Gebruiksaanwijzing /service van het product RM-AV3000 Operating Instructions (primary manual) van de fabrikant Sony
Ga naar pagina of 104
3-242-704- 14 (1) Integrated Remote Commander Operating Instructions © 2002 Sony Corporation RM-A V3000.
2 WARNING T o prevent fir e or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . WARNING Y ou are cautioned that any changes or modifications not expressly appr oved in this manual could void your authority to operate this equipment.
3 Featur es The RM-A V3000 Remote Commander provides centralized contr ol of all your A V components from a single remote commander and saves the trouble of operating differ ent A V components with differ ent remote control devices. The following are its main featur es.
4 T able of Contents Getting Started Location and Function of Controls ....................................................................................... 6 Installing the Batteries .................................................................
5 Selecting a Channel with a Single K ey Press — Channel Macro Function ......................... 58 Setting the Timer .............................................................................................................. .. 61 Setting the new timer program .
6 Location and Function of Contr ols 1 Clock Display key (page 8) Displays the clock, the transmission mark, the battery mark and the timer mark. 2 Mode Display key (page 8, 13, 20, 30, 32, 40) Displays the status of the selected mode. Function of the key changes according to the selected mode.
7 qf EXIT button (page 89) Used to exit the setting menu. qg MENU button (page 88) Calls up the menu display of the buttons or keys that have menu function. qh OK button and Cursor Control buttons (page 9, 64, 88) qj SYSTEM CONTROL buttons (page 31) Y ou can program up to 32 consecutive key operations to each of the three SYSTEM CONTROL buttons .
8 When to replace the batteries Batteries for remote contr ol operation and backlight (four size AA (R6) batteries) Under normal conditions, alkaline batteries will last up to 5 months. If the Commander does not operate properly , alkaline batteries might be worn out and E is displayed on the LCD touch panel.
9 2 Set the day of the week. Select the day of the week by pressing the or button. Selected day of the week flashes. SU : Sunday MO : Monday TU : T uesday WE : W ednesday TH : Thursday FR : Friday SA : Saturday Then press the button. The day of the week is set.
10 Adjusting the clock after setting the clock 1 While pressing COMMANDER OFF , pr ess MUTING. “SET” appears on the Mode Display key . 2 Press the Mode Display key (SET) twice.
11 Each time the SET key is pressed, the Label keys change as follows. “CLOCK” appears and flashes on one of the Label keys on the display . 3 Press the CLOCK key . The Commander enters clock setting mode. “CLOCK” appears on the Mode Display key , and the current time flashes.
12 Basic Operations Setting the Code for Pr eset Audio and V isual Components The Commander is preset at the factory to operate Sony brand A V components (see the table below). If you are using the Commander with a factory-set Sony components, skip the following procedur es.
13 Example: T o set up a Philips’ TV 1 See the tables in the supplied “ Component Code Numbers, ” and find the four-digit code number for the desired component. If more than one code number is listed, use the number that is listed first. For example, to set up a Philips ’ TV , you would use the code number 8056.
14 5 Press the four -digit component code number followed by the ENTER key on the touch-key display . Example: T o enter “ 8056 ” Input “ 8, ” “ 0, ” “ 5, ” “ 6, ” and press “ ENTER ” . If you press the CLEAR key during inputting the digits Input digits are canceled.
15 4 If you have succeeded, check that the Commander is operating the other functions of your component, such as channel and volume control. See page 18 for details. 5 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off.
16 Setting the Code for Preset Audio and Visual Components (continued) “ SET ” appears on the Mode Display key . 2 Press the PRESET key . “ PRESET ” appears on the Mode Display key . 3 Select the desired component by pressing the Component Select button or the Label key .
17 4 Press CHANNEL + or CHANNEL – to search component code numbers in the same category (in this case, code numbers which begin with “ 8 ” ). Press CHANNEL + to go to the next code number . Press CHANNEL – to go back to the previous code number .
18 Example: T o play a DVD player 1 Press the corr esponding Component Select button or the Label key for the component you have set up. T o display and change the Label keys, press the Mode Display key repeatedly . The Commander comes on and the keys for operating the selected component are displayed.
19 Using Non-Pr eset Remote Contr ol Oper ations — Learning Function T o operate non-preset components or functions, use the following “ learning ” procedur e to “ teach ” any of the programmable buttons and keys to operate the functions of another remote control.
20 Using Non-Preset Remote Contr ol Operations — Learning Function (continued) Remote control for your component RM-A V3000 about 2 – 4 inches (5 – 10 cm) away 3 Press the LEARN key .
21 Continued T o change the Label keys, press the Mode Display key (in this case, VCR) repeatedly . Each time you press the VCR key , the display of the Label keys changes as follows. Note on the flashing display The keys or buttons that are alr eady preset for that component flash twice while those that are not preset flash once.
22 Using Non-Preset Remote Contr ol Operations — Learning Function (continued) Notes • If you do not perform learning steps within two minutes, learning mode ends. • If you do not perform Step 6 within 10 seconds after Step 5, the display turns back to the display in Step 4.
23 T o change the function display of a key Y ou can select the most suitable function display among all the displays the key has, and set it to the key . 1 After Step 4 (page 20), while pressing the Mode Display key (in this case, VCR), press the key you want to teach repeatedly .
24 3 Decide the digit or the character you input by pressing the button or another number key . The cursor moves to the right. When the button is pressed, the cursor moves to the left. Y ou can input a digit or character to the place where the cursor flashes.
25 Changing or erasing the function of a taught key or button T o change the learned function, clear it first and perform learning again. T o clear the learned function of a single key or button 1 After Step 4 (page 20), while pressing the DEL key , press the key or button you want to erase.
26 Using Non-Preset Remote Contr ol Operations — Learning Function (continued) T o clear all signals lear ned for a specific component 1 While pressing COMMANDER OFF , pr ess MUTING. “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once “ RESET ” appears and flashes on one of the Label keys on the display .
27 5 Press the Component Select button or the Label key of which preset settings you want to erase. The component name is displayed on the left Label key . 6 Press the YES key . During erasing, “ c c ” stays lit. When erasing finishes, “ OK ” is displayed with a beep sound.
28 3 Press the YES key . “ REALL Y? ” stays lit. “ YES ” and “ NO ” flash. If you press the NO key The display returns to Step 1. 4 Press the YES key .
29 Component Select button TV STB VCR DVD CD AMP Controls the volume of TV TV TV TV amplifier amplifier Advanced Features Controlling the V olume of Visual Components Connected to an Audio System The .
30 Controlling the V olume of Visual Components Connected to an Audio System (continued) 1 While pressing COMMANDER OFF , pr ess MUTING. “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) twice. Each time the SET key is pressed, the Label keys changes as in Step 2 on page 13.
31 6 Hold COMMANDER OFF pressed for mor e than 2 seconds to turn the Commander off. If you keep COMMANDER OFF pressed for less than 2 seconds, the display returns to the pr evious setting mode.
32 COMMANDER OFF MUTING 2 Press the SYSTEM key . “ SYSTEM ” appears on the Mode Display key . 3 Select the system number by pressing the SYSTEM CONTROL button (in this case, SYSTEM CONTROL 2) or the Label key . T o change label keys, press the MORE button repeatedly until you obtain the desired system number .
33 TV Continued COMMANDER OFF 6 Repeat Steps 4 and 5 and program the buttons and keys for the series of operations. In this example, press the following buttons and keys. 7 When you have programmed all the keys and buttons, press COMMANDER OFF . W ith a beep sound, a series of operating commands is register ed and displayed in order .
34 Executing a Series of Commands — System Control Functions (continued) Notes • If you interrupt the procedur e at any point for over two minutes, the setting mode ends and the series of commands will be programmed to that point.
35 Continued T o clear programmed commands for a specific SYSTEM CONTROL button or corresponding Label key 1 While pressing COMMANDER OFF , pr ess MUTING. “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once to display “ RESET ” on one of the Label keys on the display .
36 Executing a Series of Commands — System Control Functions (continued) YES T o erase all programmed commands for all SYSTEM CONTROL buttons and corresponding Label keys 1 Follow Steps 1 - 3 in the left. 2 While pressing the DEL key , pr ess the SYSTEM key .
37 Continued COMMANDER OFF If you press the NO key The display returns to Step 1. 5 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous setting mode.
38 Executing a Series of Commands — System Control Functions (continued) Progr amming a series of commands for the Component Select buttons or the Label keys As with the SYSTEM CONTROL buttons or the Label keys, you can also program a series of operating commands for the Component Select buttons (up to 32 steps).
39 T o clear a System Control function programmed for Component Select buttons and Label keys 1 Follow Steps 1-4 on page 26. 2 While pressing the DEL key , pr ess the Component Select button (or Label key) of the System Control function you want to clear .
40 3 Press the MODE key . “ MODE ” appears on the Mode Display key . 4 Press the SYSDELA Y key . “ SYSDELA Y ” is displayed on the Mode Display key .
41 8 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous setting mode. T o display and change the Label keys for timer program numbers Press the TIMER button r epeatedly .
42 T o change the component macro e xecuting time 1 Follow the procedur e of Steps 1 - 5 on page 40. 2 Press the TIME key . The current component macr o executing time stays lit, and (+) and (-) flash. 3 Press the (+) or (-) key to change the component macro executing time.
43 Example: T o program the TV button 1 While pressing COMMANDER OFF , pr ess MUTING. “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) twice to display “ MODE ” on one of the Label keys on the display . 3 Press the MODE key .
44 Adding an Extra Function to the Component Select Buttons (continued) 4 Press the PowerON key . “ PowerON ” appears on the Mode Display key . The display of the component names (preset by Sony) for which you can program the Power -on signal flashes.
45 Adding a command that is requir ed when selecting a component In addition to the original function of selecting the operating keys and buttons of the desired component, the Component Select button or the Label key can have another remote contr ol signal by “ learning.
46 3 While pressing the Mode Display key (LEARN), press the Component Select button or the Label key you want to “ teach, ” and release both keys. (T o change the Label keys, press the OTHER button repeatedly .) The selected component name appears on the Mode Display key , and “ LEARN ” begins to flash.
47 T o clear the lear ned function of the Component Select button 1 Follow Steps 2 and 3 on page 20 in “ Learning Function. ” 2 While pressing the DEL key , press the Component Select button which you want to clear .
48 Assigning Other Components to the Component Select Buttons or the Label Keys (continued) Example: T o copy the settings of the DVD button to the VCR button 1 While pressing COMMANDER OFF , pr ess MUTING. “ SET ” appears on the Mode Display key .
49 “ COPY ” appears on the Mode Display key . In this case, “ DVD c c VCR ” flashes on the Label keys and moving finishes with a beep sound. And the keys for VCR appears. 6 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off.
50 Programming a Fr equently Used Key Operation for SYSTEM CONTROL Buttons or Label Keys (continued) LEARN 3 Press the LEARN key . “ LEARN ” appears on the Mode Display key . If a signal has been learned on that button, the display stays lit. If you want to program on that button, clear the signal first (page 51).
51 5 Press and hold down the button of the remote contr ol until you hear a beep. (If you release the button befor e you hear a beep, the signal may not be learned correctly .) While receiving the signal, “ LEARN ” stays lit. If “ NG ” flashes on the display and “ NG ” sound is heard five times Learning did not succeed.
52 Notes on learning the signals of an air -conditioner About seasonal adjustments If you change the settings of the air- conditioner for the season, you have to program the r emote control signals of the new settings on the Commander .
53 Another RM-A V3000 4 Press the MODE key . “ MODE ” appears on the Mode Display key . 5 Press the “ TRANSFER ” key . “ TRANSFER ” appears on the Mode Display key . 6 Press the X key . X : T ransfer data x : Receive data 1 Place the RM-A V3000 head to head with another RM-A V3000.
54 COMPO 7 Press the ALL key . ALL: All data of the Commander COMPO: Data of a Component Select button or a Label key “ ALL X ” appears on the Mode Display key , and “ ALL ” appears on the left Label key . 8 Confirm that the receiving Commander is ready for data.
55 5 Press the “ ENTER ” key . During transferring the data, “ c c c c ” flashes. When the data has been successfully transferred, “ END ” appears on the right Label key . Note If “ NG ” appears while sending the data, go back to Step 6 and continue the operation or press COMMANDER OFF to stop the operation.
56 ALL T ransferring Data between Commanders (continued) “ ALL x ” appears on the Mode Display key , and “ ALL ” appears on the left Label key . 4 Press the ENTER key . During receiving the data, “ cccc cccc ” flashes. When all the data has been successfully transferred, “ ALL ” appears on the right Label key .
57 COMMANDER OFF Continued 5 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous setting mode.
58 Selecting a Channel with a Single K ey Pr ess — Channel Macro Function Y ou can program the Channel Macr o function of the components of which the first digit of the four-digit pr eset component code number is 3 (STB), 8 (TV) or 9 (CABLE).
59 COMMANDER OFF MUTING CHMACRO TV Continued Example: T o program TV channel 123 for the VIDEO4 key 1 While pressing COMMANDER OFF , pr ess MUTING. “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once to display “ CHMACRO ” on one of the Label keys.
60 Note Y ou cannot program the Channel Macro function for a macro key that has “ learned ” a signal. T ry again with another macro key , or clear the “ learned ” signal (page 25) from the button and program the Channel Macr o function on it. T o clear the Channel Macro function 1 While pressing COMMANDER OFF , press MUTING.
61 Setting the Timer Up to 12 timer setting programs can be set on this commander . Y ou can program the timer setting of the day of the week, the hour , the minute and the contents of the program (T imer Macro). Y ou can set each program of the timer to be executed or not.
62 Setting the Timer (continued) The selected program number appears on the Mode Display key . (If the pressed Label key has character contents you input, the character contents appear on the Mode Display key .) “ ON/OFF , ” “ TEST , ” “ SETUP , ” and “ COPY ” flash on the Label keys.
63 6 Press the TIME key . Set the timer-on hour by pr essing the or button. Then press the button so that the minute flashes. (Y ou can switch the mode between the hour setting and the minute setting by pressing the or button.) Set the minute by pressing the or button.
64 Setting the Timer (continued) COMMANDER OFF 11 When you have programmed a series of T imer Macr o setting, press COMMANDER OFF . W ith a beep sound, a series of T imer Macro setting is r egistered and displayed in order .
65 T o change the program name on the Mode Display key After Step 3, hold the Mode Display key pressed for mor e than 2 seconds. The Commander enter the Label Inputting mode. Then follow the same procedur e as that for changing the name of the Label key in Steps 2 - 5 on page 24.
66 Setting the Timer (continued) 6 Press the key of which contents you want to change. DA Y : See Step 5 on page 62. TIME: See Step 6 on page 63. MACRO: The display turns as below . 7 Press the OK key . W ith a beep sound, the T imer Macro setting is cleared, and the Commander enters the T imer Macro setting mode (Step 7 on page 63).
67 T o check the execution of the timer program or set the timer program to the standby mode 1 Follow Steps 1 - 3 on page 61, 62. 2 Press the TEST key or the ON/ OFF key . TEST : Y ou can check the timer program setting by transmitting the T imer Macro signals.
68 4 Keep COMMANDER OFF pressed for mor e than 2 seconds to turn the Commander off. T o reset the standby mode to off, follow Steps 1 - 3 again. Notes • If the TEST key or the ON/OFF key is pressed when the timer pr ogram is not set, the “ NG ” sound is heard twice and “ NG ” flashes.
69 T o clear timer settings programmed for a specific PROG (1-12) Label key 1 While pressing COMMANDER OFF , pr ess MUTING. 2 Press the Mode Display key (SET) once to display “ RESET ” on one of the Label keys on the display . 3 Press the RESET key .
70 COMMANDER OFF T o clear all timer settings programmed for all PROG (1 - 12) Label keys 1 Proceed Steps 1 - 3 on page 69. 2 While pressing the DEL key , press the TIMER key . 3 Press the YES key . “ REALL Y? ” stays lit, and “ YES ” and “ NO ” flash.
71 1 While pressing the Clock Display key , press COMMANDER OFF . W ith a beep sound, “ LOCK ” appears on the Mode Display key , and every LCD display disappears except the clock and “ LOCK.
72 2 While pressing the LOCK key , press the Label key on which the setting mode you want to lock is displayed. (T o change the Label keys, press the SET key .) The selected setting mode is locked and the display of the locked setting mode on the Label key stays lit.
73 Setting the Automatic- Off Time of the Display Window The Commander is preset at the factory to turn off the LCD display window automatically if you do not operate for more than 10 minutes. (Then all the display contents are turned of f.) T o change this setting, perform the following procedur e.
74 Setting the Automatic-Off Time of the Display Window (continued) COMMANDER OFF Adjusting the Backlight of the Display Window The Commander is preset at the factory to brighten backlight, and to switch off the backlight automatically if you do not operate for more than 10 seconds.
75 2 Press the Mode Display key (SET) twice to display “ LIGHT ” on one of the Label keys. 3 Press the LIGHT key . “ LIGHT ” appears on the Mode Display key . 4 Press the OFF TIME key . The display becomes in the setting mode of the Automatic-Off time of the backlight.
76 Adjusting the Backlight of the Display Window (continued) COMMANDER OFF 7 Press the BRIGHT or DIM key to select the brightness. Then press COMMANDER OFF to decide the brightness. The display returns to Step 3. BRIGHT : bright DIM: dark 8 Press the ON MODE key .
77 Setting the K ey-T ouch Beep The Commander is preset at the factory to turn on the key-touch confirmation beep. Y ou can turn on or off the key- touch confirmation beep. 1 While pressing COMMANDER OFF , press MUTING. “ SET ” appears on the Mode Display key .
78 4 Press the Mode Display key (MODE) once to display “ CONTRAST ” on one of the Label keys. 5 Press the CONTRAST key . “ CONTRAST ” appears on the Mode Display key . “ **** ” appears on each Label key . The DVD display appears on the other part of the display window .
79 Changing the Names of the Label K eys or the Component Names on the Mode Display K ey Y ou can change the display of the Component names on the Mode Display key or on the Label keys, the function displays of components, the SYSTEM4 - SYSTEM15 and PROG1 - PROG12 on the Label keys to the most suitable name using up to 8 characters or digits.
80 Changing the Names of the Label Keys or the Component Names on the Mode Display Key (continued) 4 Select the sort of Labels by pressing the COMPO, SYSTEM or TIMER key . COMPO: Displays component names. T o change the Label keys, press the OTHER button.
81 COMMANDER OFF Erasing All the Settings Y ou can erase all the settings to reset the Commander to its factory settings. 1 While pressing COMMANDER OFF , press MUTING. “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once to display “ RESET ” on one of the Label keys on the display .
82 6 Press the YES key . During erasing, “ ALL c c c c c c c c ” stays lit. When all the settings on the Commander are erased, “ OK ” is displayed with a beep sound. The Commander is reset to its factory settings. If you press the NO key The display returns to Step 3.
83 Specifications Operating distance Approx. 32.8 ft. (10 meters) (varies depending on components of differ ent manufacturers) Power requir ements Remote control and backlight: Four size AA (R6) batteries Battery life Approx. 5 months (varies depending on frequency of use) Dimensions Approx.
84 T roubleshooting If you have problems setting up or using the Remote Commander , first check the batteries (page 7), then check the items below . Remedy • Go closer to the component. The maximum operating distance is approximately 32.8 ft. (10 m).
85 Symptom “ NG ” flashes five times. “ NG ” flashes twice. Remedy • Leaning has not succeeded. After checking the follows, try learning procedure again (page 19). - Change the distance between remote commanders. - See “ For accurate learning ” (page 25).
86 T roubleshooting (continued) Symptom “ NG ” appears during learning. “ NG ” flashes if you try to copy the settings of the Component Select button or the Label key to another Component Select button or Label key. A system control program does not function correctly.
87 For the customers in the U.S.A. Customer Support Information After you have read thr ough this manual, if you still cannot get the Remote Commander to work properly , call the Sony Customer Support Helpline at 1-800-822-2217. Symptom The display of the Commander turns off by itself.
88 KEY DISPLAY POWER 1 – 9, 0, ENTER INPUT DISPLAY SLEEP MAIN/SUB ANT/SW WIDE MENU OK PIP ON/OFF PIP CH+/ – PIP INPUT PIP MOVE PIP STILL PIP SWAP TV FUNCTION To turn the power on/off To change the.
89 KEY DISPLAY POWER 1 – 9, 0, ENTER INPUT DISPLAY S.INDEX INFO FAVORITE GUIDE ANT/SW * 1 m * 1 N * 1 M * 1 REC * 1 x * 1 X MENU OK STB (Digital Satellite) FUNCTION To turn the power on/off To chang.
90 T able of Preset Functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENTER INPUT DISPLAY FAVORITE * 1 m * 1 N * 1 M * 1 REC * 1 x * 1 X MENU OK EXIT CHANNEL +/ – RECALL OPTION STB2 (Digital Cable.
91 KEY DISPLAY POWER 1 – 9, 0, ENTER INPUT DISPLAY ANT/SW MAIN/SUB MENU OK m N M REC x X Z CHANNEL +/ – COUNTER Q.TIMER T SEARCH SEARCH t COMMERCL VCR, VCR2, VCR3 FUNCTION To turn the power on/off.
92 T able of Preset Functions (continued) KEY DISPLAY POWER 1 – 9, 0 +10 ENTER AUDIO DISPLAY ANGLE CLEAR RETURN (RECALL) TITLE SUB TITLE A/B MENU OK m N M x X > (CH+) .
93 KEY DISPLAY POWER 1 – 9, 0 +10 ENTER D.SKIP DISPLAY CLEAR m N M x X Z > (CH+) . (CH – ) CONTINUE SHUFFLE PROGRAM REPEAT CD FUNCTION To turn the power on/off To select the track number (0 selects track 10) To select track numbers above 10, see the descriptions on the +10 button below.
94 T able of Preset Functions (continued) KEY DISPLAY SHIFT BAND EXIT CHANNEL +/ – VOLUME +/ – MUTING S.FIELD GENRE MODE T.TONE CENTER+ CENTER- REAR+ REAR- SUB WOOFER+ SUB WOOFER- T D.
95 KEY DISPLAY POWER 1 – 9, 0 +10 ENTER D.SKIP DISPLAY CLEAR m N M REC x X Z > (CH+) . (CH – ) MD FUNCTION To turn the power on/off To select the track number (0 selects track 10) To select track numbers above 10, see the descriptions on the +10 button below.
96 T able of Preset Functions (continued) KEY DISPLAY POWER 1 – 9, 0 ENTER m n N M REC x X DISPLAY A/B REW AMS FF AMS FADER T APE A, T APE B FUNCTION To turn the power on/off To select the track number To enter the setting To rewind To reverse To play To fast-forward To enter the record standby mode, press REC.
97 KEY DISPLAY POWER 1 – 9, 0, ENTER CHANNEL +/ – RECALL CABLE (Cable box) FUNCTION To turn the power on/off To change the channel For example, to change to channel 5, press 0 and 5 (or , press 5 .
98 T able of Preset Functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENTER INPUT DISPLAY CLEAR GUIDE INFO * 3 THUMBS+ * 3 THUMBS – m N M REC x X MENU D V R ( Digital v ideo recor der) FUNCTION To.
99 KEY DISPLAY POWER 1 – 9, 0 +10 ENTER D.SKIP DISPLAY CLEAR m N M REC x X Z > (CH+) . (CH – ) DA T FUNCTION To turn the power on/off To select the track number (0 selects track 10) To select track numbers above 10, see the descriptions on the +10 button below.
100 KEY DISPLAY OFF 1 2 3 4 5 6 7 8 9 10 11 12 SCENE13 SCENE14 SCENE15 SCENE16 ALL ON ALL OFF ON OFF CHANNEL + CHANNEL – RECALL LIGHTING Spacer Raise Lower Toggle Spacer System OFF SCENE1 SCENE2 SCE.
101 Quick Reference of Oper ations To Enter the setting mode Enter the learning mode Enter the setting mode of the System Control function Enter the timer program setting mode Input the character cont.
102 To Set the interval between operation steps of the System Control Set the component macro executing time Adjust the contrast of the LCD display window Turn the key-touch beep on/off Set the Automa.
103 Full Display.
104 Index A Automatic-Off of the backlight 74 of the display window 73 B Backlight adjusting 74 Automatic-Off 74 Batteries 7 C, D Changing component name on the Mode display key 24 function display of.
Een belangrijk punt na aankoop van elk apparaat Sony RM-AV3000 Operating Instructions (primary manual) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony RM-AV3000 Operating Instructions (primary manual) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony RM-AV3000 Operating Instructions (primary manual) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony RM-AV3000 Operating Instructions (primary manual) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony RM-AV3000 Operating Instructions (primary manual) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony RM-AV3000 Operating Instructions (primary manual) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony RM-AV3000 Operating Instructions (primary manual) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony RM-AV3000 Operating Instructions (primary manual) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
