN Connecting a TV, VCR, DVD player, etc. Connect the component to the DVD/VIDEO IN jacks on the system. Tip The system does not support Dolby Pro Logic, so you cannot listen to material played back on a DVD player with Dolby Digital or Dolby Pro Logic.
80 Recording the sound of connected A/V components 1 Insert a recordable MD. 2 Press FUNCTION repeatedly to select “TAPE” or “VIDEO”. Sound source FUNCTION Tape deck TAPE TV VIDEO VCR VIDEO DVD player DVD* * To select “DVD”, press FUNCTION repeatedly to select “VIDEO” then press MENU/NO and press ENTER/YES.
81 Using Optional Equipment — MD WALKMAN IEC standard socket connector (not supplied) 75-ohm coaxial cable (not supplied) Ground wire (not supplied) AM FM 75 Ω C O A X IA L Insulated wire (not sup.
82 Additional Information Pr ecautions On transportation • Make sure you remove all discs, and turn off the system. If you move the system with the discs inserted, you may be unable to remove the discs. • Before you move the system, turn off the system and make sure all operations have finished.
83 Additional Information Notes on MDs • Do not open the shutter to expose the MD. Close the shutter immediately if the shutter opens. • If you try to force the shutter open, the disc may be damaged. If the shutter opens, close it immediately without touching the disc inside.
84 The sound may drop-out while searching the edited tracks Tracks created through editing may exhibit sound dropout during searching because high-speed playback takes time to search for the position on the disc when the tracks are scattered on the disc.
85 Additional Information T r oubleshooting The volume is too low. m Turn VOLUME clockwise. The headphones are connected. m Unplug the headphones. The speakers are not connected properly.
86 Troubleshooting (continued) Symptom Cause and countermeasure Sound comes from one channel or unbalanced left and right volume. There is severe hum or noise. “0:00” (for the European model) or “12:00 AM” (for other models) flashes in the display.
87 Additional Information Symptom Cause and countermeasure The remote does not function. CD Symptom Cause and countermeasure The disc tray does not close. The disc does not eject. Play does not start. The sound skips. The remote is not pointing in the direction of the system’s sensor.
88 Troubleshooting (continued) Symptom Cause and countermeasure The sound skips. Play does not start from the first track. “—OVER—” is displayed. A CD button lights even though there is no CD loaded. Tuner (Radio) Symptom Cause and countermeasure Severe hum or noise/stations cannot be received.
89 Additional Information Symptom Cause and countermeasure Severe hum or noise/stations cannot be received. A stereo FM program cannot be received in stereo. Cyclical static noise is heard while recording on an MD. Part of the antenna is folded, tied or rolled up.
90 Symptom Cause and countermeasure The sound skips. Play does not start from the first track. Recording or editing was done, but the TOC is not updated. Play does not finish even when Repeat Play is not selected. Or the MD deck goes back to the first track during Shuffle or Program Play.
91 Additional Information Symptom Cause and countermeasure The sound from an MD you recorded is too low (or too high). You cannot edit. Optional components Symptom Cause and countermeasure There is no sound. The sound from the DVD player is too loud or distorted.
92 Symptom Cause and countermeasure The volume from the MD WALKMAN is low. The sound from the MD WALKMAN drops out/is distorted, or noise occurs. If the system still does not operate properly after pe.
93 Additional Information Code/Message Cause and countermeasure C11/Protected C12/Cannot Copy C13/REC Error C13/Read Error C14/Toc Error C41/Cannot Copy The inserted disc is protected against erasure. m Eject the disc, then slide the tab closed to cover the hole (see page 35).
94 One of the following messages may appear or flash in the display during operation. MD Message Cause and countermeasure Auto Cut Blank Disc Cannot Edit Cannot REC Complete!! Disc Full Impossible Sil.
95 Additional Information Message Cause and countermeasure MD PULL DISC MD RE-INSERT! Name Full !! New Track No Disc No Name No Track —OVER— Premastered Program Clear! Push STOP ! –Rehearsal– Release There is already an MD loaded in the MD recording/playing unit, but there are 5 MDs in the slots so the loaded MD cannot be removed.
96 Message Cause and countermeasure Smart Space Text Protect TOC Reading TOC writing Track End Tuner (Radio) Message Cause and countermeasure OFF TIME NG ! CD Message Cause and countermeasure Check an.
97 Additional Information continued Specifications Main Unit (HCD-MD555) Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 70 – 20,000 Hz; rated 25 watts per channel minimum RMS power, with no more than 0.
98 Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range 87.5 – 108.0 MHz (50 kHz step) Antenna FM lead antenna Antenna terminals 75 ohms unbalanced Intermediate frequency 10.
99 Additional Information Index E Erase Function 53 Erasing a portion of a track (A-B Erase) 55 a single track (Tr Erase) 53 all tracks on an MD (All Erase) 54 F Features of the DHC-MD555 12 G GROOVE .
Sony Corporation Printed in Japan R Radio stations presetting 10 tuning in 21 RDS (Radio Data System) 71 Recording a CD 16, 37 a radio program 23 from an MD WALKMAN 76 from A/V components 80 level syn.
Een belangrijk punt na aankoop van elk apparaat Sony DHC-MD555 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony DHC-MD555 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony DHC-MD555 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony DHC-MD555 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony DHC-MD555 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony DHC-MD555 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony DHC-MD555 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony DHC-MD555 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
