Gebruiksaanwijzing /service van het product 150 M3 MCU van de fabrikant SpectraLink
Ga naar pagina of 63
Installation and Operation Link Wireless Telephone System Link 150 M3 MCU Part Number: 72 - 0075 - 01 Issue C - W.
SpectraLink Cor poration Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page ii NOTICE SpectraLink Corporation has prepared this document for use by SpectraLink personnel and clients.
SpectraLink Cor poration Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page iii Note concerning the Master Control Unit: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
SpectraLink Cor poration Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page iv UL Information This symbol on the nameplate means the pro duct is listed by Underwriter’s Laboratories, Inc. It is designed and manufactured to meet rigid U.
SpectraLink Cor poration Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page v FCC Inform ation The Master Control Unit Complies with Part 68, FCC Rules FCC Registration Numbers: Link 150: IYGUSA - 33400 - PX - E Ringer Equivalence: Link 150 Model 3: 0.
SpectraLink Cor poration Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page vi Industry Canada (IC) Notice Notice: The Industry Canada (IC) label identifies certified equipment.
SpectraLink Cor poration Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page vii Warranty Support Program World - class support for your Wireless Telephone System Service .
SpectraLink Cor poration Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page viii Customer Responsibilities 1. Maintain the installation site and provide the necessary utility services for use of the Product in accordance with SpectraLink’s applica ble published specifications, see installation guide.
SpectraLink Cor poration Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page ix Cleaning Tips for Wireless Telephones Wireless Telephones may occasio nally need to be cleaned to maintain appearance.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page x Table of Conte nts 1. ABOUT THIS DOCUMENT 1 1.1 Questions? 1 1.2 Icons and Conventions 1 1.3 Installation Overview 1 2. LINK WIRELESS T ELEPHONE SYSTEM OVER VIEW 3 2.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page xi 7. SITE CERTIFICATION 29 8. SYSTEM ADMINISTRATIO N 30 8.1 Troubleshoot Error Code s 30 8.2 Troubleshoot Phone Features 30 8.3 Status LED Codes 31 8.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 1 1. About This Document This document explains installation and operation of SpectraLink’s Link Wireless Telephone System (WTS), using the Link 150 Model 3 (M3) Master Control Unit (MCU).
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 2 This table lists the installation steps and the person usually responsible for each step.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 3 2. Link Wi reless Telephone System Overview Review this section if you are unfamiliar with the features and operation of the Link Wireless Telephone System.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 4 The MCU supports four Base Stations and up t o 16 Wireless Telephones. Up to four Link 150 M3 MCUs can be linked together for extended coverage area.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 5 2.2 The Front Panel of the Link 150 M3 MCU The MCU's front panel contains the connections to the telephone system, switches to control system administration, and status LEDs.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 6 3. Site Preparation 3.1 Req uired Materials The following equipment must be provided by the customer. 1. Outlet Strip – Recommended for installations with more than one MCU.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 7 4. Run Cable for System 4.1 Run Cables to Base Station Locations The Base Station locations should be designated on the building floor plans provided to the installer.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 8 4.2 Pull Cable Pull the cable from the MCU location (usually in the telephone equipment room) to the Base Station locations designated on the floo r plans.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 9 When wiring the 8 - pin connector, use the following table as a guide. 8 - pin modular connector MCU Pin Function Polarity 1 Data 1 Any 2 Data 2 Any 3 Power 3 + 4 Power 2 - 5 Power 2 + 6 Power 3 - 7 Po wer 1 - 8 Power 1 + 4.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 10 Based on the number and type of interfaces in the system, determine the number of 25 - pair cables required to conn ect line ports and Base Stations to the demarcation blocks.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 11 Two Wire Analog or Digital Interface The wiring diagram below shows the connections required for a two - wire analog or digital interface.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 12 Four Wire Digital Interface The wiring diagram below shows the connections required for a four - wire interface . Each MCU of this typ e requires two demarcation blocks which will be wired as indicated.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 13 4.5 Install Demarc Blocks The demarcation blocks used to connect the telephone system and Base Stations to the MCU should be installed on a typical telephone facility backboard.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 14 4.7 Connect Cables from Base Stations and Phone Lines to Demarc Blocks Two - pair twisted cable from Base Stations installed throughout the facility converge at the demarc block or backboard.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 15 Two Wire Analog or Digital Demarc Block The demarc block for the two - wire analog or digital interface should be wired as follows.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 16 Four Wire Digital Demarc Block The four wire digital interface (future release) requires two demarc blocks, one to Connector A a nd one to Connector B on the MCU.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 17 4 - Wire Connector B.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 18 5. Install Link Wireless Telephone System 5.1 Survey Site Check the site to be sure pre - installation work has been completed correctly. This includes: • Location chosen for the MCU is adequate, and power is available.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 19 • Link Wireless Telephone s – The correct number of Wireless Telephones for this installation. • Battery Chargers – SpectraLink Wireless Telephones require a battery charging system, usually one per Wireless Telephone.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 20 Connect Multi - Unit Systems Use the followi ng procedure to connect multiple MCUs. 1. Mount the MCUs side by side. 2. Connect the IPC cable from the OUT Port of the first unit to the IN Port of the adjacent unit.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 21 Use only the provided Class II AC Adapter with output 24VDC, 1A. ! ! For installations with more than one MCU, use an outlet strip with a built in power switch.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 22 Switch Interface Line LEDs MCU Type Notes Analog 1 SCA The SCA will only support Analog Comd.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 23 5.4 Install Base Stations Be sure the Base Station is positioned clear of anything that might damage it.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 24 Mount Base Stations On Finished Ceilings If your site does not have a dropped tile ceiling, .
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 25 5.5 Install Outdoor Base Stations Outdoor Base Stations are equipped with a protective enclosure, designed to be mounted to a wall or pole. After the enclosure is mounted, the Base Station is inserted in the enclosure and connected.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 26 6. Connect and Register Wireless Telephones 6.1 Set Up Diagnostic Modem Each MCU has an internal modem feature that allows SpectraLink technicians to dial into the system for troubleshooting and maintenance.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 27 To register a Wireless Telephone to your system do the following: 1. Be sure all unregistered Wireless Telephones are powered off and that there is a Base Station plugged in and wi thin range of the Wireless Telephones to be registered.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 28 mainly on. 3. Press the DEL/ENTER button. The line indicator LED for the selected line will be off with a short on flash . 4. Register the new Wireless Telephone or return the mode switch to the NORM position.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 29 7. Site Certification The installer should not leave the site before contacting SpectraLink to perform remote install verification. Contact a SpectraLink e ngineer on the technical support line 800 - 775 - 5330.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 30 8. System Administration 8.1 Troubleshoot Error Codes When an alarm is detected, the Error LED will light and the MCU’s status LEDs will display an alarm code.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 31 8.3 Status LED Codes Status LEDs 12345 Description Action Random Cycling The Link 150 M3 MCU is powering up. Initialization to follow. This is not an error and should change to another code after a minute.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 32 Status LEDs Description Action 4 IPC problem. Check IPC cabling by disconnecting and reconnecting the MCUs. Connect the Male RJ - 21 connector from the appropriate dema rcation block to the designated RJ - 21 connector (A or B) on each MCU.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 33 Status LEDs Description Action 5 The MCU was powered on with the mode switch in the wrong position. One or more of the Base Stations on this unit is disabled because it is located too close to other Base Stations.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 34 Wireless Telephone Status Indicator Messages Indicator Description Action BATT Displays whe n user is on the Wireless Telephone and the battery charge is low.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 35 8.4 Replace a Wireless Telephone If a Wireless Telephone breaks or needs to be replaced, the old Wireless Telephone must be deleted an d the new Wireless Telephone added.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 36 8.5 Replace an MCU When the system has more than one MCU, each MCU contai ns a complete set of configuration information for the entire system.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 37 8.6 Replace a Base Station To replace a Base Station, unplug the existing Base Station and plug in the new Base Station. • The LED will blink red and green as the system software downloads to the Base Station and the Base Station is tested.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 38 9. Wireless Telephone Planning Worksheet Copy and complete this worksheet to keep track of the port numbers, extensions, users, and features assigned to your Wireless Telephones.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 39 10. Base Station Location Worksheet MCU : ________ Base Station # Location (e.g.: building, floor #, detailed description) Port ID Base Station 1 1 Base Station 2 2 Base Station 3 3 Base Statio n 4 4 MCU: ________ Base Station # Location (e.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 40 11. Appendix A: Technical Parameters 11.1 Select Alternate Spread Spectrum Sequence The SpectraLink system uses spread spectrum radio transmission.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 41 11.2 Change Companding The factory setting on the Link 150 M3 MCU is compatible with Mu - law companding (signal compression), which is the standard used by most PBXs in North America.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 42 12. Appendix B: Program Analog Features 12.1 Defining Macros On an analog telephone system, telephone system features such as transfer, hold, or speed dial are usually accessed via key presses or hook flashes.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 43 12.3 Program Macro Codes Functions are d efined by placing an Administrative Call using the Administrative Wireless Telephone (registered to Line 2 of MCU 1).
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 44 12.4 Examples of Programming Transfer: On your telephone system, the Transfer feature is accessed using Flash * 7 . On the Wireless Telephone, Transfer will be accessed using FCN 2 .
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 45 13. App endix C: Installing the Open Applications Interface (OAI) Telephony Gateway The OAI Telephony Gateway (MOG 500) allows the Link 150 M3 MCU to interface with an application server as shown in the diagram belo w.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 46 13.2 The OAI Telephony Gateway’s Front Panel The OAI Telephony Gateway’s front pane l has the following status indicators.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 47 13.4 Initial Test Use only the provided Class II AC Adapter with out put 24Vdc, 1A, 24W. 1. Connect the power plug from the OAI Telephony Gateway’s power adapter to the jack labeled POWER on the back of the OAI Telephony Gateway box.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 48 13.5 Connect the OAI Telephony Gateway to the MCU 1. The OAI Telephony Gateway must be connected as the last box in the MCU chain. Connect the OAI Telephony Gateway to the OUT port on the MCU, using the IPC cable supplied.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 49 13.6 Connect the OAI Telephony Gateway to the Application Server Using a standard 9 - pin fe.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 50 13.8 Certification Test When the OAI Telephony Gateway is properly connected to the applicat.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 51 Index AC Adapter MCU, 18 OAI, 47 A - law, 41 Alternate sequenc e, 40 Function Keys, 49 Atten.
SpectraLink Corporation Link WTS Installation and Operation Part Number: 72 - 0075 - 01 - C - W.doc Page 52 Mounting, 19 Multiple, 20 Replacing, 36 Mode Switch, 5 Modem, 10, 26 Mounting Hardware, 18 M.
Een belangrijk punt na aankoop van elk apparaat SpectraLink 150 M3 MCU (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen SpectraLink 150 M3 MCU heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens SpectraLink 150 M3 MCU vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding SpectraLink 150 M3 MCU leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over SpectraLink 150 M3 MCU krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van SpectraLink 150 M3 MCU bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de SpectraLink 150 M3 MCU kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met SpectraLink 150 M3 MCU . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.