Gebruiksaanwijzing /service van het product 9200 van de fabrikant Barco
Ga naar pagina of 53
OWNER'S MANUAL R9001320 GRAPHICS 9200.
.
BARCO PROJECTION SYSTEMS Date : 030798 OWNER'S MANUAL Rev : 01 R9001320 GRAPHICS 9200 Art. No. : R5975947.
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, July 1998. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.
Table of Contents i-1 5975947 BARCOGRAPHICS 9200 120297 TABLE OF CONTENTS i TABLE OF CONTENTS .............................................................................................................. ..............................................
Table of Contents i-2 5975947 BARCOGRAPHICS 9200 120297 Geometry ....................................................................................................................................................................................... 9 - 8 Shift .
1-1 Unpacking and Dimensions 5975288 BARCOGRAPHICS 8200 030798 1 Pull To op en L UNP ACKING AND DIMENSIONS Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table.
1-2 Unpacking and Dimensions 5975288 BARCOGRAPHICS 8200 030798 310a.D RW Battery installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord.
2-1 Installation Guidelines 5975967 BARCOGRAPHICS 9200 120297 2 INST ALLA TION GUIDELINES Installation guidelines Careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system.
2-2 Installation Guidelines 5975967 BARCOGRAPHICS 9200 120297 B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of projector (without feed) and middle of the lens.
3-1 Location and Functions of Control 5975967 BARCOGRAPHICS 9200 030798 3 RS 232 IN REMOT E PROJECTOR M ODE : GREEN - OP ERATIO N RED - ST ANDBY COMMUNI CAT I O N PORT (8 00- PE RI PHERAL S) RS232 OUT IR- A CK NO WLE DG ED IR-RECEIVED DI AG NOS T IC S CODE IR-R ECEIVER 0 I This devi ce complies wi th Par t 15 of the FCC rul es.
3-2 Location and Functions of Control 5975967 BARCOGRAPHICS 9200 030798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 32a - + ? COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXI T PAUSE b. Remote control This remote control includes a battery powered infrared (IR) trans- mitter that allows the user to control the projector remotely.
Installation Set Up 4-1 5975967 BARCOGRAPHICS 9200 221297 4 INST ALLA TION SET UP The projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER .
Installation Set Up 4-2 5975967 BARCOGRAPHICS 9200 221297.
Connections 5-1 5975967 BARCOGRAPHICS 9200 221297 5 R G BV RGB H / C V On 98 27910 RGB H / C V H RS 232 I N REMO TE PROJ ECTOR MODE : GREE N - OPERA TI ON RED - STANDBY COMMU NIC AT ION P ORT (800- PERIPHERALS) RS 232 OUT IR- AC KNO WL EDGE D IR-RECEIVED DIA GNO S TIC S CODE IR -RECEIV ER 0 I This dev ice c omplies wi th Part 15 of the FCC rules.
Connections 5-2 5975967 BARCOGRAPHICS 9200 221297 0 I WARNING Lamp run time is 1000 hours Operating the lamp longer than 1000 hours may damage the projector.
Connections 5-3 5975967 BARCOGRAPHICS 9200 221297 S- VI DEO 98 27900 VI DEO LR AUDI O On On Video input Audio input not available S-Video input Floati ng Non-Floating TV t une r , e.
Connections 5-4 5975967 BARCOGRAPHICS 9200 221297 R G B H / C V On 98 27910 Vert. sync Hor. sync or Composite sync Blue Green Red Float i ng Non-Fl oati ng R G BV RGB H / C V On 98 27 91 0 RGB H / C V.
Connections 5-5 5975967 BARCOGRAPHICS 9200 221297 R- Y Y B- Y S On 98 27 930 Sync Blue - luma Luma Red - luma Select with or then <ENTER> <EXIT> to return.
Connections 5-6 5975967 BARCOGRAPHICS 9200 221297 Straps on module level : Floating or non-floating input. R-Y : J3 : strap "yes" : non floating strap "no" : floating Y : J4 : stra.
Connections 5-7 5975967 BARCOGRAPHICS 9200 221297 Straps on module level : Floating or non-floating input. Red : J3 : strap "yes" : non floating strap "no" : floating Green : J4 : .
Connections 5-8 5975967 BARCOGRAPHICS 9200 221297 Connecting a RCVDS 05 to the projector. - Up to 10 inputs (20 when video inputs) with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module. - Serial communication with the projector.
6-1 Controlling 5975967 BARCOGRAPHICS 9200 221297 6 RGB V RGB H / C V On 98 2791 0 R G B H / C V H RS 232 IN REMO TE PROJECTO R MODE : GR EEN - OP ERAT I ON RED - STANDB Y C OMMUNICATION PORT (80 0 -PERIPHERAL S) RS232 OU T IR- ACKNO WLEDG ED IR -R ECEI VE D DIA GNO STI CS COD E IR-RECEIVER 0 I This device complies with Pa rt 15 of the FCC rules.
6-2 Controlling 5975967 BARCOGRAPHICS 9200 221297 0 127 How to Display a Projector Address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds.
7-1 Start up of the Adjustment Mode 5975967 BARCOGRAPHICS 9200 221297 7 Adjustment Mode All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode' . Press the ADJUST or ENTER key to enter the 'Adjustment mode'.
7-2 Start up of the Adjustment Mode 5975967 BARCOGRAPHICS 9200 221297.
8-1 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 8 RANDOM ACCESS ADJUSTMENT MODE ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with or then <ENTER> <EXIT> to return.
8-2 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Highlight File Service by pushing the control disc up or down and press ENTER to select.
8-3 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 The file name will be displayed in the upper right corner. The following items can be adjusted : Total quantity horizontal pixels Ac.
8-4 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Select with or <ENTER> to toggle or to change value <EXIT> to return EDIT FILE OPTIONS Source number 1 Clamp position [leading] Clamp width [1] Field polarity inverted [no] Vertical refresh [sync] Vert.
8-5 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Rename To change the name of a selected file. Use the control disc to select RENAME and press ENTER .
8-6 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Delete To delete a selected file out of the list of files.
8-7 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 Sync slow/fast Highlight sync by pushing the control disc up or down and press ENTER to toggle between SLOW and FAST. Still Video This function is only used for stationary interlaced images.
8-8 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Select with or then <ENTER> <EXIT> to return. 3 GAMMA = 2.2 Geometry Highlight Geometry by pushing the control disc up or down and press ENTER to select the geometry selection menu.
8-9 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 Select with or then <ENTER> <EXIT> to return. Bottom bl anki ng Top bl anki ng Rig ht blank ing Left blank ing GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING OPTIONS Select with or then <ENTER> <EXIT> to return.
8-10 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Adjustment of the blanking on the top of the image Adjustment of the blanking on the bottom of the image Correct by pushing the con.
9-1 Installation Mode 5975957 BARCOGRAPHICS 9200 221297 9 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. INST ALLA TION MODE Starting up the Installation Mode Push the control disc up or down to highlight Installation and then press ENTER .
9-2 Installation Mode 5975967 BARCOGRAPHICS 9200 221297 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return.
9-3 Installation Mode 5975957 BARCOGRAPHICS 9200 221297 The three alignments influence each other, therefore repeat if neces- sary the above three steps (b,c and d). When the green pattern is correctly focused, press EXIT to return to the Convergence menu.
9-4 Installation Mode 5975967 BARCOGRAPHICS 9200 221297 Select with or then <ENTER> <EXIT> to return. Configuration Highlight "Configuration" by pushing the control disc up or down and press ENTER to select. For more information, see Projector configuration in chapter 4 : 'Installation Set Up'.
Service Mode 11-1 5975947 BARCOGRAPHICS 9200 120297 SERVICE MODE 10 Starting up the Service Mode Push the control stick forward or backward to highlight Service and then press ENTER . Some items in the Service mode are password protected (when the password function is active).
Service Mode 11-2 5975947 BARCOGRAPHICS 9200 120297 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY LAMP POWER : 1500W MORE... Select with or then <ENTER> <EXIT> to return.
Service Mode 11-3 5975947 BARCOGRAPHICS 9200 120297 Change Password This item is password protected when the password strap is installed. How to enable or disable the password function ? The password function is enabled when the password strap on the controller module is installed.
Service Mode 11-4 5975947 BARCOGRAPHICS 9200 120297 How to change the password ? Highlight Change password by pushing the control stick forward or backward and press ENTER to display the Change Password menu. Select with or then <ENTER> <EXIT> to return.
Service Mode 11-5 5975947 BARCOGRAPHICS 9200 120297 The following baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 The actual baud rate will be highlighted. To change the baud rate, push the control stick forward or backward and press ENTER to accept the new baud rate setting.
Service Mode 11-6 5975947 BARCOGRAPHICS 9200 120297 Select with or then <ENTER> <EXIT> to return. SERVICE PANEL ADJUSTMENTS PRESET INPUT BALANCE 60Hz TRACKING I2C DIAGNOSIS MORE... Panel Adjustments Changing these settings may seriously affect the perform- ance of the projector.
Appendix A : Standard Source Set Up Files A-1 5975947 BARCOGRAPHICS 9200 120297 A ST ANDARD SOURCE SET UP FILES Name : name of file, contains the settings Resolution : image resolution, when fol- lowed by ...I means interlaced. FVERT Hz : vertical frequency of the source FHOR kHz : horizontal frequency of the source.
Appendix A : Standard Source Set Up Files A-2 5975947 BARCOGRAPHICS 9200 120297 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z XGA_72 1024 X 768 71,955 58,140 80,000 1376 1024 808 768.
B-1 Lenses 5975967 BARCOGRAPHICS 9200 221297 B LENSES Focusing the lens Loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : Do not turn out the lens too far, otherwise it will fall out of the lens holder.
B-2 Lenses 5975967 BARCOGRAPHICS 9200 221297 e m a N s n e l h t g n e L ) h c n i ( m m s n e l . m a i d ) h c n i ( m m t h g i e w ) s b l ( g k r e b m u n r e d r o ) 1 : 2 . 1 ( D H) 6 9 . 9 ( 3 5 2) 4 4 . 7 ( 9 8 1) 2 . 9 1 ( 7 . 80 0 2 9 2 8 9 R ) 1 : 2 .
C-1 Source Numbers 90 - 99 5975947 BARCOGRAPHICS 9200 030798 C SOURCE NUMBERS 80 - 89 AND 90 - 99 Projector without any 800 peripheral connected. The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers.
C-2 Source Numbers 90 - 99 5975947 BARCOGRAPHICS 9200 030798 Source numbers 81 - 84 Only valid if no input module is connected to slot 81 - 84 of a RCVDS05. The source numbers 81 - 84 correspond to the physical inputs 1 - 4 of the projector. e.g. When slot 1 of the projector has to be selected, key in source number 81.
5975967 BARCOGRAPHICS 9200 221297 3.
Een belangrijk punt na aankoop van elk apparaat Barco 9200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Barco 9200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Barco 9200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Barco 9200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Barco 9200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Barco 9200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Barco 9200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Barco 9200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
