Gebruiksaanwijzing /service van het product SDT-S9000/BM van de fabrikant Sony
Ga naar pagina of 24
SDT -S9000/BM DDS Drive Unit 3-860-267- 12 (1) User’ s Guide.
Sony Corporation Printed in Japan 1997 SDT-S9000/BM DDS Drive Unit User's Guide.
2 Safety Regulations Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Information WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture.
3 NOTICE THIS NOTICE IS APPLICABLE FOR USA AND CANADA ONLY. If shipped to USA, use the UL LISTED power cord specified below for 220-240 V operation. If shipped to CANADA, use the CSA CERTIFIED power cord specified below for 220-240 V operation. DO NOT USE ANY OTHER POWER CORD Plug Cap Tandem blade with ground pin.
4 English T ab le of Contents How to Use this Guide ...................................................................... 5 Part 1 Introduction About DDS Drives ............................................................................. 6 Features .
5 How to Use this Guide This Guide describes the DDS Drive Unit SDT-S9000/BM , and how to take care of it. Please read it carefully before using the unit, and keep it handy for future reference. The Guide consists of four parts, plus the specifications.
6 Part 1. Introduction P ar t 1. Intr oduction About DDS Drives The SDT-S9000/BM is an external DDS drive unit that uses data cartridges conforming to the DDS-3 format and DDS-2 format.
7 Useable Cartridges Data cartridges used with the SDT-S9000/BM must be marked with the DDS-1, DDS-2 or DDS-3 logo. DDS-3 Logo DDS-2 Logo DDS-1 logo CAUTION: Be sure to use only the cartridges designed specifically for DDS (do not use DAT cartridges for music).
8 P ar t Names and Functions Front panel 1 2 3 4 5 6 7 POWER BUSY TAPE STATUS EJECT 1 DDS Data Cartridge Receptacle See page 15 for information on inserting and removing a DDS data cartridge. 2 EJECT Button Push to remove a data cartridge from the drive.
9 5 BUSY Indicator Lights when data is being transferred through the SCSI interface. This indicator also lights under the following conditions: Drive is reading or writing repeated blinking (same on-off normally: interval). 6 POWER Indicator Lights while the drive is on.
10 Rear Panel 1 2 3 4 5 SCSI CONNECTOR AC IN SCSI ID GND 1 AC IN Connector Connect the supplied power cable here. 2 GND (Ground) Terminal Connect the ground terminals of other devices to the unit's frame ground. 3 Rotary Selector Switch SCSI ID selector.
11 Part 2. Preparation After you confirm that you have all of the required accessories for your installation, connect the drive to the host computer, and select the SCSI ID with the rotary switch on the rear panel. Supplied Items When you first open the box, make sure it contains the following items.
12 Interconnections The SCSI bus allows connection of up to seven peripherals to the host computer. Use a SCSI cable with a full-pitch connector. Precautions • Switch off the host computer and peripherals before connecting the SCSI cable. • Make sure the SCSI connectors are pressed tightly together.
13 SCSI ID Setting The SCSI ID is set by the rotary switch on the rear panel. Press the + or - buttons to move the number up or down, respectively. As shipped from the factory, the SCSI ID is set to 0. Press the switch buttons, if necessary, to select the SCSI ID number you require.
14 SDT-S9000/BM Configuration Switch Settings for Unix * System Configuration Host Unix SW Setting PC-based WS SCO Unix Xenix Digital WS Sun WS Solaris 2.X Sun WS Sun OS 4.1.X IBM RS/6000 WS AIX IBM RS/6000 WS AIX HP WS HP-UX SGI WS IRIX * To be supported by the firmware ver.
15 Part 3. Operation P ar t 3. Operation This section describes how to use the DDS drive, and how to handle data cartridges. How to use the DDS Drive 1 Press the POWER switch on the front panel. The POWER indicator should light, and the STATUS, BUSY and TAPE indicators should blink as the self-test is performed.
16 Cartridge Removal Press the EJECT button. The cartridge ejects automatically. Caution Do not push the EJECT button while the BUSY indicator is blinking: to do so may destroy data on the tape.
17 Part 4. Care and Maintenance P ar t 4. Care and Maintenance T aking Care of the Drive Safety Considerations ■ Power • Be sure to use only 100-240 V AC. • Avoid plugging into the same outlet as high-current equipment like copiers or shredders.
18 ■ Abnormal occurrences If the drive behaves abnormally, or if it begins to smell or smoke, immediately unplug it from the wall outlet and contact your supplier for assistance.
19 Part 4. Care and Maintenance T aking Care of Car tridges Use Precautions • Avoid heavy vibration and dropping. • The shutter on the face of the cartridge is opened automatically when it is inserted into the drive. Do not open the shutter by hand, as touching the tape may damage it.
20 Head Cleaning To keep the DDS drive in top condition, clean the head as needed, using the proper head cleaning cartridge (sold separately). When the head needs cleaning, the STATUS indicator will blink. How to Clean 1 Insert the head cleaning cartridge (DG-5CL) into the DDS Data cartridge receptacle.
21 Appendix Specifications (SDT -S9000/BM) ■ Performance Storage Capacity 24 GB compressed (with 125 m DDS-3 tape) *1 12 GB un-compressed (with 125 m DDS-3 tape) Bit Error Rate less than 10 -15 Data Transfer Rate 1.18 MB/s uncompressed (TAPE) 2.36 to 4.
22 Appendix Thir d P ar ty Suppor t Contact (In the USA) Host Adapter Vendors Phone Numbers Adaptec 408-945-8600 ATTO 716-691-1999 Bus Logic 408-492-9090 DPT 407-830-5522 Future Domain 714-253-0400 Initio 408-988-1919 Qlogic 714-438-2200 Ultera Systems Inc.
23 Appendix Operating Systems Backup Software Vendors Phone Numbers SUN Unix Legato 415-812-6000 NovaStor 818-707-9900 Software Moguls 612-933-8790 Sun Soft 310-348-8649 Work Station Solutions 603-880.
Een belangrijk punt na aankoop van elk apparaat Sony SDT-S9000/BM (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Sony SDT-S9000/BM heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Sony SDT-S9000/BM vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Sony SDT-S9000/BM leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Sony SDT-S9000/BM krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Sony SDT-S9000/BM bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Sony SDT-S9000/BM kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Sony SDT-S9000/BM . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
