Gebruiksaanwijzing /service van het product PCS-G70/G70P van de fabrikant Sony
Ga naar pagina of 17
2004 Sony Corporation FR 3-863-239- 11 (1) Operating Instructions for Web Control Function Video Comm unication System PCS-G70/G70P.
2 Intr oduction This document introduces the Web Control Function which is used to operate the PCS-G70/G70P over a LAN. The Web Control Function helps you control the PCS-G70/G70P, or change its setup configuration, using a Web browser installed on your PC, such as Internet Explorer or Netscape Navigator.
3 1. Open the W eb page Enter the IP address assigned to the PCS-G70/G70P in the address line of your browser. The format of an address is: http://XXX.XXX.XXX.XXX/ For instance, if the IP address is “192.47.100.117”, enter “http://192.47.100.117/” in the address line.
4 3. Select a tool By clicking a tool button on the top part of the page, you can jump to the corresponding tool page. A brief introduction of each tool is presented below.
5 4. How to use “Contr oller” To control the PCS-G70/G70P from the on-screen controller When you click the [Controller] button, the on-screen control panel appears. By clicking the buttons on this control panel, you can control the PCS-G70/G70P, sending still images, operating the camera, registering preset camera settings, and so on.
6 To control the PCS-G70/G70P from the on-screen Remote Commander When you click Commander on the left part of the screen, the Remote Commander screen appears.
7 5. How to use “Dial/Disconnect” By clicking the [Dial/Disconnect] button, you can jump to the “Dial/Disconnect” page. • To connect: 1 Enter the telephone number(s) of a remote party into the box(es): A1( to C2) (When using a LAN, enter an IP address or a DNS name.
8 6. How to use “Phone Book” By clicking the [Phone Book] button, you can jump to the “Phone Book list” page. • To connect: 1 Click s Dial next to the index title that you are dialing. Then, the message, “Now dialing...” will appear. 2 After the connection is made, you will see the message, “Connect OK.
9 “Phone Book-Edit” page • To edit the communication attribute (only when “super” or “sonypcs” has been entered as the user name): 1 Click s Edit... next to the index title whose communication attribute you want to edit or modify on the list page.
10 “Phone Book-New” page • To register a new point (only when “super” or “sonypcs” has been entered as the user name): 1 Click s New on the list page. The “Phone Book-New” page will appear. 2 Enter an index title into the Index box and telephone numbers into box(es) A1 (to C2).
11 7. How to use “Setup” Click the [Setup] button, and you will jump to the “Dial Setup” page. Click Dial, Answer, Communication, Audio, Video, General, LAN on the left part of the screen, according to what you are setting up.
12 To display the “Send Message” page Click Message on the left side of the page. The “Send Message” page will appear. Enter the message you want to send into the Message box and click the [Send] button to send the message to the PCS-PG70/PG70P.
13 To reset the system Click Reset on the left part of the page. The “Reset” page will appear (only when “sonypcs” has been entered as the user name). 1 Click on the desired item. A dialog box will appear. 2 Click the [OK] button. • “System Restart” Resets the PCS-PG70/PG70P system.
14 8. How to use “Inf o” • Click the [Info] button, and the “Information” page will appear. • Click the [Documents] button to download the Operating Instructions (PDF format).
15 To display the Cause Code list By clicking Cause on the left part of the page, you can jump to the “Cause Code” page, and see the Cause Code list.
16 To display the Call Log By clicking Call Log on the left part of the page, you can jump to the “Call Log” page (only when “sonypcs” has been entered as the user name).
17 9. Monitor a meeting o ver the W eb Click the [Monitor] button to show the monitoring window. Note When Web Monitor is set to Off in the Administrator Setup menu, the “Monitor” page cannot be used.
Een belangrijk punt na aankoop van elk apparaat Sony PCS-G70/G70P (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony PCS-G70/G70P heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony PCS-G70/G70P vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony PCS-G70/G70P leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony PCS-G70/G70P krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony PCS-G70/G70P bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony PCS-G70/G70P kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony PCS-G70/G70P . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
