Gebruiksaanwijzing /service van het product BR50 van de fabrikant Stanley Black & Decker
Ga naar pagina of 24
© 2012 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 72962 7/2014 V er . 3 BR50 HYDRAULIC BREAKER USER MANUAL Safety , Operation and Maintenance.
2 ► BR50 User Manual DECLARATION OF CONF ORM ITY ÜBEREINSTIMM UNGS - ERKLARUNG DECLARATION DE CONF ORMITE CEE DECLARACION DE CONFO RMIDAD DICHIARAZIONE DI CONFO RMITA Hydraulic Tools _______ ______.
BR50 User Manual ◄ 3 SERVICING: This manual contains safety , operation, and routine maintenance instructions. Stanley Hydraulic T ools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certied dealer .
4 ► BR50 User Manual Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel.
BR50 User Manual ◄ 5 T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safety . Re- view them carefully before operating the tool and before performing general maintenance or repairs.
6 ► BR50 User Manual • W arning: Hydraulic uid under pressure could cause skin injection injury . If you are injured by hydraulic uid, get medical attention immediately . • Keep all body parts away from the working tool. • When handling material or the tool bit, wear your (PPE) Personal Protection Equipment.
BR50 User Manual ◄ 7 SAFETY T AG P/N 15875 (Shown smaller then actual size) DANGER DANGER READ OPERA TION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT . USE ONL Y P ARTS AND REP AIR PROCEDURES APPROVED BY ST ANLEY AND DESCRIBED IN THE OPERA TION MANUAL.
8 ► BR50 User Manual The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools.
BR50 User Manual ◄ 9 Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose - Fiber Braid - for Utility Bu.
10 ► BR50 User Manual Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max. uid viscosity of: (at min.
BR50 User Manual ◄ 1 1 NOTE: Partially depressing the trigger allows the tool to run at slow speed. Slow-speed operation permits easier starting of the tool bit into the work surface. 5. T o start, break an opening (hole) in the center of the surface.
12 ► BR50 User Manual • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the OFF position when coupling or uncoupling hydrau- lic tools. Failure to do so may result in damage to the quick couplers and cause overheating of the hy- draulic system.
BR50 User Manual ◄ 13 PROBLEM CAUSE REMEDY T ool does not run. Power unit not functioning. Check power source for proper ow and pressure (7–9 gpm/ 26–34 lpm, 2000 psi/ 140 bar) or 5–6 gpm /18–22 lpm at 1500–2000 psi /105–140 bar . Couplers or hoses blocked.
14 ► BR50 User Manual ACCUMULA TOR TESTING PROCEDURE T o check or charge the accumulator the following equip - ment is required: • 31254 Charge Kit: which includes the following. – Accumulator T ester (Part Number 02835). – Charging Assembly (P/N 15304: includes a liq- uid lled gauge with snub valve, hose and t - tings).
BR50 User Manual ◄ 15 Pressure Range................................................................................................................ 1500-2000 psi/105-140 bar Maximum Back Pressure.....................................................
16 ► BR50 User Manual TEST EQUIPMENT Accumulator T ester ............................................................................................................................................ 02835 Flow and Pressure T ester ...................
BR50 User Manual ◄ 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 3 15 11 12 32 33 34 35 36 37 38 39 37 38 40 41 42 43 44 46 45 PICTURED IS A BR50120 FOR BREAKER FOOT P ARTS THA T PERT AIN TO YOUR MODEL SEE P AGES 21 thru 23.
18 ► BR50 User Manual ITEM P/N QTY DESCRIPTION 1 01652 2 HOSE WHIP 12" 2 02494 2 HANDLE GRIP 3 02900 2 ROLL PIN 4 03972 1 COUPLER,3/8FEM. 3/8NPT 5 03973 1 COUPLER,3/8MALE 3/8NPT 6 04058 1 SPRIN.
BR50 User Manual ◄ 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 3 51 52 53 54 55 56 57 58 59 60 61 62 63 64 56 57 65 8 9 PICTURED IS A BR5017801 FOR BREAKER FOOT P ARTS THA T PERT AIN TO YOUR MODEL SEE P AGES 21 thru 23.
20 ► BR50 User Manual ITEM P/N QTY DESCRIPTION 1 01652 2 HOSE WHIP 12" 2 02494 2 HANDLE GRIP 3 02900 2 ROLL PIN 4 03972 1 COUPLER,3/8FEM. 3/8NPT FL.
BR50 User Manual ◄ 21 INSTALL WITH A LIGHT COATING OF LOCTITE #609 ON I.D. OF FOOT BORE INSTALL WITH LOCTITE #609 2 1 3 1 4 1 6 1 14 1 5 1 11 1 12 1 10 1 13 1 1 1 7 1 8 1 9 1 9 1 1 1 ITEM P/N QTY DE.
22 ► BR50 User Manual INSTALL WITH A LIGHT COATING OF LOCTITE #609 ON I.D. OF FOOT BORE INSTALL WITH LOCTITE #609 2 1 3 1 4 1 6 1 14 1 5 1 11 1 12 1 10 1 13 1 1 1 7 1 8 1 9 1 9 1 1 1 ITEM P/N QTY DE.
BR50 User Manual ◄ 23 INSTALL WITH LOCTITE #609 INSTALL WITH A LIGHT COATING OF LOCTITE #609 ON I.D. OF FOOT BORE. ALIGN HEX AS SHOWN 2 1 3 1 4 1 17 1 5 1 12 1 9 1 16 1 10 1 13 1 11 1 15 1 14 1 1 1 .
Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulics.com.
Een belangrijk punt na aankoop van elk apparaat Stanley Black & Decker BR50 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Stanley Black & Decker BR50 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Stanley Black & Decker BR50 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Stanley Black & Decker BR50 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Stanley Black & Decker BR50 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Stanley Black & Decker BR50 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Stanley Black & Decker BR50 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Stanley Black & Decker BR50 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.