Gebruiksaanwijzing /service van het product D4RS van de fabrikant Speco Technologies
Ga naar pagina of 94
User Guide (V er . 2.4 ) Model: D4RS, D8R S, D16RS , D4WRS, D8WRS, D16W RS 4, 8, 16 Channel Digit al V ideo Recorder Abou t This User ’ s Guide Before operatin g the unit, please read this user ‟ s guide thoroughly and re tai n it for future re ference.
2 Cautio ns Explanation of Graphical Symbols W ARNING T o reduce a risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Changes or modifications not approved by the manufacture will void the warranty of the product. Using an incompatible battery may increase the risk of fire or explosion.
3 These Precauti ons must be Fol lo w ed for Safety Reasons W arning Do not use if the unit emit s smoke. Do not disassembl e the uni t. Do not place any heavy or sharp object s on the unit. Do not place on u nev en surface. Do not expose to shock or v ibrat ion.
4 Product Com ponent s Please make sure the follow ing component s are i ncluded as specified below . DVR Unit (D 4 W RS/D8 W RS/D 16 W RS or D4RS/D8RS /D16RS) Remote Control Battery1.
5 Specification s ITEM D4RS/D4WRS D8RS/D8WRS 16RS/D16WRS Video Input Channel, Input Level 4CH / 8CH / 16CH Composite , 1.0Vp-p, 75ohm Signal Format NTSC/PAL Video Loss Check Yes Output VGA 1 VGA (1024x768, 1280x1024) CVBS 1 BNC 1 BNC 1 BNC SPOT - 1 BNC 1 BNC Audio Input & Output 4 CH Line input & 1 CH Line output Audio Codec G.
6 USB Port 2 (Front 1, Rear 1) Backup USB Flash drive Video & Still Imag e Network Video & Still Imag e Huge Backup Yes (up to 24 hours) User I/F Menu Display GUI Input Method Remote control, .
7 T able of Content s 1. Main Features ............................................................................................................................. 10 2. Initial Boot up Pro cess .......................................................
8 5-3-7. Log List ..................................................................................................................................... 50 5-4. Play M ode ................................................................................
9 10 -2. App V iewer for Android Pho ne .................................................................................................... 86 APPEND IX: Network Co nnection - LAN ......................................................................
10 1. Main Features H.264 V ideo Compressi on Reliabl e File System 4 Channel Audio Recording Individu al Channel Operation Automatic V ideo Input, V ideo Loss, and HDD Error Dete ction Covert Camera O peration Provides Enhan ced Security .
11 2. In itial Boot up Proces s 2-1. Initial Boot up and Bas ic Tim e S et up 1. During the first boot up, the follow ing log o and message w ill be displayed. 2. After the system initializing is completed, select the langua ge and set date and time as specified below .
12 2-2 . Setting Daylight Saving T ime T o enable Day light Saving feature/NTP synchronization, ta ke the follow ing steps. 1. Enter the SETUP mode. The default Username is “ AD M IN ” and Password is “1 1 1 1”.
13 3. Select ON from th e DA YLIGHT SA VING dropdown menu. 2-3 . Setting NTP (Network Time Protocol) 1. SETUP > SY STEM > NTP SETUP > ON 2. Select the prope r TIME ZONE time.
14 AR Arkansas GMT- 6 GMT- 5 CA California GMT- 8 GMT- 7 CO Colorado GMT- 7 GMT- 6 CT Connecticut GMT- 5 GMT- 4 DC District of Colu m bia GMT- 5 GMT- 4 DE Delaware GMT- 5 GMT- 4 FL Florida GMT- 5 GMT-.
15 OH Ohio GMT- 5 GMT- 4 OK Oklahoma GMT- 6 GMT- 5 OR Oregon GMT- 8 GMT- 7 OR Oregon (E) GMT- 7 GMT- 6 PA Pennsylvan ia GMT- 5 GMT- 4 RI Rhode Island GMT- 5 GMT- 4 SC South Carolina GMT- 5 GMT- 4 SD S.
16 3. Name, Function and Connection 3-1. Front Panel D x x R S D x x W R S Figure 3. 1.1 . Front pan el T able 3. 1.1. Front LED and Port of DxxRS Name Description POWER LED light is on w hen power is applied to the sy stem. HDD LED light is on w hen t he system is recording vide o data.
17 D8RS/ D8 W RS D16RS/D16 W RS Figure 3. 2 .1 . Connector s ① VIDEO IN: V ideo input port. ② VIDEO OUT : D4RS: Sw itchable (Composi te Vi deo Output or S pot Monitor) D8RS, D16RS : CVBS1 – Composite V ideo Output / CVBS2 – S pot Monitor ③ VGA: VGA (Video G raphics Array ) output port.
18 3-3. Remote Control ① ID: T o set the remo te control ID. ② REC : T o st art and s top manual recording ③ 0~9: T o select channel (1,2,3,..) or to enter a DV R ID number o r use as nu mber key . ④ F/RE W : During playbac k – T o move the playback posi tion 60seconds bac k.
19 4. Se tting up th e DVR The follow ing sections det ail the ini tial setup o f the DVR . M enu screen wil l close if user input is not receiv ed in 5 minutes . 4-1. Setup – Main Live S creen T o enter t he setup menu, right click on the mouse and select setup fr om the submenu or press t h e setup button on the remo te control.
20 4-2. Setup – SYSTEM Mode In the SETUP menu, select the SYSTEM tab. Then, the SYS TEM menu is displayed as pictur ed below . Navigate through the menu items using t he mouse or the remote control and chan ge the val ue of the menu item. Figure 4.2.
21 DA TE DISPLA Y FORMA T Select the date display format using t he mouse or the control button on the r e mote control. Options are: MM/DD /YYYY , YYYY/MM/DD, DD/MM /YYYY , YYYY - MM -DD, MM - DD -YY.
22 PRIM ARY SNTP SER VER: Input the address of the primary NTP time-server . SECONDA R Y SNTP SE R VER: Input the address of the seconda ry NTP time-server . TIME ZONE: NT P synchronizes with GM T (Greenw ich Mean T ime) regardless o f geography , user must set their ow n time dif ference.
23 ID: Enter the approp r iate mail server ID . P ASSWORD: Enter the appropriate mail se r ver P ASS W ORD. MA IL FROM: T o se t the email address sen t to th e dest ination host. UNIT NA ME Name the DVR (e.g. Factory) This feature is to identify the na m e of the DVR under the same netw ork.
24 RESOLUT I ON Select D1, Half D1 or CIF using the mouse or the control button on the remote control . FRA ME RA TE Set the frame r a te for the specified channel. The sum of the frame rate values from each channel cannot exceed the maximum fr ame r a tes f o r a specific recordin g resolution.
25 4-3-1. Recording Sc hedules T o setup a recording sch edule, s elect SCH EDULE in the REC ORD menu . Navigate th rou gh the items using the mouse or the control button. Select CHANN EL > select NONE, CON TINUOUS or MO TION > HIGHL IGHT AREA T o copy a schedu le to a dif f erent channel, select the channel from the COPY SCHEDULE menu.
26 4-4. Setup – DEVICE Mode In the SETUP menu, select the DEVICE tab. T hen , the device menu is display ed as pictured below . Navigate through the menu items using the mouse or the control button on the remote control and change the value o f the menu item.
27 SENSIT IVITY Control the motion sen sitivity from 1 to 9. (9 – Highest sensi tivity , 1 – Lowest sensi tivity) KEY T ONE Enable/disabl e key tone. REMOTE CONTR OL ID Set the remote con trol ID. 1. Select ID. 2. Input the remote con trol ID number.
28 4-4-2. Keyboard Controller & PTZ Setup T o control the PTZ functions of the camera, connect the PTZ controller to t he RS-485 port on the back of the chassis w ith CA T5 (or equiv alent) cable. ① C onnect the RS-485 cables o f PTZ camera to the RS-485 port on the rear panel .
29 Note : Connect PTZ cameras that support RS-485 directly t o the RS - 485 port. If the camera is controlled through an RS-232C interface, use a n RS -232C t o RS -485 to RS- 232C si gnal converter .
30 4-4-4. Motion Zone Setup Select MOTION ZONE using the mouse or the control button on the remote control and select eithe r P AR T IAL ZONE or FULL ZONE u sing the mouse con trol. The default value is FULL ZONE . If FULL ZONE is selecte d, the motion zone grid screen is not display ed.
31 4-5. Setup – DISPLA Y Mode In the SETUP menu, select the DISPLA Y tab. Then, the DISPLA Y menu is display ed as pictured below . Navigate through the menu items using the mouse or the control button on the remote control and change the value o f the menu item.
32 VIDEO OUT PUT (VGA ) D4RS/D4WRS When VGA REOSLUTION is set at 1024 x 768, CVBS OUTPUT(Simulta neous Video Ou tput): ON SPOT OUTPU T : OFF When VGA RESOLUTION is set as 1280 x1024, CVBS OUTPUT(Simulta neous Video Ou tput): O FF SP OT OUTPUT : ON D8RS/D16RS /D8WRS/D16WRS CVBS1 : Composite V ideo Output CVBS2 : S pot-Out port 4-6.
33 T able 4. 6.1. Menu Items in NETWORK Setup Screen Item Description NETWORK TYPE DHCP: DVR wi ll automatically retr iev e an IP address from the network.
34 For example, i f you en ter the host na me as “ D4RS ”, then the address wi ll be: http://d4rs.ddns.specod dns.net Select NET W ORK>DDN S. The menu displ ays as below . Figure 4.6.3. NET WORK Setup Screen – DDNS T able 4. 6.2. DDN S Item Description ENABLE DDNS Enable/disable the Dynamic Domain Name Service.
35 4-7. Setup – USER M A N A GEMENT Mo de In the SETUP menu, select t he USER MAN AGEMENT tab. T hen, the USER MANAGEME NT menu is display ed as pictured below . Navigate through the menu items us ing the mouse or the control butto n on t he remote control and change the v alue of the menu item.
36 A DMIN, USER1, USER2, USER 3: Selected Chec kbox: The user can access the function. Blank Checkbox: The user can not acces s the fu nction. P ASSWORD SETUP Options are ADMIN, USER 1, USER2 and USER 3. Select USER P ASS W OR D using the mouse or the control bu tton on the remote control and press SEL button.
37 4-8. Setup – STORA GE Mode In the SETUP menu, select the ST ORAGE tab. Then, t he STORAGE menu is display ed as pictured below . Navigate through the menu items using the mouse or the control button on the remote control and change th e value of the menu ite m.
38 DISK INFO Hard drive in f ormation. Display s the follow ing in formation; RECORDING LIMIT Enable/disabl e recording limit. RECORDING LIMIT DA YS Set the recordin g limit da ys. (1 - 90 day s) If the RECORDING LIMIT DA YS are set to 1, the data will be overwritten afte r 24 hours.
39 4-9. Se tup - CONFIG Mode In the SETUP menu, select the CONFIG tab. Then, the configuration menu is display ed as pictured below . Navigate through the menu items using the mouse or the control button on the remote control and change the value o f the menu item.
40 LOAD DEF A U L T Press the button to reset the sy stem to the de fault settings . The follow ing settings such as Langu age , DVR ID , Secur ity User A uthentication, Securit y User P/W , Date format , DLS settings, Network settings, HDD overwrite, Limit recording , HDD serial number , an d HDD ERROR time w ill not be i ncluded.
41 4-9-1 . Firmware Upg rade 1. Create a new f older nam ed “upgrade” in t he USB flash driv e r oot dire ct ory . 2. Create sub- folde r for each model unde r “upgrade” folder and co py each fir mware. D4RS: “ main_D 4RS_speco_*.*.* _201 *** *” D8RS: “ main_D 8RS_speco_*.
42 Figure 4.9.3 Figure 4.9.4 NOTICE 1. If selecting REBOOT LA TER, t he upgraded softw ar e will not be applied un til the system reboots. 2. If selecting REBOOT NO W when the USB flash drive is plugged, t he following message will pop up. Remov e the USB flash drive and select OK.
43 5. Li v e, Search and Playback 5-1. Live View In the Live screen, video input s from the cameras are display ed as they are configured in the Display S etup screen. V arious On-Screen Display (OSD) symbols, which indicate the status of the DVR, are described in T able 5.
44 Indicates that a network cli ent is connected to the DVR . Indicates that se quencing mode is enabled. Displays the cu rrent date and time. RC: ALL Remote control ID display . If a remote ID is not set, the message “ALL” is display ed. Displays the a mount of r ecording on the hard disk from 0- 99 %.
45 T able 5.1.2 . Menu Items in Quick Operation Wi ndow Icon Description SETUP Setup button. Cl ick this button to go to a se tup menu. AUDIO Audio button. Click this button t o set an audio reception t ype ; (Channel 1 through 4, Audio Mute). SEARCH Search button.
46 5-1-1 . PTZ Control T able 5.1.3. Menu Ite ms in PTZ Co ntrol W indow Item Description INITIALIZE Initializ e the PTZ settings o f the selected camera P AN/TIL T Select P AN/TIL T usin g the ▲▼◀ and ▶ button , then press SEL . Adjust the t ilt (UP/D OWN)/pan (LEFT/RIGH T) position using the ▲ ▼◀ and ▶ buttons.
47 5-2 . Digit al Zoom in Li v e and Pla y back Screen RS series supports Di g it al Zoom feature during liv e and playback mode. 1. Double click the t arget c hannel.
48 5-3-1. Time Line Search The CALEND AR Search wi ndow is used to find t he stored video by using the time line ba r . Figure 5.3.2 . Calendar Screen Figure 5.3.3 . T ime- Line Search Screen When the Ti meline menu is selected , the user can see a calendar , which displays recorded dates with highlights.
49 5-3-2. Event Search The Event Search window is used to find stored v ideo. Figure 5.3.4. Ev ent Search Screen When the Even t menu is selected , the user can see a calendar , which has r eco rded data. Select a specific date and the event lo g will be displayed .
50 SPECIFIC TIME menu. Use the mouse or the control button on the remote control to change the date and time value and p ress the PLA Y button after setting. If there is no video data in the set date and time, No Data Exist message display s. 5-3-6. A rchive List The ARCH IVE Search w indow is used to f ind prev iously stored video or images .
51 5-4. Play Mode During play back of a rec orded event, the mode changes from S EARCH to PLA Y . W hile in PLA Y mode, you may return to the SEARC H screen by pressin g t he X button on the s tatus bar .
52 6. Back Up 6-1. Still Image Backup onto USB Flash Dri ve S till images can b e captured and archiv ed onto a USB flash drive or an external hard drive in live mode or while playing back recorded video. In the live mode, press t he BACKUP button to launch the archive function or select BACK UP menu on the screen using the mouse.
53 3. Select USB S TICK (Flash Driv e) to bac k up less than an hou r . Select USB HDD (Huge B ackup) to back up from 1 hour to 24 hou r s. 4. Once you select the channel and duration, the system will start to a rchive the data to the USB f lash drive.
54 7. The following shows the image to complete the backup. Select lose to return to the previous screen . 6-3. T ransferring Still Images or V ideo from the ARCHIVE List The stored dat a in the ha rd drive c an be found in the ARCHIVE list in the SEA RCH window .
55 Figure 6.3.1. A rchive Search Screen 6-4. Playback of Backup V ideo A VI format: A VI format video can be played back by W indow Med ia Player ™ or other media player that is comp atible w ith A VI f o rmat vide o. NSF f or mat: NSF format video can be played back using the player that the DVR copies on USB flash drive w ith video.
56 7. Network Access Using the Multi-Sites Netw ork V iew er 7-1. Overview The S pecoT ech Mul ti Client is a multiple site moni toring client softw are with; video, audio, and alarm si gnals from the DVRs over networks. T he S pecoT ech Mul ti Client does not limit the number of DVR units to register .
57 7-3. Installation of the P rogram 1. Insert the prov ided CD in the CD drive and double - click “ S pecoT ech M ulti Client (XXXX) .exe ” 2. Select a destinati on folder and click “Next”. 3. Select the pro gram folder and click “Next”. 4.
58 7-4. Live Window When install ation is compl eted, double click t he “ S pecoT ech Multi Client ” icon on your desktop to start the program. 7-4-1. Main User I nt erface 7-4-2. Control Buttons Button Description LOCAL PLA YBACK Click this icon to run a playback window to search and play videos that are recorded in the local PC.
59 SITE MA NAGEMEN T THUMB NAIL REFRE SH: Click this icon to refresh and renew thumbnail image of the connected si tes . SITE ADDI TION: Click thi s icon to open „Site Addition‟ w indow . SITE DELETE: Click this icon to delete site from the index window , after disconne ct a site.
60 7-5. Search and Playback Window 7-5-1. Main User Interface Y ou can access to searc h window by clicking the search icon (Local Playback / Remote Playback) on the upper right of the Liv e Window .
61 CONNECT Click this icon to connect the sel ected site/sites . DISCONNEC T Click this icon to disconnect the sel ected site/sites. SETUP Click this icon to setup con f iguration o f S pecoT ech Mul ti Client. CAPTURE Click this icon to capture a still image.
62 7-6. Setup of Speco T ech Multi Clie nt Click the setup icon to setup the confi guration of UM S Multi Client softw are. The SETUP window is di splayed as below . 7-6-1. General Security Option: Set a p assword for security opti ons. Select security opti ons and set a p assw ord.
63 7-6-2. Event Event log can be archiv ed and searched . Event Log: Speci f y the l ocation to save ev ent lo gs and select event to archi ve. Event Search : Ev ent log can be searched from the selected time .
64 7-6-3. Record Record Setup: Y ou can set the recording conditions as the following; Alw ays, Event, or Auto record. And you can also select ta rget DVR/DVRs and channe l/channels. W hen you set the recording condi tion to event, you can set ev ent for motion or alarm wi th duration.
65 7-6-4. Displa y Y ou can select the OSD (On Screen Displ ay) to be displ ay ed. 7-6-5. A bout “About” provides netw ork client version informa tion.
66 7-7. Remote S etup The menu settin g s for th e DVR unit can be set over netw ork. Put the cursor of t he mouse on the channel, which is connected to the site and right clic k on the mouse to open the submen u. Then the follow ing window i s displayed as below .
67 7-7-1. S y stem Select Sy stem to set system and time settin g s. 1. Date Display Format : YYYY/MM/DD, MM /DD/YYYY , DD/MM/YYYY , Y YYY - MM - DD, MM - DD -YYYY , DD - MM -YYYY 2. Client A ccess: Enable/Disable remote access through netw ork clien t softw are.
68 7-7-2. Record Select RECORD tab to s et the recording conditions. These settin gs apply to the speci f ied chann el only . 1. Recording Setup - Resolution : Sets the res olution for the recordings. The set value appl ies to an individual channel. - Frame Rate : Sets the recording ra te.
69 7-7-3. Device Select Device to set S pot Out, Enable/Disab le CVB S Out, motion zon e. 1. Motion: Setup the motion detection area an d the sens itivity . - SITE: Select the chan nel - MO TI O N ZON E: FULL Zone or P A RTI A L Zone - Motion Sensitivity : 1~9 (High sensiti vity lev el) 2.
70 7-7-4. Displa y Select the DISPLA Y tab to set the DISPLA Y condition s. These settin gs apply to al l channels. 1. OSD : Sets w hether to display or not date and time as w ell as channel nu mber on the screen . 2. OSD Contrast : Adjust the charac t er con t rast on the screen .
71 7-7-5. Network 1. Network T y pe - ST A TIC : The address se tting mode is manual . Input IP , Ga teway , Subnet M ask, and DNS server IP . - DHCP : The address setting mode is automatic . Addresses and other information do not need to be set. 2. DDNS : Set whether to u se DDNS service or not.
72 7-7-6. Storage Select Storage t o configure cont inued recording settings by overwriting the hard disk and the storage period for the recordi ng dat a. 1. Overwrite : T o continue recording by overwriting when the ha r d disk becomes full, check the checkbox.
73 7-8. Operation 7-8-1. A ddition, Delete, and M odify of DVR Sites 7-8-1-1. A d dition of Sites 1. Click SITE ADDITION button. And then the fol lowing w indow will be displayed as bel ow . o Site Name: Inpu t a name tha t properly describes a site. o IP A ddress: Input I P address (Public IP address o f a r ou ter t hat DVR is connected.
74 7-8-1-3. Modify of Sites 1. Select the site /sites to modi f y from the directory window . 2. Click NET FIND ER button. And then the following w indow will be display ed as below . 3. Click MODIFY button. And then the modified in form ation is displayed as below .
75 7-8-2. Connect a nd Disconnect 7-8-2-1. Connect 1. Select site/sites to con nect from the directory wi ndow . 2. Click CONNECT button, and then site /sites display s/ display as c onnec ted. 7-8-2-2. Disconnect 1. Select site/sites to dis connect from the director y window .
76 7-8-3. Still-image Capture During Li v e 1. Double-clic k a channel to capture from the displ ay screen. (Otherw ise all channels w ill be captured.). 2. Click CAPTURE butto n. And then a Cap ture window will be display ed as below . 3. Set Save Path , File Name, and Fi le Forma t.
77 7-8-4. Recording Vid e o on Local PC During Live 1. Click SETUP button. And then a setup window will be display ed as below . 2. Select Record and set the v alues. 3. Select Dis k and set th e values. 4. Click RECORD ON button. And the color of b utton is changed .
78 7-8-5. Local Pla y bac k and Remote Play b ack 7-8-5-1. Play back of Recorded Video on a Local PC 1. Click LOCAL PLA YBAC K. And then Playba ck W indow will be displayed over the Live Window . 2. Select site/ sites to connect from the dire ctory w indow .
79 7-8-5-2. Play back of Recorded Video on Remote DVR 1. Click REMOTE PLA YBACK. And then Playback Window will be display ed over the Liv e Window . 2. Select the site to conne ct from the direc t ory wi ndow . 3. Click CONNECT . And then Green bar display s on Search calendar and timeline scale window .
80 7-8-6. A VI Backup during P lay back Y ou can back up the recorded v ideos in A VI format during pl ayback. 1. Double-clic k the tar get channel to backup . 2. Select the be ginning time by using the search cal endar and timeline scale bar . 3. Click MARK IN button on the timeline scale to select the beginning poi nt of the backup.
81 6. Y ou can also set the b eg inning time and en ding time on thi s window . After selecting a channel for back up, click the OK but ton. The backup w ill begin.
82 8 . Net w ork A ccess Using the W eb -Browser Vie w er The DVR provides a live r emote monitoring feature by web -browser viewer . (NOTE: W eb-Brow er is only available for Inte rnet Expl orer) 1. Check the IP address of the DVR from SETUP >SYSTEM >DESCRIPTION>IP ADDRESS or 2.
83 Site Name: Inpu t a nam e that properly descri bes a site. IP A ddress: Input I P address (Public IP address of a router that DVR is connected.) or Domai n name Port Number: Default Port Nu mber is “5445”. ID: Input ID o f DVR. De fault ID is “admin”.
84 9. Network Access U sing the Smart Phone Vie w er 9- 1. App Vie w er for iP hone 1. Enter the Apple App S t ore. 2. Search “ S peco View er ” in the App S tore. 3. Install the “ S peco V iewer ” app. 4. Open the inst alled “ S peco Vi ewer ” App 5.
85 7. Select the saved site from “ M y Site List ” 8. Select a channel (s) to view . 9. After selec ting a channel, the app w ill display the c hannel (s).
86 10 -2. App Viewer for Android Phone 1. En ter the Android Market. 2. Search “ S peco View er ” in the Android M arket and instal l the “ S peco Vi ewer ” app.
87 5. Input the “ Site Information ” and select CONFIRM to save the “ Site In formation ” 6. Select the saved site from “ M y Devi ce ” for network conne ction. 7. The app wil l display the liv e streaming vide o. Notice Da ta Usage applied without W i-Fi connection.
88 A PPENDIX: Network Connec tio n - L AN 1. Install the netw ork client software from the supplied CD . 2. Check the IP addres s from SETUP > SYS TEM > DESCRIPTION or SE T U P>NET W ORK of DVR.
89 4. Input Site Na me, Site Address (IP address), Port Number, and Password on the connec t window. Site Name: Inpu t a nam e that properly descri bes a site. IP A ddress: Input IP address Port Number: Default Port Nu mber is “5445”. ID: Input ID o f DVR.
90 A PPENDIX: Network Connec tio n – Inter net and DDNS Dynamic Domai n Name S ystem (DDNS) al lows a domain name to be con st antly synchronized wi th a dynamic IP add ress. A current dynami c IP addre ss is be ing associated w i th a static do m ain na m e.
91 3. W he n a manual host na m e is completed, Go to SETUP>NET W ORK>DDNS >SUBMIT/UPDA T E and select ON to submit the settin g s on the SPECO DD NS. 4. W he n DDNS setting is d one, clic k the APPLY but ton. Otherwi se DDNS setting wi ll not be applied.
92 8. Port forward the netw ork POR T (Default: 5445) a nd WEB POR T (Default: 80) o f the private IP Address of the DVR on the networ k router. 6. Run the network client so f tware. 7. Input Site Na me, Site Address (IP address) , Port No., and Password on the connect w indow.
93 8. And select the OK button. Then , press button after chec king the le f t check box ..
94 A PPENDIX: E-S A T A CONNECTION Please re ad the following instructions before using the E-S A T A port. Failure to do so may cause serious damage to the recorded v id eo. SPECO is not responsible for dat a loss caused b y imp roper usage. Use ONL Y a new HDD or a HDD that is p r e-formatted on a PC .
Een belangrijk punt na aankoop van elk apparaat Speco Technologies D4RS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Speco Technologies D4RS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Speco Technologies D4RS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Speco Technologies D4RS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Speco Technologies D4RS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Speco Technologies D4RS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Speco Technologies D4RS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Speco Technologies D4RS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
