Gebruiksaanwijzing /service van het product DVS-9000-C van de fabrikant Sony
Ga naar pagina of 42
SWITCHER PROCESSOR PACK DVS-9000-C DVS9000SF-C INST ALLA TION MANUAL 1st Edition HK-PSU04 BKDS-9160 BKDS-9161 BKDS-9162 BKDS-9210 MKS-8110SD MKS-8111SD DVS-9000 DVS-9000SF PRODUCTION SWITCHER PROCESSO.
DVS-9000/9000SF ! W ARNING This manual is intended for qualified service personnel only . T o reduce the risk of electric shock, fire or injury , do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
DVS-9000/9000SF Attention-when the product is installed in Rack: 1. Prevention against overloading of branch circuit When this product is installed in a rack and is supplied power from an outlet on the rack, please make sure that the rack does not overload the supply circuit.
.
1 DVS-9000/9000SF Table of Contents Manual Structure Purpose of this manual .............................................................................................. 3 Related manuals ..............................................................
.
3 DVS-9000/9000SF Purpose of this manual This manual is the installation manual of Switcher Processor Pack DVS-9000-C/ DVS9000SF-C and their optional boards and units. This manual is intended for use by trained system and service engineers, and describes the information on installing the DVS-9000-C/DVS9000SF-C system.
.
1-1 DVS-9000/9000SF Section 1 Installation 1-1. Operating Environment Operating guaranteed temperature : + 5 d C to + 40 d C Performance guaranteed temperature : + 10 d C to + 35 d C Operating humidity : 10 % to 90 % (relative humidity) Storage temperature : _ 20 d C to + 60 d C Mass (when all options are installed) : DVS-9000 : Approx.
1-2 DVS-9000/9000SF 1-3. Installation Space (External dimensions) Unit : mm 1-3. Installation Space (External dimensions) 1-3-1. DVS-9000 35 7 520 375 61 370 144.
1-3 DVS-9000/9000SF 1-3. Installation Space (External dimensions) 375 61 380 144.5 115.5 115.5 17.5 482 37.2 101.6 176(4U) 161 465 440 35 7 520 1-3-2. DVS-9000SF Unit : mm.
1-4 DVS-9000/9000SF 1-4. Installing the Options The DVS-9000-C/DVS9000SF-C is shipped from the factory with the necessary option boards (refer to the following table) already installed in accordance with the specified system configuration. The following options are available for the DVS-9000/ 9000SF.
1-5 DVS-9000/9000SF Installation Procedure 1. Turn off the main power of the DVS-9000/9000SF and disconnect the AC power cord from the wall outlet. 2. Loosen the four screws (with drop-safe) and remove the front panel to the arrow. 3. Remove the screws (DVS-9000: 6 screws, DVS-9000SF: 4 screws) and remove the Extract PWB stopper assembly.
1-6 DVS-9000/9000SF 1-4-2. Installing the Connector Board 1. Remove the two screws and remove the blank panel. m . To install the connector board into the slot in which the other board is installed already, loosen the two fixing screws and remove the connector board that is installed already.
1-7 DVS-9000/9000SF 2. Insert the connector board horizontally level and secure it with the two fixing screws. DVS-9000 option Name of option Name of board Slot on the rear side BKDS-9160 CNO-19 board.
1-8 DVS-9000/9000SF 1-5. Rack Mounting The DVS-9000/9000SF is mounted in the 19-inch standard rack. To mount the DVS-9000/9000SF in the rack, use the specified rack mount kit and follow the procedure described below.
1-9 DVS-9000/9000SF 1-5. Rack Mounting 2. Rack Mounting Procedure This section describes the rack mounting procedure using the RMM-10 rack mount kit. n Tighten the screws to the following torque. Tightening torque : 120 x 10 _ 2 N . m {12.2 kgf . cm} 1.
1-10 DVS-9000/9000SF 1-5. Rack Mounting 6. Align the groove of the rack tool at the side of the equipment with the rail, and slide the equipment to the rear. n The rack tools are hooked on the rails as shown below. 7. Fix the rack angle in the rack using the specified screws.
1-11 DVS-9000/9000SF 1-6. Matching Connectors 1-6. Matching Connectors Use the following connectors, cables or equivalents when connecting cables to the unit.
1-12 DVS-9000/9000SF 1-7. Input/Output Signals of Connectors _ EXT VIEW _ 1 5 6 9 1 13 14 25 _ EXT VIEW _ + V GPI OUT x B GPI OUT x A GPI OUT 5-8 GPI OUT COM x : 1-4 <Relay> <Open collector output> ( * 3) ( * 4) 1-7. Input/Output Signals of Connectors The input/output signals of the connectors at the rear panel are as follows.
1-13 DVS-9000/9000SF 1-7. Input/Output Signals of Connectors _ EXT VIEW _ 1 5 6 9 1 8 _ EXT VIEW _ REMOTE 1 to 4 : RS-422A (D-sub 9-pin, Female) <DEVICE> ( * 5) from External Devices Pin No.
1-14 DVS-9000/9000SF 1-8. Checks on Completion of Installation 1 2 3 4 5 AB C D E D101 D102 D103 D104 TP101 TP102 TP103 TP104 ND101 ND102 ND501 ND502 ND701 ND702 D309 D310 D601 D602 D801 D802 D501 D50.
1-15 DVS-9000/9000SF 1-8. Checks on Completion of Installation D802 (A-2) : COM2 100 status LED COM CPU-2 Ethernet communication speed status indication. Lit : 100 Mb/s Not lit : 10 Mb/s D901 (A-2) : REF EXT status LED REF IN signal presence/absence status indication.
1-16 DVS-9000/9000SF 1-8. Checks on Completion of Installation CN503 (A-5) : TERMINAL pin This pin is connected to the COM CPU-1 control terminal and used during maintenance. Conforms to RS-232C. CN703 (A-5) : TERMINAL pin This pin is connected to the COM CPU-2 control terminal and used during maintenance.
1-17 DVS-9000/9000SF 1-8. Checks on Completion of Installation DI3 (F-3), DI6 (F-3), DI7 (F-3), DI8 (F-4) (green) : STATUS1 to STATUS4 LED Used for maintenance purpose.
1-18 DVS-9000/9000SF 1-8. Checks on Completion of Installation A side/Component side 2. MIX-46 board (DVS-9000/9000SF/BKDS-9210) TP302 D308 TP301 D304 TP101 D104 TP102 D108 TP201 D204 E321 1 2 3 4 5 6.
1-19 DVS-9000/9000SF 1-8. Checks on Completion of Installation <Switch> S301 (A-8) : MIX-CPU reset switch Pressing this switch initializes the CPU on the MIX-46 board. S2031 (A-9) : Monitor reset switch The reset switch that is used to reset the monitor during maintenance through the terminal.
1-20 DVS-9000/9000SF 1-8. Checks on Completion of Installation <LED> D103, D107 (A-4) : + + + + + 1.8 V-1 and 2 + 1.8 V-1 and 2 power supply status indication. Lit when the + 1.8 V-1 and 2 power are supplied. D113 (A-3) : + + + + + 3.3 V + 3.3 V power supply status indication.
1-21 DVS-9000/9000SF S400 (A-9) : MONITOR reset switch The reset switch that is used to reset the monitor during maintenance through the terminal. <Slit land> SL700, SL701 (A-5), SL702 (A-6) :JTAG Chain switching They are the slit lands that are used to switch the JTAG chains.
1-22 DVS-9000/9000SF 1-8. Checks on Completion of Installation <LED> D103, D107 (A-4) : + + + + + 1.8 V-1 and 2 + 1.8 V-1 and 2 power supply status indication. Lit when the + 1.8 V-1 and 2 power are supplied. D203 (A-4) : + + + + + 3.3 V + 3.3 V power supply status indication.
1-23 DVS-9000/9000SF S800 (A-10) : MONITOR reset switch The reset switch that is used to reset the monitor during maintenance through the terminal. <Slit land> SL1700 (C-6), SL1701 (C-6), SL1702 (C-6) : JTAG Chain switching They are the slit lands that are used to switch the JTAG chains.
1-24 DVS-9000/9000SF 5. XPT-21 board (DVS-9000/9000SF) E9 E7 AB C D E F G H J K L M N P R 1 2 3 4 5 6 7 8 9 10 11 12 13 D3401 S3401 CN3001 CN3301 E3 TP3001 E4 TP3005 TP3002 TP3004 TP3003 E1 E2 E8 TP1 .
1-25 DVS-9000/9000SF CN3303 (A-6) : DEBUG terminal Not used. This terminal conforms to RS-232C. CN3901 (A-11) : IEEE1394 terminal Not used. This terminal conforms to IEEE1394.
1-26 DVS-9000/9000SF * a : Connect each LAN (CTRL, DATA) to the separate Ethernet switches respectively. However, a single Ethernet switch can be used for connecting each LAN. * b : Terminate the system with the 75 Z terminators supplied. The 75 Z terminators are supplied with the equipment.
1-27 DVS-9000/9000SF 1-9. System Connection * a : For the AC power cord, refer to Section “1-2-2. Recommended Power Cord”. * b : Terminate the system with the 75 Z terminators supplied with this unit. 2. Flow of Video Signals The figure below shows the flow of video signals in a DVS-9000 system.
.
2-1 DVS-9000/9000SF Section 2 Service Overview 2-1. Troubleshooting The main power of the DVS-9000 cannot be turned on. (Indicator does not light green.) The monitor picture is not displayed correctly. The main power of the D VS-9000 cannot be turned on.
2-2 DVS-9000/9000SF 2. Fan DVS-9000 series is air-cooled by the fans (on both sides). If dust has accumulated in the intake of the fan, air is prevented from flowing smoothly and this may result in a temperature rise inside the machine. This may have an adverse effect on performance and the life of the machine.
2-3 DVS-9000/9000SF 2-3. About the Data Backup Capacitor A large capacitor is installed on the CA-44 board in order to backup the memory storing the setup and other data in the DVS-9000 series. Leave the main power of the DVS-9000 series turned on for one hour or longer in order to charge the large capaci- tor.
.
DVS-9000/9000SF The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manu.
Printed in Japan Sony Corporation 2002. 7 16 B&P Company ©2002 DVS-9000-C DVS9000SF-C (SY) E 3-620-567-01.
Een belangrijk punt na aankoop van elk apparaat Sony DVS-9000-C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony DVS-9000-C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony DVS-9000-C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony DVS-9000-C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony DVS-9000-C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony DVS-9000-C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony DVS-9000-C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony DVS-9000-C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
