Gebruiksaanwijzing /service van het product 26-0313000-00 van de fabrikant Barco
Ga naar pagina of 432
rëÉêÛë=dìáÇÉ b å Å ç êÉ = m êÉë É å í~ í á ç å = p ó ëíÉ ã • Manual # 26-0313 000-00 • Revision 04.
2 Encore Prese ntation System • User ’s Guide • Rev 04 båÅçêÉ=mêÉëÉåí~íáçå=póëíÉã= √ =rëÉêÛë=dìáÇÉ `çéóêáÖÜí © Barco, Inc. February 5, 2010 All rights reserved. No pa rt of this docume nt may be copied, reproduced or translated.
Encore Prese nt ation System • User’s Gu ide • Rev 04 3 agreed upon in the contract, al l guarantee claims of the purchaser will be rendered inva lid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry prov id ed by the purchaser , e.
4 Encore Prese ntation System • User ’s Guide • Rev 04 léÉê~íçêë=p~ÑÉíó=pìãã~êó The general safety informa tio n in this summary is for operating personnel. aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë There are no user-serviceable parts within the unit.
Encore Prese nt ation System • User’s Gu ide • Rev 04 5 qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=j~êâáåÖ= t^okfkd Highlights an operating procedure, practice, condit ion, statement, etc., wh ich, if not strictly observed, could result in injury to or death of personnel.
6 Encore Prese ntation System • User ’s Guide • Rev 04 `Ü~åÖÉ=eáëíçêó The table below lists the changes to the Encore Presentation System User ’s Guide. T able 0-1. Change History Rev Date ECP # Description Approved By A 12/10/04 1360 Released R.
Encore Prese nt ation System • User’s Gu ide • Rev 04 7 q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=N fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=NT Software Version . . . . . . . . .
8 Encore Prese ntation System • User ’s Guide • Rev 04 Table of Contents M/E Input Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Program Output Notes . . . . . . . . . . . . . . . . . . . .
Encore Prese nt ation System • User’s Gu ide • Rev 04 9 Table of Contents Destination Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Source Selection Bus . . . . . . . . . . . . . . . . . . . . . . . . .
10 Encore Presentation System • User ’s Guide • Rev 04 Table of Contents Rotary Encoder Menu . . . . . . . . . . . . . . . . . . . . . . 179 TBar & Joystick Menu . . . . . . . . . . . . . . . . . . . . . . 180 Key Detect Menu . . . . . . . .
Encore Prese nt ation System • User’s Gu ide • Rev 04 1 1 Table of Contents Crop Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 Source Adjustment Menus . . . . . . . . . . . . . . . .
12 Encore Presentation System • User ’s Guide • Rev 04 Table of Contents Aux Destination Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 Aux Destination Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Encore Prese nt ation System • User’s Gu ide • Rev 04 13 Table of Contents Understanding Split and Mix Modes . . . . . . . . . . . . . . . . . . . . . . . . . 321 Split Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14 Encore Presentation System • User ’s Guide • Rev 04 Table of Contents Storing User Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 Applying User Keys . . . . . . . . . . . . . . . . . . . . . . . . . . .
Encore Prese nt ation System • User’s Gu ide • Rev 04 15 Table of Contents Via Web Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Serial Upgrade Method. . . . . . . . . . . . . . . . . . . . . . . .
16 Encore Presentation System • User ’s Guide • Rev 04 Table of Contents.
Encore Prese nt ation System • User’s Gu ide • Rev 04 17 N K==fåíê çÇìÅíáçå This chapter is designe d to introduce you to t he Encore Presentation System.
18 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå Software Version pçÑíï~êÉ=sÉêëáçå This version of the Encore User ’s Guide is based on softw are versio n 1.24 . All new features in this version (and all pr evious versions) are listed in the “ New Feature Review ” section on page 35.
Encore Prese nt ation System • User’s Gu ide • Rev 04 19 NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëÉ=qÜáë=dìáÇÉ Following are tips for streamlining your use of th is User ’s Guide in its electronic “PDF” form.
20 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå Conventi ons `çåîÉåíáçåë= The following conventions are used througho ut this guide: • The symbol denotes an operations procedure. • The symbol S denotes an example .
Encore Prese nt ation System • User’s Gu ide • Rev 04 21 NK==fåíêçÇìÅíáçå Terms and Definiti ons ~ When discussing Encore operations, the term “ mixer ” will be used — specifically because the term “mixer” is silk-screened on the panel.
22 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview póëíÉã=lîÉêîáÉï The following topics are discu ssed in this section: • Advanced V.
Encore Prese nt ation System • User’s Gu ide • Rev 04 23 NK==fåíêçÇìÅíáçå System Overview båÅçêÉ=cÉ~íìêÉë Following is a detailed list of Encore features: • Up to 12 independent windows or 6 wind ows with se amless transitions.
24 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview qÜÉ=båÅçêÉ=sáÇÉç=mêçÅÉëëçê The Encore Video Processor is a compact cha ssis that provides the Enco re Presentation System’s input and output circui try .
Encore Prese nt ation System • User’s Gu ide • Rev 04 25 NK==fåíêçÇìÅíáçå System Overview • 2048 x 1080p Digital Cinema video • Plasma display resolutions The figure below illustra tes a bl ock diagra m of the VPx’s M/E. Figure 1-3.
26 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview ^=tçêÇ=^Äçìí=i~óÉêë Within the Encore system, each mixer has two layers, A and B , and each can be assigned to either PIP or Key functionality .
Encore Prese nt ation System • User’s Gu ide • Rev 04 27 NK==fåíêçÇìÅíáçå System Overview • Between mixers, the hierarchy of priorities is easy: Figure 1-5. Mixer Priority ~ The Backgrou nd layer is always at the bottom. ~ All effects on Mixer 1 are visually in front of the background.
28 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview bÑÑÉÅí=`çãÄáå~íáçåë A fully-loaded Encore VP or VPx is a unit with three mixer (M/E ) boards. A unit configu red in this way can scale six input sources to create PIPs and/o r Keys.
Encore Prese nt ation System • User’s Gu ide • Rev 04 29 NK==fåíêçÇìÅíáçå System Overview • Single Mixer Effect 2 This transi tion is similar t o effect 1, but because the DSK is not i n use, the background can t ransition from source A t o B, and the PI P can transition b etween layers A and B.
30 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview • Single Mixer Effect 5 In this effect, because the DSK is in use, th e background canno t transition — you can use either A or B. Here, you can independently fade two scaled PIPs up and down — with or without t he DSK on scre en.
Encore Prese nt ation System • User’s Gu ide • Rev 04 31 NK==fåíêçÇìÅíáçå System Overview • Dual Mixer Effect 2 With this dual Mixer effect, you can tran sition background s between sources A and B, plus independe ntly size, position, cut or fade a PIP and key on each Mixer .
32 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview • T riple Mixer Effect 2 This effect enables you to transition be tween background s sour ce s, plus independently size, posi tion, cut or fade a PIP and key on each of the three Mixers.
Encore Prese nt ation System • User’s Gu ide • Rev 04 33 NK==fåíêçÇìÅíáçå System Overview • The range of external devices that can be controlled is greatly increased, permitting users to automate ent ire shows. The Events Manager software also supports the management of digital media sources.
34 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview mêçÇìÅí=aáÑÑÉêÉåíá~íáçå The table below illustrates the differences between the small (SC) and large (LC) Encore controllers. T able 1-1.
Encore Prese nt ation System • User’s Gu ide • Rev 04 35 NK==fåíêçÇìÅíáçå New Feature Re view kÉï=cÉ~íìêÉ=oÉîáÉï This section lists the new features that have been impl emented in recent versions of Encore software. Reference links are provided.
36 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå New Feature Review pçÑíï~êÉ=sÉêëáçå=NKOO=cÉ~íìêÉë The following feat ures were impl emented in software version 1.
Encore Prese nt ation System • User’s Gu ide • Rev 04 37 NK==fåíêçÇìÅíáçå New Feature Re view • Enhanced Source Preview The Source Preview function has been en han ced. After the button has been pushed for the first time, the ne xt press sizes the PIP t o 1:1, with respect t o the source’s input resolution.
38 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå New Feature Review • Support for Lantro nix UDS2100 Support is provided for the Lantroni x UDS2100 , a serial -to-Ethernet device th at replaces the UDS200 — which Lant ronix is pha sing out.
Encore Prese nt ation System • User’s Gu ide • Rev 04 39 NK==fåíêçÇìÅíáçå New Feature Re view standard Aux (monitors), ImagePRO Aux and PresentationPRO-II Aux . Refer to Appendix D, “ Working With Destinatio ns ” on page 393 for details.
40 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå New Feature Review • Support for Analog Backg ro unds Using the Backgrou nd Input Setup Menu , you can choose between Analog, DVI Matte and “frame grab” backgrounds.
Encore Prese nt ation System • User’s Gu ide • Rev 04 41 NK==fåíêçÇìÅíáçå New Feature Re view • Programmable Controller Lockout Y ou can lock the Contro ller , t hus preventing key presses from cha nging the system. While locked, serial commands can still be sent via t he Console Port.
42 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå New Feature Review.
Encore Prese nt ation System • User’s Gu ide • Rev 04 43 O K = = e ~ êÇï~ êÉ = l êá Éå í ~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides detailed information about Encore’s hardware, including the Video Processor , VPx , and the Controller (rear panel only).
44 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors sáÇÉç=mêçÅÉëëçêë The following topics are di scussed in this sectio n: • Video Proc.
Encore Prese nt ation System • User’s Gu ide • Rev 04 45 2. Hardware Orientation Video Processors smñ=cêçåí=m~åÉä The VPx front panel is identica l to the “standard” VP front panel, with the exception of th e VPx product label, as shown below: Figure 2-2.
46 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors 1) Preview Out DVI One DVI connect or is provided for Digital Preview Output . In Appendix A, refe r to the “ DVI Connector Pinout s ” section on page 369 for pinouts.
Encore Prese nt ation System • User’s Gu ide • Rev 04 47 2. Hardware Orientation Video Processors 10) Ethernet Port One RJ-45 connector is provided for 10/100 BaseT Ethernet communication s. For multiple connections, use an Eth ernet switch on an isolated network.
48 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors smñ=oÉ~ê=m~åÉä The figure below illustra tes the VPx rear panel: Figure 2-4. VPx Rear Panel Please note: • Connectors 1 throu gh 10 are part of the VPx’s output board, and all output connections are standard.
Encore Prese nt ation System • User’s Gu ide • Rev 04 49 2. Hardware Orientation Video Processors 3) Program 2 Out Analog One 15-pin D connector is provided fo r t he Analog Program 2 Output . This output is identical to the analog Program 1 Output , e xcept that it do es not include edge feathering and da ta doubling components.
50 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors 10) Ethernet Port One RJ-45 connector is provided for 10/100 BaseT Ethernet communication s. For multiple connections, use an Eth ernet switch on an isolated network.
Encore Prese nt ation System • User’s Gu ide • Rev 04 51 2. Hardware Orientation Video Processors With this in mind, the informat ion below lists how the physical connecto rs rela te to the various mixers on different VP and VPx configurations. Keep this correlation in mind when you are making rear-panel connections.
52 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors jLb=`çååÉÅíçêë=EsmF The figure below ill ustra tes a close-up of t he M/E con nectors on the VP . Even though th e figure uses M/E 1’s board, all M/E connections a re identical.
Encore Prese nt ation System • User’s Gu ide • Rev 04 53 2. Hardware Orientation Video Processors An M/E’s Source Link Output must always be connected to its associated M/E Source Link Input on the next chassis, and never cross-routed. S Connect M/E 2’s Source Link Output on Processor 1 to M/E 2’s Source Link Input on Processor 2.
54 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors jLb=`çååÉÅíçêë=EsmñF The figure below ill ustrates a close-up of t he M/E connectors on th e VPx. Even though the figure uses M/E 1’s board, all M/E connection s are identical o n the VPx.
Encore Prese nt ation System • User’s Gu ide • Rev 04 55 2. Hardware Orientation Video Processors b) Source Link Out One DVI connector is provided for the M/E’s Source Link Outp ut . For wide screen and multi-screen app licat ions, this connecto r loops your inputs to the next VP or VPx in the chain.
56 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation M/E Input Notes jLb=fåéìí=kçíÉë Please note the following important poi nts regarding M/E inputs: • Single Processor Configura t io ns (VP and VPx) — Inputs are co nnected to the VP in the normal manner .
Encore Prese nt ation System • User’s Gu ide • Rev 04 57 2. Hardware Orientation Program Ou tput Notes mêçÖê~ã=lìíéìí=kçíÉë For both VP and VPx units, please note the following imp.
58 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Controller Rear Panels `çåíêçääÉê=oÉ~ê=m~åÉäë The figure below ill ustra tes the rear pa nel connectors on both Controll ers ( SC and LC ). The panels are identical on bot h models.
Encore Prese nt ation System • User’s Gu ide • Rev 04 59 2. Hardware Orientation Controller Rear Panels 3) MultiMedia Card Slot One MultiMedia Card Slot is provided for a Flash Memory Card connection t o the Controller . The flash card enables you to store and recall system configuration s, and transfer them between Cont rollers as required.
60 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Controller Rear Panels.
Encore Prese nt ation System • User’s Gu ide • Rev 04 61 P K = = e ~ êÇï~ êÉ = f å ë í~ ä ä ~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides comprehensive installati on inst ructions for the Encore system’s hardware.
62 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Safety Precautions p~ÑÉíó=mêÉÅ~ìíáçåë= For all Encore Presentation Syst em installation procedures, o.
Encore Prese nt ation System • User’s Gu ide • Rev 04 63 3. Hardware Installation Cable and Adapter Info rmation `~ÄäÉ=~åÇ=^Ç~éíÉê=fåÑçêã~íáçå The table below provides cable and ada pter informati on: * Cable and adapter quanti ties depend on the number of M/Es purchased in each VP or VPx.
64 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation fåëí~ää~íáçå Detailed installation procedures are provided fo r th e Encore configurations list ed below .
Encore Prese nt ation System • User’s Gu ide • Rev 04 65 3. Hardware Installation Installation páåÖäÉ=pÅêÉÉå=`çåÑáÖìê~íáçå The figure below illustra tes a block diagram of a single screen En core configuration. Use this diagram for reference in the followin g procedu re.
66 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation 2. In Appendix A, refer to the “ Physical and Electrical Specifications ” section on page 367 for electrical and mechani cal details.
Encore Prese nt ation System • User’s Gu ide • Rev 04 67 3. Hardware Installation Installation d. Ensure that all source s are properly connected to your router(s).
68 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation qêáéäÉ=pÅêÉÉå=`çåÑáÖìê~íáçå The figure below illustra tes a block diagram of a triple screen Encore con figuration. This diagram can be used as reference in th e procedure.
Encore Prese nt ation System • User’s Gu ide • Rev 04 69 3. Hardware Installation Installation Use the following steps to install a triple screen Encore confi gurat ion: 1. Follow the u np acking proced ure s as l ist ed in the “ Unp acking and Inspection ” section on page 62.
70 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation c. T o connect two (or more) serial routers, a third-party Ethernet-to-Serial converter is required, such as the Lan tronix model UDS1 00 , UDS200 or UDS2100 ( http://www .
Encore Prese nt ation System • User’s Gu ide • Rev 04 71 3. Hardware Installation Installation 14. System ID — Using the Unit ID Selector , set th e ID of VP #1 to 1 , VP #2 to 2 , VP #3 to 3 . Each Processor must have a unique ID. 15. Power On — a ll power on instru ctions are covered in Chapter 6.
72 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation táÇÉ=pÅêÉÉå=`çåÑáÖìê~íáçå The figure below illustrates a block diagram of a “triple” wi de screen configuration. Use this diagram for reference in the followi ng procedure.
Encore Prese nt ation System • User’s Gu ide • Rev 04 73 3. Hardware Installation Installation Use the following steps to install a wide screen Encore conf iguration: 1. Follow the u np acking proced ure s as l ist ed in the “ Unp acking and Inspection ” section on page 62.
74 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation • Connect the compute r ’s “head 3” to processor 3, input 3A d. The DSK so urce may originate from a co mputer with a multi-head graphics card, but it is not a requiremen t.
Encore Prese nt ation System • User’s Gu ide • Rev 04 75 3. Hardware Installation Installation d. Ensure that all source s are connected to your router(s).
76 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation táÇÉ=pÅêÉÉå=`çåÑáÖìê~íáçå=mäìë=táÇÉ=pÅêÉÉå=mêÉîáÉï The figure bel.
Encore Prese nt ation System • User’s Gu ide • Rev 04 77 3. Hardware Installation Installation Please note the following poi nts regarding this configuration: • Processor #4 receives DVI Program and Preview feeds from processors #1, #2 and #3.
78 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation 4. Source Connections — connect DVI outputs from processors one, two and three to processor #4’s scaler inputs: ~ Connect processor #1 DVI Program 2 output to processor #4 input 1A .
Encore Prese nt ation System • User’s Gu ide • Rev 04 79 3. Hardware Installation Installation 4. Select the destinati on that you assigne d to processor #4. 5. Scale and align t hree PIPs for the “Preview” po rtion of the d isplay , and thre e PIPs for the “Program” port ion, as illustrate d in Figure 3-5 on page 77.
80 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation páåÖäÉ=pÅêÉÉå=pí~Åâ=`çåÑáÖìê~íáçå “ St acking ” is a configurati on met hod that provides access to six mixers, with th e ability to display up to 12 PIPs on screen simultaneously .
Encore Prese nt ation System • User’s Gu ide • Rev 04 81 3. Hardware Installation Installation For this procedure, you will need: Use the following steps to install a single screen “stack” configu ration: 1. Follow the u np acking proced ure s as l ist ed in the “ Unp acking and Inspection ” section on page 62.
82 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation b. Using the info rma tion from the chart: • Connect “direct” sources 1 - 6 to each M/E’s input connectors on the “ bo ttom stack ” processor .
Encore Prese nt ation System • User’s Gu ide • Rev 04 83 3. Hardware Installation Installation 10. ScreenPRO-II Connections — if your system includes one (or more) dest ination ScreenPRO-II units, you ca n configure the u nits for internal or external routing: a.
84 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation táÇÉ=pÅêÉÉå=pí~Åâ=`çåÑáÖìê~íáçå The figure below illustra tes a block diagram of a wide screen “stack” configuration. Aux destinations are not shown .
Encore Prese nt ation System • User’s Gu ide • Rev 04 85 3. Hardware Installation Installation Use the following steps to install a wide screen “stack” configuration: 1. Follow the u np acking proced ure s as l ist ed in the “ Unp acking and Inspection ” section on page 62.
86 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation • On stack #1 only , conne ct “direct” sources 1 - 6 to each M/E’s input connectors on the “ bo tto m stack ” processor .
Encore Prese nt ation System • User’s Gu ide • Rev 04 87 3. Hardware Installation Installation b. On the second stack: • Connect the bottom stack’ s DVI Preview Output to the to p stack’s Background 1 input ( 3A ). • Connect the bottom stack’ s DVI Program Output to th e top stack’s Background 2 input ( 3B ).
88 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation 1 1. Output Connection s — all output monito r and projector connection s originate from the “ top st ack ” processors: a.
Encore Prese nt ation System • User’s Gu ide • Rev 04 89 3. Hardware Installation Connection Charts `çååÉÅíáçå=`Ü~êíë= A series of Connection Cha rt s are provided on the follo wing pages to assist with your input connections.
90 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Connection Charts `Ü~êí=fåëíêìÅíáçåë Following are in structions for using the connection charts: • Router I/O Chart s Complete one chart for each video router in your system (up to the maximum 8).
Encore Prese nt ation System • User’s Gu ide • Rev 04 91 3. Hardware Installation Connection Charts p~ãéäÉ=`çååÉÅíáçå=`Ü~êíë Following are sample connection charts for an Encore system comprised of 1 x analog router , 2 x direct inpu ts, and 6 x destinations.
92 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Connection Charts _ä~åâ=`çååÉÅíáçå=`Ü~êíë= The following blank conne ction charts are provided: .
Encore Prese nt ation System • User’s Gu ide • Rev 04 93 3. Hardware Installation Connection Charts T able 3-12. Router I/O Chart #2 Router #2 Router T ype: Analog Digital DVI Source Router Input/Outp ut De stination 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 T able 3-13.
94 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Connection Charts T able 3-14. Router I/O Chart #4 Router #4 Router T ype: Analog Digital DVI Source Router Input/Outp ut De stination 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 T able 3-15.
Encore Prese nt ation System • User’s Gu ide • Rev 04 95 3. Hardware Installation Connection Charts T able 3-16. Router I/O Chart #6 Router #6 Router T ype: Analog Digital DVI Source Router Input/Outp ut De stination 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 T able 3-17.
96 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Connection Charts aáêÉÅí=båÅçêÉ=fåéìí=`Ü~êí= Complete the following chart for any sources that will be con nected directly to Encore (such as a computer for a DVI background).
Encore Prese nt ation System • User’s Gu ide • Rev 04 97 3. Hardware Installation Connection Charts båÅçêÉ=aÉëíáå~íáçå=`Ü~êí= Complete the fol lowing chart for all Encore destinations.
98 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections mêçÖê~ã=~åÇ=pçìêÅÉ=iáåâ=`çååÉÅíáçåë The following top.
Encore Prese nt ation System • User’s Gu ide • Rev 04 99 3. Hardware Installation Program and Source Li nk Connections inherent resolution of the output image remains that of the source material, 1920x1080 pixels.
100 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections sáÇÉç=mêçÅÉëëáåÖ The purpose of the edge-blending process is to provide a smooth transition for the eye over the blending reg ion.
Encore Prese ntati on System • User’s Gu ide • Rev 04 101 3. Hardware Installation Program and Source Li nk Connections • Edge Feathering The overlapping image data in the bl end region must be edge-feathered t o support a seamless opti cal blend.
102 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections `çååÉÅíáåÖ=mêçÖê~ã=~åÇ=pçìêÅÉ=iáåâë This section provides instructions for conn ecting Program Link and Source Li nk connections (DVI-I) in a variety of Encore confi gurations.
Encore Prese ntati on System • User’s Gu ide • Rev 04 103 3. Hardware Installation Program and Source Li nk Connections 3. For the last processor in the cha in, do not connect the Program Link Out connector .
104 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections `ÉåíÉê=gìëíáÑáÉÇ=`çåÑáÖìê~íáçå Center justification m.
Encore Prese ntati on System • User’s Gu ide • Rev 04 105 3. Hardware Installation Program and Source Li nk Connections Connect: ~ Processor 1 Program Link Out > Processor 2 Program Link In ~ Processor 2 Program Link Out > Processor 3 Program Link In ~ Processor 3 Program Link Out > Processor 1 Program Link In 3.
106 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections.
Encore Prese ntati on System • User’s Gu ide • Rev 04 107 QK==`çåíê ç ääÉê=lê áÉ åí ~íáçå få=qÜáë=`Ü~éíÉê This chapter describes each se ction of the system’s two cont rollers — the models LC and SC.
108 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller LC Front Panel `çåíêçääÉê=i`=cêçåí=m~åÉä The figure below ill ustra tes the Controller LC fro nt panel: Figure 4-1.
Encore Prese ntati on System • User’s Gu ide • Rev 04 109 4. Controller Orientation Controlle r LC Front Pa nel 3) Alphanumeric Keyp ad The Alphanumer ic Keypad is reserved for numeric functions. This section is only available on the LC Controller.
1 10 Encore Prese ntation System • User ’s Guide • Rev 04 4. Controller Orientation Controller LC Front Panel 13) T ransition Se ction The T ran sition Section incl udes the T- B a r for manually mixing sources on and off Program, plus dedicated buttons for cuts, auto-transi tions and sequencing.
Encore Prese nt ation System • User’s Gu ide • Rev 04 1 1 1 4. Controller Orientation Controlle r S C Front Panel `çåíêçääÉê=p`=cêçåí=m~åÉä The figure below illustra tes the Controller SC f r ont panel.
1 12 Encore Prese ntation System • User ’s Guide • Rev 04 4. Controller Orientation Controller SC Front Panel 4) Preset Section The Preset Section ena bles you to sto re and recall Cont roller setups, called “presets.” On the Controller SC, you have access to 64 presets — 8 pages of 8 presets each.
Encore Prese nt ation System • User’s Gu ide • Rev 04 11 3 4. Controller Orientation Use of Color rëÉ=çÑ=`çäçê Color plays an important role with each Controller ’s array of buttons: White button s are used for sou rces, destinati ons, presets and user keys.
1 14 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections `çåíêçääÉê=pÉÅíáçåë This section provides detailed descrip tions of each Controller secti on. Illustrations for both Controller models are provided , an d the diff erences in functionality are clea rl y noted.
Encore Prese nt ation System • User’s Gu ide • Rev 04 11 5 4. Controller Orientation Controller Sections qçìÅÜ=pÅêÉÉå=pÉÅíáçå The figure below ill ustra tes the T ouch Screen Sec ti on , which is identical on both Controller models.
1 16 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections 3) T ouch Screen All menus and functions can be accesse d in a variety of ways: ~ T ouch the desired label on the T ouch Screen itself (for example, th e {BORDER} button) to access the menu.
Encore Prese nt ation System • User’s Gu ide • Rev 04 11 7 4. Controller Orientation Controller Sections póëíÉã=hÉóé~Ç The figure below ill ustra tes the System Keypad , which provides direct access to system configuration and se tup menus.
1 18 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections Presets — press to display the Preset Recall Options Men u , which enables you to recall all (or part) of a stored preset. In Chapter 5, refer to the “ Prese t Recall Options Menu ” section on page 208 f or details.
Encore Prese nt ation System • User’s Gu ide • Rev 04 11 9 4. Controller Orientation Controller Sections ^äéÜ~åìãÉêáÅ=hÉóé~Ç The figure below shows the Alphanumeric Keypad which is used for certain numeric functions on the Controller LC on ly .
120 Encore Presentation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections gçóëíáÅâ=pÉÅíáçå The figure below ill ustra tes the Joystick Section , which is identical on both Contro llers.
Encore Prese nt ation System • User’s Gu ide • Rev 04 121 4. Controller Orientation Controller Sections Source — press to assign the Joystick to si zing an d positioning the source image within the PIP or Key boundaries.
122 Encore Presentation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections j~ÅÜáåÉ=`çåíêçä=pÉÅíáçå The figure below illustra tes the Machine Contro l Section , which is reserved for controlling external devices.
Encore Prese nt ation System • User’s Gu ide • Rev 04 123 4. Controller Orientation Controller Sections mêÉëÉí=pÉÅíáçå The figures below illustrate the Preset Sections on each Controller mode l. Figure 4-9. Preset Section, Controller SC Figure 4-10.
124 Encore Presentation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections Delete — hold down Dele te , then press the desire d Preset bu tton to delete that regi ster from memory . S T o delete pr eset 8 from me mory , press Delete + 8 .
Encore Prese nt ation System • User’s Gu ide • Rev 04 125 4. Controller Orientation Controller Sections aÉëíáå~íáçå=_ìë The figures below illustrate the Destination Bus on each Controlle r model. Figure 4-1 1 . Destination Bus, Controller SC Figure 4-12.
126 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections pçìêÅÉ=pÉäÉÅíáçå=_ìë The figures below illustrate the Source Selection Bus on each Controlle r . Figure 4-13. Source Selection Bus, Controller SC Figure 4-14.
Encore Prese nt ation System • User’s Gu ide • Rev 04 127 4. Controller Orientation Controller Sections Following are descri pt ions of each button’s function on the Source Selection Bus . Source Buttons — press to assign the source to the blinking “mixer” button in t he Layer Control Section .
128 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections i~óÉê=`çåíêçä=pÉÅíáçå The figures below illustrate the Layer Control Sectio n on each Controller . Figure 4-15. Layer Control Section, Controller SC Figure 4-16.
Encore Prese nt ation System • User’s Gu ide • Rev 04 129 4. Controller Orientation Controller Sections Following are descript ions of each button in the Layer Contr ol Section . Background Buttons — press to select an unscaled background ( A or B ) on Preview for transition to or from Program.
130 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections • T o clear a layer from Preview (so that it will transition off Program), press the desired layer button, th en press Clear Layer .
Encore Prese nt ation System • User’s Gu ide • Rev 04 131 4. Controller Orientation Controller Sections i~óÉê=cìåÅíáçåë=pÉÅíáçå The figures below illustrate the Layer Functions Section on each Controller . Figure 4-17. Layer Functions Section, Controller SC Figure 4-18.
132 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections Clone — for widescreen conf igurations only , press to make an exact copy of a layer onto the opposite screen. All parameters of th e PIP or Key are cloned, incl uding the source’s shadow , key effects, border and size.
Encore Prese nt ation System • User’s Gu ide • Rev 04 133 4. Controller Orientation Controller Sections Preview OSD — Clear Layer — press to remove the currently select ed (blinking) layer from Preview — in preparation for transitioning it off Program.
134 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections iáîÉ=pïáíÅÜ=pÉÅíáçå The figure below ill ustra tes the Live Switch Section on both Control ler models.
Encore Prese nt ation System • User’s Gu ide • Rev 04 135 4. Controller Orientation Controller Sections qê~åëáíáçå=pÉÅíáçå The figures below illustrate the T ransition Sec t io n on each Controller . The sect ions are essentially identical.
136 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections Go / + — Go / - — Note The Go / + function is curr ently not imple m e nt e d. GO / + Note The Go / - function is currently not implemented.
Encore Prese nt ation System • User’s Gu ide • Rev 04 137 4. Controller Orientation Controller Sections dêçìé=`çåíêçä=pÉÅíáçå The figures below illustrate the Gr oup Control Sec tion on each Cont rolle r . The sections are essentially identical, except that the Controller SC has fewer group buttons.
138 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections Learn — (Controller LC only) • T o learn (pro gram) a group butt on, activate th e desired destinat ions on the Destination Bu s , press and hol d Learn , th en press the desired Group button.
Encore Prese nt ation System • User’s Gu ide • Rev 04 139 4. Controller Orientation Controller Sections mêçÖê~ã=mêÉëÉí=pÉÅíáçå The figures below illustrate the Program Preset Section on each Controller . Figure 4-23. Program Preset Section, Controller SC Figure 4-24.
140 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections i~óÉêL^ìñ=`çåíêçä=pÉÅíáçå The figures below illustrate the Layer/Aux Control section on each Controller model . Figure 4-25. Layer/Aux Control Section, Controller SC Figure 4-26.
Encore Prese n t ation System • User’s Gu ide • Rev 04 141 4. Controller Orientation Controller Sections AUX — (Controller LC only) All — (Controlle r LC only) Note The AUX button in the Layer/Aux Control Sectio n is not implemented.0 AUX Note The ALL button in the Layer/Aux Co ntrol Section is not currently implemented.
142 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections qê~åëáíáçå=cìåÅíáçåë=pÉÅíáçå The figures below illustrate the T ransition Fu nc tio ns Section on each Controller . Figure 4-27.
Encore Prese n t ation System • User’s Gu ide • Rev 04 143 4. Controller Orientation Controller Sections Swap — in “Mix Mode” for a given layer (with the Sp li t button off), press Swap to allow both PIPs in the mixer to be located independently .
144 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections rëÉê=hÉó=pÉÅíáçå The figure below ill ustra tes the User Key section on t he Controlle r LC. The Controller SC does not have User Keys.
Encore Prese n t ation System • User’s Gu ide • Rev 04 145 RK==jÉåì=lê áÉ åí ~íáçå få=qÜáë=`Ü~éíÉê This chapter describes all Encore system m enus, including how t hey are accessed, the functions that are availab le, and descriptions o f each menu tree (in bl ock diagram format).
146 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Conventions in this Chapter `çåîÉåíáçåë=áå=íÜáë=`Ü~éíÉê Please note the following important conven tions used in this chapter: • Button lab els on the T ouch Screen are shown in bold upp ercase letters between braces.
Encore Prese n t ation System • User’s Gu ide • Rev 04 147 5. Menu Orientation Home Menu eçãÉ=jÉåì The figure below ill ustra tes the Home Menu (on the Controller LC): Figure 5-1. Home Menu, Controller LC The Home Menu is the syst em’s top level menu.
148 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu fåéìí=jÉåì The following topics are di scussed in this sectio n: • Input Menu T ree • Input Menu.
Encore Prese ntati on System • User’s Gu ide • Rev 04 149 5. Menu Orientation Input Menu fåéìí=jÉåì=aÉëÅêáéíáçå The figure below ill ustra tes the Input Menu : Figure 5-3.
150 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu fåéìí=jÉåì=cìåÅíáçåë The following Input Menu functions are provided: • Destination — indicat es the destination on which you are curren tly working (as selected on the Destination Bu s ).
Encore Prese ntati on System • User’s Gu ide • Rev 04 151 5. Menu Orientation Input Menu • Contrast — sets the input’ s contrast. ~ Adjustment rang e : 75% to 125% • Brightness — sets the i nput’s brightness. ~ Adjustment rang e : 75% to 125% • Gamma — sets the input gamma, ena bling you to match the source’s gamma.
152 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu • Press { APPL Y FORMA T } to “accept” a manual ly selected input f ormat. In Appendix A, refe r to the “ Input an d Output Resolutio ns ” section on page 375 for details on all available resolutions.
Encore Prese ntati on System • User’s Gu ide • Rev 04 153 5. Menu Orientation Input Menu fåéìí=pìÄ=jÉåìë The following sub menus can be accessed f ro m the Input Menu : • Input Confi.
154 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu • Press { SA VE } to save the selected input in th e designated input fil e. • Press { DELETE } to delete the selected input fil e from the designat ed destination.
Encore Prese ntati on System • User’s Gu ide • Rev 04 155 5. Menu Orientation Input Menu páòáåÖ=jÉåì From the Input Menu , press { SIZING } to display one of two “context sensi tive” Sizing Menus — they change depending on the Sampling Mode selected on the Input Menu .
156 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu • H Active — sets the width of the active area. • H Position — sets the start of the active area’s horizontal of fset from H sync. • V T ot a l — fixed value which cannot be adjusted.
Encore Prese ntati on System • User’s Gu ide • Rev 04 157 5. Menu Orientation Input Menu `çäçê=_~ä~åÅÉ=jÉåì From the Input Menu , press { COLOR BALANCE } to display the Color Ba lance Menu . Figure 5-8. Color Balance Me nu (sample) The Color Balance Menu changes depen ding on the se lected Input T ype .
158 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu lìíéìí=jÉåì The following topics are di scussed in this sectio n: • Output Menu T ree • Output.
Encore Prese ntati on System • User’s Gu ide • Rev 04 159 5. Menu Orientation Output Menu lìíéìí=jÉåì=aÉëÅêáéíáçå The figure below ill ustra tes the Output Menu : Figure 5-10.
160 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu lìíéìí=jÉåì=cìåÅíáçåë The following Ou tput Menu functions are provided : • Destination — indicat es the destination on which you are curren tly working (as selected on the Destination Bu s ).
Encore Prese ntati on System • User’s Gu ide • Rev 04 161 5. Menu Orientation Output Menu båÜ~åÅÉÇ=lìíéìí=jÉåì From the Output Menu , press { E OUT } to display the Enhanced Output Menu . Figure 5-1 1 . Enhanced Output Menu (sample) The Enhanced Outp ut Menu sets up basic parameters for SP-II’s enhanced output.
162 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu Enhanced Outp ut Settings Menu From the Enhanced Output Menu , press { SETTINGS } to display the Enhanced Output Settings Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 163 5. Menu Orientation Output Menu Enhanced Outp ut Test Pattern Menu From the Enhanced Output Menu , press { TEST P A TTERN } to display the Enhanced Output T est Pattern Menu . Figure 5-13.
164 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu dÉåäçÅâ=jÉåì From the Output Menu , press { GLCK } to display the Ge nl oc k Menu . Figure 5-14. Genlock Menu (sample) The Genlock Menu tells the VP which type of analog genlock signal is connect ed t o the Processor ’s Genlock conne ctor .
Encore Prese ntati on System • User’s Gu ide • Rev 04 165 5. Menu Orientation Output Menu pÉííáåÖë=jÉåì From the Output Menu , press { SETTINGS } to display the Settings Menu . Figure 5-15. Settings Menu (sample) The Settings Menu set s sync parameters for your system’s monitors and projectors.
166 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu qÉëí=m~ííÉêå=jÉåì From the Output Menu , press { TEST P A TTERN } to display the T est Pattern Menu . Figure 5-16. T est Pattern Menu (sample) The T est Pattern Menu enables you to display test patterns for projector alignment.
Encore Prese ntati on System • User’s Gu ide • Rev 04 167 5. Menu Orientation Output Menu táÇÉ=pÅêÉÉå=pÉííáåÖë=jÉåì From the Output Menu , press { WIDE SCREEN } to display the Wide Screen Settings Menu .
168 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu Wide Screen Settings Menu (H Array) The Wide Screen Settings Menu (H Array) provides tools for wide screen setup and adjustment for horizontal arrays of destinations.
Encore Prese ntati on System • User’s Gu ide • Rev 04 169 5. Menu Orientation Output Menu • Marker Mode — enables and disables the wide screen markers, to show the boundaries of active da ta. In Chapter 7, refer to the “ Wide Screen Markers ” section on page 305 for details.
170 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu • T otal H Res — sets the total number of horizontal pixels in the overall w ide screen display . The formula is: # screens * horizontal output resolution - (H overlap * (# screens - 1)) As you adjust the T otal H Res , the H Overlap value tracks.
Encore Prese ntati on System • User’s Gu ide • Rev 04 171 5. Menu Orientation Output Menu Feather Setup Menu From the Wide Screen Settings Menu , either (V Array) or (H Array) , press {FEA THER SETUP} to display the Feather Se tup Menu . Figure 5-21.
172 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu póëíÉã=jÉåì The following topics are di scussed in this sectio n: • System Menu T r ee • System Menu Descri ption • System Sub Menus póëíÉã=jÉåì=qêÉÉ The figure below ill ustra tes the System Menu Tr e e : Figure 5-22.
Encore Prese ntati on System • User’s Gu ide • Rev 04 173 5. Menu Orientation System Menu póëíÉã=jÉåì=aÉëÅêáéíáçå The figure below ill ustra tes the System Menu : Figure 5-23. System Menu (sample) T o access the menu: • Press {SYSTEM} on the Home Menu , or press System in the Keypad Section .
174 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu • Press { INPUT P A TCH } to display the Input Source Patch Menu . Refer to the “ Input Source Patch Menu ” section on page 188 for details. • Press { ROUTER SETUP } to display the Router Specification Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 175 5. Menu Orientation System Menu póëíÉã=oÉëÉí=jÉåì From the System Menu , press { RESET } to display the System Reset Menu : Figure 5-24. System Reset Menu (sample) The Reset Menu enables you to perform various syst em reset functions .
176 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu pçÑíï~êÉ=sÉêëáçå=jÉåì From the System Menu , press { SW VER } to display the Sof tware V e rsion Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 177 5. Menu Orientation System Menu aá~ÖåçëíáÅë=pÉíìé=jÉåì From the System Menu , press { DIAG } to display the Diagnostics Setup Menu .
178 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu Widescreen Li nk Diagnostics Menu From the Diagnostics Setu p Menu , press { LINKS } to display the W idescreen Link Diagnostics M enu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 179 5. Menu Orientation System Menu Rotary Encoder Menu From the Diagnostics Setu p Menu , press { ROT A R Y ENCOD ER } to displa y the Rotary Encoder Menu .
180 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu TBar & Joystick Menu From the Diagnostics Setu p Menu , press { TBAR & JOYSTICK } to display the TBar & Joystick Diagno stic s Menu . Figure 5-29.
Encore Prese ntati on System • User’s Gu ide • Rev 04 181 5. Menu Orientation System Menu Key Detect Menu From the Diagnostics Setu p Menu , press { KEY DETECT } to display the Key Detect Menu .
182 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu aÉëíáå~íáçå=pÉíìé=jÉåì From the System Menu , press { DEST SETUP } to display the Dest in a tio n Setu p Me nu . Figure 5-31. Destination Setup Menu (sample) The Destinatio n Setup Menu enab les you to define each destinatio n.
Encore Prese ntati on System • User’s Gu ide • Rev 04 183 5. Menu Orientation System Menu • VP (SP) to Add — list s all available VP , VPx or ScreenPRO-IIs that can be assigned to the destinatio n. If a Processor is currently assigned to anoth er destination, it wi ll not appear in the list.
184 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu • Press { REMOVE } to remove the selected VP , VPx or ScreenPRO-II (on the VP [SP] to Remove line) from the current destination configuration. • Press { REMOVE ALL } to remove all units from t he current dest ination.
Encore Prese ntati on System • User’s Gu ide • Rev 04 185 5. Menu Orientation System Menu • Router Output — sel ects the specific router output designated as an Aux (as assigned on the router ’s Output Patch Menu ). • Press {RESET} to return all fie lds to < UNDEFINED >.
186 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu • DVI Router Output — selects the Aux router output (as assigned on the router ’s Output Patch Menu ). (Not applicabl e to PrePRO-II Aux destinations.) • ImagePRO Inpu t — selects the Image PRO input to which the route r output is connected.
Encore Prese ntati on System • User’s Gu ide • Rev 04 187 5. Menu Orientation System Menu kÉíïçêâ=pÉíìé=jÉåì From the System Menu , press { NETWORK SETUP } to display the Network Setup Menu .
188 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu fåéìí=pçìêÅÉ=m~íÅÜ=jÉåì From the System Menu , press { INPUT P A TCH } to display the Input Source Patch Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 189 5. Menu Orientation System Menu • Router Input — Applies to Rou ter connecti ons — selects the route r input th at you wish to associa te with the sou rce. The range depends on the number of inputs defined in the Router Specif ic at ion Menu .
190 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu oçìíÉê=péÉÅáÑáÅ~íáçå=jÉåì From the System Menu , press { ROUTER SETUP } to display the Rout er S pecificati on Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 191 5. Menu Orientation System Menu ~ D/As must be set up like routers. This enables yo u to define which D/A outputs are patched to which specific Video Processor connectors. • Number of Inputs — identifies the number of inputs on the selected router .
192 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu • Press { NEXT IP QUAD } to advance to the next 3-digi t set of numbers in the address.
Encore Prese ntati on System • User’s Gu ide • Rev 04 193 5. Menu Orientation System Menu Lantronix Setup Menu On the Router Specif ic ati on Menu , when Communic ation T ype is set to LANTRONIX , press { COMM SETUP } to display the Lantroni x Set up Menu : Figure 5-39.
194 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu lìíéìí=m~íÅÜ=jÉåì From the Router Specification Me nu , press { OUTPUT P A TCH } to d isplay the Outpu t Patch Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 195 5. Menu Orientation System Menu T o use this feature, perfo rm the following steps: a. Dial in the first out put number from which you want t o start. b. Define the VP/SP ID and the VP/SP input to which yo u want to connect this output.
196 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu jáëÅÉää~åÉçìë=jÉåì The following topics are di scussed in this sectio n: • Miscella.
Encore Prese ntati on System • User’s Gu ide • Rev 04 197 5. Menu Orientation Miscellaneous Menu jáëÅÉää~åÉçìë=jÉåì=aÉëÅêáéíáçå The Miscellaneous Me nu enables you to access Encore functi on s that do not fall into other distinct me nu cat egories.
198 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu jáëÅÉää~åÉçìë=pìÄ=jÉåìë The following sub menus can be accessed f ro m the Miscell.
Encore Prese ntati on System • User’s Gu ide • Rev 04 199 5. Menu Orientation Miscellaneous Menu içÅâçìí=`çÇÉ=jÉåì From the Miscellane ous Menu , press { LOCK } to display the Lockout Code M enu : Figure 5-44.
200 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu T o enter a new code (for bo th Controllers), use the first eight numbered buttons on the Preset Bus , and t hen confirm the new code.
Encore Prese ntati on System • User’s Gu ide • Rev 04 201 5. Menu Orientation Miscellaneous Menu Please note the following important poi nts regarding EDID: • For the external computer to correct ly see the EDID data, first turn on Encore power .
202 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu sáÇÉç=mêçÅÉëëçêë=fa=aÉÑáåáíáçå=jÉåì From the Miscellane ous Menu , press { DEFINE VP ID } to display the Video Processors ID Definition Menu : Figure 5-47.
Encore Prese ntati on System • User’s Gu ide • Rev 04 203 5. Menu Orientation Miscellaneous Menu i`a=pÉííáåÖë=jÉåì From the Miscellane ous Menu , press { LCD SETTINGS } to show the LCD Settings Menu : Figure 5-48.
204 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu rëÉê=mêÉÑÉêÉåÅÉ=jÉåì From the Miscellane ous Menu , press { USER PREF } to display the User Preference Menu : Figure 5-49. User Preference Menu (sample) The User Preference Menu enables you to set a variet y of user parameters.
Encore Prese ntati on System • User’s Gu ide • Rev 04 205 5. Menu Orientation Miscellaneous Menu transition. W hen User Effect is pressed on the controller , the “custom” transition properties are applied to th e current transiti on.
206 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu _~ÅâìéLoÉëíçêÉ=jÉåì From the Miscellane ous Menu , press { BACKUP RESTORE } to display the Backup/ Restore Me nu : Figure 5-50.
Encore Prese ntati on System • User’s Gu ide • Rev 04 207 5. Menu Orientation Miscellaneous Menu Current Backup Menu From the Backup/Resto re Menu , press {CHECK CARD} to display the Current B ackup Menu . This menu only appea rs if a Flash Memory Card is present.
208 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Preset Recall Options Menu mêÉëÉí=oÉÅ~ää=léíáçåë=jÉåì The Preset Recall Options Menu enables you to sele ct which part of a preset register you wish to recall.
Encore Prese ntati on System • User’s Gu ide • Rev 04 209 5. Menu Orientation Effects Menu bÑÑÉÅíë=jÉåì The figure below illustra tes a sample Effect s Menu : Figure 5-53. Effect s Menu (sample) T o access the menu: • Press EFFECTS on the Home Menu , or press Effect s in the Keypad Section .
210 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Copy Setup Menu `çéó=pÉíìé=jÉåì The figure below ill ustra tes the Copy Setup Menu : Figure 5-54. Copy Setup Menu (sample) T o access the menu: • Press COPY in the Layer Function Section .
Encore Prese ntati on System • User’s Gu ide • Rev 04 21 1 5. Menu Orientation User Key Copy Setu p Menu rëÉê=hÉó=`çéó=pÉíìé=jÉåì On the Co ntroller LC only , the fi gure below illustrates a sampl e User Key Copy Setup Menu . The function is not available on the Controller SC .
212 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Status Men u pí~íìë=jÉåì The Stat us M en u provides basic system status information: Figure 5-56. S tatus Menu (sample) T o access the Statu s Me nu : • Press ST A TUS in the Keypad Section , or press {ST A TS} from va rious menus (such as the Key Menu ).
Encore Prese ntati on System • User’s Gu ide • Rev 04 213 5. Menu Orientation PIP Adjustment Menu mfm=^ÇàìëíãÉåí=jÉåì The following topics are di scussed in this sectio n: • PIP Ad.
214 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu mfm=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample PIP Adjustment Menu : Figure 5-58. PIP Adjustment Menu (sample) The PIP Adjustment Menu provides tools that enabl e you to adjust the “act ive” PIP .
Encore Prese ntati on System • User’s Gu ide • Rev 04 215 5. Menu Orientation PIP Adjustment Menu • Move Rate — adjusts the rate (in 0.1 second increments) for programmed PIP “moves” from keyframe to keyf rame. T o adjust, select the RA TE radio button and twist the Joystick Z-Axis knob.
216 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu `äçåÉ=pÉíìé=jÉåì From the PIP Adjustment Menu , press {CLONE} to display the Clone Setup Menu , a sample of which i s shown below. Figure 5-59.
Encore Prese ntati on System • User’s Gu ide • Rev 04 217 5. Menu Orientation PIP Adjustment Menu ~ Offset — both cloned images move together with a fixed pixel offset. For exampl e , if you ad j u st H Position , both images move left and right.
218 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu _çêÇÉê=jÉåì From the PIP Adjustment Menu , press {BORDR} to display the Bo r de r Menu . Figure 5-62. Border Menu (sample) The Border Menu enables you to add a border t o a PIP , and adjust its p arame ters.
Encore Prese ntati on System • User’s Gu ide • Rev 04 219 5. Menu Orientation PIP Adjustment Menu pÜ~Ççï=jÉåì From the PIP Adjustment Menu , press { SHDOW } to display the Shadow Menu . Figure 5-63. Shadow Menu (sample) The Shadow Me nu enables yo u place a sha dow behind a PI P .
220 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu fã~ÖÉ=bÑÑÉÅíë=jÉåì From the PIP Adjustment Menu (or the Key Menu ), press {EFX} to display the Image Effects Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 221 5. Menu Orientation PIP Adjustment Menu • Invert — enables you to invert all image colors. • Hue — adjusts the image’ s hue, by rotating color vectors thro ugh out the 360 degree color spectrum.
222 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu `ìëíçã=_çêÇÉê=jÉåì From the Border Menu , press {CUSTOM BORDER} to display the Custom Border Menu . Figure 5-65. Custom Border Menu (sample) The Custom Border Menu enables you to create and save custom bo rders.
Encore Prese ntati on System • User’s Gu ide • Rev 04 223 5. Menu Orientation PIP Adjustment Menu • PIP Soft Edge — adjusts the soft edge that is applie d between the live PIP data and the inner border .
224 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Key Menu hÉó=jÉåì The following topics are di scussed in this sectio n: • Key Menu T r ee • Key Menu Description • Key Menu Function s • Key Sub Menus hÉó=jÉåì=qêÉÉ The figure below ill ustra tes the Key Menu tree: Figure 5-66.
Encore Prese ntati on System • User’s Gu ide • Rev 04 225 5. Menu Orientation Key Menu hÉó=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample Key Menu , wh en Luma key is selected: Figure 5-67. Key Menu (sample) The Key Menu provides the tools to adjust the “active” key .
226 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Key Menu iìã~=hÉó=cìåÅíáçåë A Luma (luminance) key is one in which the hole-cutt i ng in formation is derived from the luminance (brightness) level of the key source.
Encore Prese ntati on System • User’s Gu ide • Rev 04 227 5. Menu Orientation Key Menu • Blue Color — adjusts the blue component of the key color , from 0 to 1024. • Red Threshold — adjusts the key’s clip along the Cyan vector (as demonstrated using a CIE color chip chart).
228 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Key Menu • Fill Source — permanently set to the current mixe r ’s Layer A (e.g., [1A] ). • Press { ST A TS } to display the Stat us M en u . Refer to the “ Statu s Me nu ” section on page 212 for details.
Encore Prese ntati on System • User’s Gu ide • Rev 04 229 5. Menu Orientation Key Menu • Blue — adjusts the blue component of the matte fill, from 0 to 1024. • Press { ST A TS } to display the Stat us M en u . Refer to the “ Statu s Me nu ” section on page 212 for details.
230 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Key Menu • V Position — indicates the Key’s position, relative to the vertica l cent er of the screen ( 00 ), as measured from the exact cen ter of the Key . Thus, the value 64 is 64 pixels above center .
Encore Prese ntati on System • User’s Gu ide • Rev 04 231 5. Menu Orientation Crop Menu `êçé=jÉåì With a PIP or a Key selected, press Crop to display the Crop Menu . Figure 5-70. Crop Menu (sample) The Crop Menu enables you crop the sides of a PIP or a Key witho ut affecting the size of the source image.
232 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Source Adjustment Menus pçìêÅÉ=^ÇàìëíãÉåí=jÉåìë Tw o s i m i l a r Source Adjustmen t Menus are available: • If a PIP is selected: a. Press SOURCE (in the Joystick Sectio n ) to display the Input Source Adjustment Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 233 5. Menu Orientation Source Adjustment Menus pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=qêÉÉë The figure below ill ustra tes the two Source Ad ju stment Menu T rees . Figure 5-71. Source Adjustment Menu Trees All functions and su b menus are discussed in th e fo llowing sections.
234 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Source Adjustment Menus pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample Input Source Adju stment Menu : Figure 5-72.
Encore Prese ntati on System • User’s Gu ide • Rev 04 235 5. Menu Orientation Source Adjustment Menus pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=cìåÅíáçåë The following Source Adjustment Menu functions are provided: • H Size — adjusts the source’s horizontal size.
236 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Source Adjustment Menus Source Jo ystick Func tions At the bottom of the Input Sou rce Ad justment Menu and t he Key Source Ad ju stm e nt Menu , four radio buttons assign the Joyst ick to various source adjustment functions.
Encore Prese ntati on System • User’s Gu ide • Rev 04 237 5. Menu Orientation Background Input Se tup Menu _~ÅâÖêçìåÇ=fåéìí=pÉíìé=jÉåì The BG (Background) Input Setup Menu enables you to select and define backg r ound sources A and B .
238 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Background Input Setu p Menu _~ÅâÖêçìåÇ=fåéìí=pÉíìé=jÉåì=qêÉÉ The figure below ill ustra tes the Backgrou nd Input Setup Menu T ree .
Encore Prese ntati on System • User’s Gu ide • Rev 04 239 5. Menu Orientation Background Input Se tup Menu pÜ~êÉÇ=_~ÅâÖêçìåÇ=jÉåì=cìåÅíáçåë The figure below illustra tes a sample BG Input Setup Menu , showing shared functions: Figure 5-75.
240 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Background Input Setu p Menu _~ÅâÖêçìåÇ=jÉåì=cìåÅíáçåë=Ô=j~ííÉ=qóéÉ The figure below illustra tes a sample BG Input Setup Menu when “ Matte ” is sele cted as the background type.
Encore Prese ntati on System • User’s Gu ide • Rev 04 241 5. Menu Orientation Background Input Se tup Menu _d=j~ííÉ=jÉåì From the BG Input Setup Menu , press { MA TTE } to ac cess the BG Matte Menu .
242 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Background Input Setu p Menu _~ÅâÖêçìåÇ=E~åÇ=aphF=jÉåì=cìåÅíáçåë=Ô=asf=qóéÉ The figure below ill ustrates a sample BG Input Setup Menu when “ DVI ” is selected as t he background type.
Encore Prese ntati on System • User’s Gu ide • Rev 04 243 5. Menu Orientation Background Input Se tup Menu _~ÅâÖêçìåÇ=E~åÇ=aphF=jÉåì=cìåÅíáçåë=Ô=^å~äçÖ=qóéÉ The figure below illustrates a samp le BG Input Setup Menu when “ Analog ” is select ed as the background type.
244 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Background Input Setu p Menu • Contrast — sets the input’ s contrast.
Encore Prese ntati on System • User’s Gu ide • Rev 04 245 5. Menu Orientation Frame Grab Menu cê~ãÉ=dê~Ä=jÉåì The following topics are di scussed in this sectio n: • Frame Grab Menu T .
246 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Frame Grab Menu cê~ãÉ=dê~Ä=lîÉêîáÉï The Encore system provides complete flexibility with regard to frame g.
Encore Prese ntati on System • User’s Gu ide • Rev 04 247 5. Menu Orientation Frame Grab Menu can capture into the sel ected frame store, save i t to permanent memory , or download a f rame grab from permanent storage f or use on-air.
248 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Frame Grab Menu cê~ãÉ=dê ~Ä=k~ãÉ=jÉåì The Frame Gr ab Name Menu enab les you to name a frame that has been saved to permanent memory . A customer-supplied PS/2 keyboard is required (which conne cts to the KEYBOARD port on the rear of the Controlle r).
Encore Prese ntati on System • User’s Gu ide • Rev 04 249 5. Menu Orientation Frame Grab Menu cê~ãÉ=bê~ëÉ=jÉåì The Frame Erase Menu enables you to permanently erase a selected fra me. This “destructive” process (which locks the c onsol e) takes from 20 to 30 seconds.
250 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Frame Grab Menu cê~ãÉ=p~îÉ=jÉåì The Frame Save Menu en ables you to save a selected frame grab into permanent memory in a selected register .
Encore Prese ntati on System • User’s Gu ide • Rev 04 251 5. Menu Orientation Frame Grab Menu cê~ãÉ=aÉäÉíÉ=jÉåì The Frame Delete Menu enables you to mark a selected permane nt frame as deleted — but the ERASE function i s still required for permanent deletion.
252 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Frame Grab Menu cê~ãÉ=oÉÅ~ää=jÉåì The Frame Recal l Menu enables you to recall a selected frame from permanent sto rage back into temporary memory .
Encore Prese ntati on System • User’s Gu ide • Rev 04 253 5. Menu Orientation DSK Menus aph=jÉåìë The following topics are di scussed in this sectio n: • DSK Menu T ree • DSK Adjustment Menu • DSK Input Setup Menu aph=jÉåì=qêÉÉ The figure below ill ustra tes the DSK Menu T ree .
254 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation DSK Menus aph=^ÇàìëíãÉåí=jÉåì The DSK Adjustment Menu provides the tools necessary to adjust the DSK (D ownstrea m Key . T o access the menu: • Press DSK in th e Layer Control Section .
Encore Prese ntati on System • User’s Gu ide • Rev 04 255 5. Menu Orientation DSK Menus • Gain — adjusts the sensiti vity of the keyer , enabling you to change t he sharpness of the keyed image. Gain only affects the key hole, as set by the clip.
256 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation DSK Menus • Blue Color — adjusts the blue component of the DSK colo r , from 0 to 1024. • Red Threshold — adjusts the DSK’s clip along the Cyan vector (as demonstrated using a CIE color chip chart).
Encore Prese ntati on System • User’s Gu ide • Rev 04 257 5. Menu Orientation DSK Menus aph=fåéìí=pÉíìé=jÉåì The figure below illustra tes a sample DSK Input Se tup Menu : Figure 5-94. DSK Input Setup Menu (sample) The DSK Input Setup Menu enables you to set up the DSK input.
258 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation DSK Menus ~ Analog — an analog graphic from a compu ter or other analog source is the DSK source. Refer to the “ Backgroun d (and DSK) Menu Functions — Analo g T ype ” section on page 243.
Encore Prese ntati on System • User’s Gu ide • Rev 04 259 SK==pó ëí Éã=p Éíìé få=qÜáë=`Ü~éíÉê This chapter provid es comprehensive instructi ons for setting up the Encore system.
260 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Setup Prerequisites pÉíìé=mêÉêÉèìáëáíÉë Before starting to set up y our Encore system, please review the following prerequisites: • Ensure that you are familiar with all Encore system hard ware.
Encore Prese ntati on System • User’s Gu ide • Rev 04 261 6. System Setup System Setup Seque nce póëíÉã=pÉíìé=pÉèìÉåÅÉ This section provides a top level view of the ent ire Encore set up procedure, plus links to each individual sequence.
262 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup ID Setup and Remote Enable fa=pÉíìé=~åÇ=oÉãçíÉ=bå~ÄäÉ= Encore system setup: Step 1 . In this procedure, you wil l set up individual Encore Video Processor IDs.
Encore Prese ntati on System • User’s Gu ide • Rev 04 263 6. System Setup ID Setup and Remote Enable b. Ensure that th e Image PRO is running software version 2.30 or greater . • T o verify , press SETUP > TECH SUPPORT to display the T ech Support Menu .
264 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Peripheral Power Up a nd Status Check mÉêáéÜÉê~ä=mçïÉê=ré=~åÇ=pí~íìë=`ÜÉÅâ Encore system setup: Step 2 . Use the following steps to power up your routers and check system status: 1.
Encore Prese ntati on System • User’s Gu ide • Rev 04 265 6. System Setup Peripheral Power Up and Stat us Check açïåäç~ÇáåÖ=`çÇÉ When an incompatibility exists between software code versions, all buttons wil l flash on the Controller console.
266 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Return to Factory De fault oÉíìêå=íç=c~Åíçêó=aÉÑ~ìäí Encore system setup: Step 3 . Prior to performing any setup proce dures, it is recommended that you perf orm a factory reset — in order to reset all router tables an d source mappings.
Encore Prese ntati on System • User’s Gu ide • Rev 04 267 6. System Setup Touch Screen Calibration qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå Encore system setup: Step 4 . The calibration proce dure is an excellent starting point prior to setu p.
268 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Programming EDID mêçÖê~ããáåÖ=bafa Encore system setup: Step 5 The EDID (Extended Display Iden ti fication Data) programming procedure is a prer equisite for background and DSK setup.
Encore Prese ntati on System • User’s Gu ide • Rev 04 269 6. System Setup Restore from Flash Memory Card oÉëíçêÉ=Ñêçã=cä~ëÜ=jÉãçêó=`~êÇ Encore system setup: Step 6 (op tional.
270 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Router Setup oçìíÉê=pÉíìé Encore system setup: S tep 7 S Prerequisite s — Ensure that you are familiar with the following menus: ~ Router Specification Menu . In Chapter 5, refer to t he “ Router Specification Menu ” section on page 19 0.
Encore Prese ntati on System • User’s Gu ide • Rev 04 271 6. System Setup Router Setup 15. T est communications: ~ For serial and Et hernet controlled rou ters, press {TEST COMM} .
272 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Router Setup St ack config urations — please note: ~ When using a ro uter with a single or wide screen “stack” confi.
Encore Prese ntati on System • User’s Gu ide • Rev 04 273 6. System Setup Router Setup e. Repeat step 19 to designate additional Aux outpu ts. 20. Press {BACK} to return to the Router Specificat ion Menu . 21. Repeat from ste p 6 for the next router that you wish to assign.
274 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup D/A Setup aL^=pÉíìé Encore system setup: S tep 8 S Prerequisite s — Ensure that you are familiar with the following menus: ~ Router Specification Menu . In Chapter 5, refer to t he “ Router Specification Menu ” section on page 19 0.
Encore Prese ntati on System • User’s Gu ide • Rev 04 275 6. System Setup Input Patching fåéìí=m~íÅÜáåÖ Encore system setup: S tep 9 S Prerequisite s — Ensure that you are familiar with the Input Source Patch Menu . In Chapter 5, refer to the “ Input Source Patch Menu ” section on page 188.
276 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Input Patching Use the following steps to patch inputs to specific source buttons: 1. In the System Keypad , press SYSTEM to display the System Menu . 2. Press {INPUT P A TCH} to display the Input Source Patch Menu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 277 6. System Setup Destination Setup aÉëíáå~íáçå=pÉíìé Encore system setup: S tep 10 In this procedure, you will set up the Encore system’s single and wide screen de stinations.
278 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Destination Setup This completes the proced ure for defining “standard” and “stack” destinations.
Encore Prese ntati on System • User’s Gu ide • Rev 04 279 6. System Setup Destination Setup pÅêÉÉåmolJff=aÉëíáå~íáçå=pÉíìé In this procedure, you will set up Screen PRO-II systems as single screen destinations. Once assigned, the associ at ed button(s) on the Desti nation Bus will be active.
280 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Destination Setup pÅêÉÉåmolJff=ïáíÜ=bl` The Enhanced O utp ut Card (EOC) is an optional (factory installed) card that provides additional output fo rmats, and expands the still store capabilities of ScreenPRO-II.
Encore Prese ntati on System • User’s Gu ide • Rev 04 281 6. System Setup AUX Destination Setup ^ru=aÉëíáå~íáçå=pÉíìé Encore system setup: Step 11 In this procedure, you will set up the system’s Aux (Auxiliary) destinations. S Prerequisite s — Ensure that you are familiar with the following menus: ~ Destination Setup Me nu .
282 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup AUX Destination Setup ^ìñ=aÉëíáå~íáçå=pÉíìé This section provides instructions for set ting up an Aux destination. Use the following steps to set up an Aux destinati on: 1.
Encore Prese ntati on System • User’s Gu ide • Rev 04 283 6. System Setup AUX Destination Setup fã~ÖÉmol=çê=mêÉmolJff=^ìñ=aÉëíáå~íáçå=pÉíìé This section provides instructions for set ting up ImagePRO Aux and PrePRO-II Aux destinations.
284 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup AUX Destination Setup 11 . In the SDI section: a. On the SDI Router Name lin e, select the rout er from which SDI sources will be routed to the Image PRO (or PrePRO-II).
Encore Prese ntati on System • User’s Gu ide • Rev 04 285 6. System Setup Output Format Setup lìíéìí=cçêã~í=pÉíìé Encore system setup: S tep 12 S Prerequisite s — Ensure that you are familiar with the Output Menu . In Chapter 5 , refer to the “ Output Menu Fu nc tio ns ” section on page 160.
286 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Sync Setup póåÅ=pÉíìé Encore system setup: S tep 13 S Prerequisite s — Ensure that you are familiar with the Settings Menu . In Chapter 5 , refer to the “ Settings Menu ” section on page 165.
Encore Prese ntati on System • User’s Gu ide • Rev 04 287 6. System Setup Genlock Setup dÉåäçÅâ=pÉíìé Encore system setup: S tep 14 S Prerequisite s — Ensure that you are familiar with the Genlock Menu . In Chapter 5 , refer to the “ Genlock Menu ” section on page 164.
288 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Projector Setup mêçàÉÅíçê=pÉíìé Encore system setup: S tep 15 S Prerequisite s — Ensure that you are familiar with the following: ~ Te s t P a t t e r n M e n u .
Encore Prese ntati on System • User’s Gu ide • Rev 04 289 6. System Setup Projector Setup 11 . Once the proje ctor is properly set, turn the Raster Box and the Mode off. 12. Press { BACK } to retur n to the Output Menu . 13. Repeat from ste p 2 for additional single screen dest ination projecto r set ups.
290 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Projector Setup 13. Scroll to the Marker Mode line and enable (o r disable) the system’s wide screen markers. If enabled, you can see the bound aries of active data on Previ ew .
Encore Prese ntati on System • User’s Gu ide • Rev 04 291 6. System Setup Background Setup _~ÅâÖêçìåÇ=pÉíìé Encore system setup: S tep 16 S Prerequisite s — Ensure that you are familiar with the following menus: ~ Background I nput Setup Menu .
292 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Background Setup f. Press { SA VE } . 5. T o configur e a frame grab b ackground: a. Ensure that you have captured frame (s) into temporary memory , or saved frame(s) into permanent memory .
Encore Prese ntati on System • User’s Gu ide • Rev 04 293 6. System Setup Input Setup fåéìí=pÉíìé Encore system setup: S tep 17 S Prerequisite s — Ensure that you are familiar with the Input Menu . In Chapter 5 , refer to the “ Input Men u ” section on page 148.
294 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Input Setup This action isolates the sou rce within the PIP , di splays a gray background, turns off borders and shadows, and displays t he Input Menu . 4. On the Source Selection Bus , select the source that you want to set u p.
Encore Prese ntati on System • User’s Gu ide • Rev 04 295 6. System Setup Input Setup • Scroll to the H Position line and set the start of the active area’s horizontal of fset from H sync. • Scroll to the V Active line and set t he number of vertic al lines in the image.
296 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup DSK Setup fåéìí=pÉíìé=kçíÉë Yo u do not have to repeat the input set up pro cedure for other destinatio ns if either of the following criteria are met: • Y our othe r destinations use sources tha t are patched to the same router .
Encore Prese ntati on System • User’s Gu ide • Rev 04 297 6. System Setup DSK Setup ~ For wide screen destinations on ly: •S e l e c t All to set up all the DSK on Processors. •S e l e c t t h e ID of an individual processor . 5. T o configure the DSK with no input: a.
298 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup DSK Setup 8. T o configure an Analog source as th e DSK: a. Ensure that your analog source is prop erly connected to the Video Processor chassis. In Appendix A, refer to the “ DVI-I Connector Pinout s ” section on page 370 for pinout details.
Encore Prese ntati on System • User’s Gu ide • Rev 04 299 6. System Setup Saving the Setup p~îáåÖ=íÜÉ=pÉíìé Encore system setup: S tep 19 When all system setup p rocedures have been co mplete, press SA VE in the System Keypad . This action saves the state of the Controller in non-vola til e memory .
300 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Back up System _~Åâ=ìé==póëíÉã Encore system setup: S tep 20 S Prerequisite s — Ensure that you are familiar with the Backup/Restore Menu . In Chapter 5, refer to the “ Backup/Restore Menu ” section on page 206 for details.
Encore Prese ntati on System • User’s Gu ide • Rev 04 301 T K==léÉê ~íáçåë få=qÜáë=`Ü~éíÉê This chapter includes operati onal instructions fo r all Encore modes and functio ns.
302 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Prerequisites mêÉêÉèìáëáíÉë Prior to reviewing this chapter , please ensure the followin g: • All system destinations are properly c onfigured. In Chapter 6, refer to the “ Destination Setup " section on page 27 7 fo r details.
Encore Prese ntati on System • User’s Gu ide • Rev 04 303 7. Operations Operational Conf iguration léÉê~íáçå~ä=`çåÑáÖìê~íáçå The following topics are di scussed in this sectio.
304 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Operational Configurat ion • Wide Sc reen Applic ation — For optimum viewing in all wide screen a pplications, place all Preview mo nito rs on the left, an d all Pro gra m mo ni to rs on th e ri gh t.
Encore Prese ntati on System • User’s Gu ide • Rev 04 305 7. Operations Operational Conf iguration qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå As an excellent p rerequisite to al l operatin g proced ures, it is recommended that you calibrate the T ouch Screen.
306 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Operational Configurat ion • Center Justified Ma rkers The figure below illustra tes the two Wide Screen Markers in a center justi fied configuration. Images between th e two vert ical gre en lines are projected.
Encore Prese ntati on System • User’s Gu ide • Rev 04 307 7. Operations Operational Conf iguration • Conversely , you’ll always know what PIPs and keys to you wish to clear — to visually remove elements FROM Program .
308 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Operational Configurat ion Remember that Raster Box size can be adjusted: 1. In the System Keypad , press OUTPUT to display the Output Me nu . 2. On the Destination Bus , select the destinatio n that you want to configur e.
Encore Prese ntati on System • User’s Gu ide • Rev 04 309 7. Operations Operational Conf iguration 7. On both Controll ers, under the Mix Key headi ng, select a custom transition rate for the Mix button (if desired).
310 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Using the Alphan umeric Keypad rëáåÖ=íÜÉ=^äéÜ~åìãÉêáÅ=hÉóé~Ç On the Co ntroller LC onl y , the Alphanumeric Keypad enables you to enter and change numeric fields (o n the T ouch Scre en) wi thou t ha ving to use a rotary knob.
Encore Prese ntati on System • User’s Gu ide • Rev 04 31 1 7. Operations Using the PS/2 Keyboard 4. For numeric fie lds with decimal p oints, the decimal point i s fixed: S T o enter 120.3 , press 1 , 2 , 0 , 3 , ENTER . 5. During the entry process, press CLEAR at any time t o delete the last nu mber entered.
312 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Groups tçêâáåÖ=ïáíÜ=dêçìéë A Group is a single button that represents a certain number of destinations, as programmed by the use r . For example , the Group 1 button can represent desti nation 1 or destinations 1 , 2 and 3 .
Encore Prese ntati on System • User’s Gu ide • Rev 04 313 7. Operations Working with Groups ^ÇÇáåÖ=çê=oÉãçîáåÖ=aÉë íáå~íáçåë=Ñêçã=~=dêçìé Use the follow ing steps to add (or re move) a destinat ion to/from an existing group: 1.
314 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Groups råäÉ~êåáåÖ=~=dêçìé Use the following steps to unlearn (complet ely clear) a group button — so t hat it no longer lights: 1. Controller LC: a.
Encore Prese ntati on System • User’s Gu ide • Rev 04 315 7. Operations Working with Destina tions tçêâáåÖ=ïáíÜ=aÉëíáå~íáçåë Destinations can be configured as sing le screens.
316 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Destina tio ns oçìíáåÖ=pçìêÅÉë=íç=^ìñ=aÉëíáå~íáçåë When using Aux destinations, remember that you are routing individual router input s to router outputs, which in turn are connect to other devices.
Encore Prese ntati on System • User’s Gu ide • Rev 04 317 7. Operations Working with Destina tions iáîÉ=pïáíÅÜ=^ìñ=oçìíáåÖ Use the following steps to switch Aux destinati ons live. 1. On the Destination Bus , enable the de sired Aux destinat ion(s).
318 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Destina tio ns sáÉïáåÖ=^ìñ=oçìíÉë Aux routes can be viewed ind i vidua lly , without affecting other routes current ly in effect. Use the following steps to view an Aux route: 1.
Encore Prese ntati on System • User’s Gu ide • Rev 04 319 7. Operations Working with Layers tçêâáåÖ=ïáíÜ=i~óÉêë The following topics are di scussed in this sectio n: • Switching .
320 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers • If a router is used for input connection, a source can be as signed to multip le layers simultaneously .
Encore Prese ntati on System • User’s Gu ide • Rev 04 321 7. Operations Working with Layers råÇÉêëí~åÇáåÖ=péäáí=~åÇ=jáñ=jçÇÉë Encore provides two different modes with whic.
322 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers ~ With To g g l e off, the source selected in Preview stays in Preview , once the transition is complete.
Encore Prese ntati on System • User’s Gu ide • Rev 04 323 7. Operations Working with Layers tçêâáåÖ=ïáíÜ=mfmë=áå=jáñ=jçÇÉ In Mix Mode , a mixer’s layers are ganged toget her .
324 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers 5. Crop — Press Crop (in the Joystick Section ) to display t he Crop Adjustme nt Menu . Select the type of crop , the aspect ratio, and the imag e’s H and V size.
Encore Prese ntati on System • User’s Gu ide • Rev 04 325 7. Operations Working with Layers tçêâáåÖ=ïáíÜ=hÉóë=áå=jáñ=jçÇÉ In Mix Mode , a mixer ’s layers are ganged together .
326 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers 8. Place your "cut" source on top of your "fill" source.
Encore Prese ntati on System • User’s Gu ide • Rev 04 327 7. Operations Working with Layers 8. Source Size — Press Source (in the Joystick Sect ion ) to display the Key Source Adjustment Menu . Adjust the source image’s size and position with in the Key .
328 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers jçÇáÑóáåÖ=i~óÉêë=lå=mêçÖê~ã Encore enables you to modify layers directly o n Program, without first setting up a "look" on Preview .
Encore Prese ntati on System • User’s Gu ide • Rev 04 329 7. Operations Working with Layer Functions tçêâáåÖ=ïáíÜ=i~óÉê=cìåÅíáçåë On each Controller , the Layer Functions Section and the T ransition Function Secti on provide numerous creati ve modes to en hance your pr esentation.
330 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layer Funct ions rëáåÖ=`äçåÉ== The Clone mode is designed for w idescreen configura tions only . It enables you to make an exact copy of a layer on to the opposite scre en.
Encore Prese ntati on System • User’s Gu ide • Rev 04 331 7. Operations Working with Layer Functions rëáåÖ=`çéó== The Copy functi on enables you to copy the properties of t he act ive PIP or Key to another PIP or Key — on the same (or different) mixer .
332 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layer Funct ions rëáåÖ=cêÉÉòÉ Use the followin g steps to freeze a layer ’s motion. Both PIPs and Keys can be frozen. 1. In the Layer Control Secti on , select the layer on Previe w that you wish to freeze.
Encore Prese ntati on System • User’s Gu ide • Rev 04 333 7. Operations Working with Layer Functions rëáåÖ=bñí=qêáÖÖÉê= The Ext T rigger function is only used wit h the Barco Event s Manager or Barco St age Manager applications.
334 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layer Funct ions 3. Using the Inpu t Menu , adjust the so urce in t he normal manner . 4. T o restore Preview to its previous setup, double-punch Sour ce Preview .
Encore Prese ntati on System • User’s Gu ide • Rev 04 335 7. Operations Working with Layer Functions rëáåÖ=gçáå=jçÇÉ Within a selected mixer , the " Join " mode enables you to lock laye rs A and B tog ether , such that they move as one and maintain a precise relationship.
336 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Using Move rëáåÖ=jçîÉ The following topics are di scussed in this sectio n: • Programming Move s • Pending and T .
Encore Prese ntati on System • User’s Gu ide • Rev 04 337 7. Operations Using Move mêçÖê~ã=~=jçîÉ=çå=mêçÖê~ã This mode enables you to program a move with the select ed layer on both Program and Preview — after the layer has transitioned to Program.
338 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Using Move mÉåÇ=çå=mêçÖê~ã This method enables you to trig ger th e move manual ly , with a layer already on Program. Use the following steps to pend a move on Program: 1.
Encore Prese ntati on System • User’s Gu ide • Rev 04 339 7. Operations Using Move • On screen, off screen — When progra mming moves, Encore lets you move a PIP or Key from an off-screen location to an on-screen location, and vice-versa. • Editing moves — Once a move property h as been defined, it can be edi ted: a.
340 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Live Modes tçêâáåÖ=ïáíÜ=iáîÉ=jçÇÉë The following topics are di scussed in this sectio n: • U.
Encore Prese ntati on System • User’s Gu ide • Rev 04 341 7. Operations Working with Li ve Modes Please note the following poi nts regarding the Live Switch Progr am/Preview Mode : • When switching directly on Program , the Con troller uses a predefined set of rules.
342 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Live Modes 5. T o clear the entire mode, press Shift + Source . The button turns off, and the entire Source Selection Bus is returned to its normal functi onal ity .
Encore Prese ntati on System • User’s Gu ide • Rev 04 343 7. Operations Working with Transiti ons tçêâáåÖ=ïáíÜ=qê~åëáíáçåë This section provides instructio ns for pe rforming a variety of transitions.
344 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Transit ions táéÉ All types of wipes can be performed on single screen destinations. On widescreen destinations, you ca n only perform a Wip e Up or a Wi pe Do wn .
Encore Prese ntati on System • User’s Gu ide • Rev 04 345 7. Operations Working with Preset s tçêâáåÖ=ïáíÜ=mêÉëÉíë This section provides detailed instructi ons for working with Presets. On the Controller , the Preset Section en abl es you to store and recall entire setups.
346 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Presets S Example 3 : Mix — No conflict. a. Enable Mix mode. b. S tore a Preset tha t con t ains Source 1 on Layer 1A . c. Ta k e Source 2 to Program on Layer 1A .
Encore Prese ntati on System • User’s Gu ide • Rev 04 347 7. Operations Working with Preset s oÉÅ~ääáåÖ=mêÉëÉíë Use the following steps to recall a preset: 1.
348 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Presets mêÉëÉíë=~åÇ=jçîÉë Encore’s Preset mode provides a unique " auto matic pend move &quo.
Encore Prese ntati on System • User’s Gu ide • Rev 04 349 7. Operations Layer and Aux Control i~óÉê=~åÇ=^ìñ=`çåíêçä AUX — Information to be provided.
350 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with User Keys tçêâáåÖ=ïáíÜ=rëÉê=hÉóë Encore’s User Key feature e nables you to se lect all (or a porti on) of the current layer ’s attributes (such as border colo r , size, effects, etc.
Encore Prese ntati on System • User’s Gu ide • Rev 04 351 7. Operations Working with Tallies tçêâáåÖ=ïáíÜ=q~ääáÉë The "T ally" function can be ena bled or disabled as requi red. Use the following steps to enable or disabl e tallies: 1.
352 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Enable/Disable Controller Lockou t bå~ÄäÉLaáë~ÄäÉ=`çåíêçääÉê=içÅâçìí This section provides instructio ns for lo cking and unlocking the Controll er .
Encore Prese ntati on System • User’s Gu ide • Rev 04 353 7. Operations Using Backup and Restore rëáåÖ=_~Åâìé=~åÇ=oÉëíçêÉ The Encore system enables you to backup and restore all (or a port ion) of the complete system configuration setup usi ng a customer supplied flash me mory card.
354 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Using Backup and Restore póëíÉã=oÉëíçêÉ Please note the following important poi nts regarding the "restore" function: • When restoring, you must have the same version of software installed in the Controller as was used to perform the backup.
Encore Prese ntati on System • User’s Gu ide • Rev 04 355 7. Operations Working with Frame Grabs tçêâáåÖ=ïáíÜ=cê~ãÉ=dê~Äë The following topics are di scussed in this sectio n: .
356 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Frame Grabs The following table illustrates the valid layers from which to capture DSK frames, depending on the num ber of M/Es in your system.
Encore Prese ntati on System • User’s Gu ide • Rev 04 357 7. Operations Working with Frame Grabs • Permanent Frame Stores — As standard, the Encore Video Processor has three permanent (non-volatile) f rame stores available. Please note: ~ Frames in permanent storage are not lost when the system is powered down.
358 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Frame Grabs ~ Background frames are captured into the "bott om" stack Processor: BG_FG_1 , BG_FG_2 or BG_FG_3 . ~ DSK frames are captured into the "top" stack Processor: DSK_FG_1 , DSK_FG_2 and DSK_FG_3 .
Encore Prese ntati on System • User’s Gu ide • Rev 04 359 7. Operations Working with Frame Grabs ~ For wide screen destinations on ly , sele ct All to capture across all Processors, or select the ID of an individual processor .
360 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Frame Grabs • Press YES to save the f rame. All front panel controls will be locked for up to three minutes. • Press NO to cancel the procedure. ~ In "ES" systems, the Exten ded Frame Save Menu appears.
Encore Prese ntati on System • User’s Gu ide • Rev 04 361 7. Operations Working with Frame Grabs bê~ëáåÖ=~åÇ=aÉäÉíáåÖ=cê~ãÉë Please remember the fol lowing rules regarding eras.
362 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with the DSK tçêâáåÖ=ïáíÜ=íÜÉ=aph Use the following steps to perform a downstream key: 1. Ensure that the DSK is prope rly set up, and the key " type " is selected on the DSK Input Setup Me nu .
Encore Prese ntati on System • User’s Gu ide • Rev 04 363 ^ K==péÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ This appendix provides detailed techni cal sp ecif ications for the Encore Presentation System.
364 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input Specifications fåéìí=péÉÅáÑáÅ~íáçåë= The table below lists Encore Video Processor input specifications.
Encore Prese ntati on System • User’s Gu ide • Rev 04 365 ^K==péÉÅáÑáÅ~íáçåë Input Specifica ti ons The table below lists Encore VPx input specifications.
366 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Output Spec ifications lìíéìí=péÉÅáÑáÅ~íáçåë= The table below lists Encore Presentation System outp ut specifications.
Encore Prese ntati on System • User’s Gu ide • Rev 04 367 ^K==péÉÅáÑáÅ~íáçåë Physical and Electrical Specifications mÜóëáÅ~ä=~åÇ=bäÉÅíêáÅ~ä=péÉÅáÑáÅ~íáçåë= The table below lists Encore Presentation Syst em physi c al and electrical specifications.
368 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Communications Specifications `çããìåáÅ~íáçåë=péÉÅáÑáÅ~íáçåë= The table below lists Encore Presentation System communications specifica tions.
Encore Prese ntati on System • User’s Gu ide • Rev 04 369 ^K==péÉÅáÑáÅ~íáçåë Pinouts máåçìíë= The following topics are di scussed in this sectio n: • DVI Connector Pinouts .
370 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Pinouts asfJf=`çååÉÅíçê=máåçìíë The figure below illustra tes the DVI-I connector: Figure A-2. DVI-I Connector The table below lists DVI-I Connector pinouts.
Encore Prese ntati on System • User’s Gu ide • Rev 04 371 ^K==péÉÅáÑáÅ~íáçåë Pinouts ^å~äçÖ=NRJéáå=a=`çååÉÅíçê The figure below illustra tes the analog 15-pin D connector: Figure A-3. Analog 15-pin D Connector The table below lists Analog 15-pin D connector pinouts.
372 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Pinouts bíÜÉêåÉí=`çååÉÅíçê The figure below illustra tes the Ethernet connector: Figure A-4. Ethernet Connector The table below lists Ethernet connector pinouts.
Encore Prese ntati on System • User’s Gu ide • Rev 04 373 ^K==péÉÅáÑáÅ~íáçåë Pinouts pÉêá~ä=`çååÉÅíçê The figure below illustra tes the Video Processor ’s Serial connector , and the Ext Comm and Console connectors on both Controller mo dels.
374 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Pinouts q~ääó=`çååÉÅíçê Each Encore Controller provides one 25-pin D connecto r for issuing tally “relay closure” commands to external devices.
Encore Prese ntati on System • User’s Gu ide • Rev 04 375 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons fåéìí=~åÇ=lìíéìí=oÉëçäìíáçåë The tables on the following pages provide comprehensive li sts of available input and output resolutions.
376 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons 920x1200 @60 1024x768 @47.95 1024x768 @48 1024x768 @50 1024x768 @59.94 1024x768 @60 1024x768 @70 1024x768 @71.93 1024x768 @72 1024x768 @75 1024x768 @85 1 152x864 @75 1280x1024 @47.
Encore Prese ntati on System • User’s Gu ide • Rev 04 377 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons 1280x800 @60 1280x800 @60 1280x800 II @60 1280x800 II @60 1280x960 @50 1280x960 @59.94 1280x960 @60 1280x960 @85 1360x768 @60 1360x768 @60 1364x1024 @47.
378 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons 1536x768 @59.94 1600x1200 @47.95 1600x1200 @48 1600x1200 @50 1600x1200 @59.94 1600x1200 @60 1680x1050 @60 1680x1050 @60 1680x1050 @60 1920x1080i @50 1920x1080i @59.
Encore Prese ntati on System • User’s Gu ide • Rev 04 379 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons lìíéìí=oÉëçäìíáçåë Output resolut ions are liste d below . Each entry lists Format @Fv (Hz) . 2048x1080p @59.94 2048x1080p @60 2048x1080p II @50 2048x1200 @59.
380 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons 1280x1024 @48 1280x1024 @50 1280x1024 @59.94 1280x1024 @60 1280x1024 @71.93 1280x1024 @72 1280x1024 @75 1280x720 @60 1280x720 II @60 1280x720p @48 1280x720p @50 1280x720p @59.
Encore Prese ntati on System • User’s Gu ide • Rev 04 381 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons 1400x1050 @48 1400x1050 @50 1400x1050 @59.94 1400x1050 @60 1400x1050 @75 1440x900 @60 1440x900 @75 1440x900 @85 1536x768 @50 1536x768 @59.
382 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons 1920x1200 @59.94 1920x1200 @60 2048x1080p @48 2048x1080p @50 2048x1080p @59.94 2048x1080p @60 2048x1080p II @50 2048x1200 @59.94 2048x512p @59.
Encore Prese ntati on System • User’s Gu ide • Rev 04 383 _K==` çåí ~Å í=fåÑ çê ã~íáçå få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appendix: • Wa r r .
384 Encore Presentation System • User ’s Guide • Rev 04 _K==`çåí~Åí=fåÑçêã~íáçå Contact Informat io n `çåí~Åí=fåÑçêã~íáçå Barco, Inc. 1 1 101 T rade Center Drive Rancho C ordova, Cal ifornia 9 5670 USA • Phone: (91 6) 859-2500 • Fax: (916) 859-2515 • Website: www .
Encore Prese ntati on System • User’s Gu ide • Rev 04 385 `K==réÖê ~ÇáåÖ=pçÑí ï ~ê É få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appendix: • Software U.
386 Encore Presentation System • User ’s Guide • Rev 04 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Software Upgrade Overview pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï Firmware files for the Encore Presen tation System are loaded into the hardware at power- up.
Encore Prese ntati on System • User’s Gu ide • Rev 04 387 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Downloading Software açïåäç~ÇáåÖ=pçÑíï~êÉ T wo dif ferent methods can be us ed to dow.
388 Encore Presentation System • User ’s Guide • Rev 04 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Serial Upgrade Metho d 6. When the Fi le Downloa d Dialog ap pears, click Sa ve to save the file to your computer . 7. When the Save As Dialog appears, navigate t o the target folder and click Save .
Encore Prese ntati on System • User’s Gu ide • Rev 04 389 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Serial Upgrade Method 7. T o verify communications betwe en the PC and the Controller: a. In the Flash Loader , click in the b lack terminal win dow area.
390 Encore Presentation System • User ’s Guide • Rev 04 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrade Method bíÜÉêåÉí=réÖê~ÇÉ=jÉíÜçÇ Use the following steps to upgrade Encore software using an Etherne t conn ection to your PC: 1.
Encore Prese ntati on System • User’s Gu ide • Rev 04 391 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrad e Method you cannot connect, refer to the “ T rou bleshooting Eth ernet Communic ation ” section on page 391. 10. T o upl oad files to the Controller , click " Open script file to read and upload .
392 Encore Presentation System • User ’s Guide • Rev 04 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrade Method e. On the command promp t li n e , ty pe : ping 192.
Encore Prese ntati on System • User’s Gu ide • Rev 04 393 aK==tçê âáåÖ=t áíÜ=aÉ ë íáå~íáçåë få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appendix: .
394 Encore Presentation System • User ’s Guide • Rev 04 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ScreenPRO-II Configurations fåíÉêå~ä=oçìíÉê=`çåÑáÖìê~íáçå The diagram below illustrates an Encore config uration that uses two ScreenPRO-II units with internal source ro uting.
Encore Prese ntati on System • User’s Gu ide • Rev 04 395 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ScreenPRO-II Co n fig ur ations bñíÉêå~ä=pÉêá~ä=oçìíÉê=`çåÑáÖìê~íáçå The diagram below shows a configuratio n that uses two ScreenPRO-II uni ts with external source routing.
396 Encore Presentation System • User ’s Guide • Rev 04 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ScreenPRO-II Configurations bñíÉêå~ä=bíÜÉêåÉí=oçìíÉê=`çåÑáÖìê~íáçå The diagram below shows a configuratio n that uses two ScreenPRO-II uni ts with external source routing.
Encore Prese ntati on System • User’s Gu ide • Rev 04 397 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ScreenPRO-II Co n fig ur ations bñíÉêå~ä=pÉêá~ä=~åÇ=bíÜÉêåÉí=oçìíÉê=`çåÑáÖìê~íáçå The diagram below shows a configuratio n that uses two ScreenPRO-II uni ts with external source routing.
398 Encore Presentation System • User ’s Guide • Rev 04 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë PresentationPRO-II Aux Configuration mêÉëÉåí~íáçåmolJff=^ìñ=`çåÑáÖìê~íáçå PresentationPRO-II units can be connected to the Encore Contro ller via Ethernet for use as Aux destinations.
Encore Prese ntati on System • User’s Gu ide • Rev 04 399 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ImagePRO Aux Configurati on fã~ÖÉmol=^ìñ=`çåÑáÖìê~íáçå ImagePRO units can be connected to the Encore Controller via Ethernet f or use as Aux destinations.
400 Encore Presentation System • User ’s Guide • Rev 04 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ImagePRO Aux Confi guration.
Encore Prese ntati on System • User’s Gu ide • Rev 04 401 bK==^ ééäáÅ~íáçå=kçí É ë få=qÜáë=^ééÉåÇáñ The following applica tion notes are provided in this Appendix: • En.
402 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Connecti ons båÅçêÉ=`çåíêçääÉê=íç=oçìíÉê=`çååÉÅí.
Encore Prese ntati on System • User’s Gu ide • Rev 04 403 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Conn ecti ons buq=`ljj=máåçìíë The table below illustrates the pin outs on Encore's EXT COMM serial conne ctor . Figure E-1.
404 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Connecti ons `~ÄäÉ=`çååÉÅíáçå=Ô=píê~áÖÜí=qÜêçìÖÜ The table below illustrates the required pi n connections for typical Encore-to-Ro uter configurations.
Encore Prese ntati on System • User’s Gu ide • Rev 04 405 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Conn ecti ons `~ÄäÉ=`çååÉÅíáçå=Ô=kìää=jçÇÉã The table below illustrates the requ ired pi n connections for alternate Encore-to-Router configurations (such as to Extron router s).
406 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Connecti ons i~åíêçåáñ=bíÜÉêåÉí=íç=pÉêá~ä=`~ÄäÉ=`ç.
Encore Prese ntati on System • User’s Gu ide • Rev 04 407 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Conn ecti ons oçìíÉê=`çååÉÅíáçå=q~ÄäÉ The table below illustrates nu me rous notes and cable requ irements, when conn ecti ng Encore to vari ous routers.
408 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Connecti ons . . ISIS 3 … when connecting to En core Controller 3 … when connecting to Lantronix If required, try reversing null modem cable vs.
Encore Prese ntati on System • User’s Gu ide • Rev 04 409 bK==^ééäáÅ~íáçå=kçíÉë Router Interface Notes oçìíÉê=fåíÉêÑ~ÅÉ=kçíÉë For selected third party routers, additiona l int erface information is provided below.
410 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Router Interf ace Notes Password to be en tered. The Controller does th is aut omatically when attempti ng to connect to the rout er by usi ng the default factory account .
Encore Prese ntati on System • User’s Gu ide • Rev 04 41 1 fåÇÉ ñ pçÑíâ Éóë {ADD NEW} . . . . . . . . . . . . . . . . . . . . . . . . . . 191 {ADD P A TCH} . . . . . . . . . . . . . . . . . . . . 189, 194 {ADD} . . . . . . . . . . . .
412 Encore Presentation System • User ’s Guide • Rev 04 Index {TEST COMM} . . . . . . . . . . . . . . . . . . . . . . . . 192 {TEST LINKS} . . . . . . . . . . . . . . . . . . . . . . . . 178 {TEST P A TTERN} . . . . . . . . . 160, 161, 16 6, 169 {TRACK SIZ E} .
Encore Prese ntati on System • User’s Gu ide • Rev 04 413 Index Barco backup and restore utility . . . . . . . . . . . . . 33 conta ct informat ion . . . . . . . . . . . . . . . . . 383 Events Manager . . . . . . . . . . . . . . . . 22, 143 Folsom W arranty .
414 Encore Presentation System • User ’s Guide • Rev 04 Index DVI-I connectors . . . . . . . . . . . . . . . . . . . . 56 HD/SDI input s . . . . . . . . . . . . . . . . . . . . . . 56 left just ified . . . . . . . . . . . . . . . . . . . . . . .
Encore Prese ntati on System • User’s Gu ide • Rev 04 415 Index touch screen section . . . . . . . . . . . . . . . 108 transition fun ction section . . . . . . . . . . . . 1 10 transition sectio n . . . . . . . . . . . . . . . . . . 1 10 user key s ection .
416 Encore Presentation System • User ’s Guide • Rev 04 Index ScreenPRO-II . . . . . . . . . . . . . . . . . . . . . . 27 ScreenPRO-II configurations . . . . . . . . . 393 ScreenPRO-II, external rout er 395 , 39 6, 397 ScreenPRO-II, internal router .
Encore Prese ntati on System • User’s Gu ide • Rev 04 417 Index triple mixer . . . . . . . . . . . . . . . . . . . . . . . . 31 Electrical spec ifications . . . . . . . . . . . . . . . . . 367 EMPT Y . . . . . . . . . . . . . . . . . . . . . . .
418 Encore Presentation System • User ’s Guide • Rev 04 Index output s . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 setup outp ut . . . . . . . . . . . . . . . . . . . . . . 285 Frame gr ab . . . . . . . . . . . . . . . . . . . . . .
Encore Prese ntati on System • User’s Gu ide • Rev 04 419 Index back up system to flash memory . . 300, 353 calibrate touch scre en . . . . . . . . . . 267, 30 5 capture frame from a layer . . . . . . . . . . . 358 capture frame from background input .
420 Encore Presentation System • User ’s Guide • Rev 04 Index Hue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Hyperlinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 f ID all . . . . . . . . . . . . . . . . .
Encore Prese ntati on System • User’s Gu ide • Rev 04 421 Index functions, c ut + fill . . . . . . . . . . . . . . . . . . 227 functions, lu ma . . . . . . . . . . . . . . . . . . . . 226 joystick function s . . . . . . . . . . . . . . . . . . 230 menu .
422 Encore Presentation System • User ’s Guide • Rev 04 Index DVI input A co nnector . . . . . . . . . . . . . . . 52 DVI input A co nnector (VPx) . . . . . . . . . . 54 DVI input B co nnector . . . . . . . . . . . . . . . 53 DVI input B co nnector (VPx) .
Encore Prese ntati on System • User’s Gu ide • Rev 04 423 Index RS-232 setup . . . . . . . . . . . . . . . . . . . . . 192 settings . . . . . . . . . . . . . . . . . . . . . . . . . . 165 shadow . . . . . . . . . . . . . . . . . . . . . . . . . .
424 Encore Presentation System • User ’s Guide • Rev 04 Index Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Number of input s . . . . . . . . . . . . . . . . . . . . . . . . . 191 of outpu ts . . . . . . . . . . . . . .
Encore Prese ntati on System • User’s Gu ide • Rev 04 425 Index m Page but ton . . . . . . . . . . . . . . . . . . . . . . 124, 1 44 Parity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 Patch input s . . . . . . . . . . . . .
426 Encore Presentation System • User ’s Guide • Rev 04 Index HD/SDI input A conn ector . . . . . . . . . . . . 52 HD/SDI input B conn ector . . . . . . . . . . . . 53 M/E connectors . . . . . . . . . . . . . . . . . 47, 52 preview out analog connecto r .
Encore Prese ntati on System • User’s Gu ide • Rev 04 427 Index Return material authorization . . . . . . . . . . . . . 383 RGB sources . . . . . . . . . . . . . . . . . . . . . . . . . 157 RMA . . . . . . . . . . . . . . . . . . . . . . . . . .
428 Encore Presentation System • User ’s Guide • Rev 04 Index software upgrade met hod . . . . . . . . . . . . 388 Set user preferences . . . . . . . . . . . . . . . . . . . 308 Settings m enu descriptio n . . . . . . . . . . . . . . . 165 Setup Aux destinati on .
Encore Prese ntati on System • User’s Gu ide • Rev 04 429 Index S plit button . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 mode . . . . . . . . . . . . . . . . . . . . . . . 130, 321 mode, understanding . . . . . . . . . . . . . . .
430 Encore Presentation System • User ’s Guide • Rev 04 Index T rademar ks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 T ransition backgrounds . . . . . . . . . . . . . . . . . . . . . . 320 cut . . . . . . . . . . . . . . . . . . .
Encore Prese ntati on System • User’s Gu ide • Rev 04 431 Index processing, image overlap . . . . . . . . . . . 100 processing , projector setup . . . . . . . . . . 101 processor . . . . . . . . . . . . . . . . . . . . . . . . . 24 processor (VP) input specifications .
432 Encore Presentation System • User ’s Guide • Rev 04 Index.
Een belangrijk punt na aankoop van elk apparaat Barco 26-0313000-00 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Barco 26-0313000-00 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Barco 26-0313000-00 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Barco 26-0313000-00 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Barco 26-0313000-00 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Barco 26-0313000-00 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Barco 26-0313000-00 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Barco 26-0313000-00 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
