Gebruiksaanwijzing /service van het product 26-0405000-00 van de fabrikant Barco
Ga naar pagina of 166
rëÉêÛë=dìáÇÉ mê É ëÉ åí ~íáçåm o lJff » • Manual # 26-0405 000-00 • Revision A.
ii PresentationPRO-II • User ’s Guide mêÉëÉåí~íáçåmolJff » = √ =rëÉêÛë=dìáÇÉ `çéóêáÖÜí © Barco, Inc. November 17, 2005 All rights reserved.
Present ationPRO-II • User’s Guide iii agreed upon in the contract, al l guarantee claims of the purchaser will be rendered inva lid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry prov id ed by the purchaser , e.
iv PresentationPRO-II • User ’ s Gu ide léÉê~íçêë=p~ÑÉíó=pìãã~êó The general safety informa tio n in this summary is for operating personnel. aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë There are no user-serviceable parts within the unit.
Present ationPRO-II • User’s Guide v qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=j~êâáåÖ= t^okfkd Highlights an operating procedure, practice, condit ion, statement, etc., wh ich, if not strictly observed, could result in injury to or death of personnel.
vi PresentationPRO-II • User ’s Guide `Ü~åÖÉ=eáëíçêó The table below lists the changes to the PresentationPRO-II User ’s Guide. T able 0-1.
Present ationPRO-II • User’s Guide vii q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=N fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K= N Chapter Structure . . . . . . . . . . . . . . . .
viii PresentationPRO-II • User ’s Guide Table of Contents `Ü~éíÉê=Q jÉåì=lêáÉåí~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=OT In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . .
Present ationPRO-II • User’s Guide ix Table of Conte nts Input Source Adjustment Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Input Source Adjustment Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Input Source Adjustment Menu Description .
x PresentationPRO-II • User ’s Guide Table of Contents Working with Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Transitioning a Key to Program . . . . . . . . . . . . . . . . . . . . . . 105 Removing a Key from Program .
Present ationPRO-II • User’s Guide xi Table of Conte nts Return Material Authorization (R MA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Contact Infor mation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xii PresentationPRO-II • User ’ s Gu id e Table of Contents.
Present ationPRO-II • User’s Guide 1 N K==fåíê çÇìÅ íáçå This chapter is designed to introduce you to the PresentationPRO-II. Areas to be covered are: • Chapter Structure • How to U.
2 PresentationPRO-II • User ’s Guide NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëÉ=qÜáë=dìáÇÉ Following are important tips for streamlining your use of this User’s Guide in its electronic “PDF” form. k~îáÖ~íáåÖ Use Acrobat Reader ’s “bookmarks” to navigate to the desired location.
Present ationPRO-II • User’s Guide 3 NK==fåíêçÇìÅíáçå Terms and Definiti ons qÉêãë=~åÇ=aÉÑáåáíáçåë The following terms and defini ti ons are used throughout this guide: • A “ Background ” is an unscal ed source, typ ically originating from a computer .
4 PresentationPRO-II • User ’s Guide NK==fåíêçÇìÅíáçå System Overview póëíÉã=lîÉêîáÉï The following topics are discu ssed in this section: • PresentationPRO-II High Perfor.
Present ationPRO-II • User’s Guide 5 NK==fåíêçÇìÅíáçå System Overview • Low video processing delay , less than 3 input fields • Capture and storage of still frames fo r use as a bac.
6 PresentationPRO-II • User ’s Guide NK==fåíêçÇìÅíáçå System Overview ^=tçêÇ=^Äçìí=i~óÉêë PresentationPRO-II is a three layer system, but because the DVI input is shared between Background and DSK (and only one ca n be used at a time), the allocation of the layers is still very flexible: Figure 1-1.
Present ationPRO-II • User’s Guide 7 NK==fåíêçÇìÅíáçå System Overview A layer is defined as an image display elemen t (such as a backgroun d, PIP or Key) with an associated visual priority . The mixer itself has one layer , which can be assigned to either PIP or Key functionali ty .
8 PresentationPRO-II • User ’s Guide NK==fåíêçÇìÅíáçå System Overview bÑÑÉÅí=`çãÄáå~íáçåë This section illustrates the many (but not all) combinati ons of ima ge effects that you can create on the PresentationPRO-II.
Present ationPRO-II • User’s Guide 9 NK==fåíêçÇìÅíáçå System Overview jáñÉê=bÑÑÉÅí=P In this effect, because the DSK is in use, the backg round must be configured as a ma tte color . Here, you can tr ansi tion the DSK over a scaled PIP and the ba ckground matte.
10 PresentationPRO-II • User ’s Guide NK==fåíêçÇìÅíáçå System Overview jáñÉê=bÑÑÉÅí=S In this effect, the background is con fi gured as a matte color .
Present ationPRO-II • User’s Guide 1 1 O K = = e ~ êÇï~ êÉ = l êá É å í ~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides detailed information ab out the PresentationPRO-II’s hardware.
12 PresentationPRO-II • User ’s Guide 2. Hardware Orientation PresentationPRO-II Re ar Panel mêÉëÉåí~íáçåmolJff=oÉ~ê=m~åÉä The figure below illustra tes the PresentationPRO-II rear panel: Figure 2-1. PresentationPRO-II Rear Panel Following are descript ions of each rear panel connector and section.
Present ationPRO-II • User’s Guide 13 2. Hardware Orientation Presentatio nPRO-II Re ar Panel 3) Background/D SK Inp ut One DVI conne ctor is provided fo r a Background or a DSK Input .
14 PresentationPRO-II • User ’s Guide 2. Hardware Orientation PresentationPRO-II Re ar Panel ^å~äçÖ=fåéìí=cäÉñáÄáäáíó Each analog input connector accepts a variety of analog formats including VGA, low- resolution composite video, S-video and YUV component video.
Present ationPRO-II • User’s Guide 15 2. Hardware Orientation Presentatio nPRO-II Fr ont Panel mêÉëÉåí~íáçåmolJff=cêçåí=m~åÉä The figure below illustra tes the PresentationPRO-II front panel: Figure 2-1.
16 PresentationPRO-II • User ’s Guide 2. Hardware Orientation Use of Color rëÉ=çÑ=`çäçê Color plays an important “visual ” role with t he PresentationPRO-II’s front panel buttons: White buttons are used for sources. Ye l l o w buttons are used for functions and modes.
PresentationPRO-II • User ’ s Guide 17 2. Hardware Orientation Front Panel Sections qçìÅÜ=pÅêÉÉå=jÉåì=pÉÅ íáçå The figure below ill ustra tes the T ouch Screen Menu Section . A sample menu is also shown for reference. Figure 2-3.
18 PresentationPRO-II • User ’s Guide 2. Hardware Orientation Front Panel Sections ~ The Bottom knob is used to adjust the adj acent parameter , as labeled on the T ouch Screen. pçìêÅÉ=pÉäÉÅíáçå=_ìë The figure below ill ustra tes the Source Selec tion Bus .
PresentationPRO-II • User ’ s Guide 19 2. Hardware Orientation Front Panel Sections i~óÉê=cìåÅíáçåë=pÉÅíáçå The figure below ill ustra tes the Layer F unctions Secti on .
20 PresentationPRO-II • User ’s Guide 2. Hardware Orientation Front Panel Sections LOGO — press to pend a LOGO transition or select the LOGO source. The button blin ks when selected and the Logo Inpu t Setup Menu appears on the T ouch Scre e n .
PresentationPRO-II • User ’ s Guide 21 P K = = e ~ êÇï~ êÉ = f å ë í~ ä ä ~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provid es comprehensive installa ti on instructions for the PresentationPRO-II system’s hardware.
22 PresentationPRO-II • User ’s Guide 3. Hardware Installation Safety Precautions p~ÑÉíó=mêÉÅ~ìíáçåë= For all PresentationPRO-II installation procedures, please observe the following .
PresentationPRO-II • User ’ s Guide 23 3. Hardware Installation Cable and Adapter Info rmation • Rack mount each PresentationPRO-II chassis from the front rack ears using four rack screws (not supplied). Rack thre ads may be metric or otherwise — depending upon the rack type.
24 PresentationPRO-II • User ’s Guide 3. Hardware Installation Input Connection Cha rt fåéìí=`çååÉÅíáçå=`Ü~êí= The following Input Connection Chart is provided to assist with your connections.
PresentationPRO-II • User ’ s Guide 25 3. Hardware Installation Installation fåëí~ää~íáçå The figure below ill ustrates a block diagram of a basi c Present ationPRO-II system. This diagram can be used as reference in th e following installation procedure.
26 PresentationPRO-II • User ’s Guide 3. Hardware Installation Installation 4. If you are rack mounting the PresentationPRO-II chassis, follow the rack mount procedures as outlined in the “ Rack-Mount Inst allation ” section on page 22.
PresentationPRO-II • User ’ s Guide 27 QK==jÉåì=lê áÉ åí ~íáçå få=qÜáë=`Ü~éíÉê This chapter describes all PresentationPRO-II system menu s, including how they are accessed, the functions that are available, and simple descrip tions of each menu tree (i n block diagram forma t).
28 PresentationPRO-II • User ’s Guide 4. Menu Orientation Home Menu eçãÉ=jÉåì The figure below ill ustra tes the Home Menu : Figure 4-1. Home Menu The Home Menu is the syst em’s top level menu, from which all other menus can be accessed. T o access a menu, press t he desired button on t he touch screen.
PresentationPRO-II • User ’ s Guide 29 4. Menu Orientation Input Menu fåéìí=jÉåì The following topics are di scussed in this section: • Input Menu T ree • Input Menu Descr iption • Input Menu Functions • Input Pre and Su b Menus fåéìí=jÉåì=qêÉÉ The figure below ill ustra tes the Input Menu tree: Figure 4-2.
30 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Input Menu fåéìí=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample Input Menu : Figure 4-3. Input Menu (sample) The Input Menu is used to adjust all parameters relating to inputs.
PresentationPRO-II • User ’ s Guide 31 4. Menu Orientation Input Menu In Appendix A, refer to the “ Input and O utput Resolu tions “ section on page 129 for additional details regarding resol utions. • Input T ype — sets the type o f input connected t o the PresentationPRO-II, such as RGB, SD, HD or Composite.
32 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Input Menu • Press { CFG } to display the Input Configurat ion Menu . Refer to the “ Input Configura tio n Men u ” sect ion on page 34 for details. • Press { AR } to display the Aspect Ratio Menu .
PresentationPRO-II • User ’ s Guide 33 4. Menu Orientation Input Menu fåéìí=^Åèìáëáíáçå=jÉåì The figure below illustra tes a “pre” menu — the Input Ac quisition Me nu . Figure 4-4. Input Acquisition Menu : No File Saved (sample) There are two situat ions in which the Inpu t Acquisition Menu can a ppear: 1.
34 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Input Menu In this situatio n, the followin g actions are recommend ed: • Check all cable connection s for the selected input. • With a connection established, press { F ORCE ACQUIRE } to perform the optim um image setup and automatically displ ay the Input Menu , or .
PresentationPRO-II • User ’ s Guide 35 4. Menu Orientation Input Menu páòáåÖ=jÉåì From the Input Menu , press { SIZING } to display one of t wo Sizing Menus . These menus are context sensitive — they cha nge depending o n the Sampling Mode selected on the Input Men u .
36 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Input Menu lîÉêë~ãéäÉ=páòáåÖ=jÉåì The figure below illustra tes a sample Oversample Sizing Menu .
PresentationPRO-II • User ’ s Guide 37 4. Menu Orientation Input Menu `çäçê=_~ä~åÅÉ=jÉåì From the Input Menu , press { COLOR BALANCE } to display the Colo r Ba l an ce Men u , a sample of which i s shown below . Figure 4-9. Color Bala nce Menu (sample) The Color Balance Menu changes depending on the selected Input T ype .
38 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Input Menu ^ëéÉÅí=o~íáç=jÉåì From the Input Menu , press { AR } to display the Aspect Ratio Menu , a sample of which is shown below .
PresentationPRO-II • User ’ s Guide 39 4. Menu Orientation Output Menu lìíéìí=jÉåì The following topics are di scussed in this section: • Output Menu T ree • Output Menu Description • Output Menu Functions • Output Sub Menus lìíéìí=jÉåì=qêÉÉ The figure below ill ustra tes the Output Menu tree: Figure 4-1 1.
40 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Output Menu lìíéìí=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample Output Menu : Figure 4-12. Output Menu (sample) The Output Menu enables you to configure PresentationPRO-II’s outputs, including the ability to show test patterns.
PresentationPRO-II • User ’ s Guide 41 4. Menu Orientation Output Menu lìíéìí=pìÄ=jÉåìë The following sub menus can be accessed f ro m the Output Menu : • Settings Menu • Te s t P a t t e r n M e n u pÉííáåÖë=jÉåì From the Output Menu , press { SETTINGS } to display the Settings Menu , a sample of which is shown below .
42 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Output Menu qÉëí=m~ííÉêå=jÉåì From the Output Menu , press { TEST P A TTERN } to display the T est Pattern Menu , a sample of which i s shown below .
PresentationPRO-II • User ’ s Guide 43 4. Menu Orientation System Menu póëíÉã=jÉåì The following topics are di scussed in this section: • System Menu T ree • System Menu Descripti on • System Menu Functions • System Sub Menus póëíÉã=jÉåì=qêÉÉ The figure below ill ustra tes the System Menu tree: Figure 4-15.
44 Present ationPRO-II • Us er ’ s Guide 4. Menu Orientation System Menu póëíÉã=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample System Menu : Figure 4-16. System Menu (sample) The System Menu enables you to configure Pre sentationPRO-II using various functions and sub menus.
PresentationPRO-II • User ’ s Guide 45 4. Menu Orientation System Menu póëíÉã=pìÄ=jÉåìë The following sub menus can be accessed f ro m the System M enu : • Diagnostics Setup Menu • .
46 Present ationPRO-II • Us er ’ s Guide 4. Menu Orientation System Menu oçí~êó=båÅçÇÉê=jÉåì From the Diagnostics Setup Menu , press { ROT ARY ENCODER } to display the Rotary Encoder Menu , a sample of which is shown be low. Figure 4-18.
PresentationPRO-II • User ’ s Guide 47 4. Menu Orientation System Menu hÉó=aÉíÉÅí=jÉåì From the Diagnostics Setup Menu , press { KEY DETECT } to display the Key Detect Menu , a sample of which is shown be low.
48 Present ationPRO-II • Us er ’ s Guide 4. Menu Orientation System Menu oÉëÉí=jÉåì From the System Menu , press { RESET } to display the Reset Menu : Figure 4-20. Reset Menu The Reset Menu enables you to perform various syst em reset functions.
PresentationPRO-II • User ’ s Guide 49 4. Menu Orientation System Menu pçÑíï~êÉ=sÉêëáçå=jÉåì From the System Menu , press { SW VER } to display the Sof tware V ersio n Menu , a sample of which i s shown below .
50 Present ationPRO-II • Us er ’ s Guide 4. Menu Orientation System Menu `çåëçäÉ=mçêí=pÉíìé=jÉåì From the System Menu , press { CONSOLE } to display the C onsole Port Setup Menu , a sample of which i s shown below .
PresentationPRO-II • User ’ s Guide 51 4. Menu Orientation System Menu bafa=asf=fåéìí=cçêã~í=jÉåì From the System Menu , press { EDID } to display the EDID DVI Input Format Me nu , a sample of which i s shown below .
52 Present ationPRO-II • Us er ’ s Guide 4. Menu Orientation System Menu qÉÅÜåáÅ~ä=pìééçêí=jÉåì From the System Menu , press { TECH SUPPORT } to display the T echnical Support Menu : Figure 4-24.
PresentationPRO-II • User ’ s Guide 53 4. Menu Orientation Effects Menu bÑÑÉÅíë=jÉåì The figure below illustra tes a sample Effect s Menu : Figure 4-25. Effects Menu (sample) The Effect s Me nu allows you to modify and manage effects, includi ng the ability to set the transition type, rate and wipe pattern.
54 Present ationPRO-II • Us er ’ s Guide 4. Menu Orientation Status Men u pí~íìë=jÉåì The Sta tu s Me n u provides basic software version informa tion, as shown in the sample menu below: Figure 4-26.
PresentationPRO-II • User ’ s Guide 55 4. Menu Orientation Display Settings Menu aáëéä~ó=pÉííáåÖë=jÉåì The Display Settings Menu enables you to adjust the disp lays brightness and contrast, as well as calibrate the display . A sample menu is shown belo w: Figure 4-27.
56 Present ationPRO-II • Us er ’ s Guide 4. Menu Orientation Display Settings Menu hÉóé~Ç=_~ÅâäáÖÜí=jÉåì From the Display Settin gs Men u , pr ess { LI GHT A DJUST } to display the Keyp ad Backlight Me nu , which enables you to adjust t he backlight of all “dim” fr ont panel buttons.
PresentationPRO-II • User ’ s Guide 57 4. Menu Orientation PIP Adjustment Menu mfm=^ÇàìëíãÉåí=jÉåì The following topics are di scussed in this section: • PIP Adjustment Menu T ree .
58 PresentationPRO-II • User ’ s Guide 4. Menu Orientation PIP Adjustment Menu mfm=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample PIP Adjustment Menu : Figure 4-30. PIP Adjustment Menu (sample) The PIP Adjustment Menu provides tools that enable you to adjust th e active PIP .
PresentationPRO-II • User ’ s Guide 59 4. Menu Orientation PIP Adjustment Menu • Press { SRC } to display the Input Source Adjustment Menu . Refer to the “ Input Source Adjustment Menu ” se ctio n on page 71 fo r details. • Press { BORDER } to display the Border Menu .
60 PresentationPRO-II • User ’ s Guide 4. Menu Orientation PIP Adjustment Menu _çêÇÉê=jÉåì From the PIP Adjustment Menu , the Input Source Adjustment Menu , the Shadow Menu or the Image Effect s Menu , press { BORDER } to display the Border Menu , a sample of which i s shown below .
PresentationPRO-II • User ’ s Guide 61 4. Menu Orientation PIP Adjustment Menu `êçé=jÉåì From the PIP Adjustment Menu , the Input Source Ad justment Menu , the Ke y Menu , or the Key Adjustment Menu , press { CROP } to display the Crop Menu .
62 PresentationPRO-II • User ’ s Guide 4. Menu Orientation PIP Adjustment Menu • Press { PIP } to return to the PIP Ad justment M enu . Refer to the “ PIP Adjustment Menu Functions ” section on page 58 for details.
PresentationPRO-II • User ’ s Guide 63 4. Menu Orientation PIP Adjustment Menu • Press { BORDER } to display the Border Menu . Refer to the “ Border Menu ” section on page 60 for details. • Press { EFX } to display the Image Effect s Menu .
64 PresentationPRO-II • User ’ s Guide 4. Menu Orientation PIP Adjustment Menu • Hue — adjusts the image’s hue, by rotating color vectors throughout the 360 degree color spectrum. • Mode — In the “ Strob e ” section, e nables or disables the st robe mode which when enabled, acts as a programmable freeze .
PresentationPRO-II • User ’ s Guide 65 4. Menu Orientation Key Menu hÉó=jÉåì The following topics are di scussed in this section: • Key Menu T ree • Key Menu De sc r ip tion • Key Menu Functions • Key Sub Menus hÉó=jÉåì=qêÉÉ The figure below ill ustra tes the Key Menu tree: Figure 4-35.
66 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Key Menu hÉó=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample Key Menu : Figure 4-36. Key Menu (sample ) The Key Menu provides tools to adjust the active key . T o access the me nu: • Press the KEY button in the Layer Functi on Section .
PresentationPRO-II • User ’ s Guide 67 4. Menu Orientation Key Menu • Fill Source — determines the vid eo that fills the key hole: ~ Self — fills the hole with the key source video itself, for example, th e video from a character generator .
68 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Key Menu j~ííÉ=jÉåì From the Key Menu or the Key Adjustment Me nu , press { MA TTE } to display the Matte Menu , a sample of which is shown be low. Figure 4-37. Matte Menu (sample) The Matte Menu e nables you to adjust t he fill color of a matte key .
PresentationPRO-II • User ’ s Guide 69 4. Menu Orientation Key Menu hÉó=^ÇàìëíãÉåí=jÉåì From the Key Menu and the Matte Menu , press { SIZE & POS } to display the Key Adjustment Menu , a sample of which is shown below . Figure 4-38.
70 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Key Menu ~ Adjust V SIZE to adjust only the vertical size, leaving the horizontal size as is. In this way , you can stretch the Key vertically . Note T o return the Key to its default size and aspe ct ratio, press the RESET button in the Layer Functions Section .
PresentationPRO-II • User ’ s Guide 71 4. Menu Orientation Input Source Adjustment Menu fåéìí=pçìêÅÉ=^ÇàìëíãÉåí=jÉåì The following topics are di scussed in this section: • I.
72 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Input Source Adjustment Menu fåéìí=pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample Input Source A djustment Menu : Figure 4-40.
PresentationPRO-II • User ’ s Guide 73 4. Menu Orientation Input Source Adjustment Menu • Enable { TRACK SIZE } to lock H Size an d V Size togethe r . Regardless o f the input source’s current aspect ratio, its size will adjust proportionall y when you adjust either H or V size.
74 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Background/DSK In put Setup Menu _~ÅâÖêçìåÇLaph=fåéìí=pÉíìé=jÉåì The following topics are di scussed in this section: .
PresentationPRO-II • User ’ s Guide 75 4. Menu Orientation Background/DSK Input Se tup Menu _~ÅâÖêçìåÇLaph=fåéìí=pÉíìé=jÉåì=aÉëÅêáéíáçå The Background/DSK Input Setup Me nu defines the use of the BG/DSK button — e ither as an unscaled background ( BG ) or as an unscaled downstream key ( DSK ).
76 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Background/DSK In put Setup Menu _~ÅâÖêçìåÇLaph=fåéìí=pÉíìé=jÉåì=cìåÅíáçåë The figure below illustra tes a sample Background/DSK Input Setup Menu : Figure 4-43.
PresentationPRO-II • User ’ s Guide 77 4. Menu Orientation Background/DSK Input Se tup Menu • Matte color can be adjusted in each mode. ~ In BG mode, if Matte is selected as the Ty p e , use the { MA TTE } button. ~ In DSK mode, if DVI is selected as the Ty p e , use the { BG MA TTE } button.
78 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Background/DSK In put Setup Menu • Blue — adjust t he blu e component of the background mat te color as required, from 0 to 1024.
PresentationPRO-II • User ’ s Guide 79 4. Menu Orientation Background/DSK Input Se tup Menu • Press { MA TTE } to disp lay the DSK Matte Adjustment Menu . This softkey only appears when the Fill Source is set to M a tte. Refer to the “ DSK Matte Adjustment Menu ” section on page 79 f or details.
80 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Frame Grab Menu cê~ãÉ=dê~Ä=jÉåì The figure below illustra tes a sample Frame Grab Menu : Figure 4-47. Frame Grab Menu ( samp le) The Frame Grab Menu enables you to capture still frames into the system’ s three internal frame stores.
PresentationPRO-II • User ’ s Guide 81 4. Menu Orientation Frame Grab Menu T o access the Frame Grab Menu , use one of t he following methods: • Press { FRAME GRAB } from the BG/DSK Input Setup Menu , when “T ype” is set to DVI (in both the BG and DSK modes).
82 PresentationPRO-II • User ’ s Guide 4. Menu Orientation LOGO Input Se tu p Me nu ildl=fåéìí=pÉíìé=jÉåì The figure below illustra tes a sample LOGO Input Setup Men u : Figure 4-49. LOGO Input Setup Menu (sample) The LOGO In put Setup Menu enables you t o select the full screen source for the panel’s LOGO button.
PresentationPRO-II • User ’ s Guide 83 4. Menu Orientation Remote Control Menu oÉãçíÉ=`çåíêçä=jÉåì The figure below illustra tes a sample Remote Co nt ro l M en u : Figure 4-50.
84 PresentationPRO-II • User ’ s Guide 4. Menu Orientation Remote Control Menu • Remote Control — e nables or disables remote control. ~ When remote control is on, the { HOME } buttons disappears, th e PresentationPRO-II front panel is disabled, and all control originates from the external cont ro ller ’s console.
PresentationPRO-II • User ’ s Guide 85 RK==pó ëí Éã=p Éíìé få=qÜáë=`Ü~éíÉê This chapter provides detailed instructions for setting up the PresentationPRO-II system.
86 PresentationPRO-II • User ’ s Guide 5. System Setup Setup Prerequisites pÉíìé=mêÉêÉèìáëáíÉë Please note the following important setup prereq uisites: • Ensure that you are familiar with T ouch Screen operations. In Chapter 2, refer to the “ T ouc h Screen Menu S ection ” heading on page 17 for instru ctions.
PresentationPRO-II • User ’ s Guide 87 5. System Setup Return to Facto ry Default oÉíìêå=íç=c~Åíçêó=aÉÑ~ìäí Prior to starting your setup procedures, it is recommended that you perform a factory reset. This procedure guarantees th at any previous setups (e.
88 PresentationPRO-II • User ’ s Guide 5. System Setup Output Setup lìíéìí=pÉíìé Please note the following important out put setup prerequisite: • Ensure that you kn o w yo ur p ro j ect o r’s nati ve resolu tio n . Refe r to yo ur pro j ec tor’s technical manua l for details.
PresentationPRO-II • User ’ s Guide 89 5. System Setup Quick Input Setup Procedure e. Press { BACK } to return to the Output Menu . 3. Press { SETTINGS } to display the Sett ings Menu . a. Scroll to the Sync Out line and set the desi red sync value.
90 PresentationPRO-II • User ’ s Guide 5. System Setup Comprehen siv e Input Setup Please note: • When all inputs have been acquired and saved, the Input Ac quisition M enu will only re-appear in case of LOS (Loss o f Signal), or a mismatch b etween the saved file and incoming video.
PresentationPRO-II • User ’ s Guide 91 5. System Setup Comprehensive Input Setup f. If required, scrol l to the Col or Sp ace line and set the input ’s color space. Choices include SMPTE and RGB . Note that the system may automatically set the Co lor Sp ace based on th e selected Format .
92 PresentationPRO-II • User ’ s Guide 5. System Setup Comprehen siv e Input Setup 6. Press { AR } to access the Aspect Ratio Menu . a. Scroll to the Mode line an d select 16:9 , 5:4 , 4:3 , 3:2 , 1:1 or Custom aspect ratios. b. If Custom is selected, scroll to the Ratio line and enter a custo m aspect ratio as desired.
PresentationPRO-II • User ’ s Guide 93 5. System Setup Setting up the Background pÉííáåÖ=ìé=íÜÉ=_~ÅâÖêçìåÇ With PresentationPRO-II, you can use the DVI inpu t, a matte color , or a still frame as the background source .
94 PresentationPRO-II • User ’ s Guide 5. System Setup Setting up the Background rëáåÖ=~=j~ííÉ=`çäçê=~ë=íÜÉ=_~ÅâÖêçìåÇ This procedure enables you to set up t he background as a matte color th at can be used behind a PIP or Key .
PresentationPRO-II • User ’ s Guide 95 5. System Setup Setting up the Background 9. For the two Crop settings: ~ If the input resolut i on mat ches the output resoluti on, or if the output resolution is larger t han the input resolution, the Crop setting s will be bracketed.
96 PresentationPRO-II • User ’ s Guide 5. System Setup Setting up the DSK pÉííáåÖ=ìé=íÜÉ=aph With Present ationPRO-II, you can us e the DVI input or a still frame as the DSK source. Y ou can also chang e which source you use for t he DSK durin g the course of a live production — provided that the DSK has been properly set up.
PresentationPRO-II • User ’ s Guide 97 5. System Setup Setting up the DSK rëáåÖ=~=píáää=cê~ãÉ=~ë=íÜÉ=aph This procedure enable s you to capture a st ill fram e image a nd assign it as th e “type” for the DSK . Please note: • As a recommendation, capture still frames int o “temporary” memory as a setup procedure.
98 PresentationPRO-II • User ’ s Guide 5. System Setup Setting up the LOGO pÉííáåÖ=ìé=íÜÉ=ildl With Present ationPRO-II, you can set t he LOGO source as a captured st ill frame, or leave it as Black (the default setting upon fa ctory reset).
PresentationPRO-II • User ’ s Guide 99 SK==léÉê ~íáçåë få=qÜáë=`Ü~éíÉê This chapter includes operati ona l instruct ions fo r all PresentationPRO-II modes and functions.
100 PresentationPRO-II • User’s Guide 6. Operations Prerequisites mêÉêÉèìáëáíÉë Prior to using the Pr esentationPRO-II system in a live event, please ensure the following: • All system inputs, background (or DSK) and the LOGO are properly configured.
PresentationPRO-II • User ’ s Guide 101 6. Operations Operational Conf iguration léÉê~íáçå~ä=`çåÑáÖìê~íáçå The following topics are di scussed in this section: • Monitor Layout • T ouch Screen Calibrat ion • A Word About LOS jçåáíçê=i~óçìí Use the following diagram as a re commended layout for your monit or .
102 PresentationPRO-II • User’s Guide 6. Operations Working with Layers tçêâáåÖ=ïáíÜ=i~óÉêë The following topics are di scussed in this section: • Working with PIPs • Modifying P.
PresentationPRO-II • User ’ s Guide 103 6. Operations Working with Layers 5. Adjust the PIP’s size, position, border , shadow , source image, cropping an d "special effects" as desired. Re fer to the “ Modifying PIPs “ section on page 104.
104 PresentationPRO-II • User’s Guide 6. Operations Working with Layers 4. In the Layer Functions Section , press TRANS . The current PIP transitions off and the ne w KEY trans itions on.
PresentationPRO-II • User ’ s Guide 105 6. Operations Working with Layers tçêâáåÖ=ïáíÜ=hÉóë With PresentationPRO-II, you can perfo rm the following types of Key transitions: • T ran.
106 PresentationPRO-II • User’s Guide 6. Operations Working with Layers oÉãçîáåÖ=~=hÉó=Ñêçã=mêçÖê~ã Use the following steps to remove a Key from Program: 1. Ensure that you have preset t he desired transition type and rate. Refer to the " Working with T ransitions " section on page 1 15 for details.
PresentationPRO-II • User ’ s Guide 107 6. Operations Working with Layers jçÇáÑóáåÖ=hÉóë=~åÇ=aphë Use the following steps to modify a Key or DSK: S Assumption : A Key (or DSK) is currently on Program.
108 PresentationPRO-II • User’s Guide 6. Operations Working with Layers _~ÅâÖêçìåÇ=~åÇ=aph=qê~åëáíáçåë With PresentationPRO-II, you can perfo r m the following types of backgrou.
PresentationPRO-II • User ’ s Guide 109 6. Operations Working with Layers qê~åëáíáçåáåÖ=íç=~=j~ííÉ=`çäçê The PresentationPRO-II system enables you to transition from any BG or DSK mode to a matte color — or from a matte color to another matte c olor .
1 10 PresentationPRO-II • User’s Guide 6. Operations Working with Layers 5. Scroll to the Ty p e line and sele ct FG _1 , FG_2 or FG_3 . The current backg round will not chan g e . 6. In the Layer Function s Section , press TRANS . The TRANS button lights during the interval, and at t he conclu sion of the transi ti on, the Home Menu appears.
PresentationPRO-II • User ’ s Guide 1 1 1 6. Operations Working with Layers 6. In the Layer Function s Section , press TRANS . The TRANS button lights during the interval, and at t he conclu sion of the transi ti on, the Home Menu appears. 7. Modify the DSK as required.
1 12 PresentationPRO-II • User’s Guide 6. Operations Working with Layers Use the following steps to clear the background or the DSK fro m Progra m. 1. Ensure that you have preset t he desired transition type and rate. Refer to the " Working with T ransitions " section on page 1 15 for details.
PresentationPRO-II • User ’ s Guide 1 13 6. Operations Working with Layers ildl=qê~åëáíáçåë With PresentationPRO-II, you can perfo r m the following types of LOGO t ra nsit ions: • T ra.
1 14 PresentationPRO-II • User’s Guide 6. Operations Working with Layer Funct ions tçêâáåÖ=ïáíÜ=i~óÉê=cìåÅíáçåë The following topics are di scussed in this section: • Using .
PresentationPRO-II • User ’ s Guide 1 15 6. Operations Working with Transiti ons tçêâáåÖ=ïáíÜ=qê~åëáíáçåë Use the following steps to perform a Mix (or "dissolve"): 1. Set up the desired PIP , Key , BG , DSK or LOGO transition in the normal manner.
1 16 PresentationPRO-II • User’s Guide 6. Operations Using Remote Control rëáåÖ=oÉãçíÉ=`çåíêçä When PresentationPRO-II is controlled f rom an external controller , the Remote Cont rol Menu is used to set the unit ID and enable/disable remote con trol itself.
PresentationPRO-II • User ’ s Guide 1 17 6. Operations Capturing Still F rames `~éíìêáåÖ=píáää=cê~ãÉë The following topics are di scussed in this section: • Still Frame Capture Ov.
1 18 PresentationPRO-II • User’s Guide 6. Operations Capturing Still Frames Please note: • The captured still(s) can now be a ssigned as the input “type” for BG , DSK or LOGO . In Chapter 5, refer to the " Using a S till Frame as the Background " section on page 95 for instructi ons.
PresentationPRO-II • User ’ s Guide 1 19 6. Operations Capturing Still F rames p~îáåÖ=píáää=cê~ãÉë=áå=mÉêã~åÉåí=jÉãçêó Use the following steps to save a captured still in to permanent memory . 1. Capture a sti l l as out li n e d in th e previous two sections.
120 PresentationPRO-II • User’s Guide 6. Operations Capturing Still Frames.
PresentationPRO-II • User ’ s Guide 121 ^ K==p éÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ This appendix provides detailed techni cal spec if ications for the PresentationPR O-I I.
122 PresentationPRO-II • User’s Guide ^K==péÉÅáÑáÅ~íáçåë Scaled Video Channel Input Specif ications pÅ~äÉÇ=sáÇÉç=`Ü~ååÉä=fåéìí=péÉÅáÑáÅ~íáçåë= The table below lists PresentationPRO-II sc aled video chan nel input specifications.
PresentationPRO-II • User ’ s Guide 123 ^K==péÉÅáÑáÅ~íáçåë Output Specifica ti ons lìíéìí=péÉÅáÑáÅ~íáçåë= The table below lists Presentati onPRO-II output specificatio ns. rëÉê=`çåíêçä= The table below lists PresentationPRO -II user control specificat ions.
124 PresentationPRO-II • User’s Guide ^K==péÉÅáÑáÅ~íáçåë Physical and Electrical Specifications mÜóëáÅ~ä=~åÇ=bäÉÅíêáÅ~ä=péÉÅáÑáÅ~íáçåë= The table below lists PresentationPRO-II physical and ele ctrical specifications.
PresentationPRO-II • User ’ s Guide 125 ^K==péÉÅáÑáÅ~íáçåë Pinouts máåçìíë= The following topics are di scussed in this section: • DVI Connecto r Pinouts • Analog 15-pin D Connector • Ethernet Connect or • Serial Connec tor asf=`çååÉÅíçê=máåçìíë The figure below illustra tes the DVI connector: Figure A-1.
126 PresentationPRO-II • User’s Guide ^K==péÉÅáÑáÅ~íáçåë Pinouts ^å~äçÖ=NRJéáå=a=`çååÉÅíçê The figure below illustra tes the analog 15-pin D connector: Figure A-2. Analog 15-pin D Connecto r The table below lists Analog 15-pin D connector pinouts.
PresentationPRO-II • User ’ s Guide 127 ^K==péÉÅáÑáÅ~íáçåë Pinouts bíÜÉêåÉí=`çååÉÅíçê The figure below illustra tes the Ethernet connector: Figure A-3. Ethernet Connector The table below lists Ethernet connector pinouts.
128 PresentationPRO-II • User’s Guide ^K==péÉÅáÑáÅ~íáçåë Pinouts pÉêá~ä=`çååÉÅíçê The figure below illustra tes the Serial connector: Figure A-4. Serial Connector The table below lists Serial connector pinouts. T able A-10.
PresentationPRO-II • User ’ s Guide 129 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons fåéìí=~åÇ=lìíéìí=oÉëçäìíáçåë This section prov ides a comprehensive list o.
130 PresentationPRO-II • User’s Guide ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons • 1024x768 @85 • 1 152x864 @75 • 1280x768 @47.95 • 1280x768 @48 • 1280x768 @50 • 1280x768 @59.94 • 1280x768 @75 • 1280x960 @50 • 1280x960 @59.
PresentationPRO-II • User ’ s Guide 131 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons • 1600x1200 @59.94 • 1600x1200 @60 • 1280x720p @50 • 1280x720p @59.94 • 1280x720p @60 • 1920x1080p @23.98 • 1920x1080p @24 • 1920x1080p @25 • 1920x1080p @29.
132 PresentationPRO-II • User’s Guide ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons.
PresentationPRO-II • User ’ s Guide 133 _K==` çåí ~Å í=fåÑ çê ã~íáçå få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appendix: • Wa r r a n t y • Return M.
134 PresentationPRO-II • User’s Guide _K==`çåí~Åí=fåÑçêã~íáçå Contact Informat io n `çåí~Åí=fåÑçêã~íáçå Barco Events USA/Barco Folsom, LLC 1 1 1 01 T r ade Ce nter Drive Rancho C ordova, Californ ia 95670 USA • Phone: (916) 859-2500 • Fax: (916) 859-2515 • Websites: ~ www .
PresentationPRO-II • User ’ s Guide 135 `K==réÖê ~ÇáåÖ=pçÑí ï ~ê É få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appendix: • Software Upgrade Overview • .
136 PresentationPRO-II • User’s Guide `K==réÖê~ÇáåÖ=pçÑíï~êÉ Software Upgrade Overview pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï Firmware files for the PresentationPRO-II syst em are loaded into the hardwa r e at power- up.
PresentationPRO-II • User ’ s Guide 137 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Serial Upgrade Method g. After the download is complet e, navigate to the target folder and double - click the EXE to launch th e inst allation shield. h. Follo w the prompts to install the upgrade package in the desired folder .
138 PresentationPRO-II • User’s Guide `K==réÖê~ÇáåÖ=pçÑíï~êÉ Serial Upgrade Metho d • TXD and RXD shoul d be green . They will flash if Enter is pressed. Figure C-2. Flash Loader St atus Lights, Normal Condition c. Press Enter a few times to display the system prompt “ # ” on screen.
PresentationPRO-II • User ’ s Guide 139 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrad e Method 13. It takes approximately 6 minutes to load the flas h me mory using the Serial method. When complete, the Flash Lo ader utility displays the “ Upload Complete ” message.
140 PresentationPRO-II • User’s Guide `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrade Method f. When the Save As Dial og appears, navigate t o the desired folder (or create a new one) and click Save . g. After the download is complet e, navigate to the target folder and double - click the EXE to launch th e inst allation shield.
PresentationPRO-II • User ’ s Guide 141 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrad e Method 10. Note the status of the Local Area Connection, as shown below . Figure C-5. Network and Dia l-up Connections Window (sample) ~ If the status is “ disabled ,” contact your netwo r k administrator .
142 PresentationPRO-II • User’s Guide `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrade Method 13. Check the “ Use the followin g IP address ” check box, as shown below . Figure C-7. Internet Protocol (TCP/IP) Proper ties Dialog (sample) 14.
PresentationPRO-II • User ’ s Guide 143 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrad e Method 19. T o connect to the PresentationPRO-II serial port: a. Click St ar t > Programs > Accessor ies > Communications > HyperT erminal to launch the HyperT erminal application.
144 PresentationPRO-II • User’s Guide `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrade Method 23. Click Communicati on > Et hernet > Connect to display the Ethernet Connection dialog. Figure C-9. Ethernet Connection Dialog (sample) 24. In the dialog, enter th e IP address of the PresentationPRO-II: 192.
PresentationPRO-II • User ’ s Guide 145 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrad e Method qêçìÄäÉëÜççíáåÖ=bíÜÉêåÉí=`çããìåáÅ~íáçåë Use the following steps to determi ne the IP address of the PresentationPRO-II, and establish proper communications: 1.
146 PresentationPRO-II • User’s Guide `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrade Method 7. In the DOS co mmand window , type: ping 192.168.0.10 ... and press Enter . ~ If the computer is able to su ccessfully communi cate with the PresentationPRO-II, you will se e a se ries of “ replies ” from the target IP address.
PresentationPRO-II • User ’ s Guide 147 fåÇÉ ñ ô=jÉåì=_ìíí çåë=õ {AR} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 38 {BORDER} . . . . . . . . . . . . . . . . . . . 59, 60, 61, 63 {CAPTURE} . . . . . . . . . . . .
148 PresentationPRO-II • User’s Guide Index input setup menu functions . . . . . . . . . . . 76 input setup menu tree . . . . . . . . . . . . . . . . 74 Backlight, butto ns . . . . . . . . . . . . . . . . . . . . . . 56 Baud Rate . . . . . . . . .
PresentationPRO-II • User ’ s Guide 149 Index matte adjustmen t menu . . . . . . . . . . . . . . 79 opac ity . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 setup . . . .
150 PresentationPRO-II • User’s Guide Index program EDID . . . . . . . . . . . . . . . . . . . . . 93 reesta blish local cont rol . . . . . . . . . . . . . 1 16 remove Key fro m program . . . . . . . . . . . 106 remove PIP from program . . . . . .
PresentationPRO-II • User ’ s Guide 151 Index type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 LOS background . . . . . . . . . . . . . . . . . . . . . . . 101 DSK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 loss of signal .
152 PresentationPRO-II • User’s Guide Index key still frame in DSK mode . . . . . . . . . . 1 10 modify PIPs . . . . . . . . . . . . . . . . . . . . . . 104 modifying keys . . . . . . . . . . . . . . . . . . . . 107 prerequisite s . . . . . . . . .
PresentationPRO-II • User ’ s Guide 153 Index RESET button . . . . . . . . . . . . . . . . . . . . . . . . . 20 Resolution speci fications, inpu t and output . . 129 Return material authorization . . . . . . . . . . . . . 133 RMA . . . . . . . . .
154 PresentationPRO-II • User’s Guide Index Te s t p attern men u descript ion . . . . . . . . . . . . . 42 patte rn type . . . . . . . . . . . . . . . . . . . . . . . . 42 T ouch screen . . . . . . . . . . . . . . . . . . . . . . . . 3, 17 calibration .
Een belangrijk punt na aankoop van elk apparaat Barco 26-0405000-00 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Barco 26-0405000-00 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Barco 26-0405000-00 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Barco 26-0405000-00 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Barco 26-0405000-00 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Barco 26-0405000-00 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Barco 26-0405000-00 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Barco 26-0405000-00 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
